中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 42667-2023 精细陶瓷室温等双轴弯曲强度试验方法 双环法(中英文版) Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method |
|||
GB/T 42665-2023 多孔陶瓷球形压痕强度试验方法(中英文版) Test method for spherical indentation strength of porous ceramics |
|||
GB/T 42910-2023 无机胶粘剂高温压缩剪切强度试验方法(中英文版) Test method for high temperature compression shear strength of inorganic adhesives |
|||
GB/T 42661-2023 金属和合金的腐蚀 模拟海洋环境中钢筋应力腐蚀敏感性试验方法(中英文版) Corrosion of metals and alloys Test method for stress corrosion susceptibility of steel bars in simulated marine environment |
|||
GB/T 26140-2023 无损检测 残余应力测量的中子衍射方法(中英文版) Nondestructive Testing - Neutron Diffraction Method for Residual Stress Measurement |
|||
GB/T 22640-2023 铝合金应力腐蚀敏感性评价试验方法(中英文版) Test method for evaluation of stress corrosion susceptibility of aluminum alloy |
|||
GB/T 22309-2023 道路车辆 制动衬片 盘式制动块总成和鼓式制动蹄总成剪切强度试验方法(中英文版) Road vehicles - Brake linings - Test methods for shear strength of disc brake pad assemblies and drum brake shoe assemblies |
|||
GB/T 1965-2023 多孔陶瓷 室温弯曲强度试验方法(中英文版) Porous ceramics - test method for room temperature flexural strength |
|||
GB/T 1964-2023 多孔陶瓷 室温压缩强度试验方法(中英文版) Porous ceramics - Test method for compressive strength at room temperature |
|||
GB/T 43413-2023 无损检测 红外热成像检测 热弹性应力测量方法通则(中英文版) Non-destructive testing Infrared thermal imaging testing General rules for thermoelastic stress measurement methods |
|||
GB/T 1927.11-2022 无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain |
|||
GB/T 1927.14-2022 无疵小试样木材物理力学性质试验方法 第14部分:顺纹抗拉强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain |
|||
GB/T 41558-2022 毛丛长度强度试验方法(中英文版) Method of test for tuft length strength |
|||
GB/T 41511-2022 涂附磨具剥离强度测试方法(中英文版) Test method for peel strength of coated abrasives |
|||
GB/T 1927.15-2022 无疵小试样木材物理力学性质试验方法 第15部分:横纹抗拉强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains |
|||
GB/T 1927.16-2022 无疵小试样木材物理力学性质试验方法 第16部分:顺纹抗剪强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain |
|||
GB/T 41650-2022 家具 床 稳定性、强度和耐久性测试方法(中英文版) Furniture beds - Test methods for stability, strength and durability |
|||
GB/T 1457-2022 夹层结构滚筒剥离强度试验方法(中英文版) Test method for drum peel strength of sandwich structures |
|||
GB/T 41498-2022 纤维增强塑料复合材料 用剪切框测定面内剪切应力/剪切应变响应和剪切模量的试验方法(中英文版) Test method for in-plane shear stress / shear strain response and shear modulus using shear frames for fiber reinforced plastic composites |
|||
GB/T 3903.32-2022 鞋类 内底试验方法 缝合撕破力(中英文版) Footwear - Test methods for insoles - Seam tear strength |
|||
GB/T 3903.29-2022 鞋类 外底试验方法 剖层撕裂强度和层间剥离强度(中英文版) Footwear - Test methods for outsoles - Split tear strength and interlaminar peel strength |
|||
GB/T 3903.8-2022 鞋类 内底试验方法 层间剥离强度(中英文版) Footwear - Test methods for insoles - Peel strength between layers |
|||
GB/T 21396-2022 鞋类 成鞋试验方法 帮底粘合强度(中英文版) Footwear - Test methods for finished shoes - Adhesive strength of upper and sole |
|||
GB/T 41852-2022 半导体器件 微机电器件 MEMS结构黏结强度的弯曲和剪切试验方法(中英文版) Semiconductor devices; microelectromechanical devices; bending and shearing test methods for bonding strength of MEMS structures |
|||
GB/T 6328-2021 胶粘剂剪切冲击强度试验方法(中英文版) Test method for shear impact strength of adhesive bonds |
|||
GB/T 3074.1-2021 炭素材料抗折强度测定方法(中英文版) The test method for flexural strength of carbon materials |
|||
GB/T 15972.31-2021 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength |
|||
GB/T 40388-2021 碳/碳复合材料剪切强度试验方法(中英文版) Test method for shear strength of C/C composites |
|||
GB/T 14230-2021 齿轮弯曲疲劳强度试验方法(中英文版) Test method of tooth bending strength for gear load capacity |
|||
GB/T 14229-2021 齿轮接触疲劳强度试验方法(中英文版) Test method of surface contact strength for gear load capacity |
|||
GB/T 40072-2021 潜水器金属框架强度试验方法(中英文版) Strength test method for submersible metallic framework |
|||
GB/T 39814-2021 超薄玻璃抗冲击强度试验方法 落球冲击法(中英文版) Test method for impact strength of ultrathin glass—Ball drop method |
|||
GB/T 1927.9-2021 无疵小试样木材物理力学性质试验方法 第9部分:抗弯强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength |
|||
GB/T 41055-2021 预应力钢筒混凝土管无损检测(远场涡流电磁法)技术要求(中英文版) Technical requirements for nondestructive testing (electromagnetic method based on remote field eddy current) on prestressed concrete cylinder pipe |
|||
GB/T 1927.12-2021 无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain |
|||
GB/T 1927.17-2021 无疵小试样木材物理力学性质试验方法 第17部分:冲击韧性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength |
|||
GB/T 1927.20-2021 无疵小试样木材物理力学性质试验方法 第20部分:抗劈力测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength |
|||
GB/T 41170.2-2021 造口辅助器具的皮肤保护用品 试验方法 第2部分:耐湿完整性和黏合强度(中英文版) Skin barrier for ostomy aids -- Test methods -- Part 2: Wet integrity and adhesive strength |
|||
GB/T 3903.14-2021 鞋类 外底试验方法 针撕破强度(中英文版) Footwear—Test methods for outsoles—Needle tear strength |
|||
GB/T 3903.12-2021 鞋类 外底试验方法 撕裂强度(中英文版) Footwear—Test methods for outsoles—Tear strength |
|||
GB/T 3903.9-2021 鞋类 内底试验方法 跟部持钉力(中英文版) Footwear—Test methods for insoles—Heel pin holding strength |
|||
GB/T 39520-2020 弹簧残余应力的X射线衍射测试方法(中英文版) Test method for determination the residual stress of spring by X-ray diffraction |
|||
GB/T 39152-2020 铜及铜合金弯曲应力松弛试验方法(中英文版) Test method of the bending stress relaxation for copper and copper alloy |
|||
GB/T 38952-2020 无损检测 残余应力超声体波检测方法(中英文版) Non-destructive testing—Testing method for measuring residual stress using bulk wave |
|||
GB/T 38898-2020 无损检测 涂层结合强度超声检测方法(中英文版) Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave |
|||
GB/T 38611-2020 办公家具 办公工作椅 稳定性、强度和耐久性测试方法(中英文版) Office furniture—Office work chairs—Test methods for the determination of stability, strength and durability |
|||
GB/T 38607-2020 办公家具 桌台类 稳定性、强度和耐久性测试方法(中英文版) Office furniture—Tables and desks—Test methods for the determination of stability, strength and durability |
|||
GB/T 9966.7-2020 天然石材试验方法 第7部分:石材挂件组合单元挂装强度试验(中英文版) Test methods for natural stone--Part 7: Determination of strength for individual stone anchorages |
|||
GB/T 9966.1-2020 天然石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验(中英文版) Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength |
|||
GB/T 9966.2-2020 天然石材试验方法 第2部分:干燥、水饱和、冻融循环后弯曲强度试验(中英文版) Test methods for natural stone--Part 2: Determination of dry, wet and after freezing flexural strength |
|||
GB/T 39686-2020 陶瓷厚涂层的弹性模量与强度试验方法(中英文版) Test method for determining elastic modulus and strength of thick ceramic coatings |
|||
GB/T 39685-2020 陶瓷覆层结合强度试验方法(中英文版) Test method for determining bonding strength of ceramic coatings |
|||
GB/T 13217.1-2020 油墨颜色和着色力检验方法(中英文版) Test method for colour and tinctorial strength of ink |
|||
GB/T 39487-2020 发泡结构胶粘剂管剪强度试验方法(中英文版) Test method of tube shear strength for structural foaming adhesives |
|||
GB/T 39163-2020 靶材与背板结合强度测试方法(中英文版) Test methods of the bonding strength for target-backing plate assemblies |
|||
GB/T 25217.11-2019 冲击地压测定、监测与防治方法 第11部分:煤层卸压爆破防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 11: Prevention method of destress blasting in coal seam |
|||
GB/T 1431-2019 炭素材料耐压强度测定方法(中英文版) The test method for compressive strength of carbon materials |
|||
GB/T 8721-2019 炭素材料抗拉强度测定方法(中英文版) The test method for tensile strength of carbon materials |
|||
GB/T 21839-2019 预应力混凝土用钢材试验方法(中英文版) Test methods of steel for prestressing concrete |
|||
GB/T 37617-2019 纳滤膜表面Zeta电位测试方法 流动电位法(中英文版) Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement |
|||
GB/T 38440-2019 铸铁楔压强度试验方法(中英文版) Test method for penetration strength of cast iron |
|||
GB/T 25217.10-2019 冲击地压测定、监测与防治方法 第10部分:煤层钻孔卸压防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 10: Prevention method of drillhole destressing on coal-seam |
|||
GB/T 25217.7-2019 冲击地压测定、监测与防治方法 第7部分:采动应力监测方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 7: Monitoring method of mining-induced stress |
|||
GB/T 37781-2019 玻璃材料弯曲强度试验方法(中英文版) Test methods for bending strength of glass |
|||
GB/T 1431-2019 炭素材料耐压强度测定方法(中英文版) The test method for compressive strength of carbon materials |
|||
GB/T 3903.43-2019 鞋类 帮面、衬里和内垫试验方法 缝合强度(中英文版) Footwear—Test methods for uppers,lining and insocks—Seam strength |
|||
GB/T 36405-2018 平板玻璃应力检测方法(中英文版) Test method for stress in flat glass |
|||
GB/T 36264-2018 超高温氧化环境下纤维复合材料拉伸强度试验方法(中英文版) Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment |
|||
GB/T 36509-2018 滑翔伞结构强度要求及测试方法(中英文版) Requirements and testing methods of structure strength for paraglider |
|||
GB/T 1452-2018 夹层结构平拉强度试验方法(中英文版) Test method for flatwise tension strength of sandwich constructions |
|||
GB/T 17737.308-2018 同轴通信电缆 第1-308部分:机械试验方法 铜包金属的抗拉强度和延伸率试验(中英文版) Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals |
|||
GB/T 34520.7-2017 连续碳化硅纤维测试方法 第7部分:高温强度保留率(中英文版) Test methods for continuous silicon carbide fiber—Part 7 :High temperature strength retention rate |
|||
GB/T 34254-2017 日用陶瓷把手、装饰材料牢固度测试方法(中英文版) Test method for handle strength and decoration resistance to chemical corrosion of domestic ceramic wares |
|||
GB/T 34228-2017 耐热浸胶帆布 高温粘合性能试验方法(中英文版) Dipped heat-resistant canvas―Test method for adhesion strength at high temperature |
|||
GB/T 33883-2017 7XXX系铝合金应力腐蚀试验 沸腾氯化钠溶液法(中英文版) Test methods for stress corrosion of 7XXX series aluminium alloys—Boiling sodium chloride solution method |
|||
GB/T 33835-2017 摩擦材料冲击强度试验方法(中英文版) Test method of impact strength for friction material |
|||
GB/T 35160.3-2017 合成石材试验方法 第3部分:压缩强度的测定(中英文版) Test methods for agglomerated stone—Part 3:Determination of compressive strength |
|||
GB/T 35160.2-2017 合成石材试验方法 第2部分:弯曲强度的测定(中英文版) Test methods for agglomerated stone—Part 2:Determination of flexural strength |
|||
GB/T 35465.2-2017 聚合物基复合材料疲劳性能测试方法 第2部分:线性或线性化应力寿命(S-N)和应变寿命(ε-N)疲劳数据的统计分析(中英文版) Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data |
|||
GB/T 22638.7-2016 铝箔试验方法 第7部分:热封强度的测定(中英文版) Test methods for aluminium and aluminium alloy foils-Part 7:Determination of heat seal strength |
|||
GB/T 1408.3-2016 绝缘材料 电气强度试验方法 第3部分:1.2/50μs冲击试验补充要求(中英文版) Insulating materials—Test methods for electric strength—Part 3: Additional requirements for 1.2/50 μs impulse tests |
|||
GB/T 33210-2016 无损检测 残余应力的电磁检测方法(中英文版) Non-destructive testing—Test method for determining residual stresses by electromagnetic technology |
|||
GB/T 1408.1-2016 绝缘材料 电气强度试验方法 第1部分:工频下试验(中英文版) Insulating materials—Test methods for electric strength—Part 1: Test at power frequencies |
|||
GB/T 1408.2-2016 绝缘材料 电气强度试验方法 第2部分:对应用直流电压试验的附加要求(中英文版) Insulating materials—Test methods for electric strength—Part 2: Additional requirements for tests using direct voltage |
|||
GB/T 33332-2016 胶粘带动态剪切强度的试验方法(中英文版) Test method for dynamic shear strength of adhesive tapes |
|||
GB/T 33334-2016 胶粘剂单搭接拉伸剪切强度试验方法(复合材料对复合材料)(中英文版) Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite) |
|||
GB/T 32788.4-2016 预浸料性能试验方法 第4部分:拉伸强度的测定(中英文版) Test method for properties of prepreg—Part 4: Determination of tensile strength |
|||
GB/T 21956.3-2015 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第3部分:后置式静态试验方法(中英文版) Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3:Static testing method of rear mounted ROPS |
|||
GB/T 21956.2-2015 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第2部分:前置式动态试验方法(中英文版) Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2:Dynamic testing method of front mounted ROPS |
|||
GB/T 21956.1-2015 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第1部分:前置式静态试验方法(中英文版) Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1:Static testing method of front mounted ROPS |
|||
GB/T 32073-2015 无损检测 残余应力超声临界折射纵波检测方法(中英文版) Non-destructive testing—Test method for measuring residual stress using ultrasonic critical refracted longitudinal wave |
|||
GB/T 31967.2-2015 稀土永磁材料物理性能测试方法 第2部分:抗弯强度和断裂韧度的测定(中英文版) Test method for physical property of rare earth permanent magnetic materials—Part 2:Determination of bending strength and fracture toughness |
|||
GB/T 11413-2015 皮鞋后跟结合力试验方法(中英文版) Test method for bond strength of leather shoes heels |
|||
GB/T 18147.5-2015 大麻纤维试验方法 第5部分:断裂强度试验方法(中英文版) Test method for hemp fiber—Part 5: Test method for breaking strength of hemp fiber |
|||
GB/T 31494-2015 数字电视场强测试仪技术要求和测量方法(中英文版) Technical requirements and test methods for field strength meter of digital television |
|||
GB/T 31541-2015 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法(中英文版) Test method for interfacial bond strength of fine ceramic materials—Cross-bonded |
|||
GB/T 31334.1-2015 浸胶帆布试验方法 第1部分:粘合强度(中英文版) Test methods for dipped canvas—Part 1: Adhesion strength |
|||
GB/T 24218.18-2014 纺织品 非织造布试验方法 第18部分:断裂强力和断裂伸长率的测定(抓样法)(中英文版) Textiles―Test methods for nonwovens―Part 18: Determination of breaking strength and elongation (grab method) |
|||
GB/T 31093-2014 蓝宝石晶锭应力测试方法(中英文版) Test method for stress of monocrystalline sapphire ingot |
|||
GB/T 30969-2014 聚合物基复合材料短梁剪切强度试验方法(中英文版) Test method for short-beam shear strength of polymer matrix composite materials |
|||
GB/T 30968.4-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分:开孔压缩强度试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength |
|||
GB/T 30968.3-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分:开孔拉伸强度试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength |
|||
GB/T 30202.3-2013 脱硫脱硝用煤质颗粒活性炭试验方法 第3部分:耐磨强度、耐压强度(中英文版) Test method for granular activated carbon from coal for desulfurization and denitration process―Part3: Abrasive resistance and compression strength |
|||
GB 17578-2013 客车上部结构强度要求及试验方法(中英文版) Requirements and test methods of strength for the superstructure of bus |
|||
GB/T 29417-2012 水泥砂浆和混凝土干燥收缩开裂性能试验方法(中英文版) Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete |
|||
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
|||
GB/T 27749-2011 绝缘漆耐热性试验规程 电气强度法(中英文版) Test procedure for thermal endurance of insulating varnishes - Electric strength method |
|||
GB/T 27723-2011 皮鞋跟面扭转强度试验方法(中英文版) Test method for torsional strength of top piece attachment |
|||
GB/T 26739-2011 道路车辆 制动衬片 材料内剪切强度试验方法(中英文版) Road vehicles - Brake linings - Test method for internal shear strength of lining material |
|||
GB/T 24218.3-2010 纺织品 非织造布试验方法 第3部分:断裂强力和断裂伸长率的测定(条样法)(中英文版) Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation (Strip method) |
|||
GB/T 26140-2010 无损检测 测量残余应力的中子衍射方法(中英文版) Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction |
|||
GB/T 25996-2010 绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法(中英文版) Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel |
|||
GB/T 24518-2009 金属和合金的腐蚀 应力腐蚀室外暴露试验方法(中英文版) Corrosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments |
|||
GB/T 24277-2009 评估部分型式试验成套设备(PTTA)短路耐受强度的一种方法(中英文版) A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) |
|||
GB/T 23805-2009 精细陶瓷室温拉伸强度试验方法(中英文版) Fine ceramics(advanced ceramics,advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
|||
GB/T 11837-2009 混凝土管用混凝土抗压强度试验方法(中英文版) Test methods of the concrete compressive strength of concrete pipes for water |
|||
GB/T 11037-2009 船用锅炉及压力容器强度和密性试验方法(中英文版) Test method for strength and tightness of marine boiler and pressure vessel |
|||
GB/T 21956.4-2009 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分:后置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS |
|||
GB/T 18029.8-2008 轮椅车 第8部分:静态强度,冲击强度及疲劳强度的要求和测试方法(中英文版) Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths |
|||
GB/T 13217.6-2008 液体油墨着色力检验方法(中英文版) Test method for relative tinting strength of liquid ink |
|||
GB/T 14624.2-2008 胶印油墨着色力检验方法(中英文版) Test method for colour strength of offset ink |
|||
GB/T 3903.43-2008 鞋类 帮面、衬里和内垫试验方法 缝合强度(中英文版) Footwear - Test methods for uppers, lining and insocks - Seam strength |
|||
GB/T 3903.29-2008 鞋类 外底试验方法 剖层撕裂力和层间剥离强度(中英文版) Footwear - Test methods for outsoles - Split tear strength and delamination resistance |
|||
GB/T 22640-2008 铝合金加工产品的环形试样应力腐蚀试验方法(中英文版) Test method of C-Ring sample to stress-corrosion cracking for wrought aluminium and aluminium alloys products |
|||
GB/T 22638.7-2008 铝箔试验方法 第7部分:热封强度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength |
|||
GB/T 18144-2008 玻璃应力测试方法(中英文版) Test method for measurement of stress in glass |
|||
GB/T 14390-2008 精细陶瓷高温弯曲强度试验方法(中英文版) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature |
|||
GB/T 4925-2008 渔网 合成纤维网片强力与断裂伸长率试验方法(中英文版) Fishing nets - Method of test for the determination of strength and breaking elongation of netting of synthetic fiber |
|||
GB/T 22307-2008 密封垫片高温抗压强度试验方法(中英文版) Standard test method for compressive strength of gaskets at elevated temperatures |
|||
GB/T 11387-2008 压电陶瓷材料性能测试方法 静态弯曲强度的测试(中英文版) Test methods for the properties of piezoelectric ceramics - Test for the static flexural strength |
|||
GB/T 1842-2008 塑料 聚乙烯环境应力开裂试验方法(中英文版) Plastics - Test method for environmental stress-cracking of polyethylene |
|||
GB/T 7121.2-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分:后置式动态试验方法(中英文版) The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method |
|||
GB/T 2951.42-2008 电缆和光缆绝缘和护套材料通用试验方法 第42部分:聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi |
|||
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
|||
GB/T 3903.23-2008 鞋类 鞋跟和跟面试验方法 跟面结合力(中英文版) Footwear - Test methods for heels and top pieces - Top piece retention strength |
|||
GB/T 3903.22-2008 鞋类 外底试验方法 抗张强度和伸长率(中英文版) Footwear - Test methods for outsoles - Tensile strength and elongation |
|||
GB/T 3903.21-2008 鞋类 粘扣带试验方法 反复开合前后的剪切强度(中英文版) Footwear - Test methods for accessories:Touch and close fasteners - Shear strength before and after repeated closing |
|||
GB/T 3903.20-2008 鞋类 粘扣带试验方法 反复开合前后的剥离强度(中英文版) Footwear - Test methods for accessories:Touch and close fasteners - Peel strength before and after repeated closing |
|||
GB/T 3903.24-2008 鞋类 鞋跟试验方法 持钉力(中英文版) Footwear - Test methods for heels - Heel pin holding strength |
|||
GB/T 7121.1-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法(中英文版) The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS |
|||
GB/T 21956.3-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS |
|||
GB/T 21956.2-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS |
|||
GB/T 21956.1-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS |
|||
GB/T 21921-2008 不透性石墨材料抗拉强度试验方法(中英文版) Test method for tensile strength of impermeable graphite materials |
|||
GB/T 21839-2008 预应力混凝土用钢材试验方法(中英文版) Steel for prestressed concrete - Test methods |
|||
GB/T 12621-2008 管法兰用垫片应力松弛试验方法(中英文版) Standard test method for stress relaxation of gaskets for pipe flanges |
|||
GB/T 11363-2008 钎焊接头强度试验方法(中英文版) Test method of the strength for brazed and soldered joint |
|||
GB/T 21601-2008 危险品 包装提梁提环强度试验方法(中英文版) Dangerous goods - Test method for bale handle and drop handle strength of packaging |
|||
GB/T 21568-2008 危险品 包装拉断力试验方法(中英文版) Dangerous goods - Test method for tensile break stress of packaging |
|||
GB/T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版) Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
找到:189條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |