中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 4214.11-2021 家用和类似用途电器噪声测试方法 电动食品加工器具的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for electrically-operated food preparation appliances |
![]() |
|
![]() |
GB/T 38787-2020 塑料 材料生物分解试验用样品制备方法(中英文版) Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials |
![]() |
|
![]() |
GB/T 13448-2019 彩色涂层钢板及钢带试验方法(中英文版) Test methods for prepainted steel sheet and strip |
![]() |
|
![]() |
GB/T 33689-2017 选煤试验方法一般规定(中英文版) General rules for testing methods of coal preparation |
![]() |
|
![]() |
GB/T 32788.1-2016 预浸料性能试验方法 第1部分:凝胶时间的测定(中英文版) Test method for properties of prepreg—Part 1: Determination of gel time |
![]() |
|
![]() |
GB/T 32788.2-2016 预浸料性能试验方法 第2部分:树脂流动度的测定(中英文版) Test method for properties of prepreg—Part 2: Determination for resin flow of prepreg |
![]() |
|
![]() |
GB/T 32788.6-2016 预浸料性能试验方法 第6部分:单位面积质量的测定(中英文版) Test method for properties of prepreg—Part 6: Determination of mass per unit area |
![]() |
|
![]() |
GB/T 32788.4-2016 预浸料性能试验方法 第4部分:拉伸强度的测定(中英文版) Test method for properties of prepreg—Part 4: Determination of tensile strength |
![]() |
|
![]() |
GB/T 32788.3-2016 预浸料性能试验方法 第3部分:挥发物含量的测定(中英文版) Test method for properties of prepreg—Part 3: Determination of volatile content |
![]() |
|
![]() |
GB/T 32788.5-2016 预浸料性能试验方法 第5部分:树脂含量的测定(中英文版) Test method for properties of prepreg—Part 5: Determination of resin content |
![]() |
|
![]() |
GB/T 25774.2-2016 焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验(中英文版) Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel |
![]() |
|
![]() |
GB/T 27797.4-2013 纤维增强塑料 试验板制备方法 第4部分:预浸料模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 4:Moulding of prepregs |
![]() |
|
![]() |
GB/T 18570.6-2011 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法(中英文版) Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method |
![]() |
|
![]() |
GB/T 26919-2011 选煤厂 煤泥水自然沉降试验方法(中英文版) Coal preparation plant - Methods for the natural falling testing of slurry |
![]() |
|
![]() |
GB/T 26918-2011 选煤厂 煤的转筒泥化试验方法(中英文版) Coal preparation plant - Test methods for degradation in water of raw coal feed in drum |
![]() |
|
![]() |
GB/T 25774.3-2010 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验(中英文版) Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint |
![]() |
|
![]() |
GB/T 25774.1-2010 焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验(中英文版) Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys |
![]() |
|
![]() |
GB/T 25151.4-2010 尿素高压设备制造检验方法 第4部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取(中英文版) Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
![]() |
|
![]() |
GB/T 24326-2009 纸浆 物理试验用实验室纸页的制备 快速凯塞法(中英文版) Pulps - Preparation of laboratory sheets for physical testing - Rapid-Kothen method |
![]() |
|
![]() |
GB/T 24324-2009 纸浆 物理试验用实验室纸页的制备 常规纸页成型器法(中英文版) Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method |
![]() |
|
![]() |
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
![]() |
|
![]() |
GB/T 14625.4-2008 篮球、足球、排球、手球试验方法 第4部分:试验条件与试样准备(中英文版) Test methods for basketball, football, volleyball and handball - Part 4: Test conditions and sample preparation |
![]() |
|
![]() |
GB/T 16613-2008 塑料 试验用聚氯乙烯(PVC)糊的制备 分散器法(中英文版) Plastics - Preparation of PVC pastes for test purposes - Dissolver method |
![]() |
|
![]() |
GB/T 21991-2008 塑料 试验用聚氯乙烯(PVC)糊的制备 行星混合器法(中英文版) Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method |
![]() |
|
![]() |
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
![]() |
|
![]() |
GB/T 2941-2006 橡胶物理试验方法试样制备和调节通用程序(中英文版) Rubber - General procedures for preparing and conditioning test pieces for physical test methods |
![]() |
|
![]() |
GB/T 13448-2006 彩色涂层钢板及钢带试验方法(中英文版) Test methods for Prepainted Steel Sheet |
![]() |
|
![]() |
GB/T 18570.3-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) |
![]() |
|
![]() |
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
![]() |
|
![]() |
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
![]() |
|
![]() |
GB/T 18570.8-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture |
![]() |
|
![]() |
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
![]() |
|
![]() |
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
![]() |
|
![]() |
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
![]() |
|
![]() |
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
![]() |
|
![]() |
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
![]() |
|
![]() |
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
![]() |
|
![]() |
GB/T 19816.1-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling |
![]() |
|
![]() |
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
![]() |
|
![]() |
GB/T 6058-2005 纤维缠绕压力容器制备和内压试验方法(中英文版) Test method for preparation and internal pressure testing of filament-wound pressure vessels |
![]() |
|
![]() |
GB/T 6609.23-2004 氧化铝化学分析方法和物理性能测定方法 试样的制备和贮存(中英文版) Chemical analysis methods and determination of physical performance of alumina--Preparation andstorage of test samples |
![]() |
|
![]() |
GB/T 603-2002 化学试剂 试验方法中所用制剂及制品的制备(中英文版) Chemical reagent--Preparations of reagent solutions for use in test methods |
![]() |
|
![]() |
GB/T 18711-2002 选煤用磁铁矿粉试验方法(中英文版) Magnetite for use in coal preparation--Test methods |
![]() |
|
![]() |
GB/T 17849-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法(中英文版) Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives |
![]() |
|
![]() |
GB/T 6730.1-1986 铁矿石化学分析方法 分析用预干燥试样的制备(中英文版) Methods for chemical analysis of iron ores--Preparation of predried test samples for chemical analysis |
![]() |
找到:45條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |