中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 47774-2026
印染设备能耗评定技术规范(中英文版)
Technical Specifications for the Energy Consumption Assessment of Textile Printing and Dyeing Equipment
 
GB/T 47765-2026
压力管道站场设备完整性管理规范(中英文版)
Specifications for Integrity Management of Equipment at Pressure Pipeline Stations and Yards
 
GB/T 47748-2026
起重机械 钢结构焊接技术规范(中英文版)
Technical Specifications for Welding of Steel Structures in Lifting Equipment
 
GB/T 26205-2026
制冷空调设备和系统 减少卤代制冷剂排放规范(中英文版)
Refrigeration and Air Conditioning Equipment and Systems: Specifications for Reducing Emissions of Halogenated Refrigerants
 
GB/T 47566-2026
冶金装备网络化协同制造 客户需求数据描述规范(中英文版)
Networked Collaborative Manufacturing of Metallurgical Equipment: Specifications for Describing Customer Demand Data
 
GB/T 21980-2026
专业运动服装和防护用品通用技术规范(中英文版)
General Technical Specifications for Professional Sports Apparel and Protective Equipment
 
GB/T 47464-2026
城市道路交通信息监测和显示设备设置规范(中英文版)
Specifications for the Installation of Urban Road Traffic Information Monitoring and Display Equipment
 
GB/Z 6113.405-2026
无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分:不确定度、统计学和限值建模 替换试验方法的使用条件(中英文版)
Specifications for Radio Disturbance and Immunity Measurement Equipment and Methods—Parts 4–5: Uncertainty, Statistics, and Limit Modeling; Conditions for the Use of Substitute Test Methods
 
GB/T 12668.2-2025
调速电气传动系统 - 第2部分:一般要求 - 交流调速电气传动系统额定值的规定(中英文版)
Speed-Regulating Electrical Drive Systems - Part 2: General Requirements - Specifications for Ratings of AC Speed-Regulating Electrical Drive Systems
 
GB/T 46689-2025
城市轨道交通信号系统车载设备人机界面显示规范(中英文版)
Display Specifications for Human-Machine Interface of On-Board Equipment in Urban Rail Transit Signaling Systems
 
GB/T 16702.8-2025
压水堆核电厂核岛机械设备设计规范-第8部分:低压或常压储罐(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 8: Low-Pressure or Atmospheric-Pressure Tanks
 
GB/T 16702.7-2025
压水堆核电厂核岛机械设备设计规范-第7部分:设备支承(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 7: Equipment Supports
 
GB/T 16702.6-2025
压水堆核电厂核岛机械设备设计规范-第6部分:堆内构件(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 6: Reactor Internals
 
GB/T 16702.5-2025
压水堆核电厂核岛机械设备设计规范-第5部分:小型设备(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 5: Small Equipment
 
GB/T 16702.4-2025
压水堆核电厂核岛机械设备设计规范-第4部分:3级设备(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 4: Level 3 Equipment
 
GB/T 16702.3-2025
压水堆核电厂核岛机械设备设计规范-第3部分:2级设备(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 3: Level 2 Equipment
 
GB/T 16702.2-2025
压水堆核电厂核岛机械设备设计规范-第2部分:1级设备(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 2: Level 1 Equipment
 
GB/T 16702.1-2025
压水堆核电厂核岛机械设备设计规范-第1部分:总则(中英文版)
Design Specifications for Mechanical Equipment of Nuclear Island of Pressurized Water Reactor Nuclear Power Plants - Part 1: General
 
GB/T 29244-2024
网络安全技术-办公设备安全规范(中英文版)
Network security technology - Office equipment security specifications
 
GB/T 42558.2-2024
高原用换流站电气设备抗震技术-第2部分:抗震设计规范(中英文版)
Seismic technology for electrical equipment of converter stations for plateau use - Part 2: Seismic design specifications
 
GB 39800.5-2023
个体防护装备配备规范 第5部分:建材(中英文版)
Specifications for the Equipment of Personal Protective Equipment Part 5: Building Materials
 
GB/T 8586-2023
探鱼仪工作频率分配及其防止声波干扰技术规范(中英文版)
Operating frequency allocation of fish finders and technical specifications for preventing acoustic interference
 
GB/T 42468.3-2023
纸质档案抢救与修复规范 第3部分:修复质量要求(中英文版)
Specifications for Rescue and Restoration of Paper Archives Part 3: Restoration Quality Requirements
 
GB/T 6113.402-2022
无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分:不确定度、统计学和限值建模 测量设备和设施的不确定度(中英文版)
Specifications for radio disturbance and immunity measuring equipment and methods of measurement - Part 4-2: Uncertainty, statistics and limit value modeling Uncertainties of measuring equipment and facilities
 
GB/T 18779.1-2022
产品几何技术规范(GPS) 工件与测量设备的测量检验 第1部分:按规范验证合格或不合格的判定规则(中英文版)
Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1: Rules for Passing or Failing Verification According to Specifications
 
GB/T 40097-2021
能源路由器功能规范和技术要求(中英文版)
Functional specifications and technical requirements of energy router
 
GB/T 39752-2021
电动汽车供电设备安全要求及试验规范(中英文版)
Safety requirements and test specifications of electric vehicle conductive supply equipment
 
GB/T 41149-2021
基础地理信息数据质量要求与评定(中英文版)
Specifications for quality requirements and evaluation of fundamental geographic information data
 
GB 39800.4-2020
个体防护装备配备规范 第4部分:非煤矿山(中英文版)
Specifications for the provision of personal protective equipment—Part 4:Non-coal mines
 
GB 39800.3-2020
个体防护装备配备规范 第3部分:冶金、有色(中英文版)
Specifications for the provision of personal protective equipment—Part 3:Metallurgy,nonferrous metals
 
GB/T 18779.6-2020
产品几何技术规范(GPS) 工件与测量设备的测量检验 第6部分:仪器和工件接受/拒收的通用判定规则(中英文版)
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
 
GB/T 18779.5-2020
产品几何技术规范(GPS) 工件与测量设备的测量检验 第5部分:指示式测量仪器的检验不确定度(中英文版)
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
 
GB/T 18779.4-2020
产品几何技术规范(GPS) 工件与测量设备的测量检验 第4部分:判定规则中功能限与规范限的基础(中英文版)
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules
 
GB/T 38368-2019
产品几何技术规范(GPS) 基于数字化模型的测量通用要求(中英文版)
Geometrical product specifications (GPS)—Requirements of digital model-based measurement
 
GB/T 37987-2019
机动车电子标识读写设备应用接口规范(中英文版)
Specifications for application interface of read-write equipment for the electronic identification of motor vehicles
 
GB/T 37536-2019
机动车检验机构检测设备期间核查规范(中英文版)
Intermediate check specifications of measuring equipment for vehicle inspection body
 
GB/T 37026-2018
服装商品编码与射频识别(RFID)标签规范(中英文版)
Encoding rules and specifications of radio frequency identification(RFID) labels for clothing commodities
 
GB/T 34798-2017
核酸数据库序列格式规范(中英文版)
Formats specifications of nucleotide sequence database
 
GB/T 34807-2017
岩土工程仪器设备的检验测试通用技术规范(中英文版)
General technical specifications for inspection and test of geotechnical engineering instruments & equipment
 
GB/T 34838-2017
电鸣乐器教学系统配备及安装通用技术规范(中英文版)
General technical specifications of equipment and installation for electronic musical instruments teaching system
 
GB/T 34636-2017
饲料加工设备交叉污染防控技术规范(中英文版)
Cross contamination prevention and control specifications of feed processing equipment
 
GB/T 34657.1-2017
电动汽车传导充电互操作性测试规范 第1部分:供电设备(中英文版)
Interoperability test specifications of electric vehicle conductive charging—Part 1: Supply equipment
 
GB/T 34080.1-2017
基于云计算的电子政务公共平台安全规范 第1部分:总体要求(中英文版)
Security specifications of electronic government common platform based on cloud computing—Part 1: General requirements
 
GB/T 35745-2017
柔性直流输电控制与保护设备技术要求(中英文版)
Specifications for control and protection equipment of voltage source converter based high-voltage direct current (VSC-HVDC) transmission system
 
GB/T 18168-2017
水上游乐设施通用技术条件(中英文版)
Specifications of water amusement equipment category
 
GB/T 33355-2016
保健按摩器具安全使用规范(中英文版)
Specifications for healthcare massage equipment safety of usage
 
GB/T 32666.3-2016
高档与普及型机床数控系统 第3部分:交流伺服驱动装置的要求及验收规范(中英文版)
High grade and popular numerical control systems of machine tool—Part 3: Requirements and verification specifications for A.C. servo device
 
GB/T 32666.2-2016
高档与普及型机床数控系统 第2部分:主轴驱动装置的要求及验收规范(中英文版)
High grade and popular numerical control system of machine tool—Part 2: Requirements and verification specifications for spindle drive device
 
GB/T 32666.1-2016
高档与普及型机床数控系统 第1部分: 数控装置的要求及验收规范(中英文版)
High-grade and popular numerical control system of machine tool—Part 1: Requirements and verification specifications for numerical control device
 
GB/T 1592.1-2016
农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分:通用要求、安全要求、防护罩尺寸和空隙范围(中英文版)
Agricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications,safety requirements,dimensions for master shield and clearance zone
 
GB/T 31140-2014
高原用风力发电设备环境技术要求(中英文版)
Environment specifications of wind-power generation equipments for plateau
 
GB/T 30731-2014
煤炭联合制样系统技术条件(中英文版)
Specifications of combined equipment for coal sample preparation
 
GB/T 30730-2014
煤炭机械化采样系统技术条件(中英文版)
Specifications of mechanical sampling equipment for coal
 
GB/T 11322.1-2013
射频电缆 第0部分:详细规范设计指南 第1篇 同轴电缆(中英文版)
Radio frequency cables―Part 0: Guide to the design of detail specifications―Section 1―Coaxial cables
 
GB/T 10067.32-2013
电热装置基本技术条件 第32部分:电压型变频多台中频无心感应炉成套装置(中英文版)
Basic specifications for electroheat installations - Part 32: A set of medium frequency coreless induction furnaces with a voltage type frequency converter
 
GB/T 28567-2012
电线电缆专用设备技术要求(中英文版)
Specifications for electric wire and cable of special equipment
 
GB/Z 25843-2010
±800kV特高压直流输电控制与保护设备技术导则(中英文版)
Specifications for control and protection equipment of ±800kV ultra high voltage direct current transmission
 
GB/T 25146-2010
工业设备化学清洗质量验收规范(中英文版)
Quality acceptance specifications of chemical cleaning for industrial equipment
 
GB/T 24344-2009
工业机械电气设备 耐压试验规范(中英文版)
Electrical equipment of industrial machines - High-voltage test specifications
 
GB/T 24343-2009
工业机械电气设备 绝缘电阻试验规范(中英文版)
Electrical equipment of industrial machines - Insulation resistance test specifications
 
GB/T 24342-2009
工业机械电气设备 保护接地电路连续性试验规范(中英文版)
Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications
 
GB/T 24112-2009
工业机械电气设备 静电放电抗扰度试验规范(中英文版)
Electrical equipment of industrial machines - Electrostatic discharge immunity test specifications
 
GB/T 24111-2009
工业机械电气设备 电快速瞬变脉冲群抗扰度试验规范(中英文版)
Electrical equipment of industrial machines - Electrical fast transient/burst immunity test specifications
 
GB/T 23685-2009
废电器电子产品回收利用通用技术要求(中英文版)
General technical specifications of recovering for waste electrical and electronic equipment
 
GB/T 18779.3-2009
产品几何技术规范(GPS) 工件与测量设备的测量检验 第3部分:关于对测量不确定度的表述达成共识的指南(中英文版)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
 
GB/T 22841-2008
工业机械电气设备 电压暂降和短时中断抗扰度试验规范(中英文版)
Electrical equipment of industrial machines - Test specifications for voltage dips, short interruptions immunity
 
GB/T 22840-2008
工业机械电气设备 浪涌抗扰度试验规范(中英文版)
Electrical equipment of industrial machines - Test specifications for surge immunity
 
GB/T 18168-2008
水上游乐设施通用技术条件(中英文版)
Specifications of water amusement equipment category
 
GB/T 1592.1-2008
农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分:通用要求、安全要求、防护罩尺寸和空隙范围(中英文版)
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
 
GB/T 18779.2-2004
产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南(中英文版)
Geometrical Product Specifications(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification
 
GB/T 10072-2003
照相用电子闪光装置技术条件(中英文版)
Specifications of electronic flash equipments for photograph
 
GB/T 18779.1-2002
产品几何量技术规范(GPS) 工件与测量设备的测量检验 第1部分:按规范检验合格或不合格的判定规则(中英文版)
Geometrical product specifications (GPS)--Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications
 
GB/T 17562.1-1998
频率低于3 MHz的矩形连接器 第1部分 总规范 一般要求和编制有质量评定要求的连接器详细规范的导则(中英文版)
Rectangular connectors for frequencies below 3 MHz--Part 1: Generic specification--General requirements and guide for the preparation of detail specifications for connectors with assessed quality
 
GB/T 15157-1994
印制板用频率低于3 MHz的连接器 第1 部分:总规范 一般要求和编制有质量评定的详细规范的导则(中英文版)
Connectors for frequencies below 3MHz for use with printed boards--Part l:Generic specification--Gen-eral requirements and guide for the preparation of detail specifications, with assessedquality
 
GB/T 14236-1993
电视中心视频系统和脉冲系统设备技术要求(中英文版)
Specifications of equipement for video and pulse system of TV centre
 
GB/T 12742-1991
自行车检测设备和器具技术条件(中英文版)
The specifications of testing equipment and measuring appliance for bicycle
 
GB/T 11632-1989
潜水器和水下装置耐压结构材料技术条件(中英文版)
Technical specifications of material of pressure hull structure for submersibles and underwater equipments
 
GB/T 11631-1989
潜水器和水下装置耐压结构制造技术条件(中英文版)
Technical specifications of manufacture of pressure hull structure for submersibles and underwater equipments
 
GB/T 7436-1987
在模拟电话电路上开放电报及低速数据的时分复用设备技术要求(中英文版)
Specifications of TDM equipment operating on an analog telephone-type circuit for telegraph and lower-speed data
 
GB/T 5442-1985
电话自动交换网带内单频脉冲线路信号技术指标测试方法(中英文版)
The test methods for the technical specifications of inband pulsing single frequency line signalling system for automatic telephone switching network
 
GB/T 3971.3-1983
电话自动交换网多频记发器信号技术指标测试方法(中英文版)
The test methods for the technical specifications of multi-frequency register signalling for telephone auto-matic switching network
 
GB/T 3873-1983
通信设备产品包装通用技术条件(中英文版)
General specifications for products packaging of communication equipments
 

找到:82條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1