中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
SN/T 5499-2023 矿产品中滑石含量的测定 X射线衍射全谱拟合法(中英文版) Determination of Talc Content in Mineral Products X-ray Diffraction Full Spectrum Fitting Method |
|||
GB/T 25851.2-2023 流动式起重机 起重机性能的试验测定 第2部分:静载荷作用下的结构能力(中英文版) Mobile cranes - Test determination of crane performance - Part 2: Structural capacity under static loads |
|||
GB/T 43251-2023 纳米技术 小尺寸纳米结构薄膜拉伸性能测定方法(中英文版) Nanotechnology - Determination of tensile properties of small-sized nanostructured films |
|||
YB/T 6045-2022 炭素材料显微结构测定方法(中英文版) Method for Determination of Microstructure of Carbon Materials |
|||
GB/T 1040.2-2022 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件(中英文版) Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics |
|||
GB/T 3488.4-2022 硬质合金 显微组织的金相测定 第4部分:孔隙度、非化合碳缺陷和脱碳相的金相测定(中英文版) Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases |
|||
GB/T 41758.2-2022 塑料 聚酮(PK)模塑和挤出材料 第2部分:试样制备和性能测定(中英文版) Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
|||
GB/T 1845.2-2021 塑料 聚乙烯(PE)模塑和挤出材料 第2部分:试样制备和性能测定(中英文版) Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties |
|||
GB/T 40067-2021 碳化钨粉末微观组织及缺陷检测方法(中英文版) Microstructure and defect determination of tungsten carbide powder |
|||
QB/T 5593-2021 挤塑聚苯乙烯泡沫塑料中残留发泡剂的测定(中英文版) Determination of residual blowing agent in extruded polystyrene foam |
|||
GB/T 3488.3-2021 硬质合金 显微组织的金相测定 第3部分:Ti(C,N)和WC立方碳化物基硬质合金显微组织的金相测定(中英文版) Hardmetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals |
|||
GB/T 40830-2021 猪饲料真可消化氨基酸测定技术规程(简单T型瘘管法)(中英文版) Code of practice for the determination of feed true ileal digestible amino acids for pigs (Simple T-cannulation) |
|||
GB/T 22271.2-2021 塑料 聚甲醛(POM)模塑和挤出材料 第2部分:试样制备和性能测定(中英文版) Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
|||
GB/T 40722.2-2021 苯乙烯-丁二烯橡胶(SBR)? 溶液聚合SBR微观结构的测定? 第2部分:红外光谱ATR 法(中英文版) Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method |
|||
GB/T 40815.2-2021 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第2部分:强迫风冷的确定方法(中英文版) Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2:Method for the determination of forced air cooling |
|||
GB/T 9966.3-2020 天然石材试验方法 第3部分:吸水率、体积密度、真密度、真气孔率试验(中英文版) Test methods for natural stone--Part 3: Determination of water absorption, bulk density, true density and true porosity |
|||
NY/T 3678-2020 土壤田间持水量的测定 围框淹灌仪器法(中英文版) Determination of Soil Field Water Capacity-Bounding Frame Submerged Irrigation Instrument Method |
|||
HG/T 5764-2020 石油炼制催化剂孔结构的测定(中英文版) Determination of Pore Structure of Petroleum Refining Catalysts |
|||
SH/T 1832-2020 异戊二烯橡胶微观结构的测定 核磁共振氢谱法(中英文版) Determination of the microstructure of isoprene rubber by proton nuclear magnetic resonance spectroscopy |
|||
GB/T 1632.4-2020 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分:聚碳酸酯(PC)模塑和挤出材料(中英文版) Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials |
找到:128條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |