中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
 |
GB/T 14055.3-2026 中子参考辐射 第3部分：场所剂量仪和个人剂量计的校准及其能量和角响应的确定（中英文版） Neutron Reference Radiation—Part 3: Calibration of Environmental Dosimeters and Personal Dosimeters, and Determination of Their Energy and Angular Responses |
 |
|
|
|
GB/T 47386-2026 肥料中芸苔素内酯的测定 高效液相色谱法（中英文版） Determination of Brassinosteroids in Fertilizers: High-Performance Liquid Chromatography Method |
|
|
|
|
GB/T 33061.12-2025 塑料 - 动态力学性能的测定 - 第12部分：非共振压缩振动法（中英文版） Plastics - Determination of dynamic mechanical properties - Part 12: Non-resonant compression vibration method |
|
|
|
|
GB/T 33061.3-2025 塑料 - 动态力学性能的测定 - 第3部分：弯曲振动下共振曲线法（中英文版） Plastics - Determination of dynamic mechanical properties - Part 3: Resonance curve method under bending vibration |
|
|
|
|
GB/T 46832-2025 塑料 - 磨料磨损性能的测定 - 往复线性滑动法（中英文版） Plastics - Determination of Abrasive Wear Properties - Reciprocating Linear Sliding Method |
|
|
|
|
GB/T 33061.10-2025 塑料 - 动态力学性能的测定 - 第10部分：使用平行平板振动流变仪测定复数剪切黏度（中英文版） Plastics - Determination of Dynamic Mechanical Properties - Part 10: Determination of Complex Shear Viscosity Using a Parallel Plate Vibrating Rheometer |
|
|
|
|
GB/T 41424.2-2025 皮革 - 沾污性能的测定 - 第2部分：马丁代尔摩擦法?（中英文版） Leather - Determination of soiling resistance - Part 2: Martindale abrasion method |
|
|
|
|
GB/T 12162.3-2025 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 - 第3部分：场所剂量仪和个人剂量计的校准及其能量响应和角响应的测定（中英文版） Reference radiation for calibrating dosimeters and dose rate meters and determining their energy response - Part 3: Calibration of area dosimeters and personal dosimeters and determination of their energy response and angular response |
|
|
|
|
GB/T 12162.2-2025 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 - 第2部分：辐射防护用的能量范围为8 - keV~1.3 - MeV - 和 - 4 - MeV~9 - MeV的剂量测定（中英文版） Reference X-rays and γ-rays for calibration of dosimeters and dose rate meters and for determination of their energy response - Part 2: Dosimetry for radiation protection in the energy ranges 8 keV to 1.3 MeV and 4 MeV to 9 MeV |
|
|
|
|
GB/T 12162.1-2025 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 - 第1部分：辐射特性及产生方法（中英文版） X-ray and Gamma-ray Reference Radiation for Calibration of Dosimeters and Dosimeters and Determination of Their Energy Response - Part 1: Radiation Characteristics and Generation Methods |
|
|
|
|
GB/T 2481.1-2025 固结磨具用磨料-粒度组成的检测和标记-第1部分：粗磨粒F4～F220（中英文版） Abrasives for Bonded Abrasives - Determination and Marking of Particle Size Composition - Part 1: Coarse Abrasive F4 F220 |
|
|
|
|
GB/T 11349.2-2025 机械振动与冲击-机械导纳的试验确定-第2部分：用激振器作单点平动激励测量（中英文版） Mechanical Vibration and Shock - Experimental Determination of Mechanical Admittance - Part 2: Single-Point Translational Excitation Measurement Using a Vibrator |
|
|
|
|
GB/T 45593-2025 精细陶瓷-微磨损试验测定涂层的耐磨性（中英文版） Fine Ceramics - Micro-Abrasion Tests for Determination of Wear Resistance of Coatings |
|
|
|
|
GB/T 21196.2-2025 纺织品-马丁代尔法织物耐磨性的测定-第2部分：试样破损的测定（中英文版） Textiles - Determination of Fabric Abrasion Resistance by the Martindale Method - Part 2: Determination of Specimen Breakage |
|
|
|
|
GB/T 45133-2025 气体分析-混合气体组成的测定-基于单点和两点校准的比较法（中英文版） Gas Analysis - Determination of Mixed Gas Composition - Comparative Methods Based on Single-Point and Two-Point Calibrations |
|
|
|
|
GB/T 44244-2024 质子交换膜燃料电池汽车用氢气-一氧化碳、二氧化碳的测定-气相色谱法（中英文版） Hydrogen for proton exchange membrane fuel cell vehicles - determination of carbon monoxide and carbon dioxide - gas chromatography |
|
|
|
|
GB/T 44242-2024 质子交换膜燃料电池汽车用氢气-无机卤化物、甲酸的测定-离子色谱法（中英文版） Hydrogen for proton exchange membrane fuel cell vehicles - determination of inorganic halides and formic acid - ion chromatography |
|
|
|
|
GB/T 44238-2024 质子交换膜燃料电池汽车用氢气-氦、氩、氮和烃类的测定-气相色谱法（中英文版） Hydrogen for proton exchange membrane fuel cell vehicles - determination of helium, argon, nitrogen and hydrocarbons - gas chromatography |
|
|
|
|
GB/T 44243-2024 质子交换膜燃料电池汽车用氢气-含硫化合物、甲醛和有机卤化物的测定-气相色谱法（中英文版） Hydrogen for Proton Exchange Membrane Fuel Cell Vehicles - Determination of Sulfur Compounds, Formaldehyde and Organic Halides - Gas Chromatography |
|
|
|
|
GB/T 43818.1-2024 皮革-耐磨性能的测定-第1部分：泰伯尔法（中英文版） Leather - Determination of abrasion resistance - Part 1: Taber method |
|
|
|
|
GB/T 43722.1-2024 皮革-抗菌性能的测定-第1部分：膜接触法（中英文版） Leather-Determination of antibacterial properties-Part 1: Membrane contact method |
|
|
|
|
GB/T 23538-2023 普通磨料 球磨韧性测定方法（中英文版） Ordinary abrasives - Determination method of ball milling toughness |
|
|
|
|
GB/T 42659-2023 表面化学分析 扫描探针显微术 采用扫描探针显微镜测定几何量：测量系统校准（中英文版） Surface chemical analysis Scanning probe microscopy Determination of geometric quantities using scanning probe microscopy: Calibration of measurement systems |
|
|
|
|
GB/T 33061.7-2023 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法（中英文版） Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method |
|
|
|
|
GB/T 33061.6-2023 塑料 动态力学性能的测定 第6部分：非共振剪切振动法（中英文版） Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method |
|
|
|
|
GB/T 33061.5-2023 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法（中英文版） Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method |
|
|
|
|
GB/T 33061.4-2023 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法（中英文版） Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method |
|
|
|
|
GB/T 14321-2022 刚玉磨料中α-Al2O3相X射线定量测定方法（中英文版） X-ray Quantitative Determination Method of α-Al2O3 Phase in Corundum Abrasive |
|
|
|
|
GB/T 42122-2022 硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法）（中英文版） Vulcanized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method) |
|
|
|
|
GB/T 41894.3-2022 船舶与海上技术 通过测量轴变形量确定船舶推进系统轴功率 第3部分：弹性振动法（中英文版） Ships and Offshore Technology Determination of Shaft Power in Ship Propulsion Systems by Measuring Shaft Deformation Part 3: Elastic Vibration Method |
|
|
|
|
GB/T 30314-2021 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法（中英文版） Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader |
|
|
|
|
GB/T 26703-2021 皮鞋跟面耐磨性能试验方法（中英文版） Determination of abrasion resistance for top piece of leather shoes |
|
|
|
|
GB/T 39693.9-2021 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证（中英文版） Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers |
|
|
|
|
GB/T 40797-2021 硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法（中英文版） Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method |
|
|
|
|
GB/T 39507-2020 皮革 物理和机械试验 耐磨性能的测定：马丁代尔球盘法（中英文版） Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method |
|
|
|
|
GB/T 38949-2020 多孔膜孔径的测定 标准粒子法（中英文版） Determination of pore size for porous membranes—Standard particle method |
|
|
|
|
GB/T 38902-2020 中空纤维膜丝截面结构尺寸的测定 图像分析法（中英文版） Determination of hollow fiber membrane cross-section dimensions—Image analysis method |
|
|
|
|
GB/T 2481.2-2020 固结磨具用磨料 粒度组成的检测和标记 第2部分：微粉（中英文版） Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits |
|
|
|
|
GB/T 9966.4-2020 天然石材试验方法 第4部分：耐磨性试验（中英文版） Test methods for natural stone--Part 4: Determination of abrasion resistance |
|
|
|
|
GB/T 39696-2020 精细陶瓷粉末流动性测定 标准漏斗法（中英文版） Determination of flowability of fine ceramic powders—Calibrated funnel |
|
|
|
|
GB/T 39484-2020 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性（中英文版） Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach |
|
|
|
|
GB/T 36214.2-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法（中英文版） Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method |
|
|
|
|
GB/T 11349.1-2018 机械振动与冲击 机械导纳的试验确定 第1部分：基本术语与定义、传感器特性（中英文版） Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1: Basic terms and definitions, and transducer specifications |
|
|
|
|
GB/T 33260.3-2018 检出能力 第3部分：无校准数据情形响应变量临界值的确定方法（中英文版） Capability of detection—Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
|
|
|
|
GB/T 22159.5-2017 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分：弹性支撑件低频平动动刚度的驱动点测量方法（中英文版） Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
|
|
|
|
GB/T 34186-2017 耐火材料 高温动态杨氏模量试验方法(脉冲激振法)（中英文版） Refractory products—Determination of dynamic Young’s modulus(MOE)at elevated temperatures by impulse excitation of vibration |
|
|
|
|
GB/T 33893-2017 分离膜中全氟辛烷磺酰基化合物（PFOS）和全氟辛酸（PFOA）的测定 液相色谱-串联质谱法（中英文版） Determination of perfluorooctane sulfonates(PFOS) and perfluorooctanoic acid(PFOA) for separation membranes—Liquid chromatography-tandem mass spectrometry method |
|
|
|
|
GB/T 9258.3-2017 涂附磨具用磨料 粒度分析 第3部分：微粉P240～P2500粒度组成的测定（中英文版） Coated abrasives—Grain size analysis—Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
|
|
|
|
GB/T 35160.4-2017 合成石材试验方法 第4部分：耐磨性的测定（中英文版） Test methods for agglomerated stone—Part 4：Determination of abrasion resistance |
|
|
|
|
GB/T 3810.7-2016 陶瓷砖试验方法 第7部分：有釉砖表面耐磨性的测定（中英文版） Test methods of ceramic tiles—Part 7: Determination of resistance to surface abrasion for glazed tiles |
|
|
|
|
GB/T 3810.6-2016 陶瓷砖试验方法 第6部分：无釉砖耐磨深度的测定（中英文版） Test methods of ceramic tiles—Part 6: Determination of resistance to deep abrasion for unglazed tiles |
|
|
|
|
GB/T 4854.9-2016 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件（中英文版） Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels |
|
|
|
|
GB/T 1689-2014 硫化橡胶 耐磨性能的测定（用阿克隆磨耗试验机）（中英文版） Rubber vulcanized―Determination of abrasion resistance (Akron machine) |
|
|
|
|
GB/T 31195-2014 高氯高氨废水 化学需氧量的测定 氯离子校正法（中英文版） High chloride high ammonia wastewater―Determination of chemical oxygen demand―Chloride ion calibration method |
|
|
|
|
GB/T 30758-2014 耐火材料 动态杨氏模量试验方法（脉冲激振法）（中英文版） Refractory products―Determination of dynamic Young’s modulus(MOE) by impulse excitation of vibration |
|
|
|
|
GB/T 30314-2013 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法（中英文版） Rubber-or plastis-coated fabrics—Determination of abrasion resistance—Taber abrader |
|
|
|
|
GB/T 12164.3-2013 β参考辐射 第3部分：场所和个人剂量仪的校准及其能量响应和角响应的确定（中英文版） Reference beta radiations - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence |
|
|
|
|
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p |
|
|
|
|
GB/T 22159.2-2012 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分：弹性支撑件平动动刚度的直接测量方法（中英文版） Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
|
|
|
|
GB/T 18301-2012 耐火材料 常温耐磨性试验方法（中英文版） Refractory products - Determination of resistance to abrasion at ambient temperature |
|
|
|
|
GB/T 19089-2012 橡胶或塑料涂覆织物 耐磨性的测定 马丁代尔法（中英文版） Rubber-or plastics-coated fabrics - Determination of abrasion resistance - Martindale method |
|
|
|
|
GB/T 27628-2011 粮油检验 小麦粉粉色、麸星的测定（中英文版） Inspection of grain and oils - Determination of color and bran speck in wheat flour |
|
|
|
|
GB/T 26703-2011 皮鞋跟面耐磨性能试验方法 旋转辊筒式磨耗机法（中英文版） Determination of abrasion resistance for top piece of leather shoes -Rotation cylindrical drum method |
|
|
|
|
GB/T 1482-2010 金属粉末 流动性的测定 标准漏斗法（霍尔流速计）（中英文版） Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) |
|
|
|
|
GB/T 24531-2009 高炉和直接还原用铁矿石 转鼓和耐磨指数的测定（中英文版） Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices |
|
|
|
|
GB/T 24241-2009 直接还原铁 热压铁块转鼓和耐磨指数的测定（中英文版） Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron(HBI) |
|
|
|
|
GB/T 23988-2009 涂料耐磨性测定 落砂法（中英文版） Determination for abrasion resistance of - Coatings by falling abrasive |
|
|
|
|
GB/T 2481.2-2009 固结磨具用磨料 粒度组成的检测和标记 第2部分：微粉（中英文版） Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits |
|
|
|
|
GB/T 20316.1-2009 普通磨料 堆积密度的测定 第1部分：粗磨粒（中英文版） Abrasive grains - Determination of bulk density - Part 1: Macrogrits |
|
|
|
|
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|
|
|
|
GB/T 18029.3-2008 轮椅车 第3部分：制动器的测定（中英文版） Wheelchairs - Part 3: Determination of effectiveness of brakes |
|
|
|
|
GB/T 22159.3-2008 声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分：弹性支撑件平动动刚度的间接测量方法（中英文版） Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
|
|
|
|
GB/T 13475-2008 绝热 稳态传热性质的测定 标定和防护热箱法（中英文版） Thermal insulation - Determination of steady-state thermal transmission Properties - Calibrated and guard hot box |
|
|
|
|
GB/T 14248-2008 收获机械 制动性能测定方法（中英文版） Determination of braking performance for harvesting machinery |
|
|
|
|
GB/T 9258.2-2008 涂附磨具用磨料 粒度分析 第2部分：粗磨粒P12～P220粒度组成的测定（中英文版） Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
|
|
|
|
GB/T 9867-2008 硫化橡胶或热塑性橡胶耐磨性能的测定（旋转辊筒式磨耗机法）（中英文版） Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device |
|
|
|
|
GB/T 10119-2008 黄铜耐脱锌腐蚀性能的测定（中英文版） Determination of dezincification corrosion resistance of brass |
|
|
|
|
GB/T 12721-2007 橡胶软管 外覆层耐磨耗性能的测定（中英文版） Rubber hoses - Determination of abrasion resistance of the outer cover |
|
|
|
|
GB/T 21196.4-2007 纺织品 马丁代尔法织物耐磨性的测定 第4部分：外观变化的评定（中英文版） Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change |
|
|
|
|
GB/T 21196.3-2007 纺织品 马丁代尔法织物耐磨性的测定 第3部分：质量损失的测定（中英文版） Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss |
|
|
|
|
GB/T 21196.2-2007 纺织品 马丁代尔法织物耐磨性的测定 第2部分：试样破损的测定（中英文版） Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown |
|
|
|
|
GB/T 21196.1-2007 纺织品 马丁代尔法织物耐磨性的测定 第1部分:马丁代尔耐磨试验仪（中英文版） Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus |
|
|
|
|
GB/T 1768-2006 色漆和清漆 耐磨性的测定 旋转橡胶砂轮法（中英文版） Paints and varnishes - Determination of resistance to abrasion - Rotating abrasive rubber wheel method |
|
|
|
|
GB/T 15458-2006 煤的磨损指数测定方法（中英文版） Determination of abrasion index of coal |
|
|
|
|
GB/T 11349.3-2006 振动与冲击 机械导纳的试验确定 第3部分：冲击激励法（中英文版） Vibration and shock - Experimental determination of mechanical mobility - Part 3: Measurement using impact excitation |
|
|
|
|
GB/T 20316.2-2006 普通磨料 堆积密度的测定 第2部分：微粉（中英文版） Abrasive grains - Determination of bulk density - Part 2: Microgrits |
|
|
|
|
GB/T 11349.2-2006 振动与冲击 机械导纳的试验确定 第2部分：用激振器作单点平动激励测量（中英文版） Vibration and shock - Experimental determination of mechanical mobility - Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
|
|
|
|
GB/T 11349.1-2006 振动与冲击 机械导纳的试验确定 第1部分：基本定义与传感器（中英文版） Vibration and shock - Experimental determination of mechanical mobility - Part 1: Basic definitions and transducers |
|
|
|
|
GB/T 3871.6-2006 农业拖拉机 试验规程 第6部分：农林车辆制动性能的确定（中英文版） Agricultural tractors - Test procedures - Part 6: Determination of braking performance |
|
|
|
|
GB/T 3810.7-2006 陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定（中英文版） Test methods of ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles |
|
|
|
|
GB/T 3810.6-2006 陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定（中英文版） Test methods of ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles |
|
|
|
|
GB/T 6404.2-2005 齿轮装置的验收规范 第2部分：验收试验中齿轮装置机械振动的测定（中英文版） Acceptance code for gear units-Part2:Determination of mechanical vibrations of gear units during acceptance testing |
|
|
|
|
GB/T 20026-2005 橡胶和塑料软管 内衬层耐磨性测定（中英文版） Rubber and plastics hose -- Determination of abrasion of lining |
|
|
|
|
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|
|
|
|
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|
|
|
|
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|
|
|
|
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|
|
|
|
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|
|
|
|
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|
|
|
|
GB/T 4129-2003 声学 用于声功率级测定的标准声源的性能与校准要求（中英文版） Acoustics--Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
|
| 找到:106條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |
