中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
 |
GB/T 43809-2024 植物提取物类饲料添加剂特征图谱制定技术要求（中英文版） Technical requirements for the preparation of characteristic profiles of plant extract feed additives |
 |
|
|
|
GB/T 20320-2023 风能发电系统 风力发电机组电气特性测量和评估方法（中英文版） Wind power generation systems - Methods for measuring and evaluating electrical characteristics of wind turbines |
|
|
|
|
GB/T 42680-2023 基于相位多普勒技术的液体燃料雾化特性测试方法（中英文版） Test method for atomization characteristics of liquid fuel based on phase Doppler technique |
|
|
|
|
GB/T 43501-2023 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则（中英文版） Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships with specific characteristics |
|
|
|
|
GB/T 40853.2-2023 高频感性元件 电特性及其测量方法 第2部分：DC-DC变换器用电感器额定电流（中英文版） High frequency inductive components Electrical characteristics and measurement methods Part 2: Rated current of inductors for DC-DC converters |
|
|
|
|
GB/T 43248-2023 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法（中英文版） Electric and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz |
|
|
|
|
GB/T 7164-2022 用于核反应堆的辐射探测器特性及测试方法（中英文版） Characteristics and test methods of radiation detectors for nuclear reactors |
|
|
|
|
GB/T 41342-2022 潮流能发电装置功率特性现场测试方法（中英文版） Field test method for power characteristics of tidal current power generation device |
|
|
|
|
GB/T 33523.604-2022 产品几何技术规范（GPS） 表面结构 区域法 第604部分：非接触（相干扫描干涉）式仪器的标称特性（中英文版） Product Geometry Specification (GPS) Surface Structure Area Method Part 604: Nominal Characteristics of Non-Contact (Coherent Scanning Interferometry) Type Instruments |
|
|
|
|
GB/T 13477.22-2022 建筑密封材料试验方法 第22部分：固化特性的测定（中英文版） Test methods for building sealing materials - Part 22: Determination of curing characteristics |
|
|
|
|
GB/T 33523.602-2022 产品几何技术规范（GPS） 表面结构 区域法 第602部分：非接触（共聚焦色差探针）式仪器的标称特性（中英文版） Product Geometry Specification (GPS) Surface Structure Area Method Part 602: Nominal Characteristics of Non-Contact (Confocal Chromatic Probe) Type Instruments |
|
|
|
|
GB/T 42266-2022 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估（中英文版） Flexible porous polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame |
|
|
|
|
GB/T 33523.606-2022 产品几何技术规范（GPS） 表面结构 区域法 第606部分：非接触（变焦）式仪器的标称特性（中英文版） Geometric Product Specification (GPS) Surface Structure Area Method Part 606: Nominal Characteristics of Non-Contact (Zoom) Type Instruments |
|
|
|
|
GB/T 19466.5-2022 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定（中英文版） Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion |
|
|
|
|
GB/T 33523.605-2022 产品几何技术规范（GPS） 表面结构 区域法 第605部分：非接触（点自动对焦探针）式仪器的标称特性（中英文版） Product Geometric Specifications (GPS) Surface Structure Area Method Part 605: Nominal Characteristics of Non-Contact (Point AF Probe) Type Instruments |
|
|
|
|
GB/Z 42004-2022 确定电气设备（每相额定电流小于或等于75A）骚扰特性用的参考阻抗和公用供电网络阻抗的考虑（中英文版） Consideration of the reference impedance and public power supply network impedance used to determine the disturbance characteristics of electrical equipment (rated current per phase less than or equal to 75A) |
|
|
|
|
GB 14023-2022 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法（中英文版） Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for protection of off-vehicle receivers |
|
|
|
|
GB/T 41770-2022 基于背光成像技术的液体燃料喷射特性测试方法（中英文版） Test method of liquid fuel injection characteristics based on backlight imaging technology |
|
|
|
|
GB/T 10715-2021 带传动 多楔带、联组V带及包括宽V带、六角带在内的单根V带 抗静电带的导电性:要求和试验方法（中英文版） Belt drives—V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts—Electrical conductivity of antistatic belts: Characteristics and methods of test |
|
|
|
|
GB/T 20081.3-2021 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法（中英文版） Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
|
|
|
|
GB/T 40291-2021 核仪器仪表 辐射探测器用高纯度锗晶体 基本特性的测量方法（中英文版） Nuclear instrumentation—High-purity germanium crystals for radiation detectors—Measurement methods of basic characteristics |
|
|
|
|
GB/T 15972.30-2021 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验（中英文版） Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test |
|
|
|
|
GB/T 39938-2021 室内电取暖 地暖 性能特征 定义、测试方法、尺寸和公式符号（中英文版） Electric room heating—Underfloor heating—Performance characteristics—Definitions, method of testing, sizing and formula symbols |
|
|
|
|
GB/T 17743-2021 电气照明和类似设备的无线电骚扰特性的限值和测量方法（中英文版） Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
|
|
|
|
GB/T 41232.2-2021 纳米制造 关键控制特性 纳米储能 第2部分：纳米正极材料的密度测试（中英文版） Nanomanufacturing -- Key control characteristics -- Nano-enabled electrical energy storage -- Part 2: Density measurement of cathode nanomaterials |
|
|
|
|
GB/T 28504.3-2021 掺稀土光纤 第3部分：双包层铒镱共掺光纤特性（中英文版） Rare earth doped optical fibre—Part 3:Characteristics of double-cladding erbium-ytterbium co-doped optical fibre |
|
|
|
|
GB/T 28504.2-2021 掺稀土光纤 第2部分：双包层掺铥光纤特性（中英文版） Rare earth doped optical fibre—Part 2:Characteristics of double-cladding thulium-doped optical fibre |
|
|
|
|
GB/T 40726-2021 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定（中英文版） Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles |
|
|
|
|
GB/T 19789-2021 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法（中英文版） Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor |
|
|
|
|
GB/T 8763-2020 非蒸散型吸气材料及制品吸气性能测试方法（中英文版） Test methods for gas absorption characteristic of non-evaporation gettering materials and products |
|
|
|
|
GB/T 38842-2020 实用超导线的分类和检测方法 一般特性和指南（中英文版） Categories and test methods of practical superconducting wires—General characteristics and guidance |
|
|
|
|
GB/T 14513.3-2020 气动 使用可压缩流体元件的流量特性测定 第 3 部分：系统稳态流量特性的计算方法（中英文版） Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems |
|
|
|
|
GB/T 9771.6-2020 通信用单模光纤 第6部分：宽波长段光传输用非零色散单模光纤特性（中英文版） Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport |
|
|
|
|
GB/T 9771.3-2020 通信用单模光纤 第3部分：波长段扩展的非色散位移单模光纤特性（中英文版） Single-mode optical fibres for telecommunication—Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre |
|
|
|
|
GB/T 9771.2-2020 通信用单模光纤 第2部分：截止波长位移单模光纤特性（中英文版） Single-mode optical fibres for telecommunication—Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre |
|
|
|
|
GB/T 5137.4-2020 汽车安全玻璃试验方法 第4部分：太阳能特性试验（中英文版） Test methods of safety glazing materials used on road vehicles—Part 4:Determination of solar characteristic |
|
|
|
|
GB/T 24635.1-2020 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第1部分：概要和计量特性（中英文版） Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics |
|
|
|
|
GB/T 5169.46-2020 电工电子产品着火危险试验 第46部分：试验火焰 非接触火焰源中起燃时特征热通量的测定（中英文版） Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source |
|
|
|
|
GB/T 39415.1-2020 包装袋 特征性能规范方法 第1部分：纸袋（中英文版） Packaging sacks—Method of specifications for characteristics—Part 1: Paper sacks |
|
|
|
|
GB/T 39422-2020 木结构销槽承压强度及钉连接承载力特征值确定方法（中英文版） Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure |
|
|
|
|
GB/T 39415.2-2020 包装袋 特征性能规范方法 第2部分：热塑性软质薄膜袋（中英文版） Packaging sacks—Method of specifications for characteristics—Part 2: Sacks made from thermoplastic flexible film |
|
|
|
|
GB/T 7253-2019 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性（中英文版） Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type |
|
|
|
|
GB/T 17634-2019 土工布及其有关产品 有效孔径的测定 湿筛法（中英文版） Geotextiles and geotextile-related products—Determination of the characteristic opening size—Wet sieving method |
|
|
|
|
GB/T 7253-2019 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性（中英文版） Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type |
|
|
|
|
GB 4824-2019 工业、科学和医疗设备 射频骚扰特性 限值和测量方法（中英文版） Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement |
|
|
|
|
GB/Z 37627.3-2019 架空电力线路和高压设备的无线电干扰特性 第3部分：减少无线电噪声至最小程度的实施规程（中英文版） Radio interference characteristics of overhead power lines and high-voltage equipment—Part 3:Code of practice for minimizing the generation of radio noise |
|
|
|
|
GB 5920-2019 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能（中英文版） Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers |
|
|
|
|
GB/T 11313.11-2018 射频连接器 第11部分：外导体内径为9.5mm(0.374in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(4.1/9.5型)分规范（中英文版） Radio-frequency connectors—Part 11：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5mm (0.374in) with screw coupling with characteristic impedance 50Ω (type 4.1/9.5) |
|
|
|
|
GB/T 11313.15-2018 射频连接器 第15部分:外导体内径为4.13mm(0.163in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(SMA型)（中英文版） Radio frequency connectors—Part 15: R.F.coaxial connectors with inner diameter of outer conductor 4.13mm(0.163in), characteristic impedance 50 ohms, screw coupling (Type SMA) |
|
|
|
|
GB/T 36532-2018 纤维增强塑料 热固性模塑料和预浸料 固化特性测定（中英文版） Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics |
|
| 找到:207條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |
