中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
 |
GB/T 47973-2026 纤维增强聚合物基复合材料超低温力学性能试验方法（中英文版） Test Methods for the Mechanical Properties of Fiber-Reinforced Polymer-Based Composites at Ultra-Low Temperatures |
 |
|
|
|
GB/T 47896-2026 高矫顽力永磁材料高温磁性能测量方法（中英文版） Methods for Measuring the High-Temperature Magnetic Properties of High-Coercivity Permanent Magnet Materials |
|
|
|
|
GB/T 47593-2026 连续纤维增强陶瓷基复合材料 室温开孔拉伸强度试验方法（中英文版） Test Method for Room-Temperature Open-Holed Tensile Strength of Continuous-Fiber-Reinforced Ceramic Matrix Composites |
|
|
|
|
GB/T 47447-2026 润滑油抗擦伤失效温度的测定 SRV型试验机法（中英文版） Determination of the Scratch Failure Temperature of Lubricating Oils Using the SRV Tester Method |
|
|
|
|
GB/T 47344-2026 永磁体多场耦合耐久性测试方法 高温和反向磁场（中英文版） Test Method for the Endurance of Permanent Magnets Under Multi-Field Coupling: High Temperature and Reverse Magnetic Fields |
|
|
|
|
GB/T 47322-2026 建筑火灾升温条件下电缆耐火性能试验方法（中英文版） Test Method for the Fire Resistance of Cables Under Elevated Temperature Conditions in Building Fires |
|
|
|
|
GB/T 17737.215-2026 同轴通信电缆 第1-215部分：环境试验方法 电缆的高温老化（中英文版） Coaxial Communication Cables—Part 1–215: Environmental Test Methods—High-Temperature Aging of Cables |
|
|
|
|
GB/T 47108-2026 耐火材料 常温圆柱劈裂抗拉强度试验方法（中英文版） Refractory Materials—Test Method for Tensile Strength of Cylindrical Splits at Room Temperature |
|
|
|
|
GB/T 47009-2026 稀土永磁材料高温反向磁场耐久试验方法（中英文版） Test Method for High-Temperature Reverse Magnetic Field Endurance Testing of Rare-Earth Permanent Magnet Materials |
|
|
|
|
GB/T 16429-2026 粉尘云最低着火温度测定方法（中英文版） Method for Determining the Minimum Ignition Temperature of a Dust Cloud |
|
|
|
|
GB/T 24276-2025 通过计算进行低压成套开关设备和控制设备温升验证的一种方法（中英文版） A Method for Verifying Temperature Rise of Low-Voltage Switchgear and Control Equipment Through Calculation |
|
|
|
|
GB/T 6495.5-2025 光伏器件 - 第5部分：用开路电压法确定光伏器件的等效电池温度（ECT）（中英文版） Photovoltaic Devices - Part 5: Determining the Equivalent Cell Temperature (ECT) of Photovoltaic Devices Using the Open-Circuit Voltage Method |
|
|
|
|
GB/T 31405-2025 管道防腐层高温阴极剥离试验方法（中英文版） Test Method for High-Temperature Cathodic Delamination of Pipeline Anti-Corrosion Coatings |
|
|
|
|
GB/T 46444-2025 碳纤维增强陶瓷基复合材料高温拉-拉疲劳性能试验方法（中英文版） Test Method for High-Temperature Tensile-Tensile Fatigue Properties of Carbon Fiber Reinforced Ceramic Matrix Composites |
|
|
|
|
GB/T 46383.301-2025 电气运输设备 - 第3-1部分：不同温度条件下电动滑板车总运行时间的性能测试方法（中英文版） Electrical Transport Equipment - Part 3-1: Performance Test Method for Total Operating Time of Electric Scooters under Different Temperature Conditions |
|
|
|
|
GB/T 46627-2025 管法兰用垫片高温密封性能试验方法（中英文版） Test Method for High-Temperature Sealing Performance of Gaskets for Pipe Flanges |
|
|
|
|
GB/T 11026.8-2025 电气绝缘材料 - 耐热性 - 第8部分：用固定时限法确定绝缘材料的耐热指数（TI和RTI）（中英文版） Electrical Insulating Materials - Heat Resistance - Part 8: Determination of Thermal Index (TI) and Relative Temperature Index (RTI) of Insulating Materials Using Fixed-Time Method |
|
|
|
|
GB/T 46513-2025 锂离子电池正极材料电化学性能测试 - 低温性能测试方法（中英文版） Electrochemical Performance Testing of Lithium-Ion Battery Cathode Materials - Low-Temperature Performance Test Method |
|
|
|
|
GB/T 46307-2025 消费品缺陷工程分析 - 危险温度点测量方法（中英文版） Engineering Analysis of Consumer Product Defects - Measurement Method for Critical Temperature Points |
|
|
|
|
GB/T 34218-2025 耐火材料-高温耐压强度试验方法（中英文版） Test Method for High Temperature Compressive Strength of Refractories |
|
|
|
|
GB/T 46065-2025 连续纤维增强陶瓷基复合材料 - 管材室温轴向拉伸性能试验方法（中英文版） Continuous Fiber Reinforced Ceramic Matrix Composites - Test Method for Axial Tensile Properties of Tubes at Room Temperature |
|
|
|
|
GB/T 46063-2025 连续纤维增强陶瓷基复合材料 - 管材室温环向拉伸性能试验方法（中英文版） Continuous Fiber Reinforced Ceramic Matrix Composites Test Method for Room Temperature Tensile Properties of Tubes |
|
|
|
|
GB/T 6427-2025 压电陶瓷振子频率温度稳定性的测试方法（中英文版） Test Method for Temperature Stability of Frequency in Piezoelectric Ceramic Resonators |
|
|
|
|
GB/T 45982.3-2025 第二代高温超导体微连接-第3部分：接头试验方法（中英文版） Microjoining of Second-Generation High-Temperature Superconductors - Part 3: Joint Test Methods |
|
|
|
|
GB/T 24204-2025 高炉炉料用铁矿石-低温还原粉化率的测定-动态试验法（中英文版） Iron Ore for Blast Furnace Charges - Determination of Pulverization Rate During Low-Temperature Reduction - Dynamic Test Method |
|
|
|
|
GB/T 45763-2025 精细陶瓷-陶瓷薄板室温弯曲强度试验方法-三点弯曲或四点弯曲法（中英文版） Fine Ceramics - Test Method for Room-Temperature Flexural Strength of Ceramic Sheets - Three-Point or Four-Point Bend Method |
|
|
|
|
GB/T 45723-2025 印制电路板测试方法-温度循环状态下镀覆孔单孔电阻的变化（中英文版） Printed Circuit Board Test Methods - Resistance of Plated-Through Holes Under Temperature Cycling Changes |
|
|
|
|
GB/T 6148-2025 精密电阻合金电阻温度系数测试方法（中英文版） Test Methods for Temperature Coefficient of Resistance of Precision Resistance Alloys |
|
|
|
|
GB/T 1634.1-2025 塑料-负荷变形温度的测定-第1部分：通用试验方法（中英文版） Plastics - Determination of deflection temperature under load - Part 1: General test method |
|
|
|
|
GB/T 23595.4-2025 LED用稀土荧光粉试验方法-第4部分：高温高湿性能的测定（中英文版） Test methods for rare earth phosphors for LEDs - Part 4: Determination of high-temperature and high-humidity performance |
|
|
|
|
GB/T 44753-2024 超薄玻璃液相线温度试验方法（中英文版） Test methods for liquidus temperature of ultra-thin glass |
|
|
|
|
GB/T 4074.7-2024 绕组线试验方法-第7部分：测定漆包绕组线温度指数的试验方法（中英文版） Winding wire test method-Part 7: Test method for determining the temperature index of enameled winding wire |
|
|
|
|
GB/T 44549-2024 高温条件下陶瓷材料界面黏结强度试验方法（中英文版） Test method for interfacial bonding strength of ceramic materials under high temperature conditions |
|
|
|
|
GB/T 44341-2024 肥料中总硫含量的测定-高温燃烧法（中英文版） Determination of total sulfur content in fertilizers - High temperature combustion method |
|
|
|
|
GB/T 44304-2024 精细陶瓷室温断裂阻力试验方法-压痕（IF）法（中英文版） Test method for fracture resistance of fine ceramics at room temperature - Indentation (IF) method |
|
|
|
|
GB/T 43853-2024 激光修复层高温摩擦磨损性能试验-球-盘法（中英文版） High-temperature Friction and Wear Performance Test of Laser Repair Layer-Ball-disc Method |
|
|
|
|
GB/T 43870.1-2024 磁性材料居里温度的测量方法-第1部分：永磁材料（中英文版） Measurement method of Curie temperature of magnetic materials - Part 1: permanent magnetic materials |
|
|
|
|
GB/T 43870.2-2024 磁性材料居里温度的测量方法-第2部分：软磁材料（中英文版） Measurement method of Curie temperature of magnetic materials - Part 2: soft magnetic materials |
|
|
|
|
GB/T 43873-2024 超薄玻璃退火上下限温度试验方法（中英文版） Test method for upper and lower limit temperature of ultra-thin glass annealing |
|
|
|
|
GB/T 6803-2023 铁素体钢的无塑性转变温度落锤试验方法（中英文版） Drop weight test method for non-plastic transition temperature of ferritic steels |
|
|
|
|
GB/T 43296-2023 精细陶瓷室温弯曲疲劳性能试验方法（中英文版） Test method for room temperature bending fatigue properties of fine ceramics |
|
|
|
|
GB/T 43255-2023 燃料电池电动汽车低温冷起动性能试验方法（中英文版） Test method for low temperature cold starting performance of fuel cell electric vehicles |
|
|
|
|
GB/T 43118-2023 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法（中英文版） Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances |
|
|
|
|
GB/T 43092-2023 锂离子电池正极材料电化学性能测试 高温性能测试方法（中英文版） Electrochemical performance testing of lithium-ion battery cathode materials High temperature performance testing method |
|
|
|
|
GB/T 3780.30-2023 炭黑 第30部分：高温挥发物的测定 热重法（中英文版） Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method |
|
|
|
|
GB/T 42657-2023 红外光学玻璃红外折射率温度系数测试方法 垂直入射法（中英文版） Test method for infrared refractive index temperature coefficient of infrared optical glass - vertical incidence method |
|
|
|
|
GB/T 42667-2023 精细陶瓷室温等双轴弯曲强度试验方法 双环法（中英文版） Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method |
|
|
|
|
GB/T 42655-2023 连续纤维增强陶瓷基复合材料高温压缩性能试验方法（中英文版） Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites |
|
|
|
|
GB/T 42910-2023 无机胶粘剂高温压缩剪切强度试验方法（中英文版） Test method for high temperature compression shear strength of inorganic adhesives |
|
|
|
|
GB/T 42913-2023 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法（中英文版） Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids |
|
|
|
|
GB/T 42912-2023 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法（中英文版） Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids |
|
|
|
|
GB/T 42919.6-2023 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法（中英文版） Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology |
|
|
|
|
GB/T 42919.3-2023 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法（中英文版） Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method |
|
|
|
|
GB/T 40261.1-2023 热环境的人类工效学 交通工具内热环境评价 第1部分:热应激评估原理与方法和等效温度测定（中英文版） Ergonomics of the thermal environment Assessment of the thermal environment in vehicles Part 1: Principles and methods of heat stress assessment and equivalent temperature determination |
|
|
|
|
GB/T 5989-2023 耐火材料 荷重软化温度试验方法(示差升温法)（中英文版） Refractories - Test method for softening temperature under load (differential heating method) |
|
|
|
|
GB/T 42516-2023 高温形状记忆合金化学分析方法 铂含量的测定 硫脲络合沉淀法（中英文版） Chemical analysis method of high temperature shape memory alloy - determination of platinum content - thiourea complex precipitation method |
|
|
|
|
GB/T 42368-2023 高温高压条件下可燃气体（蒸气）爆炸极限测定方法（中英文版） Method for Determination of Explosive Limits of Combustible Gas (Steam) under High Temperature and High Pressure Conditions |
|
|
|
|
GB/T 41654-2022 金属和合金的腐蚀 在高温腐蚀环境下暴露后试样的金相检验方法（中英文版） Corrosion of metals and alloys - Method for metallographic examination of specimens after exposure to high temperature corrosive environments |
|
|
|
|
GB/T 41490-2022 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法（中英文版） Test method for rolling contact fatigue of silicon nitride ceramics at room temperature ball plate method |
|
|
|
|
GB/T 2406.3-2022 塑料 用氧指数法测定燃烧行为 第3部分：高温试验（中英文版） Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test |
|
|
|
|
GB/T 12085.22-2022 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验（中英文版） Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration |
|
|
|
|
GB/T 41822-2022 核聚变堆高温承压部件的热氦检漏方法（中英文版） Hot helium leak detection method for high temperature pressure-bearing parts of nuclear fusion reactor |
|
|
|
|
GB/T 41641-2022 力学性能测量 REBCO带材室温拉伸试验方法（中英文版） Measurement of mechanical properties - Tensile test method for REBCO strip at room temperature |
|
|
|
|
GB/T 40404-2021 渣类材料 熔化温度的测定 高温金相法（中英文版） Slag material—Measurement of melting temperature—High temperature metallographic method |
|
|
|
|
GB/T 40396-2021 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法（DMA）（中英文版） Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA） |
|
|
|
|
GB/T 40320-2021 铝合金力学熔点测试方法（中英文版） Measuring method for mechanical melting temperature of aluminum alloy |
|
|
|
|
GB/T 1425-2021 贵金属及其合金熔化温度范围的测定 热分析试验方法（中英文版） Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis |
|
|
|
|
GB/T 40286-2021 低温双循环余热回收利用装置性能测试方法（中英文版） The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization |
|
|
|
|
GB/T 31838.7-2021 固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率（中英文版） Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures |
|
|
|
|
GB/T 19216.3-2021 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法（中英文版） Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure |
|
|
|
|
GB/T 19216.2-2021 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法（中英文版） Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not |
|
|
|
|
GB/T 19216.1-2021 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法（中英文版） Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed |
|
|
|
|
GB/T 39828-2021 陶瓷厚涂层的高温弹性模量试验方法（中英文版） Test method for determining elastic modulus of thick ceramic coating at elevated temperature |
|
|
|
|
GB/T 19136-2021 农药热储稳定性测定方法（中英文版） Testing method of the accelerated storage stability at elevated temperature for pesticides |
|
|
|
|
GB/T 228.1-2021 金属材料 拉伸试验 第1部分:室温试验方法（中英文版） Metallic materials—Tensile testing—Part 1: Method of test at room temperature |
|
|
|
|
GB/T 40794-2021 稀土永磁材料高温磁通不可逆损失检测方法（中英文版） Measurement method of irreversible magnetic flux loss due to high temperature of rare earth permanent magnet |
|
|
|
|
GB/T 38948-2020 沥青混合料低温抗裂性能评价方法（中英文版） Evaluation method for the cracking resistance of asphalt mixture at low temperature |
|
|
|
|
GB/T 38912-2020 锆管室温闭端爆破试验方法（中英文版） Test method for closed-end burst of zirconium tubes at room temperature |
|
|
|
|
GB/T 38804-2020 金属材料高温蒸汽氧化试验方法（中英文版） Test method for oxidation of metallic materials exposed in high-temperature steam |
|
|
|
|
GB/T 5137.3-2020 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验（中英文版） Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests |
|
|
|
|
GB/T 38534-2020 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法（中英文版） Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature |
|
|
|
|
GB/T 38515-2020 石英纤维织物增强树脂基复合材料高温力学性能试验方法（中英文版） The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials |
|
|
|
|
GB/T 39682-2020 精细陶瓷 高温和超高温弹性模量的测定 缺口环相对法（中英文版） Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method |
|
|
|
|
GB/T 32065.8-2020 海洋仪器环境试验方法 第8部分：温度变化试验（中英文版） Environmental test methods for oceanographic instruments—Part 8：Change of temperature test |
|
|
|
|
GB/T 38298-2019 固体化学品自动点火温度的试验方法（中英文版） Test method of auto-ignition temperature for solid chemicals |
|
|
|
|
GB/T 38430-2019 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法（中英文版） Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
|
|
|
|
GB/T 38426-2019 睡袋的热阻和使用温度的测定方法（中英文版） Test method for thermal resistance and use temperature of sleeping bags |
|
|
|
|
GB/T 38298-2019 固体化学品自动点火温度的试验方法（中英文版） Test method of auto-ignition temperature for solid chemicals |
|
|
|
|
GB/T 37945-2019 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法（中英文版） Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC) |
|
|
|
|
GB/T 228.3-2019 金属材料 拉伸试验 第3部分：低温试验方法（中英文版） Metallic materials—Tensile testing—Part 3: Method of test at low temperature |
|
|
|
|
GB/T 13477.13-2019 建筑密封材料试验方法 第13部分：冷拉-热压后粘结性的测定（中英文版） Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable temperatures |
|
|
|
|
GB/T 1634.1-2019 塑料 负荷变形温度的测定 第1部分:通用试验方法（中英文版） Plastics—Determination of temperature of deflection under load—Part 1:General test method |
|
|
|
|
GB/T 21451.5-2019 石油和液体石油产品 储罐中液位和温度自动测量法 第5部分：油船舱中的温度测量（中英文版） Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 5: Measurement of temperature in marine vessels |
|
|
|
|
GB/T 21451.2-2019 石油和液体石油产品 储罐中液位和温度自动测量法 第2部分: 油船舱中的液位测量（中英文版） Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels |
|
|
|
|
GB/T 37052-2018 光伏建筑一体化（BIPV）组件电池额定工作温度测试方法（中英文版） Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules |
|
|
|
|
GB/T 13477.12-2018 建筑密封材料试验方法-第12部分：同一温度下拉伸-压缩循环后粘结性的测定（中英文版） Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature |
|
|
|
|
GB/T 36214.4-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法（中英文版） Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method |
|
|
|
|
GB/T 36214.3-2018 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法（中英文版） Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method |
|
|
|
|
GB/T 36264-2018 超高温氧化环境下纤维复合材料拉伸强度试验方法（中英文版） Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment |
|
|
|
|
GB/T 4937.11-2018 半导体器件 机械和气候试验方法 第11部分：快速温度变化 双液槽法（中英文版） Semiconductor devices—Mechanical and climatic test methods—Part 11: Rapid change of temperature—Two-fluid-bath method |
|
| 找到:226條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |
