中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  SJ/T 11312-2005
家庭主网通讯协议规范(中英文版)
Specifications for home backbone-network communication protocol
  SJ/T 11308-2005
电子设备用连接器 第4-101部分:有质量评定的印制板连接器 符合iec 60917的基本网格为2.0mm印制板和背板用两件式组合连接器详细规范(中英文版)
Connectors for electronic equipment. Part4-101:Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2.0 mm for printed boards and backplanes in accordance with IEC 60917
  SJ/T 11313-2005
家庭主网接口一致性测试规范(中英文版)
Specifications for conformance test on the interface for home backbone-network
  GB/T 12612-2005
多功能钢铁表面处理液通用技术条件(中英文版)
General specification for multifunctional solution of iron and steel surface treatment
  HJ/T 176-2005
危险废物集中焚烧处置工程建设技术规范(中英文版)
Technical specifications for centralized incineration facility construction on hazardous waste
  HJ/T 177-2005
医疗废物集中焚烧处置工程建设技术规范(中英文版)
Technical specifications for centralized Incineration facility construction on medical waste
  YD/T 1350.2-2005
波分复用(wdm)系统网络管理接口技术要求 第二部分:通用信息模型部分(中英文版)
Technical specification of Wavelength Division Multiplexing (WDM) system network management interface. Part 2: The generic information model part
  YD/T 1356-2005
交换机综合业务数字网(isdn)基本接入速率“u”接口对用户供电要求(中英文版)
The specification for user power feeding of ISDA basic access U interface on the switch
  JJF 1134-2005
专用工作测力机校准规范(中英文版)
Calibration Specification for Working Force Measuring Machines for Special Purposes
  TB/T 2771-2005
切轨机通用技术条件(中英文版)
General technical specification for rail cutting machine
  TB/T 2355-2005
铁路区间电话通话柱技术要求和试验方法(中英文版)
The specification and test methods of communication column for railway track-side telephone
  TB/T 1855-2005
小型道碴清筛机通用技术条件(中英文版)
General technical specification for little ballast cleaning machine
  GB/T 13150-2005
半导体器件 分立器件 电流大于 100A、环境和管壳额定的双向三极晶闸管空白详细规范(中英文版)
Semiconductor devices Discret devices Blank detail specification for bidirectional triode thyristors(triacs),ambient and case-rated,for currents greater than 100A
  SJ 20920-2005
外弹道测量差分多普勒法电离层折射修正系统通用规范(中英文版)
General specification for the ionospheric refraction correction system for exterior ballistic measurement by differential Doppler
  GB/T 19705-2005
水文仪器信号与接口(中英文版)
General specification of signals and interfaces for hydrologic instruments
  DL/T 846.5-2004
高电压测试设备通用技术条件? 第5部分:六氟化硫微量水分仪(中英文版)
General technical specifications for high voltage test equipments. Part 5: Analyzer for trace moisture in SF6 gas
  DL/T 846.9-2004
高电压测试设备通用技术条件? 第9部分:真空开关真空度测试仪(中英文版)
General technical specifications for high voltage test equipments. Part 9: Vacuum interrupter detector
  SH/T 3064-2003
石油化工钢制通用阀门选用、检验及验收(中英文版)
Specification for selection, inspection and acceptance of steel valves used in petrochemical industry
  HG/T 3075-2003
胶粘剂产品包装、标志、运输和贮存的规定(中英文版)
The specification for package, mark, transportation and storage of adhesive products
  GB/T 16857.5-2004
产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机(中英文版)
Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems

找到:2428條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [86] [87] [88] [89] [90] [91] [92]