中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 30301-2013 高纯试剂试验方法通则(中英文版) General rule for test methods of highly purified reagents |
![]() |
|
![]() |
GB/T 5169.20-2013 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
![]() |
|
![]() |
GB/T 11446.3-2013 电子级水测试方法通则(中英文版) Generic rules for test methods of electronic grade water |
![]() |
|
![]() |
GB/T 30454-2013 LED用稀土硅酸盐荧光粉试验方法(中英文版) Test methods of silicate phosphors activated by rare earths for LED |
![]() |
|
![]() |
GB/T 30457-2013 灯用稀土紫外发射荧光粉试验方法(中英文版) Test methods of rare earth ultraviolet emission phosphors for fluorescent lamps |
![]() |
|
![]() |
GB 30228-2013 运动场地地面冲击衰减的安全性能要求和试验方法(中英文版) Safety requirements and test methods for impact attenuation of playground surfacing |
![]() |
|
![]() |
GB/T 19753-2013 轻型混合动力电动汽车能量消耗量试验方法(中英文版) Test methods for energy consumption of light-duty hybrid electric vehicles |
![]() |
|
![]() |
GB/T 30103.3-2013 冷库热工性能试验方法 第3部分:围护结构热流量检测(中英文版) Methods of testing for thermal performance on cold store―Part 3: Heat flux testing for envelope enclosure |
![]() |
|
![]() |
GB/T 30103.2-2013 冷库热工性能试验方法 第2部分:风速检测(中英文版) Methods of testing for thermal performance on cold store―Part 2: Air velocity testing |
![]() |
|
![]() |
GB/T 30103.1-2013 冷库热工性能试验方法 第1部分:温度和湿度检测(中英文版) Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing |
![]() |
|
![]() |
GB/T 30177.1-2013 过滤机性能测试方法 第1部分:加压过滤机(中英文版) Methods of perfomance testing for filters―Part 1:Press filter |
![]() |
|
![]() |
GB/T 4757-2013 煤粉(泥)实验室单元浮选试验方法(中英文版) Methods for the batch flotation testing of fine coal |
![]() |
|
![]() |
GB/T 27797.4-2013 纤维增强塑料 试验板制备方法 第4部分:预浸料模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 4:Moulding of prepregs |
![]() |
|
![]() |
GB/T 12967.5-2013 铝及铝合金阳极氧化膜检测方法 第5部分:用变形法评定阳极氧化膜的抗破裂性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation |
![]() |
|
![]() |
GB/T 29895-2013 横向振动法测试木质材料动态弯曲弹性模量方法(中英文版) Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration |
![]() |
|
![]() |
GB/T 30001.5-2013 信息技术 基于射频的移动支付 第5部分:射频接口测试方法(中英文版) Information technology - RF-based mobile payment - Part 5: Test methods of radio frequency interface |
![]() |
|
![]() |
GB 17578-2013 客车上部结构强度要求及试验方法(中英文版) Requirements and test methods of strength for the superstructure of bus |
![]() |
|
![]() |
GB/T 29756-2013 干混砂浆物理性能试验方法(中英文版) Test methods of physical property for dry-mix mortar |
![]() |
|
![]() |
GB/T 20629.2-2013 电气用非纤维素纸 第2部分:试验方法(中英文版) Non-cellulosic paper for electrical purposes - Part 2:Methods of test |
![]() |
|
![]() |
GB/T 19264.2-2013 电气用压纸板和薄纸板 第2部分:试验方法(中英文版) Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
![]() |
|
![]() |
GB/T 16903.2-2013 标志用图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility |
![]() |
|
![]() |
GB/T 29627.2-2013 电气用聚芳酰胺纤维纸板 第2部分:试验方法(中英文版) Aramid pressboard for electrical purposes - Part 2: Methods of test |
![]() |
|
![]() |
GB/T 50266-2013 工程岩体试验方法标准(中英文版) Standard for test methods of engineering rock mass |
![]() |
|
![]() |
GB/T 29247-2012 工业自动化仪表通用试验方法(中英文版) General methods for testing the performance of industrial process measurement and control instruments |
![]() |
|
![]() |
GB/T 29459.1-2012 在役承压设备金属材料小冲杆试验方法 第1部分:总则(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 1:General requirements |
![]() |
|
![]() |
GB/T 29125-2012 压缩天然气汽车燃料消耗量试验方法(中英文版) Test methods for fuel consumption of CNG vehicles |
![]() |
|
![]() |
GB/T 28958-2012 乘用车低温性能试验方法(中英文版) Test methods of low temperature performance for passenger car |
![]() |
|
![]() |
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
![]() |
|
![]() |
GB/T 29307-2012 电动汽车用驱动电机系统可靠性试验方法(中英文版) The reliability test methods of drive motor system for electric vehicles |
![]() |
|
![]() |
GB/T 1864-2012 颜料和体质颜料通用试验方法 颜料颜色的比较(中英文版) General methods of test for pigments and extenders - Comparison of colour of pigments |
![]() |
|
![]() |
GB/T 29199-2012 光缆防鼠性能测试方法(中英文版) Test methods for rodent resistance of optical fiber cable |
![]() |
|
![]() |
GB/T 28993-2012 结构用锯材力学性能测试方法(中英文版) Standard test methods for mechanical properties of structural lumber |
![]() |
|
![]() |
GB/T 7196-2012 用液体萃取测定电气绝缘材料离子杂质的试验方法(中英文版) Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids |
![]() |
|
![]() |
GB/T 15344-2012 滑石物理检验方法(中英文版) Methods for physical test of talc |
![]() |
|
![]() |
GB/T 29417-2012 水泥砂浆和混凝土干燥收缩开裂性能试验方法(中英文版) Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete |
![]() |
|
![]() |
GB/T 29418-2012 塑木复合材料产品物理力学性能测试(中英文版) Test methods for mechannical and physical properties of wood-plastic composite product |
![]() |
|
![]() |
GB/T 8077-2012 混凝土外加剂匀质性试验方法(中英文版) Methods for testing uniformity of concrete admixture |
![]() |
|
![]() |
GB/T 18861-2012 汽车轮胎和摩托车轮胎滚动阻力试验方法 多点试验(中英文版) Test methods of rolling resistance for motor vehicle tyres and motorcycle tyres - Multi-point test |
![]() |
|
![]() |
GB/T 29040-2012 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性(中英文版) Test methods of rolling resistance for motor vehicle tyres - Single point test and correlation of measurement results |
![]() |
|
![]() |
GB/T 29046-2012 城镇供热预制直埋保温管道技术指标检测方法(中英文版) Test methods of technical specification for pre-insulated directly buried district heating pipes |
![]() |
|
![]() |
GB/T 29295-2012 反射型自镇流LED灯性能测试方法(中英文版) Test methods of performance of self-ballasted LED reflector lamps |
![]() |
|
![]() |
GB/T 29459.2-2012 在役承压设备金属材料小冲杆试验方法 第2部分:室温下拉伸性能的试验方法(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 2:Method of test for tensile properties at room temperature |
![]() |
|
![]() |
GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版) Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings |
![]() |
|
![]() |
GB/T 28745-2012 家用太阳能热水系统储水箱试验方法(中英文版) Test methods for storage tank of domestic solar water heating system |
![]() |
|
![]() |
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
![]() |
|
![]() |
GB/T 14999.2-2012 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验(中英文版) Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch |
![]() |
|
![]() |
GB/T 14999.3-2012 高温合金试验方法 第3部分:棒材纵向断口检验(中英文版) Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars |
![]() |
|
![]() |
GB/T 28900-2012 钢筋混凝土用钢材试验方法(中英文版) Test methods of steel for reinforcement of concrete |
![]() |
|
![]() |
GB/T 18029.21-2012 轮椅车 第21部分:电动轮椅车、电动代步车和电池充电器的电磁兼容性要求和测试方法(中英文版) Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
![]() |
|
![]() |
GB/T 50329-2012 木结构试验方法标准(中英文版) Standard for test methods of timber structures |
![]() |
找到:989條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [4] [5] [6] [7] [8] [9] [10] |