中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 328.7-2007
建筑防水卷材试验方法 第7部分:高分子防水卷材 长度、宽度、平直度和平整度(中英文版)
Test methods for building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and flatness
 
GB/T 328.22-2007
建筑防水卷材试验方法 第22部分:沥青防水卷材 接缝剪切性能(中英文版)
Test methods foe building sheets for waterproofing - Part 22: Bitumen sheets for waterproofing-resistance to shearing of joints
 
GB/T 328.5-2007
建筑防水卷材试验方法 第5部分:高分子防水卷材 厚度、单位面积质量(中英文版)
Test methods for building sheets for waterproofing - Part 5: Plastic and rubber sheets for waterproofing-thickness and mass per unit area
 
GB/T 328.4-2007
建筑防水卷材试验方法 第4部分:沥青防水卷材 厚度、单位面积质量(中英文版)
Test methods for building sheets for waterproofing - Part 4: Bitumen sheets for waterproofing-thickness and mass per unit area
 
GB/T 328.3-2007
建筑防水卷材试验方法 第3部分:高分子防水卷材 外观(中英文版)
Test methods for building sheets for waterproofing - Part 3: Plastic and rubber sheets for waterproofing-visible defects
 
GB/T 328.27-2007
建筑防水卷材试验方法 第27部分:沥青和高分子防水卷材 吸水性(中英文版)
Test methods for building sheets for waterproofing - Part 27: Bitumen,plastic and rubber sheets for waterproofing-water absorption
 
GB/T 328.26-2007
建筑防水卷材试验方法 第26部分:沥青防水卷材 可溶物含量(浸涂材料含量)(中英文版)
Test methods for building sheets for waterproofing - Part 26: Bitumen sheets for waterproofing-dissoulble composite of membrane (impregnated and coated asphalt amount)
 
GB/T 328.25-2007
建筑防水卷材试验方法 第25部分:沥青和高分子防水卷材 抗静态荷载(中英文版)
Test methods for building sheets for waterproofing - part 25: Bitumen,plastic and rubber sheets for waterproofing-resistance to static loading
 
GB/T 328.24-2007
建筑防水卷材试验方法 第24部分:沥青和高分子防水卷材 抗冲击性能(中英文版)
Test methods for building sheets for waterproofing - Part 24: Bitumen,plastic and rubber sheets for waterproofing-resistance to impact
 
GB/T 328.23-2007
建筑防水卷材试验方法 第23部分:高分子防水卷材 接缝剪切性能(中英文版)
Test methods for building sheets for waterproofing - Part 23: Plastic and rubber sheets for waterproofing-resistance to shearing of joints
 
GB/T 328.6-2007
建筑防水卷材试验方法 第6部分:沥青防水卷材 长度、宽度和平直度(中英文版)
Test methods for building sheets for waterproofing - Part 6: Bitumen sheets for waterproofing-length,width and straightness
 
GB/T 5169.11-2006
电工电子产品着火危险试验 第11部分:灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法(中英文版)
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
 
GB/T 5169.10-2006
电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法(中英文版)
Fire hazard testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure
 
GB/T 2423.37-2006
电工电子产品环境试验 第2部分:试验方法 试验L:沙尘试验(中英文版)
Environmental testing for electric and electronic products - Part 2: Test methods - Test L:Dust and sand
 
GB/T 2423.56-2006
电工电子产品环境试验 第2部分:试验方法 试验Fh:宽带随机振动(数字控制)和导则(中英文版)
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fh: Vibration、broad-band random(digital control) and guidance
 
GB/T 17911-2006
耐火材料 陶瓷纤维制品试验方法(中英文版)
Refractory products - Methods of test for ceramic fibre products
 
GB/T 2941-2006
橡胶物理试验方法试样制备和调节通用程序(中英文版)
Rubber - General procedures for preparing and conditioning test pieces for physical test methods
 
GB/T 20183.3-2006
植物保护机械 喷雾设备 第3部分:农业液力喷雾机每公顷施液量调节系统试验方法(中英文版)
Equipment for crop protection - Spraying equipment - Part 3: Test methods for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
 
GB/T 20183.2-2006
植物保护机械 喷雾设备 第2部分:液力喷雾机试验方法(中英文版)
Equipment for crop protection - Spraying equipment - Part 2: Test methods for hydraulic sprayers
 
GB/T 20183.1-2006
植物保护机械 喷雾设备 第1部分:喷雾机喷头试验方法(中英文版)
Equipment for crop protection - Spraying equipment - Part 1: Test methods for sprayer nozzles
 
GB/T 2423.55-2006
电工电子产品环境试验 第2部分: 环境测试 试验Eh:锤击试验(中英文版)
Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: Hammer tests
 
GB/T 7784-2006
机动往复泵试验方法(中英文版)
Test methods for power reciprocating pumps
 
GB/T 19973.2-2005
医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版)
Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process
 
GB/T 5170.18-2005
电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments
 
GB/T 19816.7-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture
 
GB/T 19816.6-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter
 
GB/T 19816.5-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
 
GB 16838-2005
消防电子产品 环境试验方法及严酷等级(中英文版)
Environmental test methods and severities for fire electronic products
 
GB/T 5170.20-2005
电工电子产品环境试验设备 基本参数检定方法 水试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments
 
GB/T 5170.19-2005
电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments
 
GB/T 5170.17-2005
电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments
 
GB/T 2423.28-2005
电工电子产品环境试验 第2部分:试验方法 试验T:锡焊(中英文版)
Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering
 
GB/T 2423.27-2005
电工电子产品环境试验 第2部分:试验方法 试验Z/AMD:低温/低气压/湿热连续综合试验(中英文版)
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test
 
GB/T 19816.3-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness
 
GB/T 19816.2-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution
 
GB/T 19816.1-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling
 
GB/T 19816.4-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density
 
GB/T 3362-2005
碳纤维复丝拉伸性能试验方法(中英文版)
Test methods for tensile properties of carbon fiber multifilament
 
GB/T 15812.1-2005
非血管内导管 第1部分:一般性能试验方法(中英文版)
Catheters other than intravascular catheters-Part 1:Test methods for common properties
 
GB/T 5170.16-2005
电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机(中英文版)
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test
 
GB/T 5170.15-2005
电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台(中英文版)
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test
 
GB/T 5170.13-2005
电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台(中英文版)
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test
 
GB/T 2423.54-2005
电工电子产品环境试验 第2部分:试验方法 试验Xc:流体污染(中英文版)
Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination
 
GB/T 2423.53-2005
电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损(中英文版)
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
 
GB/T 18802.21-2004
低压电涌保护器 第21部分:电信和信号网络的电涌保护器(SPD)----性能要求和试验方法(中英文版)
Low-voltage surge protective devices--Part 21:Surge protective devices connected to telecommunications and signalling networks--Performance requirements and testing methods
 
GB/T 2423.52-2003
电工电子产品环境试验 第2部分:试验方法 试验77:结构强度与撞击(中英文版)
Environmental testing for electric and electronic products--Part 2:Test methods--Test 77:Body strength and impact shock
 
GB/T 5137.2-2002
汽车安全玻璃试验方法 第2部分:光学性能试验(中英文版)
Road vehicles--Safety glazing materials--Part 2:Test methods for optical properties
 
GB/T 5137.1-2002
汽车安全玻璃试验方法 第1部分:力学性能试验(中英文版)
Road vehicles--Safety glazing materials--Part 1:Test methods for mechanical properties
 
GB/T 18791-2002
电子和电气陶瓷性能试验方法(中英文版)
Test methods for ceramic properties for electronic and electrical application
 
GB/T 16656.34-2002
工业自动化系统与集成 产品数据的表达与交换 第34部分:一致性测试方法论与框架:应用协议实现的抽象测试方法(中英文版)
Industrial automation systems and integration--Product data representation and exchange--Part 34:Conformance testing methodology and framework:Abstract test methods for application protocol implementations
 

找到:443條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [2] [3] [4] [5] [6] [7] [8]