中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 10066.3-2014 电热装置的试验方法 第3部分:有心感应炉和无心感应炉(中英文版) Test methods for electroheat installations―Part 3: Induction channel and induction crucible furnaces |
|||
GB/T 12967.4-2014 铝及铝合金阳极氧化膜检测方法 第4部分:着色阳极氧化膜耐紫外光性能的测定(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
|||
GB/T 7019-2014 纤维水泥制品试验方法(中英文版) Test methods for fiber cement prdoucts |
|||
GB/T 4372.6-2014 直接法氧化锌化学分析方法 第6部分:金属锌的检验(中英文版) Methods for chemical analysis of zincoxide produced by direct process―Part 6:Testing of metallic zinc |
|||
GB/T 31035-2014 质子交换膜燃料电池电堆低温特性试验方法(中英文版) Test methods for proton exchange membrane fuel cell stack at subzero environment |
|||
GB/T 4996-2014 联运通用平托盘 试验方法(中英文版) General-purpose flat pallets for through transit of goods—Test methods |
|||
GB 12676-2014 商用车辆和挂车制动系统技术要求及试验方法(中英文版) Technical requirements and testing methods for commercial vehicle and trailer braking systems |
|||
GB/T 2423.20-2014 环境试验 第2部分:试验方法 试验Kd:接触点和连接件的硫化氢试验(中英文版) Environmental testing—Part 2:Test methods—Test Kd: Hydrogen sulphide test for contacts and connections |
|||
GB/T 2424.12-2014 环境试验 第2部分:试验方法 试验Kd:接触点和连接件的硫化氢试验导则(中英文版) Environmental testing—Part 2: Test methods—Guidance to test Kd: Hydrogen sulphide test for contacts and connections |
|||
GB/Z 5169.34-2014 电工电子产品着火危险试验 第34部分:着火危险评定导则 起燃性 试验方法概要和相关性(中英文版) Fire hazard testing for electric and eletronic products—Part 34: Guidance for assessing the fire hazard—Ignitability—Summary and relevance of test methods |
|||
GB/T 22517.10-2014 体育场地使用要求及检验方法 第10部分:壁球场地(中英文版) Technical requirements and test methods for sports field—Part 10: Squash |
|||
GB/T 31101-2014 信息技术 自动识别和数据采集技术 实时定位系统性能测试方法(中英文版) Information technology—Automatic identification and data capture techniques—Real-time locating system performance test methods |
|||
GB/T 5169.38-2014 电工电子产品着火危险试验 第38部分:燃烧流的毒性 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products―Part 38: Toxicity of fire effluent―Summary and relevance of test methods |
|||
GB/T 31128-2014 毛巾产品毛圈钩拉力测试方法(中英文版) Test methods for the resistance to pile loop extraction of towel product |
|||
GB/T 21294-2014 服装理化性能的检验方法(中英文版) Testing methods of physical and chemical performance of garments |
|||
GB/T 22517.11-2014 体育场地使用要求及检验方法 第11部分:曲棍球场地(中英文版) Technical requirements and test methods for sports field―part 11: Hockey |
|||
GB/T 20404-2014 功能障碍者移位机 要求和试验方法(中英文版) Hoists for the transfer of disabled persons―Requirements and test methods |
|||
GB/T 10066.5-2014 电热装置的试验方法 第5部分:电热和电化学用等离子体设备(中英文版) Test methods for electroheat installations—Part 5:Plasma equipment for electroheat and electrochemical applications |
|||
GB/T 30860-2014 太阳能电池用硅片表面粗糙度及切割线痕测试方法(中英文版) Test methods for surface roughness and saw mark of silicon wafers for solar cells |
|||
GB/T 12785-2014 潜水电泵 试验方法(中英文版) Test methods for submersible motor-pumps |
|||
GB/T 11017.1-2014 额定电压110kV(Um=126kV)交联聚乙烯绝缘电力电缆及其附件 第1部分:试验方法和要求(中英文版) Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV(Um=126 kV)―Part 1: Test methods and requirements |
|||
GB/T 13203-2014 摩托车轮胎性能试验方法(中英文版) Test methods for verifying capabilities of motorcycle tyres |
|||
GB/T 30790.6-2014 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分:实验室性能测试方法(中英文版) Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods |
|||
GB/T 5211.15-2014 颜料和体质颜料通用试验方法 第15部分:吸油量的测定(中英文版) General methods of test for pigments and extenders―Part 15:Determination of oil absorption value |
|||
GB/T 10870-2014 蒸气压缩循环冷水(热泵)机组性能试验方法(中英文版) The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle |
|||
GB/T 30810-2014 水泥胶砂中可浸出重金属的测定方法(中英文版) Test methods for leachable ions of heavy metals in cement mortar |
|||
GB/T 30834-2014 钢中非金属夹杂物的评定和统计 扫描电镜法(中英文版) Standard test methods for rating and classifying inclusions in steel―Scanning Electron Microscope |
|||
GB/T 19519-2014 架空线路绝缘子 标称电压高于1 000 V交流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则(中英文版) Insulators for overhead lines―Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000V―Definitions, test methods and acceptance criteria |
|||
GB/T 30735-2014 屋顶及屋顶覆盖制品外部对火反应试验方法(中英文版) Test methods for external exposure of roofs and roof coverings to fire |
|||
GB/T 6553-2014 严酷环境条件下使用的电气绝缘材料 评定耐电痕化和蚀损的试验方法(中英文版) Electrical insulating materials used under severe ambient conditions―Test methods for evaluating resistance to tracking and erosion |
|||
GB/T 19753-2013 轻型混合动力电动汽车能量消耗量试验方法(中英文版) Test methods for energy consumption of light-duty hybrid electric vehicles |
|||
GB/T 4111-2013 混凝土砌块和砖试验方法(中英文版) Test methods for the concrete block & brick |
|||
GB/T 11446.3-2013 电子级水测试方法通则(中英文版) Generic rules for test methods of electronic grade water |
|||
GB/T 30301-2013 高纯试剂试验方法通则(中英文版) General rule for test methods of highly purified reagents |
|||
GB/T 5169.20-2013 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|||
GB/T 30268.1-2013 信息技术 生物特征识别应用程序接口(BioAPI)的符合性测试 第1部分:方法和规程(中英文版) Information technology—Conformance testing for the biometric application programming interface (BioAPI)—Part 1: Methods and procedures |
|||
GB/T 13722-2013 移动通信电源技术要求和试验方法(中英文版) Performance requirements and testing methods for power supplies used in the mobile communication |
|||
GB/T 30100-2013 建筑墙板试验方法(中英文版) Test methods for building wallboard |
|||
GB/T 30454-2013 LED用稀土硅酸盐荧光粉试验方法(中英文版) Test methods of silicate phosphors activated by rare earths for LED |
|||
GB/T 30457-2013 灯用稀土紫外发射荧光粉试验方法(中英文版) Test methods of rare earth ultraviolet emission phosphors for fluorescent lamps |
|||
GB/T 30475.1-2013 压缩空气过滤器 试验方法 第1部分:悬浮油(中英文版) Filters for compressed air―Test methods―Part 1: Oil aerosols |
|||
GB/T 30475.2-2013 压缩空气过滤器 试验方法 第2部分:油蒸气(中英文版) Filters for compressed air― Test methods―Part 2: Oil vapours |
|||
GB/T 5983-2013 种子清选机试验方法(中英文版) Test methods for seed cleaning machine |
|||
GB 30228-2013 运动场地地面冲击衰减的安全性能要求和试验方法(中英文版) Safety requirements and test methods for impact attenuation of playground surfacing |
|||
GB/T 30427-2013 并网光伏发电专用逆变器技术要求和试验方法(中英文版) Technical requirements and test methods for grid-connected PV inverters |
|||
GB/T 30103.1-2013 冷库热工性能试验方法 第1部分:温度和湿度检测(中英文版) Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing |
|||
GB/T 5169.12-2013 电工电子产品着火危险试验 第12部分:灼热丝/热丝基本试验方法 材料的灼热丝可燃性指数(GWFI)试验方法(中英文版) Fire hazard testing for electric and electronic products―Part 12: Glowing/hot-wire based test methods―Glow-wire flammability index (GWFI) test method for materials |
|||
GB/T 5169.13-2013 电工电子产品着火危险试验 第13部分:灼热丝/热丝基本试验方法 材料的灼热丝起燃温度(GWIT)试验方法(中英文版) Fire hazard testing for electric and electronic product―Part 13:Glowing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials |
|||
GB/T 4757-2013 煤粉(泥)实验室单元浮选试验方法(中英文版) Methods for the batch flotation testing of fine coal |
|||
GB/T 30177.1-2013 过滤机性能测试方法 第1部分:加压过滤机(中英文版) Methods of perfomance testing for filters―Part 1:Press filter |
|||
GB/T 30103.2-2013 冷库热工性能试验方法 第2部分:风速检测(中英文版) Methods of testing for thermal performance on cold store―Part 2: Air velocity testing |
|||
GB/T 30103.3-2013 冷库热工性能试验方法 第3部分:围护结构热流量检测(中英文版) Methods of testing for thermal performance on cold store―Part 3: Heat flux testing for envelope enclosure |
|||
GB/T 30040.7-2013 双层罐渗漏检测系统 第7部分:双层间隙、防渗漏衬里及防渗漏外套的一般要求和试验方法(中英文版) Leak detection systems―Part 7:General requirements and test methods for interstitial spaces,leak protecting linings and leak protecting jacket |
|||
GB 29993-2013 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法(中英文版) Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods |
|||
GB/T 27797.4-2013 纤维增强塑料 试验板制备方法 第4部分:预浸料模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 4:Moulding of prepregs |
|||
GB/T 12967.5-2013 铝及铝合金阳极氧化膜检测方法 第5部分:用变形法评定阳极氧化膜的抗破裂性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation |
|||
GB/T 30032.2-2013 移动式升降工作平台 带有特殊部件的设计、计算、安全要求和试验方法 第2部分:装有非导电(绝缘)部件的移动式升降工作平台(中英文版) Mobile elevating work platforms - Design, calculations,safety requirements and test methods relative to special features - Part 2: MEWPs with non-conductive (insulating)components |
|||
GB/T 30028-2013 电动葫芦能效测试方法(中英文版) Energy efficiency test methods for electrical hoists |
|||
GB/T 2423.24-2013 环境试验 第2部分:试验方法 试验Sa:模拟地面上的太阳辐射及其试验导则(中英文版) Environmental testing - Part 2: Test methods - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
|||
GB/T 27748.2-2013 固定式燃料电池发电系统 第2部分:性能试验方法(中英文版) Stationary fuel cell power systems - part 2: Performance test methods |
|||
GB/T 2424.11-2013 环境试验 第2部分:试验方法 试验Kc:接触点和连接件的二氧化硫试验导则(中英文版) Environmental testing - Part 2: Test methods - Guidance to test Kc: Sulphur dioxide test for contacts and connections |
|||
GB/T 29847-2013 印制板用铜箔试验方法(中英文版) Test methods for copper foil used for printed boards |
|||
GB/T 2423.19-2013 环境试验 第2部分:试验方法 试验Kc:接触点和连接件的二氧化硫试验(中英文版) Environmental testing - Part 2: Test methods - Test Kc: Sulphur dioxide test for contacts and connections |
|||
GB/T 29823-2013 试验用空气焓值法试验装置检验方法(中英文版) Rating methods for test air enthalpy testing facility |
|||
GB/T 29895-2013 横向振动法测试木质材料动态弯曲弹性模量方法(中英文版) Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration |
|||
GB/T 12642-2013 工业机器人 性能规范及其试验方法(中英文版) Industrial robots - Performance criteria and related test methods |
|||
GB/T 30001.5-2013 信息技术 基于射频的移动支付 第5部分:射频接口测试方法(中英文版) Information technology - RF-based mobile payment - Part 5: Test methods of radio frequency interface |
|||
GB 15086-2013 汽车门锁及车门保持件的性能要求和试验方法(中英文版) Motor vehicles’ door locks and retention components performance requirements and test methods |
|||
GB 15085-2013 汽车风窗玻璃刮水器和洗涤器 性能要求和试验方法(中英文版) Motor vehicles-windscreen wiper and washer systems - Performance requirements and test methods |
|||
GB 17578-2013 客车上部结构强度要求及试验方法(中英文版) Requirements and test methods of strength for the superstructure of bus |
|||
GB/T 29756-2013 干混砂浆物理性能试验方法(中英文版) Test methods of physical property for dry-mix mortar |
|||
GB/T 16903.2-2013 标志用图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility |
|||
GB/T 19264.2-2013 电气用压纸板和薄纸板 第2部分:试验方法(中英文版) Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
|||
GB/T 29627.2-2013 电气用聚芳酰胺纤维纸板 第2部分:试验方法(中英文版) Aramid pressboard for electrical purposes - Part 2: Methods of test |
|||
GB/T 20629.2-2013 电气用非纤维素纸 第2部分:试验方法(中英文版) Non-cellulosic paper for electrical purposes - Part 2:Methods of test |
|||
GB/T 50266-2013 工程岩体试验方法标准(中英文版) Standard for test methods of engineering rock mass |
|||
GB/T 18029.24-2012 轮椅车 第24部分:乘坐者操纵的爬楼梯装置的要求和测试方法(中英文版) Wheelchairs - Part 24:Requirements and test methods for user-operated stair climbing devices |
|||
GB/T 29247-2012 工业自动化仪表通用试验方法(中英文版) General methods for testing the performance of industrial process measurement and control instruments |
|||
GB/T 29235.2-2012 接入设备节能参数和测试方法 第2部分:ADSL局端(中英文版) Energy efficiency metrologies and test methods for access equipments - Part 2: ADSL DSLAM |
|||
GB/T 29235.1-2012 接入设备节能参数和测试方法 第1部分:ADSL用户端(中英文版) Energy efficiency metrology and test methods for access equipments - Part 1:ADSL CPE |
|||
GB/T 29199-2012 光缆防鼠性能测试方法(中英文版) Test methods for rodent resistance of optical fiber cable |
|||
GB/T 28993-2012 结构用锯材力学性能测试方法(中英文版) Standard test methods for mechanical properties of structural lumber |
|||
GB/T 13973-2012 半导体管特性图示仪通用规范(中英文版) General specification test methods for semiconductor device curve tracers |
|||
GB/T 29459.1-2012 在役承压设备金属材料小冲杆试验方法 第1部分:总则(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 1:General requirements |
|||
GB/T 29458-2012 体育场馆LED显示屏使用要求及检验方法(中英文版) Requirements and test methods for LED screen in sports venues |
|||
GB/T 18029.14-2012 轮椅车 第14部分:电动轮椅车和电动代步车动力和控制系统 要求和测试方法(中英文版) Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooter - Requirements and test methods |
|||
GB/T 29459.2-2012 在役承压设备金属材料小冲杆试验方法 第2部分:室温下拉伸性能的试验方法(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 2:Method of test for tensile properties at room temperature |
|||
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
|||
GB/T 29272-2012 信息技术 射频识别设备性能测试方法 系统性能测试方法(中英文版) Information technology - Radio frequency identification device performance test methods - Test methods for system performance |
|||
GB/T 11417.5-2012 眼科光学 接触镜 第5部分: 光学性能试验方法(中英文版) Ophthalmic optics - Contact lenses - Part 5: Testing methods for optical properties |
|||
GB/T 18861-2012 汽车轮胎和摩托车轮胎滚动阻力试验方法 多点试验(中英文版) Test methods of rolling resistance for motor vehicle tyres and motorcycle tyres - Multi-point test |
|||
GB/T 7196-2012 用液体萃取测定电气绝缘材料离子杂质的试验方法(中英文版) Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids |
|||
GB/T 29307-2012 电动汽车用驱动电机系统可靠性试验方法(中英文版) The reliability test methods of drive motor system for electric vehicles |
|||
GB/T 29295-2012 反射型自镇流LED灯性能测试方法(中英文版) Test methods of performance of self-ballasted LED reflector lamps |
|||
GB/T 29046-2012 城镇供热预制直埋保温管道技术指标检测方法(中英文版) Test methods of technical specification for pre-insulated directly buried district heating pipes |
|||
GB/T 29041-2012 汽车轮胎道路磨耗试验方法(中英文版) Road wear testing methods for motor vehicle tyres |
|||
GB/T 2542-2012 砌墙砖试验方法(中英文版) Test methods for wall bricks |
|||
GB/T 8077-2012 混凝土外加剂匀质性试验方法(中英文版) Methods for testing uniformity of concrete admixture |
|||
GB/T 29418-2012 塑木复合材料产品物理力学性能测试(中英文版) Test methods for mechannical and physical properties of wood-plastic composite product |
|||
GB/T 29417-2012 水泥砂浆和混凝土干燥收缩开裂性能试验方法(中英文版) Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete |
|||
GB/T 1864-2012 颜料和体质颜料通用试验方法 颜料颜色的比较(中英文版) General methods of test for pigments and extenders - Comparison of colour of pigments |
|||
GB/T 15344-2012 滑石物理检验方法(中英文版) Methods for physical test of talc |
|||
GB/T 29125-2012 压缩天然气汽车燃料消耗量试验方法(中英文版) Test methods for fuel consumption of CNG vehicles |
|||
GB/T 28958-2012 乘用车低温性能试验方法(中英文版) Test methods of low temperature performance for passenger car |
|||
GB/T 29160-2012 带辅助能源的太阳能热水系统(储水箱容积大于0.6m3)性能试验方法(中英文版) Test methods for solar-plus-supplementary water heating system (tank capacity more than 0.6m3) |
|||
GB/T 29040-2012 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性(中英文版) Test methods of rolling resistance for motor vehicle tyres - Single point test and correlation of measurement results |
找到:1006條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |