中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB/T 4393-2008 呆扳手、梅花扳手、两用扳手 技术规范（中英文版） Open end wrenches, box wrenches and combination wrenches - Technical specifications |
 |
|
|
|
GB/T 16758-2008 排风罩的分类及技术条件（中英文版） The classification and technical specification of exhaust hood |
|
|
|
|
GB/T 16453.5-2008 水土保持综合治理 技术规范 风沙治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of wind erosion |
|
|
|
|
GB/T 16453.4-2008 水土保持综合治理 技术规范 小型蓄排引水工程（中英文版） Technical specification for comprehensive control of soil and water conservation - Small engineering of store, drainage and draw water |
|
|
|
|
GB/T 16453.3-2008 水土保持综合治理 技术规范 沟壑治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of gullies |
|
|
|
|
GB/T 16453.2-2008 水土保持综合治理 技术规范 荒地治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of waste land |
|
|
|
|
GB/T 16453.1-2008 水土保持综合治理 技术规范 坡耕地治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of slope land |
|
|
|
|
GB/T 16453.6-2008 水土保持综合治理 技术规范 崩岗治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of collapse hill |
|
|
|
|
GB/T 19290.3-2008 发展中的电子设备构体机械结构模数序列 第2-1部分：分规范 25mm设备构体的接口协调尺寸 详细规范 机柜和机架的尺寸（中英文版） Modular order for the development of mechanical structures for electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and r |
|
|
|
|
GB/T 14173-2008 水利水电工程钢闸门制造、安装及验收规范（中英文版） Specification for manufacture, installation and acceptance of steel gate in hydraulic and hydroelectric engineering |
|
|
|
|
GB/T 22402-2008 摄影 加工用化学品 无水硫代硫酸钠和五水合硫代硫酸钠（中英文版） Photography - Processing chemicals - Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate |
|
|
|
|
GB/T 22404-2008 摄影 加工用化学品 无水碳酸钠和一水合碳酸钠（中英文版） Photography - Processing chemicals - Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate |
|
|
|
|
GB/T 4327-2008 消防技术文件用消防设备图形符号（中英文版） Equipment for fire protection and fire fighting graphical symbols for fire protection plans-specification |
|
|
|
|
GB/T 17645.102-2008 工业自动化系统与集成 零件库 第102部分：符合GB/T 16656一致性规范的视图交换协议（中英文版） Industrial automation systems and integration - Parts library - Part 102: View exchange protocol by ISO 10303 conforming specification |
|
|
|
|
GB/T 22384-2008 电力系统安全稳定控制系统检验规范（中英文版） Testing specification of security and stability control system for power system |
|
|
|
|
GB/T 11920-2008 电站电气部分集中控制设备及系统通用技术条件（中英文版） General specification of central control equipment and system for electrical parts in power stations and substations |
|
|
|
|
GB/T 12001.1-2008 塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 22352-2008 土方机械 吊管机 术语和商业规格（中英文版） Earth-moving machinery - Pipelayers - Terminology and commercial specifications |
|
|
|
|
GB/T 10417-2008 碳化钨钢结硬质合金技术条件及其力学性能的测试方法（中英文版） Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness |
|
|
|
|
GB/T 7497.1-2008 微处理器系统总线 8位及16位数据(MULTIBUS I) 第１部分: 电气与定时规范的功能描述（中英文版） Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 1: Functional description with electrical and timing specifications |
|
|
|
|
GB/T 22271.1-2008 塑料 聚甲醛（POM）模塑和挤塑材料 第1部分：命名系统和分类基础（中英文版） Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 1404.1-2008 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范（中英文版） Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 12010.1-2008 塑料 聚乙烯醇材料（PVAL） 第1部分：命名系统和分类基础（中英文版） Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 3403.1-2008 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第1部分： 命名系统和分类基础（中英文版） Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 21461.1-2008 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 21460.1-2008 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics － Styrene-acrylonitrile (SAN) moulding and extrusion materials － Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 20417.1-2008 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics － Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials － Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 18964.1-2008 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分：命名系统和分类基础（中英文版） Plastics － Impact-resistant Polystyrene (PS-I) moulding and extrusion materials －Part 1: Designation system and basis for specifications |
|
|
|
|
GB/T 6378.1-2008 计量抽样检验程序 第1部分：按接收质量限（AQL）检索的对单一质量特性和单个AQL的逐批检验的一次抽样方案（中英文版） Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|
|
|
|
GB/T 17548-2008 信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南（中英文版） Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards |
|
|
|
|
GB/T 1592.1-2008 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分：通用要求、安全要求、防护罩尺寸和空隙范围（中英文版） Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone |
|
|
|
|
GB/T 2613-2008 工业过程测量和控制系统用电动仪表通用技术条件（中英文版） Electronic instrument general technical specification for industria-process measurement and control system |
|
|
|
|
GB/T 22076-2008 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验（中英文版） Pneumatic fluid power - Cylindrical quick-action couplings - Plug connecting dimensions, specifications, application guidelines and testing |
|
|
|
|
GB 22128-2008 报废汽车回收拆解企业技术规范（中英文版） Technical specifications for End-of-Life Vehicles recycling and dismantling enterprise |
|
|
|
|
GB/T 22072-2008 干式非晶合金铁心配电变压器技术参数和要求（中英文版） Specifications and technical requirements for dry-type amorphous alloy core distribution transformers |
|
|
|
|
GB/T 10969-2008 水轮机、蓄能泵和水泵水轮机通流部件技术条件（中英文版） Specification for water passage components of hydraulic turbines, storage pumps and pump-turbines |
|
|
|
|
GB/T 1631-2008 离子交换树脂命名系统和基本规范（中英文版） Designation system and basis for specifications of ion exchange resins |
|
|
|
|
GB/T 17200-2008 橡胶塑料拉力、压力和弯曲试验机（恒速驱动） 技术规范（中英文版） Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) |
|
|
|
|
GB/T 13913-2008 金属覆盖层 化学镀镍-磷合金镀层 规范和试验方法（中英文版） Metallic coatings - Autocatalytic (Electroless) nickel-phosphorus alloy coatings - Specification and test methods |
|
|
|
|
GB/T 11805-2008 水轮发电机组自动化元件(装置)及其系统基本技术条件（中英文版） Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets |
|
|
|
|
GB/T 22101.1-2008 棉花抗病虫性评价技术规范 第1部分：棉铃虫（中英文版） Technical specification for evaluating resistance of cotton to disease and insect pests - Part 1: Cotton bollworm |
|
|
|
|
GB/T 18910.3-2008 液晶和固态显示器件 第3部分: 液晶显示屏分规范（中英文版） Liquid crystal and solid-state display devices - Part 3: Sectional specification for liquid crystal display (LCD) cells |
|
|
|
|
GB/T 10077-2008 锂原电池分类、型号命名及基本特性（中英文版） Classification, designation nomenclature and basic specifications for lithium primary batteries |
|
|
|
|
GB 14196.3-2008 白炽灯 安全要求 第3部分：卤钨灯(非机动车辆用)（中英文版） Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
|
|
|
|
GB/T 21974-2008 YZRW系列起重及冶金用涡流制动绕线转子三相异步电动机技术条件（中英文版） Technical specification for YZRW range of eddy-current braking wound-rotor three-phase induction motors for crane and metallurgical application |
|
|
|
|
GB/T 21972.1-2008 起重及冶金用变频调速三相异步电动机技术条件 第1部分：YZP系列起重及冶金用变频调速三相异步电动机（中英文版） Technical specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical application - Part 1:YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applicati |
|
|
|
|
GB/T 21955-2008 农林拖拉机和机械 纸基摩擦片 技术条件（中英文版） Tractors and machinery for agriculture and forestry - Paper friction disc - Technical specifications |
|
|
|
|
GB/T 6682-2008 分析实验室用水规格和试验方法（中英文版） Water for analytical laboratory use - Specification and test methods |
|
|
|
|
GB/T 21873-2008 橡胶密封件 给、排水管及污水管道用接口密封圈 材料规范（中英文版） Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials |
|
|
|
|
GB/T 21717-2008 小型水轮机型式参数及性能 技术规定（中英文版） Technical specification about the type parameter and performance of small hydraulic turbines |
|
|
|
|
GB/T 21646-2008 400MHz频段模拟公众无线对讲机技术规范和测量方法（中英文版） Technical specification and testing methods for analog public radio interphone on 400MHz band |
|
|
|
|
GB/T 15972.10-2008 光纤试验方法规范 第10部分：测量方法和试验程序 总则（中英文版） Specifications for optical fibre test methods - Part 10: Measurement methods and test procedures - General and guidance |
|
|
|
|
GB/T 15972.50-2008 光纤试验方法规范 第50部分：环境性能的测量方法和试验程序 恒定湿热（中英文版） Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) |
|
|
|
|
GB/T 15972.40-2008 光纤试验方法规范 第40部分：传输特性和光学特性的测量方法和试验程序 衰减（中英文版） Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation |
|
|
|
|
GB/T 15972.30-2008 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验（中英文版） Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test |
|
|
|
|
GB/T 15972.20-2008 光纤试验方法规范 第20部分：尺寸参数的测量方法和试验程序 光纤几何参数（中英文版） Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry |
|
|
|
|
GB/T 18838.3-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂（中英文版） Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit |
|
|
|
|
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义（中英文版） Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|
|
|
|
GB/T 18838.4-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸（中英文版） Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot |
|
|
|
|
GB/T 15972.43-2008 光纤试验方法规范 第43部分：传输特性和光学特性的测量方法和试验程序 数值孔径（中英文版） Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture |
|
|
|
|
GB/T 15972.22-2008 光纤试验方法规范 第22部分：尺寸参数的测量方法和试验程序 长度（中英文版） Specifications for optical fibre test methods - Part 22: Measurement methods and test procedures for dimensions - Length measurement |
|
|
|
|
GB/T 15972.31-2008 光纤试验方法规范 第31部分：机械性能的测量方法和试验程序 抗张强度（中英文版） Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength |
|
|
|
|
GB/T 15972.32-2008 光纤试验方法规范 第32部分：机械性能的测量方法和试验程序 涂覆层可剥性（中英文版） Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability |
|
|
|
|
GB/T 15972.33-2008 光纤试验方法规范 第33部分：机械性能的测量方法和试验程序 应力腐蚀敏感性参数（中英文版） Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
|
|
|
|
GB/T 15972.34-2008 光纤试验方法规范 第34部分：机械性能的测量方法和试验程序 光纤翘曲（中英文版） Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical characteristics - Fibre curl |
|
|
|
|
GB/T 15972.41-2008 光纤试验方法规范 第41部分：传输特性和光学特性的测量方法和试验程序 带宽（中英文版） Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth |
|
|
|
|
GB/T 15972.44-2008 光纤试验方法规范 第44部分：传输特性和光学特性的测量方法和试验程序 截止波长（中英文版） Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength |
|
|
|
|
GB/T 15972.21-2008 光纤试验方法规范 第21部分：尺寸参数的测量方法和试验程序 涂覆层几何参数（中英文版） Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry |
|
|
|
|
GB/T 15972.53-2008 光纤试验方法规范 第53部分：环境性能的测量方法和试验程序 浸水（中英文版） Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water immersion |
|
|
|
|
GB/T 15972.42-2008 光纤试验方法规范 第42部分：传输特性和光学特性的测量方法和试验程序 波长色散（中英文版） Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion |
|
|
|
|
GB/T 15972.54-2008 光纤试验方法规范 第54部分：环境性能的测量方法和试验程序 伽玛辐照（中英文版） Specifications for optical fibre test methods - Part 54: Measurement methods and test procedures for environmental characteristics - Gamma irradiation |
|
|
|
|
GB/T 15972.52-2008 光纤试验方法规范 第52部分：环境性能的测量方法和试验程序 温度循环（中英文版） Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature |
|
|
|
|
GB/T 15972.51-2008 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热（中英文版） Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental characteristics - Dry heat |
|
|
|
|
GB/T 15972.49-2008 光纤试验方法规范 第49部分：传输特性和光学特性的测量方法和试验程序-微分模时延（中英文版） Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay |
|
|
|
|
GB/T 15972.47-2008 光纤试验方法规范 第47部分：传输特性和光学特性的测量方法和试验程序 宏弯损耗（中英文版） Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss |
|
|
|
|
GB/T 15972.46-2008 光纤试验方法规范 第46部分：传输特性和光学特性的测量方法和试验程序 透光率变化（中英文版） Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance |
|
|
|
|
GB/T 15972.45-2008 光纤试验方法规范 第45部分：传输特性和光学特性的测量方法和试验程序 模场直径（中英文版） Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter |
|
|
|
|
GB/T 4219.1-2008 工业用硬聚氯乙烯(PVC-U)管道系统 第1部分：管材（中英文版） Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes |
|
|
|
|
GB/T 10832-2008 船用离心泵、旋涡泵通用技术条件（中英文版） General specification for centrifigual and vortex pumps of ship |
|
|
|
|
GB/T 14563-2008 高岭土及其试验方法（中英文版） Specification and test method of Kaolin clay |
|
|
|
|
GB/T 5143-2008 工业车辆 护顶架 技术要求和试验方法（中英文版） lndustrial trucks - Overhead guards - Specification and testing |
|
|
|
|
GB/T 6113.102-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第1-2部分： 无线电骚扰和抗扰度测量设备 辅助设备 传导骚扰（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus-Ancillary equipment - Conducted disturbances |
|
|
|
|
GB/T 6113.104-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分： 无线电骚扰和抗扰度测量设备 辅助设备 辐射骚扰（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus-Ancillary equipment - Radiated disturbances |
|
|
|
|
GB/T 21430.1-2008 宽带数字通信（高速率数字接入通信网络）用对绞或星绞多芯对称电缆-户外电缆 第1部分：总规范（中英文版） Multicore and symmetrical pair/quad cables for broadband digital communications(high bit rate digital access telecommunication networks) Outside plant cables - Part 1: Generic specification |
|
|
|
|
GB/T 6113.201-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第2-1部分：无线电骚扰和抗扰度测量方法 传导骚扰测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
|
|
|
|
GB/T 6113.203-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第2-3部分：无线电骚扰和抗扰度测量方法 辐射骚扰测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
|
|
|
|
GB/T 7403.2-2008 牵引用铅酸蓄电池 第2部分: 产品品种和规格（中英文版） Lead-acid traction batteries - Part 2: Product types and specifications |
|
|
|
|
GB/T 6113.105-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz～1000MHz天线校准用试验场地（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz |
|
|
|
|
GB/T 21368-2008 钢铁企业能源计量器具配备和管理要求（中英文版） Specification for equipping and managing of measuring instrument of energy in the iron and steel industry |
|
|
|
|
GB/T 21367-2008 化工企业能源计量器具配备和管理要求（中英文版） Specification for equipping and managing of the measuring instrument of energy in chemical enterprise |
|
|
|
|
GB/T 21291-2007 鱼糜加工机械安全卫生技术条件（中英文版） Technical specifications of safety and sanitation for surimi processing machinery |
|
|
|
|
GB/T 15966-2007 水文仪器基本参数及通用技术条件（中英文版） Primary parameter and general specification for hydrologic instrument |
|
|
|
|
GB/T 10403-2007 多极和双通道感应移相器通用技术条件（中英文版） General specification for multipolar and two-speed induction phase shifters |
|
|
|
|
GB/T 778.1-2007 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第1部分：规范（中英文版） Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications |
|
|
|
|
GB/T 21127-2007 小麦抗旱性鉴定评价技术规范（中英文版） Technical specification of identification and evaluation for drought resistance in wheat |
|
|
|
|
GB/T 15803-2007 东亚飞蝗测报技术规范（中英文版） Technical specification for the investigation and forecast of locusta migratoria manilensis(Meyen) |
|
|
|
|
GB/T 21061-2007 国家电子政务网络技术和运行管理规范（中英文版） The specification of electronic government network technology and using management |
|
|
|
|
GB/Z 6113.403-2007 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分：不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3：Uncertainties,statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced |
|
|
|
|
GB/Z 6113.401-2007 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分: 不确定度、统计学和限值建模 标准化的EMC试验不确定度（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties,statistics and limit modelling - Uncertainties in standardized EMC tests |
|
|
|
|
GB/T 21056-2007 风机、泵类负载变频调速节电传动系统及其应用技术条件（中英文版） Specification for adjustable speed drive systems of electricity conservation with VF for fans and pumps |
|
|
|
|
GB/T 12763.5-2007 海洋调查规范 第5部分: 海洋声、光要素调查（中英文版） Specifications for oceanographic survey - Part 5: Survey of acoustical and optical parameters in the sea |
|
| 找到:1001條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |
