中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 5169.30-2020 电工电子产品着火危险试验 第30部分:热释放 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods |
|||
GB/T 39429-2020 无损检测 导电材料热电势分选方法(中英文版) Non-destructive testing—Method for thermoelectric sorting of electrically conductive materials |
|||
GB/T 39427-2020 无损检测 工业Ir192伽玛射线源尺寸测定方法(中英文版) Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source |
|||
GB/T 39382-2020 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法(中英文版) Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints |
|||
GB/T 39359-2020 积分球法测量悬浮式液固光催化制氢反应(中英文版) Integrating sphere method for the test of liquid/solid suspended photocatalytic hydrogen production reaction |
|||
GB/T 3362-2017/XG1-2020 《碳纤维复丝拉伸性能试验方法》国家标准第1号修改单(中英文版) Test methods for tensile properties of carbon fiber multifilament |
|||
GB/T 39283-2020 无损检测 电磁声换能器(EMAT)技术表面波检测方法(中英文版) Non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques |
|||
GB/T 39266-2020 工业机器人机械环境可靠性要求和测试方法(中英文版) Mechanical environment reliability requirements and test methods for industrial robots |
|||
GB/T 39265-2020 道路车辆 盲区监测(BSD)系统性能要求及试验方法(中英文版) Road vehicles—Performance requirements and testing methods for blind spot detection (BSD) system |
|||
GB/T 39227-2020 1000 V以下敏感过程电压暂降免疫时间测试方法(中英文版) Immunity time testing method under voltage dip for sensitive process rated less than 1000 V |
|||
GB/T 32065.8-2020 海洋仪器环境试验方法 第8部分:温度变化试验(中英文版) Environmental test methods for oceanographic instruments—Part 8:Change of temperature test |
|||
GB/T 32065.19-2020 海洋仪器环境试验方法 第19部分:浸渍试验(中英文版) Environmental test methods for oceanographic instruments—Part 19 : Immersion test |
|||
GB/T 32065.10-2020 海洋仪器环境试验方法 第10部分:盐雾试验(中英文版) Environmental test methods for oceanographic instruments—Part 10:Salt fog test |
|||
GB/T 13217.4-2020 油墨黏度检验方法(中英文版) Test method for viscosity of ink |
|||
GB/T 13217.1-2020 油墨颜色和着色力检验方法(中英文版) Test method for colour and tinctorial strength of ink |
|||
GB/T 6096-2020 坠落防护 安全带系统性能测试方法(中英文版) Fall protection— Performance test methods for fall protection systems |
|||
GB/T 5169.5-2020 电工电子产品着火危险试验 第5部分:试验火焰 针焰试验方法 装置、确认试验方法和导则(中英文版) Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance |
|||
GB/T 39323-2020 乘用车车道保持辅助(LKA)系统性能要求及试验方法(中英文版) Performance requirement and testing method for lane keeping assist (LKA) system of passenger cars |
|||
GB/T 3836.12-2019 爆炸性环境 第12部分:可燃性粉尘物质特性 试验方法(中英文版) Explosive atmospheres—Part 12:Material characteristics for combustible dusts—Test methods |
|||
GB/T 38413-2019 纺织品 细颗粒物过滤性能试验方法(中英文版) Textiles—Test methods for filtration of particulate matter |
|||
GB/T 50081-2019 混凝土物理力学性能试验方法标准(中英文版) Standard for test method of physical and mechanical properties on concrete |
|||
GB/T 3903.41-2019 鞋类 帮面和衬里试验方法 耐折性能(中英文版) Footwear—Test methods for uppers and lining—Flex resistance |
|||
GB/T 10066.2-2019 电热和电磁处理装置的试验方法 第2部分:直接电弧炉(中英文版) Test methods for electroheating and electromagnetic processing installations—Part 2: Direct arc furnaces |
|||
GB/T 10066.1-2019 电热和电磁处理装置的试验方法 第1部分:通用部分(中英文版) Test methods for electroheating and electromagnetic processing installations—Part 1: General |
|||
GB/T 37825-2019 建筑玻璃均布静载模拟风压试验方法(中英文版) Test method for simulating wind pressure resistance of building glass under the uniform static loads |
|||
GB/T 3903.7-2019 鞋类 整鞋试验方法 老化处理(中英文版) Footwear—Test methods for whole shoe—Ageing conditioning |
|||
GB/T 37566-2019 圆钢超声检测方法(中英文版) Method of ultrasonic testing for round steel |
|||
GB/T 3903.42-2019 鞋类 帮面、衬里和内垫试验方法(中英文版) Footwear—Test methods for uppers,lining and insocks—Colour migration |
|||
GB/T 12442-2019 石英玻璃中羟基含量检验方法(中英文版) Test method for the hydroxyl groups content of silica glass |
|||
GB/T 3903.39-2019 鞋类 帮面试验方法 层间剥离强度(中英文版) Footwear—Test methods for uppers—Delamination resistance |
|||
GB/T 3903.33-2019 鞋类 内底和内垫试验方法 吸水率和解吸率(中英文版) Footwear—Test methods for insoles and insocks—Water absorption and desorption |
|||
GB/T 38440-2019 铸铁楔压强度试验方法(中英文版) Test method for penetration strength of cast iron |
|||
GB/T 37619-2019 金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法(中英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes |
|||
GB/T 37617-2019 纳滤膜表面Zeta电位测试方法 流动电位法(中英文版) Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement |
|||
GB/T 37616-2019 铝合金挤压型材轴向力控制疲劳试验方法(中英文版) Aluminium alloys extruded profiles-axial force controlled fatigue testing method |
|||
GB/T 3903.43-2019 鞋类 帮面、衬里和内垫试验方法 缝合强度(中英文版) Footwear—Test methods for uppers,lining and insocks—Seam strength |
|||
GB/T 37780-2019 玻璃材料弹性模量、剪切模量和泊松比试验方法(中英文版) Test method for elastic modulus,shear modulus and Poisson’s ratio of glass |
|||
GB/T 37849-2019 液相色谱飞行时间质谱联用仪性能测定方法(中英文版) Method of performance testing for liquid chromatography tandem time of flight mass spectrometry |
|||
GB/T 37841-2019 塑料薄膜和薄片耐穿刺性测试方法(中英文版) Test method for puncture resistance of plastic film and sheeting |
|||
GB/T 37831-2019 航空玻璃光学性能试验方法(中英文版) Test methods for optical properties for aircraft glass |
|||
GB/T 37826-2019 航空电加温玻璃电学性能试验方法(中英文版) Test methods for electrically properties for electrically heated aircraft glass |
|||
GB/T 37631-2019 化学纤维 热分解温度试验方法(中英文版) Man-made fiber—Test method for thermal decomposition temperature |
|||
GB/T 37789-2019 钢结构十字接头试验方法(中英文版) Test methods for cruciform joints of steel structures |
|||
GB/T 37788-2019 超薄玻璃弹性模量试验方法(中英文版) Test method for elastic moduli of ultra-thin glass |
|||
GB/T 37784-2019 中空玻璃结构安全隐患现场检测方法(中英文版) In-situ test method for detection of structural risk of the insulating glass |
|||
GB/T 13477.14-2019 建筑密封材料试验方法 第14部分:浸水及拉伸-压缩循环后粘结性的测定(中英文版) Test method for building sealants-Part 14:Determination of resistance to prolonged exposure to water |
|||
GB/T 25217.7-2019 冲击地压测定、监测与防治方法 第7部分:采动应力监测方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 7: Monitoring method of mining-induced stress |
|||
GB/T 25217.12-2019 冲击地压测定、监测与防治方法 第12部分:开采保护层防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 12: Prevention method of protective seam mining |
|||
GB/T 25217.11-2019 冲击地压测定、监测与防治方法 第11部分:煤层卸压爆破防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 11: Prevention method of destress blasting in coal seam |
|||
GB/T 25217.10-2019 冲击地压测定、监测与防治方法 第10部分:煤层钻孔卸压防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 10: Prevention method of drillhole destressing on coal-seam |
|||
GB/T 21838.1-2019 金属材料 硬度和材料参数的仪器化压入试验 第1部分:试验方法(中英文版) Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method |
|||
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法(切口试验)(中英文版) Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) |
|||
GB/T 16641-2019 鞋类 整鞋试验方法 动态防水性能(中英文版) Footwear—Test methods for whole shoe—Dynamic waterproofness |
|||
GB/T 37564-2019 浸胶帘线蠕变性能试验方法(中英文版) Test method of creep performance for dipped cords |
|||
GB/T 32065.15-2019 海洋仪器环境试验方法 第15部分:水压试验(中英文版) Environmental test methods for oceanographic instruments—Part 9:Mould test |
|||
GB/T 37477-2019 救援装备水面搭载与吊放仿真试验方法(中英文版) Simulation test methods of surface support,launch and recovery for rescue system |
|||
GB/T 37417-2019 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果(中英文版) Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements,methods of testing and required test results |
|||
GB/T 37399-2019 高压岸电试验方法(中英文版) Test methods for high voltage shore connection system |
|||
GB/T 37365-2019 压铸单元 性能检测方法(中英文版) Die casting unit—Performance testing method |
|||
GB/T 37322-2019 汽油清净性评价 汽油机进气阀沉积物模拟试验法(中英文版) Test method for evaluating gasoline cleanliness—Simulation test of intake valve deposit (IVD) of gasoline engine |
|||
GB/T 37635-2019 纺织品 弹性织带耐疲劳外观变化试验方法(中英文版) Textiles—Test method for fatigue resistance on visial change of elastic straps |
|||
GB/T 37160-2019 重质馏分油、渣油及原油中痕量金属元素的测定 电感耦合等离子体发射光谱法(中英文版) Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry(ICP-OES) |
|||
GB/T 19951-2019 道路车辆 电气/电子部件对静电放电抗扰性的试验方法(中英文版) Road vehicles—Disturbances test methods for electrical/electronic component from electrostatic discharge |
|||
GB/T 32065.14-2019 海洋仪器环境试验方法 第14部分:振动试验(中英文版) Environmental test methods for oceanographic instruments—Part 15:Hydrostatic pressure test |
|||
GB/T 32065.9-2019 海洋仪器环境试验方法 第9部分:长霉试验(中英文版) Environmental test methods for oceanographic instruments—Part 14 : Vibration test |
|||
GB/T 13277.5-2019 压缩空气 第5部分:油蒸气及有机溶剂测量方法(中英文版) Compressed air—Part 5: Test methods for oil vapour and organic solvent content |
|||
GB/T 3142-2019 润滑剂承载能力的测定 四球法(中英文版) Standard test method for determination of load-carrying capacity of lubricants—Four-ball method |
|||
GB/T 37889-2019 橡胶或塑料涂覆织物 致液体污染性测试方法(中英文版) Rubber-or plastics-coated fabrics—Test method for liquid contamination |
|||
GB/T 38316-2019 有机过氧化物和自反应物质作功能力的试验方法(中英文版) Test method of explosive power for organic peroxides and self-reactive substances |
|||
GB/T 37288-2019 边境(界)地区无线电电磁环境测试要求和测试方法(中英文版) Testing requirement and methods for radio electromagnetic environment in border areas |
|||
GB/T 37355-2019 活性炭脱汞催化剂脱汞率试验方法(中英文版) Test method of mercury removal rate for activated carbon mercury removal catalyst |
|||
GB/T 13477.13-2019 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定(中英文版) Test method for building sealants-Part 13:Determination of adhesion/cohesion properties at variable temperatures |
|||
GB/T 12688.5-2019 工业用苯乙烯试验方法 第5部分:总醛含量的测定 滴定法(中英文版) Test method of styrene for industrial use—Part 5:Determination of the content of total aldehydes—Titrimetric method |
|||
GB/T 12688.1-2019 工业用苯乙烯试验方法 第1部分:纯度及烃类杂质的测定 气相色谱法(中英文版) Test method of styrene for industrial use—Part 1:Determination of purity and hydrocarbon impurities—Gas chromatography |
|||
GB/T 8721-2019 炭素材料抗拉强度测定方法(中英文版) The test method for tensile strength of carbon materials |
|||
GB/T 1431-2019 炭素材料耐压强度测定方法(中英文版) The test method for compressive strength of carbon materials |
|||
GB/T 37385-2019 硅中氯离子含量的测定 离子色谱法(中英文版) Test method for chloride content of silicon—Ion chromatography method |
|||
GB 15742-2019 机动车用喇叭的性能要求及试验方法(中英文版) Performance requirements and test methods of horn for motor vehicles |
|||
GB/T 37359-2019 钯炭催化剂活性试验方法(中英文版) Test method of activity for palladium carbon catalysts |
|||
GB/T 11026.10-2019 电气绝缘材料 耐热性 第10部分:利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则(中英文版) Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy |
|||
GB/T 37745-2019 木结构剪力墙静载和低周反复水平加载试验方法(中英文版) Static and cyclic lateral load test methods for timber structure shear walls |
|||
GB/T 37632-2019 化学纤维 二氧化钛含量试验方法(中英文版) Man-made fiber—Test method for titanium dioxide content |
|||
GB/T 24113.2-2019 机械电气设备 塑料机械计算机控制系统 第2部分:试验与评价方法(中英文版) Electrical equipment of machines—Computer control systems for plastics machinery—Part 2:Test and evaluation method |
|||
GB/T 21655.2-2019 纺织品 吸湿速干性的评定 第2部分: 动态水分传递法(中英文版) Textiles—Evaluation of absorption and quick-drying—Part 2:Method for moisture management tests |
|||
GB/T 20114-2019 普通电源或整流电源供电直流电机的特殊试验方法(中英文版) Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
|||
GB/T 21839-2019 预应力混凝土用钢材试验方法(中英文版) Test methods of steel for prestressing concrete |
|||
GB/T 37360-2019 铑炭催化剂活性试验方法(中英文版) Test method of activity for rhodium carbon catalysts |
|||
GB/T 22799-2019 毛巾产品吸水性测试方法(中英文版) Test method for absorption of towel products |
|||
GB/T 15227-2019 建筑幕墙气密、水密、抗风压性能检测方法(中英文版) Test method of air permeability, watertightness, wind load resistance performance for curtain walls |
|||
GB/T 8722-2019 炭素材料导热系数测定方法(中英文版) Test method for thermal conductivity of carbon materials |
|||
GB/T 7106-2019 建筑外门窗气密、水密、抗风压性能检测方法(中英文版) Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors |
|||
GB/T 38430-2019 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法(中英文版) Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
|||
GB/T 38426-2019 睡袋的热阻和使用温度的测定方法(中英文版) Test method for thermal resistance and use temperature of sleeping bags |
|||
GB/T 38388-2019 建筑光伏幕墙采光顶检测方法(中英文版) Test method of solar PV system for curtain wall and skylight of building |
|||
GB/T 38265.1-2019 软钎剂试验方法 第1部分:不挥发物质含量的测定 重量法(中英文版) Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method |
|||
GB/T 38265.10-2019 软钎剂试验方法 第10部分:软钎剂润湿性能 铺展试验方法(中英文版) Test methods for soft soldering fluxes—Part 10:Flux efficacy test—Solder spread method |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 22798-2019 毛巾产品脱毛测试方法(中英文版) Test method for fiber shedding of towel products |
|||
GB/T 10230.1-2019 分接开关 第1部分:性能要求和试验方法(中英文版) Tap-changers—Part 1:Performance requirements and test methods |
|||
GB/T 38338-2019 炭素材料断裂韧性测定方法(中英文版) Test method for fracture toughness of carbon materials |
|||
GB/T 38298-2019 固体化学品自动点火温度的试验方法(中英文版) Test method of auto-ignition temperature for solid chemicals |
|||
GB/T 38302-2019 防护服装 热防护性能测试方法(中英文版) Protective clothing—Thermal protective performance test method |
|||
GB/T 38338-2019 炭素材料断裂韧性测定方法(中英文版) Test method for fracture toughness of carbon materials |
|||
GB/T 38265.16-2019 软钎剂试验方法 第16部分:软钎剂润湿性能 润湿平衡法(中英文版) Test methods for soft soldering fluxes—Part 16:Flux efficacy test—Wetting balance method |
|||
GB/T 38256-2019 多光路光轴平行性测试方法(中英文版) Test method for optical axis parallelism of multiple optical paths |
|||
GB/T 38265.2-2019 软钎剂试验方法 第2部分:不挥发物质含量的测定 沸点法(中英文版) Test methods for soft soldering fluxes—Part 2: Determination of non-volatile matter—Ebulliometric method |
|||
GB/T 38298-2019 固体化学品自动点火温度的试验方法(中英文版) Test method of auto-ignition temperature for solid chemicals |
|||
GB/T 38302-2019 防护服装 热防护性能测试方法(中英文版) Protective clothing—Thermal protective performance test method |
|||
GB/T 38316-2019 有机过氧化物和自反应物质作功能力的试验方法(中英文版) Test method of explosive power for organic peroxides and self-reactive substances |
|||
GB/T 37890-2019 橡胶或塑料涂覆织物 芯吸性能测试方法(中英文版) Rubber-or plastics-coated fabrics—Test method for wicking of the cloth |
|||
GB/T 38265.1-2019 软钎剂试验方法 第1部分:不挥发物质含量的测定 重量法(中英文版) Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method |
|||
GB/T 18802.351-2019 低压电涌保护器元件 第351部分:电信和信号网络的电涌隔离变压器(SIT)的性能要求和试验方法(中英文版) Components for low-voltage surge protective devices-Part 351:Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
|||
GB/T 38258-2019 信息技术 虚拟现实应用软件基本要求和测试方法(中英文版) Information technology—Virtual reality application software basic requirement and test method |
|||
GB/T 23711.1-2019 塑料衬里压力容器试验方法 第1部分:电火花试验(中英文版) Test method for pressure vessels lined with plastics—Part 1:Spark testing |
|||
GB/T 28043-2019 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparison |
|||
GB/T 23711.8-2019 塑料衬里压力容器试验方法 第8部分:耐高电阻试验(中英文版) Test method for pressure vessels lined with plastics—Part 8:High-resistance testing |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 22079-2019 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则(中英文版) HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria |
|||
GB/T 38264-2019 建筑幕墙耐撞击性能分级及检测方法(中英文版) Classification and test method of resistance against impact for curtain wall |
|||
GB/T 37951-2019 微通道板试验方法(中英文版) Test methods for microchannel plate |
|||
GB/T 1431-2019 炭素材料耐压强度测定方法(中英文版) The test method for compressive strength of carbon materials |
|||
GB/T 38019-2019 工业用过滤布 粉尘过滤性能测试方法(中英文版) Industrial filter fabrics—Test method for dust filtration performance |
|||
GB/T 38018-2019 鞋类 鞋底试验方法 抗疲劳性能(中英文版) Footwear—Test method for soles—Fatigue resistance |
|||
GB/T 38013-2019 鞋类 鞋带试验方法 抗松脱性能(中英文版) Footwear—Test method for shoelace—Knot slippage property |
|||
GB/T 38012-2019 鞋类 整鞋试验方法 缓震性能(中英文版) Footwear—Test methods for whole shoe—Impact shock attenuating property |
|||
GB/T 38007-2019 桑蚕天然彩色丝鉴别试验方法(中英文版) Test method for identification of natural colored silk of silkworm(Bombyx mori) |
|||
GB 24545-2019 车辆车速限制系统技术要求及试验方法(中英文版) Requirements and test methods of speed limitation system for motor vehicles |
|||
GB/T 37977.23-2019 静电学 第2-3部分:防静电固体平面材料电阻和电阻率的测试方法(中英文版) Electrostatics—Part 2-3:Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation |
|||
GB/T 38011-2019 鞋类 整鞋试验方法 帮带拔出力(中英文版) Footwear—Test methods for whole shoe—Pull-out force of upper bands |
|||
GB/T 37949-2019 有机发光二极管显示器用有机小分子发光材料纯度测定 高效液相色谱法(中英文版) Purity test method of small molecule materials applied in organic light emitting diode display (OLED)—High performance liquid chromatography (HPLC) |
|||
GB/T 38264-2019 建筑幕墙耐撞击性能分级及检测方法(中英文版) Classification and test method of resistance against impact for curtain wall |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 37946-2019 有机发光二极管显示器用材料热稳定性的测试方法(中英文版) Test method of thermal stability of materials for organic light emitting diode display (OLED) |
|||
GB/T 37945-2019 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法(中英文版) Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC) |
|||
GB/T 37929-2019 无损检测仪器 X射线管寿命试验方法(中英文版) Non-destructive testing instruments—Testing methods for life of X-ray tubes |
|||
GB/T 37900-2019 超薄玻璃硬度和断裂韧性试验方法 小负荷维氏硬度压痕法(中英文版) Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method |
|||
GB/T 37977.32-2019 静电学 第3-2部分:静电效应的模拟方法 机器模型(MM)的静电放电试验波形(中英文版) Electrostatics—Part 3-2:Methods for simulation of electrostatic effects—Machine model(MM)electrostatic discharge test waveform |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 38258-2019 信息技术 虚拟现实应用软件基本要求和测试方法(中英文版) Information technology—Virtual reality application software basic requirement and test method |
|||
GB/T 38256-2019 多光路光轴平行性测试方法(中英文版) Test method for optical axis parallelism of multiple optical paths |
|||
GB/T 28043-2019 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparison |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 37983-2019 晶体材料X射线衍射仪旋转定向测试方法(中英文版) Testing methods of X-ray diffraction for determining the orientation of crystal materials by rotation |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
找到:1058條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 |