中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 15548-2008 往复式内燃机驱动的三相同步发电机通用技术条件(中英文版) General specification for three-phase synchronous generators driven by reciprocating internal combustion engine |
|||
GB/T 22120-2008 企业信用数据项规范(中英文版) The data item specification for enterprise credit |
|||
GB/T 14511-2008 地图印刷规范(中英文版) Specifications for printing of maps |
|||
GB/T 14477-2008 海图印刷规范(中英文版) Printing specifications for charts |
|||
GB/T 17200-2008 橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范(中英文版) Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) |
|||
GB/T 14598.300-2008 微机变压器保护装置通用技术要求(中英文版) General specification for microcomputer-based transformer protection equipment |
|||
GB/T 10077-2008 锂原电池分类、型号命名及基本特性(中英文版) Classification, designation nomenclature and basic specifications for lithium primary batteries |
|||
GB/T 21968-2008 YBZS系列起重用隔爆型双速三相异步电动机技术条件(中英文版) Technical specification for YBZS range of flame-proof double-speed three-phase induction motors for crane application |
|||
GB/T 21967-2008 YBZE、YBZSE系列起重用隔爆型电磁制动三相异步电动机技术条件(中英文版) YBZE、YBZSE Range three-phase induction motors for crane application flameproof electromagnetic braking technical specifications |
|||
GB/T 11880-2008 模锻锤和大型机械锻压机用模块技术条件(中英文版) Specification of large die-blocks used for die-forging hammer and mechanical forging press |
|||
GB/T 21741-2008 住宅小区安全防范系统通用技术要求(中英文版) General specifications of security & protection system for residential area |
|||
GB/T 15972.10-2008 光纤试验方法规范 第10部分:测量方法和试验程序 总则(中英文版) Specifications for optical fibre test methods - Part 10: Measurement methods and test procedures - General and guidance |
|||
GB/T 4930-2008 微束分析 电子探针分析 标准样品技术条件导则(中英文版) Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs) |
|||
GB/T 15972.20-2008 光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版) Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry |
|||
GB/T 15972.50-2008 光纤试验方法规范 第50部分:环境性能的测量方法和试验程序 恒定湿热(中英文版) Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) |
|||
GB/T 15972.30-2008 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版) Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test |
|||
GB/T 15972.40-2008 光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减(中英文版) Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation |
|||
GB/T 18838.4-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸(中英文版) Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot |
|||
GB/T 18838.3-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂(中英文版) Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit |
|||
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义(中英文版) Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|||
GB/T 19867.3-2008 电子束焊接工艺规程(中英文版) Welding procedure specification for electron beam welding |
|||
GB/T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版) Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
|||
GB/T 15972.32-2008 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability |
|||
GB/T 15972.31-2008 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength |
|||
GB/T 15972.22-2008 光纤试验方法规范 第22部分:尺寸参数的测量方法和试验程序 长度(中英文版) Specifications for optical fibre test methods - Part 22: Measurement methods and test procedures for dimensions - Length measurement |
|||
GB/T 15972.21-2008 光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数(中英文版) Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry |
|||
GB/T 17472-2008 微电子技术用贵金属浆料规范(中英文版) Specification for pastes of precious metal used for microelectronics |
|||
GB/T 19867.4-2008 激光焊接工艺规程(中英文版) Welding procedure specification for laser beam welding |
|||
GB/T 19867.2-2008 气焊焊接工艺规程(中英文版) Welding procedure specification for gas welding |
|||
GB/T 15972.51-2008 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热(中英文版) Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental characteristics - Dry heat |
|||
GB/T 15972.34-2008 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲(中英文版) Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical characteristics - Fibre curl |
|||
GB/T 19867.5-2008 电阻焊焊接工艺规程(中英文版) Welding procedure specification for resistance welding |
|||
GB/T 15972.42-2008 光纤试验方法规范 第42部分:传输特性和光学特性的测量方法和试验程序 波长色散(中英文版) Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion |
|||
GB/T 15972.43-2008 光纤试验方法规范 第43部分:传输特性和光学特性的测量方法和试验程序 数值孔径(中英文版) Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture |
|||
GB/T 15972.44-2008 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长(中英文版) Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength |
|||
GB/T 15972.45-2008 光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序 模场直径(中英文版) Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter |
|||
GB/T 15972.46-2008 光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化(中英文版) Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance |
|||
GB/T 21547.1-2008 VME总线对仪器的扩展 第1部分: TCP/IP仪器协议规范(中英文版) VME bus Extensions for instrumentation - Part 1: TCP/IP Instrument protocol specification |
|||
GB/T 15972.49-2008 光纤试验方法规范 第49部分:传输特性和光学特性的测量方法和试验程序-微分模时延(中英文版) Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay |
|||
GB/T 15972.53-2008 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水(中英文版) Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water immersion |
|||
GB/T 15972.52-2008 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环(中英文版) Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature |
|||
GB/T 15972.47-2008 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss |
|||
GB/T 15972.41-2008 光纤试验方法规范 第41部分:传输特性和光学特性的测量方法和试验程序 带宽(中英文版) Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth |
|||
GB/T 15972.54-2008 光纤试验方法规范 第54部分:环境性能的测量方法和试验程序 伽玛辐照(中英文版) Specifications for optical fibre test methods - Part 54: Measurement methods and test procedures for environmental characteristics - Gamma irradiation |
|||
GB/T 1182-2008 产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注(中英文版) Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out |
|||
GB/T 21448-2008 埋地钢质管道阴极保护技术规范(中英文版) Specification of cathodic protection for underground steel pipelines |
|||
GB/T 21367-2008 化工企业能源计量器具配备和管理要求(中英文版) Specification for equipping and managing of the measuring instrument of energy in chemical enterprise |
|||
GB/T 21291-2007 鱼糜加工机械安全卫生技术条件(中英文版) Technical specifications of safety and sanitation for surimi processing machinery |
|||
GB/T 15966-2007 水文仪器基本参数及通用技术条件(中英文版) Primary parameter and general specification for hydrologic instrument |
|||
GB/T 1186-2007 压缩空气用织物增强橡胶软管(中英文版) Rubber hoses,textile-reinforced,for compressed air-Specification |
|||
GB 17378.2-2007 海洋监测规范 第2部分: 数据处理与分析质量控制(中英文版) The specification for marine monitoring - Part 2:Data processing and quality control of analysis |
|||
GB/T 21099.2-2007 过程控制用功能块 第2部分:功能块概念及电子设备描述语言的规范(中英文版) Function blocks for process control - Part 2:Specification of FB concept and electronic device description language |
|||
GB/T 12184-2007 信息处理 磁墨字符识别 印制规范(中英文版) Information processing - Magnetic ink character recognition - Print specifications |
|||
GB/T 21093-2007 高压汞灯 性能要求(中英文版) High-pressure mercury vapour lamps - Performance specifications |
|||
GB/Z 6113.403-2007 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分:不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3:Uncertainties,statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced |
|||
GB/T 19668.2-2007 信息化工程监理规范 第2部分:通用布缆系统工程监理规范(中英文版) Information system project surveillance specification - Part 2: Generic cabling system project surveillance specification |
|||
GB/T 19668.3-2007 信息化工程监理规范 第3部分:电子设备机房系统工程监理规范(中英文版) Information system project surveillance specification - Part 3: Electronic equipment room system project surveillance specification |
|||
GB/T 19668.6-2007 信息化工程监理规范 第6部分: 信息化工程安全监理规范(中英文版) Information system project surveillance specification - Part 6: Information system project security surveillance specification |
|||
GB/T 19668.4-2007 信息化工程监理规范 第4部分:计算机网络系统工程监理规范(中英文版) Information system project surveillance specification - Part 4: Computer network system project surveillance specification |
|||
GB/T 19668.5-2007 信息化工程监理规范 第5部分: 软件工程监理规范(中英文版) Information system project surveillance specification - Part 5: Software project surveillance specification |
|||
GB/T 13342-2007 船用往复式液压缸通用技术条件(中英文版) Specification for marine reciprocating hydraulic cylinder |
|||
GB/T 21026-2007 中文办公软件应用编程接口规范(中英文版) Specification for Chinese office software application programming interface |
|||
GB/T 15157.14-2007 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范(中英文版) Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
|||
GB 14773-2007 涂装作业安全规程 静电喷枪及其辅助装置安全技术条件(中英文版) Safety code for painting - Safety specification for electrostatic spray guns and associated apparatus |
|||
GB/T 18802.321-2007 低压电涌保护器元件 第321部分:雪崩击穿二极管(ABD)规范(中英文版) Components for low-voltage surge protective devices - Part 321: Specifications for avalanche breakdown diode(ABD) |
|||
GB/T 15406-2007 岩土工程仪器基本参数及通用技术条件(中英文版) Primary parameter and general specification for geotechnical engineering instrument |
|||
GB 4584-2007 压力机用光电保护装置技术条件(中英文版) Specification of active opto-electronic protective devices for presses |
|||
GB/T 18015.32-2007 数字通信用对绞或星绞多芯对称电缆 第32部分:工作区布线电缆 能力认可 分规范(中英文版) Multicore and symmetrical pair/quad cables for digital communications - Part 32: Work area wiring - Capability Approval - Sectional specification |
|||
GB/T 18015.22-2007 数字通信用对绞或星绞多芯对称电缆 第22部分:水平层布线电缆 能力认可 分规范(中英文版) Multicore and symmetrical pair/quad cables for digital communications - Part 22: Horizontal floor wiring - Capability Approval - Sectional specification |
|||
GB/T 18015.11-2007 数字通信用对绞或星绞多芯对称电缆 第11部分:能力认可 总规范(中英文版) Multicore and symmetrical pair/quad cables for digital communications - Part 11: Capability Approval - Generic specification |
|||
GB/T 18015.42-2007 数字通信用对绞或星绞多芯对称电缆 第42部分:垂直布线电缆 能力认可 分规范(中英文版) Multicore and symmetrical pair/quad cables for digital communications - Part 42:Riser cables - Capability approval-Sectional specification |
|||
GB/T 18802.311-2007 低压电涌保护器元件 第311部分:气体放电管(GDT)规范(中英文版) Components for low-voltage surge protective devices - Part 311: Specification for gas discharge tubes(GDT) |
|||
GB/T 16764-2006 配合饲料企业卫生规范(中英文版) Hygienic specification for formula feed enterprises |
|||
GB/T 17574.9-2006 半导体器件 集成电路 第2-9部分:数字集成电路 紫外光擦除电可编程MOS只读存储器空白详细规范(中英文版) Semiconductor devices - Integrated circuits - Part 2-9: Digital integrated circuits - Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories |
|||
GB/T 17574.11-2006 半导体器件 集成电路 第2-11部分:数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范(中英文版) Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory |
|||
GB/T 20626.2-2006 特殊环境条件 高原电工电子产品 第2部分:选型和检验规范(中英文版) Specific environmental condition - Electrical and electronic products for plateau - Part 2: Selective types and testing specification |
|||
GB/Z 20541.2-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型10:PROFINET规范 第2部分:应用层协议规范(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems Type 10:PROFINET Specification - Part 2: Application Layer protocol specification |
|||
GB/Z 20541.1-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型10:PROFINET规范 第1部分:应用层服务定义(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems Type 10:PROFINET Specification - Part 1: Application layer service definition |
|||
GB/T 20540.6-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第6部分:应用层协议规范(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 6: Application layer protocol specification |
|||
GB/T 20540.5-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第5部分:应用层服务定义(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 5: Application layer service definition |
|||
GB/T 20540.4-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第4部分:数据链路层协议规范(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 4: Data link layer protocol specification |
|||
GB/T 20540.3-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第3部分:数据链路层服务定义(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification -Part 3: Data link layer service definition |
|||
GB/T 20540.2-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第2部分:物理层规范和服务定义(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 2: Physical layer specification and service definition |
|||
GB/T 20540.1-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第1部分:概述和导则(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 1: Overview and guidance |
|||
GB/T 20575-2006 鲜、冻肉生产良好操作规范(中英文版) The specification of good manufacture practice for fresh and frozen meat processing |
|||
GB/T 19363.2-2006 翻译服务规范 第2部分 口译(中英文版) Specification for translation service―Part 2:Interpretation |
|||
GB/T 13154-2006 电视用彩色电影拷贝和幻灯片的密度规范(中英文版) Cinematography - Colour motion-picture prints and slides for television-density specifications |
|||
GB/T 20519-2006 信息安全技术 公钥基础设施 特定权限管理中心技术规范(中英文版) Information security technology - Public key infrastructures - Privilege Management Center technical specification |
|||
GB 20424-2006 重金属精矿产品中有害元素的限量规范(中英文版) The specification for limit on harmful element content of the heavy metal concentrates products |
|||
GB/T 16857.6-2006 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定(中英文版) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features |
|||
GB/T 16857.2-2006 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量尺寸的坐标测量机(中英文版) Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size |
|||
GB/T 20420-2006 润滑剂、工业用油和相关产品(L类)-E组(内燃机油)-二冲程汽油发动机油(EGB、EGC和EGD)(中英文版) Lubricants, industrial oils and related products (class L)-Family E (internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
|||
GB/Z 6113.3-2006 无线电骚扰和抗扰度测量设备和测量方法规范 第3部分 无线电骚扰和抗扰度测量 技术报告(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part3: CISPR technical report |
|||
GB/T 20268-2006 车载导航地理数据采集处理技术规程(中英文版) Specification for collecting and processing in-car navigable geographic data |
|||
GB/T 10591-2006 高温/ 低气压试验箱技术条件(中英文版) Specifications for high temperature/low air pressure testing chambers |
|||
GB/T 10590-2006 高低温/ 低气压试验箱技术条件(中英文版) Specifications for high and low temperature/low air pressure testing chambers |
|||
GB/T 20164-2006 传染病暴发流行期间疫区邮件及处理系统预防控制规范(中英文版) Prevention and control specifications for mail and mail handling systems in the area of when epidemics breakout |
|||
GB 20262-2006 焊接、切割及类似工艺用气瓶减压器安全规范(中英文版) Safety specifications of regulators for welding, cutting and the similar processes |
|||
GB 14866-2006 个人用眼护具技术要求(中英文版) The specifications for personal eye-protectors |
|||
GB/T 20203-2006 农田低压管道输水灌溉工程技术规范(中英文版) Technical specification for irrigation projects with low pressure pipe conveyance |
|||
GB/T 2546.1-2006 塑料 聚丙烯(PP〕模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics―Polypropylene(PP) moulding and extrusion materials―Part 1: Designation system and basis for specifications |
|||
GB/T 20433-2006 摄影 加工用化学品 硫代硫酸铵溶液规格(中英文版) Photography―Processing chemicals―Specifications for ammonium thiosulfate solution |
|||
GB/T 19867.1-2005 电弧焊焊接工艺规程(中英文版) Welding procedure specification for arc welding |
|||
GB/T 19866-2005 焊接工艺规程及评定的一般原则(中英文版) Specification and qualification of welding procedures for metallic materials-General rules |
|||
GB/T 19828-2005 食盐定点生产企业质量管理技术规范(中英文版) Technology specification of management quality for edible salt authorized enterprises |
|||
GB/T 2940-2005 柴油机用喷油泵、调速器、喷油器弹簧技术条件(中英文版) Technical specifications of springs for fuel pump,governor and injecter of diesel engines |
|||
GB/T 19774-2005 水电解制氢系统技术要求(中英文版) Specification of water electrolyte system for producing hydrogen |
|||
GB/T 514-2005 石油产品试验用玻璃液体温度计技术条件(中英文版) Specification for liquid-in-glass thermometers for testing of petroleum products |
|||
GB/T 19765-2005 产品几何量技术规范(GPS)--产品几何量技术规范和检验的标准参考温度(中英文版) Geometrical Product Specifications(GPS)-Standard reference temperature for geometrical product specification and verification |
|||
GB/T 19667.1-2005 基于XML的电子公文格式规范 第1部分:总则(中英文版) Specification for the structure of electronic official document based on XML--Part 1:General principles |
|||
GB/T 7235-2004 产品几何量技术规范(GPS) 评定圆度误差的方法 半径变化量测量(中英文版) Geometrical Product Specifications(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius |
|||
GB/T 16857.5-2004 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机(中英文版) Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems |
|||
GB/T 19571-2004 海洋自然保护区管理技术规范(中英文版) Technical specification for the management of marine protected areas |
|||
GB/T 9843-2004 尿素高压洗涤器技术条件(中英文版) Specifications for urea high pressure scrubber |
|||
GB/T 10476-2004 尿素高压冷凝器技术条件(中英文版) Specifications for urea high pressure condenser |
|||
GB/T 19526-2004 羊寄生虫病防治技术规范(中英文版) Technical specifications for prevention and cure of sheep parasitosis |
|||
GB/T 19487-2004 电子政务业务流程设计方法 通用规范(中英文版) Business process design method general specification for electronic government |
|||
GB 19458-2004 危险货物危险特性检验安全规范 通则(中英文版) Safety code for inspection of hazardous properties for dangerous goods--General specifications |
|||
GB/T 19446-2004 异型接点带通用规范(中英文版) Specification for electrical contact profiles |
|||
GB/T 19247.3-2003 印制板组装 第3部分:分规范 通孔安装焊接组装的要求(中英文版) Printed board assemblies--Part 3:Sectional specification--Requirements for through-hole mount soldered assemblies |
|||
GB/T 19247.4-2003 印制板组装 第4部分:分规范 引出端焊接组装的要求(中英文版) Printed board assemblies--Part 4:Sectional specification--Requirements for terminal soldered assemblies |
|||
GB 19335-2003 一次性使用血路产品 通用技术条件(中英文版) Blood flow products for single use--General specification |
|||
GB/T 19294-2003 航空摄影技术设计规范(中英文版) Specification for technological project of aerialphotography |
|||
GB/T 19290.2-2003 发展中的电子设备构体机械结构模数序列 第2部分: 分规范 25 mm设备构体的接口协调尺寸(中英文版) Modular order for the development of mechanical structures for electronic equipment practices--Part 2: Sectional specification--Interface co-ordination dimensions for the 25mm equipment practice |
|||
GB/T 19247.2-2003 印制板组装 第2部分: 分规范 表面安装焊接组装的要求(中英文版) Printed board assemblies--Part 2: Sectional specification--Requirements for surface mount solderedassemblies |
|||
GB/T 19247.1-2003 印制板组装 第1部分:通用规范 采用表面安装和相关组装技术的电子和电气焊接组装的要求(中英文版) Printed board assemblies--Part 1: Generic specification--Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
|||
GB/T 18237.4-2003 信息技术 开放系统互连 通用高层安全 第4部分: 保护传送语法规范(中英文版) Information technology--Open systems interconnection--Generic upper layers security--Part 4: Protecting transfer syntax specification |
|||
GB/T 12472-2003 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值(中英文版) Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness parameters and their values for wooden pieces |
|||
GB/T 16857.4-2003 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机(中英文版) Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode |
|||
GB/T 15157.7-2002 频率低于3 MHz的印制板连接器 第7部分:有质量评定的具有通用插合特性的8位固定和自由连接器详细规范(中英文版) Connectors for frequencies below 3MHz for use with printed boards--Part 7:Detail specification for connectors,8-way,including fixed and free connectors with common mating features,with assessed quality |
|||
GB/T 18909-2002 按能力批准评定质量的电子设备用高频电感器和中频变压器分规范(中英文版) Sectional specification for high-frequency inductors and intermediate frequency transformers for use in electronic equipment for capability approval |
|||
GB/T 6589-2002 半导体器件 分立器件 第3-2部分:信号(包括开关)和调整二极管 电压调整二极管和电压基准二极管(不包括温度补偿精密基准二极管) 空白详细规范(中英文版) Semiconductordevices--Discrete devices--Part 3-2:Signal (including switching) and regulator diodes--Blank detail specification for voltage-regulator diodes and voltage-reference diodes (excluding temperature-compensated precision reference diodes) |
|||
GB/T 18917-2002 彩色投影显象管空白详细规范(中英文版) Blank detail specification for the colour projection picture tubes |
|||
GB/T 18838.1-2002 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类(中英文版) Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification |
|||
GB/T 17850.1-2002 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类(中英文版) Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introductionand classification |
|||
GB/T 18806-2002 电阻应变式压力传感器总规范(中英文版) General specification for the resistance strain pressure transducer/sensor |
|||
GB/T 18779.1-2002 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第1部分:按规范检验合格或不合格的判定规则(中英文版) Geometrical product specifications (GPS)--Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications |
|||
GB/T 16857.1-2002 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第1部分:词汇(中英文版) Geometrical product specification(GPS)--Acceptance and reverification tests for coordinate measuring machines--Part 1:Vocabulary |
|||
GB/T 2820.7-2002 往复式内燃机驱动的交流发电机组 第7部分:用于技术条件和设计的技术说明(中英文版) Reciprocating internal combustion engine driven alternating current generating sets--Part 7:Technical declarations for specification and design |
|||
GB/T 18569.1-2001 机械安全 减小由机械排放的危害性物质对健康的风险 第1部分:用于机械制造商的原则和规范(中英文版) Safety of machinery--Reduction of risks to health from hazardous substances emitted by machinery--Part 1:Principles and specifications for machinery manufacturers |
|||
GB/Z 18462-2001 激光加工机械 金属切割的性能规范与标准检查程序(中英文版) Laser processing machines--Performance specifications and benchmarks for cutting of metals |
|||
GB/T 18334-2001 有贯穿连接的挠性多层印制板规范(中英文版) Specification for flexible multilayer printed boards with through conections |
|||
GB/T 18335-2001 有贯穿连接的刚挠多层印制板规范(中英文版) Specification for flex-rigid multilayer printed boards with through connections |
|||
GB/T 4588.12-2000 预制内层层压板规范(半制成多层印制板)(中英文版) Specification for mass laminationpanels (semi-manufactured multilayer printed boards) |
|||
GB/T 18237.3-2000 信息技术 开放系统互连 通用高层安全 第3部分:安全交换服务元素(SESE)协议规范(中英文版) Information technology--Open Systems Interconnection--Generic upper layers security--Part 3:Security Exchange Service Element(SESE) protocol specification |
|||
GB/T 18235.1-2000 信息技术 高性能并行接口 第1部分:机械、电气及信号协议规范(HIPPI-PH)(中英文版) Information technology--High-Performance Parallel Interface--Part 1:Mechanical,electrical and signaling protocol specification (HIPPI-PH) |
|||
GB/T 2926-2000 35mm和16mm电影发行拷贝片头和片尾的技术规格(中英文版) Leaders and run-out trailers for 35mm and 16mm release prints--Specification |
|||
GB/T 17974-2000 台式喷墨打印机通用规范(中英文版) General specification for desktop Ink-Jet printer |
|||
GB/T 17970-2000 信息技术 处理语言 文件式样的语义及规格说明语言(DSSSL)(中英文版) Information technology--Processing languages--Document Style Semantics and Specification Language(DSSSL) |
|||
GB/T 17904.2-1999 ISDN用户-网络接口数据链路层技术规范及一致性测试方法 第2部分:数据链路层协议一致性测试方法(中英文版) ISDN user-network interface data link layer specification and conformance testing method--Part 2:Data link layer protocol conformance testing method |
找到:988條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |