中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 10901-2005 离心机 性能测试方法(中英文版) Methods of Performance testing for centrifuge |
|||
GB/T 6058-2005 纤维缠绕压力容器制备和内压试验方法(中英文版) Test method for preparation and internal pressure testing of filament-wound pressure vessels |
|||
GB/T 5170.13-2005 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test |
|||
GB/T 5170.16-2005 电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test |
|||
GB/T 5170.15-2005 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test |
|||
GB/T 2423.53-2005 电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损(中英文版) Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands |
|||
GB/T 4104-2003 直接法氧化锌白度(颜色)检验方法(中英文版) Leucoscopic method for testing whiteness of zinc oxide made by direct process |
|||
GB/T 10760.2-2003 离网型风力发电机组用发电机 第2部分: 试验方法(中英文版) Generator of off-grid wind turbines generator system--Part 2: Testing method |
|||
GB/T 6461-2002 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级(中英文版) Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests |
|||
GB/T 11711-2002 船用自动雷达标绘仪(ARPA)性能要求、测试方法和要求的测试结果(中英文版) Marine automatic radar plotting aids(ARPA)--Performance requirements,methods of testing and required test results |
|||
GB/T 3385-2001 船用舷窗和矩形窗钢化安全玻璃 非破坏性强度试验 冲压法(中英文版) Shipbuilding and marine structures--Toughened safety glass panes for rectangular windows and side scuttles--Punch method of non-destructive strength testing |
|||
GB/T 18214.1-2000 全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果(中英文版) Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards,methods of testing and required test results |
|||
GB/T 17671-1999 水泥胶砂强度检验方法(ISO法)(中英文版) Method of testing cements--Determinationof strength |
|||
GB/T 16864-1997 低温下晶体透射率的试验方法(中英文版) Method for testing cryogenic transmissivityof crystals |
|||
GB/T 12840-1996 盒式磁带录音机运带机构可靠性要求和试验方法(中英文版) Reliability requirements and testing methods for tape transport mechanism of cassette tape recorders |
|||
GB/T 16667-1996 电焊设备节能监测方法(中英文版) Monitoring and testing method for energy saving of electrical welding installation |
|||
GB/T 16665-1996 空气压缩机组及供气系统节能监测方法(中英文版) Monitoring and testing method for energy saving of air compressor unit and air distribution system |
|||
GB/T 16664-1996 企业供配电系统节能监测方法(中英文版) Monitoring and testing method for energy saving of power supply distribution system of industrial enterprise |
|||
GB/T 13823.17-1996 振动与冲击传感器的校准方法 声灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of acoustic sensitivity |
|||
GB/T 15868-1995 全球海上遇险与安全系统(CMDSS) 船用无线电设备和海上导航设备通用要求测试方法和要求的测试结果(中英文版) Shipborne radio equipment forming part of the (globalmaritime distress and safety system) and marine navigational equipment--General require-ments,methods of testing and required test results |
|||
GB/T 15914-1995 蒸汽加热设备节能监测方法(中英文版) Monitoring and testing method for energy saving of steam heating equipments |
|||
GB/T 15911-1995 工业电热设备节能监测方法(中英文版) Monitoring and testing method for energy saving of electroheat device in industry |
|||
GB/T 13823.15-1995 振动与冲击传感器的校准方法 瞬变温度灵敏度测试法(中英文版) Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity |
|||
GB/T 13823.12-1995 振动与冲击传感器的校准方法 安装在钢块上的无阻尼加速度计共振频率测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Resonance frequencytesting of undamped accelerometers on a steel block |
|||
GB/T 15309-1994 船舶货舱温湿度仪技术要求及试验方法(中英文版) Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel |
|||
GB/T 15319-1994 火焰加热炉节能监测方法(中英文版) Monitoring and testing method for energy savingof flame heating furnace |
|||
GB/T 13823.9-1994 振动与冲击传感器的校准方法 横向冲击灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of transverse shock sensitivity |
|||
GB/T 14903-1994 无机胶粘剂套接扭转剪切强度试验方法(中英文版) Testing method for torsional shear strength of doedl joint by inorganic adhesives |
|||
GB 14861-1993 应用电视设备安全要求及试验方法(中英文版) Safety requirements and testing methodsfor equipments of applied TV |
|||
GB/T 14235.3-1993 熔模铸造模料 灰分测定方法(中英文版) Testing method for ash content of pattern materials in investment casting |
|||
GB/T 14235.2-1993 熔模铸造模料 抗弯强度测定方法(中英文版) Testing method for bending strength of pattern materials in investment casting |
|||
GB/T 14235.4-1993 熔模铸造模料 线收缩率测定方法(中英文版) Testing method for linear contraction of pattern materials in investment casting |
|||
GB/T 14235.5-1993 熔模铸造模料 表面硬度测定方法(中英文版) Testing method for surface hardness of pattern materials in investment casting |
|||
GB/T 14235.7-1993 熔模铸造模料 流动性测定方法(中英文版) Testing method for fluidity of pattern materials in investment casting |
|||
GB/T 14235.8-1993 熔模铸造模料 粘度测定方法(中英文版) Testing method for viscosity of pattern materials in investment casting |
|||
GB/T 14235.9-1993 熔模铸造模料 热稳定性测定方法(中英文版) Testing method for thermal stability ofpattern materials in investment casting |
|||
GB/T 14235.1-1993 熔模铸造模料 熔点测定方法(冷却曲线法)(中英文版) Testing method for melting point of pattern materials in investment casting |
|||
GB/T 14235.6-1993 熔模铸造模料 酸值测定方法(中英文版) Testing method for acid number of pattern materials in investment casting |
|||
GB/T 13823.6-1992 振动与冲击传感器的校准方法 基座应变灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of base strain sensitivity |
|||
GB/T 13823.5-1992 振动与冲击传感器的校准方法 安装力矩灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of mounting torque sensitivity |
|||
GB/T 13823.4-1992 振动与冲击传感器的校准方法 磁灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of magnetic field sensitivity |
|||
GB/T 13301-1991 金属材料电阻应变灵敏系数试验方法(中英文版) Metals--Testing method for sensitivity of electrical resistance strain |
|||
GB/T 12267-1990 船用导航设备通用要求和试验方法(中英文版) Marine navigational equipment--General requirements--Methods of testing and required test results |
|||
GB/T 11177-1989 无机胶粘剂套接压缩剪切强度试验方法(中英文版) Testing method for compressive shear strength of dowel joint by inorganic adhesives |
|||
GB/T 10573-1989 有色金属细丝拉伸试验方法(中英文版) Tensile testing method for fine wire of non-ferrous metals |
|||
GB/T 9391-1988 船用雷达技术要求和使用要求 测试方法和要求的测试结果(中英文版) Shipborne radar,technical and operation requirements--Method of testing and required test results |
|||
GB/T 5887-1986 苎麻纤维长度试验方法(中英文版) Testing method of length of ramie fiber |
|||
GB/T 5886-1986 苎麻单纤维断裂强度试验方法(中英文版) Testing method of single fiber breaking tenacity of ramie |
|||
GB/T 5885-1986 苎麻纤维白度试验方法(中英文版) Testing method of whiteness of ramie fiber |
|||
GB/T 5883-1986 苎麻回潮率、含水率试验方法(中英文版) Testing method of moisture regain and moisture content of ramie fiber |
找到:252條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 |