中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 14235.3-1993
熔模铸造模料 灰分测定方法(中英文版)
Testing method for ash content of pattern materials in investment casting
  GB/T 14235.4-1993
熔模铸造模料 线收缩率测定方法(中英文版)
Testing method for linear contraction of pattern materials in investment casting
  GB/T 14235.5-1993
熔模铸造模料 表面硬度测定方法(中英文版)
Testing method for surface hardness of pattern materials in investment casting
  GB/T 14235.6-1993
熔模铸造模料 酸值测定方法(中英文版)
Testing method for acid number of pattern materials in investment casting
  GB/T 14235.7-1993
熔模铸造模料 流动性测定方法(中英文版)
Testing method for fluidity of pattern materials in investment casting
  GB/T 14235.8-1993
熔模铸造模料 粘度测定方法(中英文版)
Testing method for viscosity of pattern materials in investment casting
  GB/T 14235.9-1993
熔模铸造模料 热稳定性测定方法(中英文版)
Testing method for thermal stability ofpattern materials in investment casting
  GB/T 13823.5-1992
振动与冲击传感器的校准方法 安装力矩灵敏度测试(中英文版)
Methods for the calibration of vibration and shock pick-ups--Testing of mounting torque sensitivity
  GB/T 13823.4-1992
振动与冲击传感器的校准方法 磁灵敏度测试(中英文版)
Methods for the calibration of vibration and shock pick-ups--Testing of magnetic field sensitivity
  GB/T 13823.6-1992
振动与冲击传感器的校准方法 基座应变灵敏度测试(中英文版)
Methods for the calibration of vibration and shock pick-ups--Testing of base strain sensitivity
  GB/T 2361-1992
防锈油脂湿热试验法(中英文版)
Rust preventing oils and greases--Test method of wet heat
  GB/T 13247-1991
铁合金产品粒度的取样和检测方法(中英文版)
Ferroalloys--Sampling and testing methods for determination of grain size
  GB/T 12810-1991
实验室玻璃仪器 玻璃量器的容量校准和使用方法(中英文版)
Laboratory glassware--Volumetric glassware--Methods for use and testing of capacity
  GB/T 2972-1991
镀锌钢丝锌层硫酸铜试验方法(中英文版)
Zinc-coated steel wire--Test method for uniformity of zinc coating on wire by the copper sulphate dip
  GB/T 12639-1990
通信卫星有效载荷性能的在轨测试方法(中英文版)
Methods of in-orbit testing for communication satellite payload performances
  GB/T 12267-1990
船用导航设备通用要求和试验方法(中英文版)
Marine navigational equipment--General requirements--Methods of testing and required test results
  GB/T 12300-1990
功率晶体管安全工作区测试方法(中英文版)
Test methods of safe operating area for power transistors
  GB/T 11548-1989
硬质塑料板材耐冲击性能试验方法 (落锤法)(中英文版)
Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight)
  GB/T 11177-1989
无机胶粘剂套接压缩剪切强度试验方法(中英文版)
Testing method for compressive shear strength of dowel joint by inorganic adhesives
  GB/T 9933-1988
内燃机油性能评定法 (开特皮勒1G2法)(中英文版)
The test method for evaluating the performance of internal combustion engine oil (Caterpillar 1G2 method)
  GB/T 9932-1988
内燃机油性能评定法(开特皮勒1H2法)(中英文版)
The test method for evaluating the performance of internal combustion engine oil (Caterpillar 1H2 method)
  GB/T 9391-1988
船用雷达技术要求和使用要求 测试方法和要求的测试结果(中英文版)
Shipborne radar,technical and operation requirements--Method of testing and required test results
  GB/T 8104-1987
流量控制阀试验方法(中英文版)
Hydraulic fluid power--Valves--Testing method of flow control valves
  GB/T 8106-1987
方向控制阀试验方法(中英文版)
Hydraulic fluid power--Valves--Testing method of directional control valves
  GB/T 8105-1987
压力控制阀试验方法(中英文版)
Hydraulic fluid power--Valves--Testing method of pressure control valves
  GB/T 7752-1987
绝缘胶粘带工频击穿强度试验方法(中英文版)
Test method for electric strength of insulating adhesive tape at power frequency
  GB/T 5888-1986
苎麻纤维素聚合度测定方法(中英文版)
Testing method of degree of polymerization oframie cellulose
  GB/T 5619-1985
防锈材料百叶箱试验方法(中英文版)
Shed storage exposure test--Testing method for rust-proof material
  GB/T 1765-1979
测定耐湿热、耐盐雾、耐侯性 (人工加速) 的漆膜制备法(中英文版)
Method of producing of paint films for testing heat and humidity resistance,salt-fog resistance and accelerated weathering
  GB/T 1728-1979
漆膜、腻子膜干燥时间测定法(中英文版)
Methods of test for drying time of coatingsof paints and putties
  GB/T 1748-1979
腻子膜柔韧性测定法(中英文版)
Method of test for flexibility of putty coatings

找到:631條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3 4 5