中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 4507-2014 沥青软化点测定法 环球法(中英文版) Standard test method for softening point of bitumen―Ring-and-ball apparatus |
![]() |
|
![]() |
GB/T 8026-2014 石油蜡和石油脂滴熔点测定法(中英文版) Standard test method for drop melting point of petroleum wax,including petrolatum |
![]() |
|
![]() |
GB/T 30200-2013 橡胶塑料注射成型机能耗检测方法(中英文版) Test method for energy consumption of rubber and plastics injection moulding machines |
![]() |
|
![]() |
GB/T 30312-2013 浸胶纱线、线绳和帘线热收缩试验方法(中英文版) Test method for thermal shrinkage of yarns and cords |
![]() |
|
![]() |
GB/T 30311-2013 浸胶芳纶纱线、线绳和帘线拉伸性能的试验方法(中英文版) Test method for tensile properties of dipped aramid yarns and cords |
![]() |
|
![]() |
GB 30228-2013 运动场地地面冲击衰减的安全性能要求和试验方法(中英文版) Safety requirements and test methods for impact attenuation of playground surfacing |
![]() |
|
![]() |
GB/T 30303-2013 工业用甲胺和甲胺水溶液试验方法(中英文版) Test method of methylamines and methylamines water solution for industrial use |
![]() |
|
![]() |
GB/T 5169.20-2013 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
![]() |
|
![]() |
GB/T 30103.1-2013 冷库热工性能试验方法 第1部分:温度和湿度检测(中英文版) Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing |
![]() |
|
![]() |
GB/T 11135-2013 石油馏分及工业脂肪族烯烃溴值的测定 电位滴定法(中英文版) Standard test method for bromine numbers of petroleum distillates and commercial aliphatic olefins by electrometric titration |
![]() |
|
![]() |
GB/T 7689.5-2013 增强材料 机织物试验方法 第5部分:玻璃纤维拉伸断裂强力和断裂伸长的测定(中英文版) Reinforcements - Test method for woven fabrics - Part 5: Determination of glass fibre tensile breaking force and elongation at break |
![]() |
|
![]() |
GB/T 12967.5-2013 铝及铝合金阳极氧化膜检测方法 第5部分:用变形法评定阳极氧化膜的抗破裂性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation |
![]() |
|
![]() |
GB/T 29908-2013 玻璃幕墙和门窗抗爆炸冲击波性能分级及检测方法(中英文版) Classification and test method of air-blast resistance performance for curtain walls,windows and doors |
![]() |
|
![]() |
GB/T 7689.3-2013 增强材料 机织物试验方法 第3部分:宽度和长度的测定(中英文版) Reinforcements - Test method for woven fabrics - Part 3: Determination of width and length |
![]() |
|
![]() |
GB/T 7690.3-2013 增强材料 纱线试验方法 第3部分:玻璃纤维断裂强力和断裂伸长的测定(中英文版) Reinforcements - Test method for yarns - Part 3: Determination of breaking force and breaking elongation for glass fibre |
![]() |
|
![]() |
GB/T 29997-2013 铜及铜合金棒线材涡流探伤方法(中英文版) Eddy current testing method of copper and copper-alloys rods, bars and wires |
![]() |
|
![]() |
GB/T 9780-2013 建筑涂料涂层耐沾污性试验方法(中英文版) Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint |
![]() |
|
![]() |
GB/T 17657-2013 人造板及饰面人造板理化性能试验方法(中英文版) Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels |
![]() |
|
![]() |
GB/T 29831.3-2013 系统与软件功能性 第3部分:测试方法(中英文版) Functionality of system and software - Part 3: Testing method |
![]() |
|
![]() |
GB/T 29832.3-2013 系统与软件可靠性 第3部分:测试方法(中英文版) Reliability of system and software - Part 3: Testing method |
![]() |
|
![]() |
GB/T 29833.3-2013 系统与软件可移植性 第3部分:测试方法(中英文版) Portability of system and software - Part 3: Testing method |
![]() |
|
![]() |
GB/T 29834.3-2013 系统与软件维护性 第3部分:测试方法(中英文版) Maintainability of system and software - Part 3: Testing method |
![]() |
|
![]() |
GB/T 29836.3-2013 系统与软件易用性 第3部分:测评方法(中英文版) Usability of system and software - Part 3:Method of evaluating and testing |
![]() |
|
![]() |
GB/T 29895-2013 横向振动法测试木质材料动态弯曲弹性模量方法(中英文版) Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration |
![]() |
|
![]() |
GB/T 14372-2013 危险货物运输 爆炸品的认可和分项试验方法(中英文版) Transport of dangerous goods - Test method of acceptance and classification for explosives |
![]() |
|
![]() |
GB/T 6291-2013 夹扭钳和剪切钳 试验方法(中英文版) Pliers and nippers - Methods of test |
![]() |
|
![]() |
GB/T 29835.3-2013 系统与软件效率 第3部分:测试方法(中英文版) Efficiency of system and software - Part 3:Testing method |
![]() |
|
![]() |
GB/T 29739-2013 门窗反复启闭耐久性试验方法(中英文版) Test method of resistance to repeat opening and closing for windows and doors |
![]() |
|
![]() |
GB/T 29737-2013 建筑门窗防沙尘性能分级及检测方法(中英文版) Graduations and test method of sand and dust resistance performance for building external windows and doors |
![]() |
|
![]() |
GB/T 29738-2013 建筑幕墙和门窗抗风携碎物冲击性能分级及检测方法(中英文版) Graduations and test method for performance of exterior windows and doors, curtain walls impacted by windborne debris in windstorm |
![]() |
|
![]() |
GB 17578-2013 客车上部结构强度要求及试验方法(中英文版) Requirements and test methods of strength for the superstructure of bus |
![]() |
|
![]() |
GB 29753-2013 道路运输 食品与生物制品冷藏车 安全要求及试验方法(中英文版) Road transportation - Perishable food and biological product of refrigerated van - Security requirement and test methods |
![]() |
|
![]() |
GB/T 7689.2-2013 增强材料 机织物试验方法 第2部分:经、纬密度的测定(中英文版) Reinforcements - Test method for woven fabrics - Part 2: Determination of number of yarns per unit length of warp and weft |
![]() |
|
![]() |
GB/T 19264.2-2013 电气用压纸板和薄纸板 第2部分:试验方法(中英文版) Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
![]() |
|
![]() |
GB/T 5008.1-2013 起动用铅酸蓄电池 第1部分: 技术条件和试验方法(中英文版) Lead-acid starter batteries - Part 1: Technical conditions and methods of test |
![]() |
|
![]() |
GB/T 50266-2013 工程岩体试验方法标准(中英文版) Standard for test methods of engineering rock mass |
![]() |
|
![]() |
GB/T 1864-2012 颜料和体质颜料通用试验方法 颜料颜色的比较(中英文版) General methods of test for pigments and extenders - Comparison of colour of pigments |
![]() |
|
![]() |
GB/T 28993-2012 结构用锯材力学性能测试方法(中英文版) Standard test methods for mechanical properties of structural lumber |
![]() |
|
![]() |
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
![]() |
|
![]() |
GB/T 29417-2012 水泥砂浆和混凝土干燥收缩开裂性能试验方法(中英文版) Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete |
![]() |
|
![]() |
GB/T 29418-2012 塑木复合材料产品物理力学性能测试(中英文版) Test methods for mechannical and physical properties of wood-plastic composite product |
![]() |
|
![]() |
GB/T 18861-2012 汽车轮胎和摩托车轮胎滚动阻力试验方法 多点试验(中英文版) Test methods of rolling resistance for motor vehicle tyres and motorcycle tyres - Multi-point test |
![]() |
|
![]() |
GB/T 29040-2012 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性(中英文版) Test methods of rolling resistance for motor vehicle tyres - Single point test and correlation of measurement results |
![]() |
|
![]() |
GB/T 29043-2012 建筑幕墙保温性能分级及检测方法(中英文版) Graduation and test method for thermal insulating properties of curtain walls |
![]() |
|
![]() |
GB/T 29036-2012 不锈钢表面氧化着色 技术规范和试验方法(中英文版) Coloring of stainless steel by Oxidation - Specification and test methods |
![]() |
|
![]() |
GB/T 29247-2012 工业自动化仪表通用试验方法(中英文版) General methods for testing the performance of industrial process measurement and control instruments |
![]() |
|
![]() |
GB/T 20167-2012 稀土抛光粉物理性能测试方法 抛蚀量和划痕的测定 重量法(中英文版) Physical test method of rare earth polishing powder - Determination of burnishing mass and scratch - Gravimetry |
![]() |
|
![]() |
GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版) Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings |
![]() |
|
![]() |
GB/T 14999.2-2012 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验(中英文版) Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch |
![]() |
|
![]() |
GB/T 14999.1-2012 高温合金试验方法 第1部分:纵向低倍组织及缺陷酸浸检验(中英文版) Test method for superalloys - Part 1: Verification of longitudinal macro-structures and defect by etch |
![]() |
|
![]() |
GB/T 8017-2012 石油产品蒸气压的测定 雷德法(中英文版) Standard test method for vapor pressure of petroleum products (Reid Method) |
![]() |
|
![]() |
GB/T 2422-2012 环境试验 试验方法编写导则 术语和定义(中英文版) Environmental testing - Guide to drafting of test methods - Terms and definitions |
![]() |
|
![]() |
GB/T 28752-2012 火焰在垂直表面的横向蔓延试验方法(中英文版) Test method for lateral spread of flame on building and transport products in vertical configuration |
![]() |
|
![]() |
GB/T 18029.21-2012 轮椅车 第21部分:电动轮椅车、电动代步车和电池充电器的电磁兼容性要求和测试方法(中英文版) Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
![]() |
|
![]() |
GB/T 50329-2012 木结构试验方法标准(中英文版) Standard for test methods of timber structures |
![]() |
|
![]() |
GB/T 28638-2012 城镇供热管道保温结构散热损失测试与保温效果评定方法(中英文版) Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes |
![]() |
|
![]() |
GB/T 13025.6-2012 制盐工业通用试验方法 钙和镁的测定(中英文版) General test method in salt industry - Determination of calcium and magnesium |
![]() |
|
![]() |
GB/T 15338-2012 炭黑 试验方法精密度和偏差的确认(中英文版) Carbon black - Validation of test method precision and bias |
![]() |
|
![]() |
GB/T 8243.9-2012 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests |
![]() |
|
![]() |
GB/T 50152-2012 混凝土结构试验方法标准(中英文版) Standard for test method of concrete structures |
![]() |
|
![]() |
GB/T 27662-2011 激光光束指向和位置稳定性测试方法(中英文版) Test methods for pointing and positional stability of laser beam |
![]() |
|
![]() |
GB/T 27698.6-2011 热交换器及传热元件性能测试方法 第6部分:空冷器用翅片管(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 6: Fing tube for air-cooled heat exchangers |
![]() |
|
![]() |
GB/T 27698.5-2011 热交换器及传热元件性能测试方法 第5部分:管壳式热交换器用换热管(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 5: Heat transfer tube for tubular heat exchangers |
![]() |
|
![]() |
GB/T 27698.4-2011 热交换器及传热元件性能测试方法 第4部分:螺旋板式热交换器(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 4: Spiral heat exchanger |
![]() |
|
![]() |
GB/T 27698.3-2011 热交换器及传热元件性能测试方法 第3部分:板式热交换器(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 3: Plate heat exchanger |
![]() |
|
![]() |
GB/T 27698.2-2011 热交换器及传热元件性能测试方法 第2部分:管壳式热交换器(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 2: Tubular heat exchanger |
![]() |
|
![]() |
GB/T 27698.1-2011 热交换器及传热元件性能测试方法 第1部分:通用要求(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 1: General requirements |
![]() |
|
![]() |
GB/T 5203-2011 核反应堆安全逻辑装置特性和检验方法(中英文版) Safety logic assemblies of nuclear reactor characteristics and test methods |
![]() |
|
![]() |
GB/T 27765-2011 SiO2、TiO2、Fe3O4及Al2O3纳米颗粒生物效应的透射电子显微镜检测方法(中英文版) Testing methods of SiO2, TiO2, Fe3O4 and Al2O3 nanoparticles biological effect by transmission electron microscope (TEM) |
![]() |
|
![]() |
GB/T 27762-2011 热重分析仪质量示值校准的试验方法(中英文版) Standard test method for mass scale calibration of thermogravimetric analyzers |
![]() |
|
![]() |
GB/T 27666-2011 制造用激光器光束质量的评价和测试方法(中英文版) Evaluation and test method for beam quality of manufacturing laser system |
![]() |
|
![]() |
GB/T 27698.7-2011 热交换器及传热元件性能测试方法 第7部分:空冷器噪声测定(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 7: Measurement of noise from air-cooled heat exchangers |
![]() |
|
![]() |
GB/T 27904-2011 火焰引燃家具和组件的燃烧性能试验方法(中英文版) Testing method for fire characteristics of furniture and subassemblies exposed to flaming ignition source |
![]() |
|
![]() |
GB/T 27903-2011 电梯层门耐火试验 完整性、隔热性和热通量测定法(中英文版) Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux |
![]() |
|
![]() |
GB/T 27778-2011 杀鼠剂现场药效测定及评价 毒饵(中英文版) Field efficacy test methods and criterions of rodenticides - Rodenticides bait |
![]() |
|
![]() |
GB/T 27784-2011 卫生杀虫剂现场药效测定及评价 总则(中英文版) Field efficacy test methods and criterions of public health insecticides - General principles |
![]() |
|
![]() |
GB/T 27838-2011 烷基磺酸和芳基磺酸类物质危险特性分类方法(中英文版) Test method for hazard classification of alkylsulphonic acids and arylsulphonic acid mixtures |
![]() |
|
![]() |
GB/T 27837-2011 甲酸及其混合物危险特性分类方法(中英文版) Test method for hazard classification of formic acid and formic acid mixtures |
![]() |
|
![]() |
GB/T 27761-2011 热重分析仪失重和剩余量的试验方法(中英文版) Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers |
![]() |
|
![]() |
GB/T 27787-2011 卫生杀虫器械实验室效果测定及评价 粘蟑纸(中英文版) Laboratory efficacy test methods and criterions of public health equipment - Cockroach sticky trap |
![]() |
|
![]() |
GB/T 28203-2011 家具用连接件技术要求及试验方法(中英文版) Technical requirements and test methods of furniture connectors |
![]() |
|
![]() |
GB/T 27698.8-2011 热交换器及传热元件性能测试方法 第8部分:热交换器工业标定(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 8: Determination of industrial locale for heat exchangers |
![]() |
|
![]() |
GB/T 18570.6-2011 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法(中英文版) Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method |
![]() |
|
![]() |
GB/T 28200-2011 钢制储物柜(架)技术要求及试验方法(中英文版) Technical requirements and test methods of steeliness storage units(rack) |
![]() |
|
![]() |
GB/T 27797.8-2011 纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC |
![]() |
|
![]() |
GB/T 27797.2-2011 纤维增强塑料 试验板制备方法 第2部分:接触和喷射模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding |
![]() |
|
![]() |
GB/T 27797.11-2011 纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
![]() |
|
![]() |
GB/T 27782-2011 卫生杀虫剂现场药效测定及评价 气雾剂(中英文版) Field efficacy test methods and criterions of public health insecticides - Aerosol |
![]() |
|
![]() |
GB/T 27862-2011 化学品危险性分类试验方法 气体和气体混合物燃烧潜力和氧化能力(中英文版) Testing method for classification of chemical hazards - Fire potential and oxidizing ability of gases and gas mixtures |
![]() |
|
![]() |
GB/T 27786-2011 卫生杀虫器械实验室效果测定及评价 粘蝇带(纸)(中英文版) Laboratory efficacy test methods and criterions of public health equipment - Sticky tape or paper for flies |
![]() |
|
![]() |
GB/T 27785-2011 卫生杀虫器械实验室效果测定及评价 电子灭蚊蝇器(中英文版) Laboratory efficacy test methods and criterions of public health equipment - Electronic trap for mosquitoes and flies |
![]() |
|
![]() |
GB/T 20485.31-2011 振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试(中英文版) Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity |
![]() |
|
![]() |
GB/T 27783-2011 卫生杀虫剂现场药效测定及评价 杀蟑毒(胶)饵(中英文版) Field efficacy test methods and criterions of public health insecticides - Cockroach bait |
![]() |
|
![]() |
GB/T 27977-2011 水泥生产电能能效测试及计算方法(中英文版) Test and calculation methods of electricity efficiency of cement production |
![]() |
|
![]() |
GB/T 27781-2011 卫生杀虫剂现场药效测定及评价 喷射剂(中英文版) Field efficacy test methods and criterions of public health insecticides - Spray fluid |
![]() |
|
![]() |
GB/T 27780-2011 杀鼠器械实验室效果测定及评价 粘鼠板(中英文版) Laboratory efficacy test methods and criterions of public health equipment - Rodent sticky trap |
![]() |
|
![]() |
GB/T 7023-2011 低、中水平放射性废物固化体标准浸出试验方法(中英文版) Standard test method for leachability of low and intermediate level solidified radioactive waste forms |
![]() |
|
![]() |
GB/T 27797.10-2011 纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens |
![]() |
|
![]() |
GB/T 27612.3-2011 农业灌溉设备 喷头 第3部分:水量分布特性和试验方法(中英文版) Agricultural irrigation equipment - Sprinklers - Part 3: Characterization of distribution and test methods |
![]() |
|
![]() |
GB/T 26985-2011 原油倾点的测定(中英文版) Standard test method for pour point of crude oils |
![]() |
|
![]() |
GB/T 11059-2011 原油蒸气压的测定 膨胀法(中英文版) Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method) |
![]() |
|
![]() |
GB/T 10820-2011 生活锅炉热效率及热工试验方法(中英文版) Thermal efficiency and test methods of boilers for daily life |
![]() |
|
![]() |
GB/T 50129-2011 砌体基本力学性能试验方法标准(中英文版) Standard for test method of basic mechanics properties of masonry |
![]() |
|
![]() |
GB/T 1346-2011 水泥标准稠度用水量、凝结时间、安定性检验方法(中英文版) Test methods for water requirement of normal consistency, setting time and soundness of the portland cement |
![]() |
|
![]() |
GB/T 26778-2011 汽车列车性能要求及试验方法(中英文版) Combination of vehicle performance requirements and test method |
![]() |
|
![]() |
GB/T 17491-2011 液压泵、马达和整体传动装置 稳态性能的试验及表达方法(中英文版) Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance |
![]() |
|
![]() |
GB/T 26548.2-2011 手持便携式动力工具 振动试验方法 第2部分:气扳机、螺母扳手和螺丝刀(中英文版) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches,nutrunners and screwdrivers |
![]() |
|
![]() |
GB/T 26682-2011 地面数字电视标准测试接收机技术要求和测量方法(中英文版) Technical requirements and methods of measurement for standard testing receiver of digital terrestial television |
![]() |
|
![]() |
GB/T 26681-2011 地面数字电视标准测试发射机技术要求和测量方法(中英文版) Technical requirements and methods of measurement for standard testing transmitter of digital terrestrial television |
![]() |
|
![]() |
GB/T 12688.1-2011 工业用苯乙烯试验方法 第1部分:纯度和烃类杂质的测定 气相色谱法(中英文版) Test method of styrene for industrial use - Part 1: Determination of purity and hydrocarbon impurities - Gas chromotography |
![]() |
|
![]() |
GB/T 26272-2010 地面数字电视调谐器基本性能要求和测量方法(中英文版) Basic performance requirment and test method of terristrial digital television tuner |
![]() |
|
![]() |
GB/T 12085.1-2010 光学和光学仪器 环境试验方法 第1部分:术语、试验范围(中英文版) Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing |
![]() |
|
![]() |
GB/T 17178.6-2010 信息技术 开放系统互连 一致性测试方法和框架 第6部分:协议轮廓测试规范(中英文版) Information technology - Open system interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification |
![]() |
|
![]() |
GB/T 7962.1-2010 无色光学玻璃测试方法 第1部分:折射率和色散系数(中英文版) Test methods of colourless optical glass - Part 1: Refractive index and coefficient of dispersion |
![]() |
|
![]() |
GB/T 7962.16-2010 无色光学玻璃测试方法 第16部分:线膨胀系数、转变温度和弛垂温度(中英文版) Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient,transformation temperature and yield point temperature |
![]() |
|
![]() |
GB/T 7962.6-2010 无色光学玻璃测试方法 第6部分:杨氏模量、剪切模量及泊松比(中英文版) Test methods of colourless optical glass - Part 6: Young’s modulus,shear modulus and Poisson’s ratio |
![]() |
|
![]() |
GB/T 12967.7-2010 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus |
![]() |
|
![]() |
GB 26445-2010 危险货物运输 物品、包装物品或包装物质可运输性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to article, packaged article or packaged substance for transport |
![]() |
|
![]() |
GB 26446-2010 危险货物运输 排除物质爆炸性的试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to the explosive substance excluded |
![]() |
|
![]() |
GB 26448-2010 危险货物运输 炸药中间体(ANE)的敏感性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to the sensitivity of ammonium nitrate emulsions, suspension or gels, intermediate for blasting explosives(ANE) |
![]() |
|
![]() |
GB/T 27408-2010 实验室质量控制 非标准测试方法的有效性评价 线性关系(中英文版) Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship |
![]() |
|
![]() |
GB/T 24218.3-2010 纺织品 非织造布试验方法 第3部分:断裂强力和断裂伸长率的测定(条样法)(中英文版) Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation (Strip method) |
![]() |
|
![]() |
GB 26444-2010 危险货物运输 物质可运输性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to substances for transport |
![]() |
|
![]() |
GB/T 2013-2010 液体石油化工产品密度测定法(中英文版) Standard test method for density of liquid petrochemical products |
![]() |
|
![]() |
GB/T 25968-2010 分光光度计测量材料的太阳透射比和太阳吸收比试验方法(中英文版) Test methods of solar transmittance and solar absorptance of materials by spectrophotometry |
![]() |
|
![]() |
GB/T 25962-2010 高速条件下汽车轮毂轴承润滑脂漏失量测定法(中英文版) Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions |
![]() |
|
![]() |
GB/T 25965-2010 材料法向发射比与全玻璃真空太阳集热管半球发射比试验方法(中英文版) Test methods of normal emittance of materials and hemispherical emittance of all-glass evacuated collector tubes |
![]() |
|
![]() |
GB/T 25982-2010 客车车内噪声限值及测量方法(中英文版) Permissible levels and test methods of bus internal noise |
![]() |
|
![]() |
GB/T 386-2010 柴油十六烷值测定法(中英文版) Standard test method for cetane number of diesel fuel oil |
![]() |
|
![]() |
GB/T 4508-2010 沥青延度测定法(中英文版) Standard test method for ductility of bitumen |
![]() |
|
![]() |
GB/T 6536-2010 石油产品常压蒸馏特性测定法(中英文版) Standard test method for distillation of petroleum products at atmospheric pressure |
![]() |
|
![]() |
GB/T 9169-2010 喷气燃料热氧化安定性的测定 JFTOT法(中英文版) Standard test method for thermal oxidation stability of aviation turbine fuels - JFTOT procedure |
![]() |
|
![]() |
GB/T 26085-2010 船舶防污漆锡总量的测试及判定(中英文版) Test method and determination of total tin in antifouling paints for ship |
![]() |
|
![]() |
GB/T 25995-2010 精细陶瓷密度和显气孔率试验方法(中英文版) Test methods for density and apparent porostiy of fine ceramics |
![]() |
|
![]() |
GB/T 26067-2010 硅片切口尺寸测试方法(中英文版) Standard test method for dimensions of notches on silicon wafers |
![]() |
|
![]() |
GB/T 3310-2010 铜及铜合金棒材超声波探伤方法(中英文版) Ultrasonic testing method of copper and copper alloy bars |
![]() |
|
![]() |
GB/T 26106-2010 机械镀锌层 技术规范和试验方法(中英文版) Mechanically deposited coatings of zinc - Specification and test methods |
![]() |
|
![]() |
GB/T 4509-2010 沥青针入度测定法(中英文版) Standard test method for penetration of bitumen |
![]() |
|
![]() |
GB/Z 6113.405-2010 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分:不确定度、统计学和限值建模替换试验方法的使用条件(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
![]() |
|
![]() |
GB/T 14999.7-2010 高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法(中英文版) Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings |
![]() |
|
![]() |
GB/T 25774.3-2010 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验(中英文版) Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint |
![]() |
|
![]() |
GB/T 25685.1-2010 土方机械 监视镜和后视镜的视野 第1部分:试验方法(中英文版) Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 1: Test methods |
![]() |
|
![]() |
GB/T 14999.6-2010 锻制高温合金双重晶粒组织和一次碳化物分布测定方法(中英文版) Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings |
![]() |
|
![]() |
GB/T 16937-2010 土方机械 司机视野 试验方法和性能准则(中英文版) Earth-moving machinery - Operator’s field of view - Test method and performance criteria |
![]() |
|
![]() |
GB/T 25774.1-2010 焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验(中英文版) Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys |
![]() |
|
![]() |
GB/T 25497-2010 吸气剂气体吸放性能测试方法(中英文版) Test methods for gas absorbency and release of getters |
![]() |
|
![]() |
GB/T 25480-2010 仪器仪表运输、贮存基本环境条件及试验方法(中英文版) Basic environmental conditions and testing methods for transportation and storage of instruments |
![]() |
|
![]() |
GB/T 19902.4-2010 工业自动化系统与集成 制造软件互操作性能力建规 第4部分:一致性测试方法、判则及报告(中英文版) Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports |
![]() |
|
![]() |
GB/T 25442-2010 旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版) Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles) |
![]() |
|
![]() |
GB/T 25395-2010 葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法(中英文版) Equipment for vine cultivation and wine making - Grape presses - Methods of test |
![]() |
找到:1013條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |