中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 8332-2008
泡沫塑料燃烧性能试验方法 水平燃烧法(中英文版)
Test method for flammability of cellular plastic - Horizonal burning method
 
GB/T 8333-2008
硬质泡沫塑料燃烧性能试验方法 垂直燃烧法(中英文版)
Test method for flammability of rigid cellular plastic - Virtical burning method
 
GB/T 6384-2008
船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法(中英文版)
The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures
 
GB/T 1842-2008
塑料 聚乙烯环境应力开裂试验方法(中英文版)
Plastics - Test method for environmental stress-cracking of polyethylene
 
GB/T 8484-2008
建筑外门窗保温性能分级及检测方法(中英文版)
Graduation and test method for thermal insulating properties of doors and windows
 
GB/T 7106-2008
建筑外门窗气密、水密、抗风压性能分级及检测方法(中英文版)
Graduations and test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors
 
GB/T 11344-2008
无损检测 接触式超声脉冲回波法测厚方法(中英文版)
Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method
 
GB/T 15231-2008
玻璃纤维增强水泥性能试验方法(中英文版)
Test methods for the properties of glassfibre reinforced cement
 
GB/T 18856.3-2008
水煤浆试验方法 第3部分: 筛分试验(中英文版)
Test methods for coal water mixture - Part 3: Sieving method
 
GB/T 18856.1-2008
水煤浆试验方法 第1部分: 采样(中英文版)
Test methods for quality of coal water mixture - Part 1:Sampling
 
GB/T 18856.2-2008
水煤浆试验方法 第2部分: 浓度测定(中英文版)
Test methods for coal water mixture - Part 2: Determination of mass percentage of solid
 
GB/T 18856.5-2008
水煤浆试验方法 第5部分:稳定性测定(中英文版)
Test methods for coal water mixture - Part 5: Determination of the stability
 
GB/T 18856.6-2008
水煤浆试验方法 第6部分:密度测定(中英文版)
Test methods for coal water mixture - Part 6: Determination of the density
 
GB/T 18856.7-2008
水煤浆试验方法 第7部分: pH值测定(中英文版)
Test methods for coal water mixture - Part 7: Determination for pH value
 
GB/T 18856.4-2008
水煤浆试验方法 第4部分:表观粘度测定(中英文版)
Test methods for coal water mixture - Part 4: Determination of apparent viscosity
 
GB/T 17614.2-2008
工业过程控制系统用变送器 第2部分: 检查和例行试验方法(中英文版)
Transmitters for use industrial-process control systems - Part 2: Methods for inspection and routine testing
 
GB/T 8171-2008
使用缓冲包装材料进行的产品机械冲击脆值试验方法(中英文版)
Test method for mechanical shock fragility rating of products using packaging cushioning materials
 
GB/T 8167-2008
包装用缓冲材料动态压缩试验方法(中英文版)
Testing method of dynamic compression for packaging cushioning materials
 
GB/T 17548-2008
信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南(中英文版)
Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards
 
GB/Z 22203-2008
家用及类似场所用过电流保护断路器的可靠性试验方法(中英文版)
Reliability test method of circuit-breakers for overcurrent protection for household and similar installation
 
GB/Z 22200-2008
小容量交流接触器可靠性试验方法(中英文版)
Reliability test method for lower capacity alternating current contactors
 
GB/T 13501-2008
封闭式制冷压缩机用电动机绝缘相容性试验方法(中英文版)
Test methods for insulation compatibility of electric motors for hermetic refrigeration compressors
 
GB/T 7121.2-2008
农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分:后置式动态试验方法(中英文版)
The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method
 
GB/T 5621-2008
凿岩机械与气动工具 性能试验方法(中英文版)
Test methods of performance for rock drilling machines and pneumatic tools
 
GB/T 8117.1-2008
汽轮机热力性能验收试验规程 第1部分: 方法A 大型凝汽式汽轮机高准确度试验(中英文版)
Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines
 
GB/T 14057.1-2008
放射性污染表面去污 第1部分:试验与评价去污难易程度的方法(中英文版)
Decontamination of radioactively contaminated surfaces - Part 1: Method for testing and assessing the ease of decontamination
 
GB/T 11809-2008
压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验(中英文版)
Test method of weld of fuel rod for PWR - Metallographic examination and radiographic testing
 
GB/T 8117.2-2008
汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验(中英文版)
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
 
GB/T 22052-2008
用液体蒸气压力计测定液体的蒸气压力 温度关系和初始分解温度的方法(中英文版)
Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope
 
GB/T 9343-2008
塑料燃烧性能试验方法 闪燃温度和自燃温度的测定(中英文版)
Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature
 
GB/T 16777-2008
建筑防水涂料试验方法(中英文版)
Test methods for building waterproofing coatings
 
GB/T 13096-2008
拉挤玻璃纤维增强塑料杆力学性能试验方法(中英文版)
Test method for mechanical properties of pultruded glass fiber reinforced plastic rods
 
GB/T 13891-2008
建筑饰面材料镜向光泽度测定方法(中英文版)
Test methods of specular gloss for decorative building materials
 
GB/T 1458-2008
纤维缠绕增强塑料环形试样力学性能试验方法(中英文版)
Test method for mechanical properties of ring of filament-winding reinforced plastics
 
GB/T 15738-2008
导电和抗静电纤维增强塑料电阻率试验方法(中英文版)
Test method for resistivity of conducting and antistatic fiber reinforced plastics
 
GB/T 22079-2008
标称电压高于1000V使用的户内和户外聚合物绝缘子 一般定义、试验方法和接收准则(中英文版)
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and acceptance criteria
 
GB/T 2567-2008
树脂浇铸体性能试验方法(中英文版)
Test methods for properties of resin casting boby
 
GB/T 2573-2008
玻璃纤维增强塑料老化性能试验方法(中英文版)
Test method for aging properties of glass fiber reinforced plastics
 
GB/T 7193-2008
不饱和聚酯树脂试验方法(中英文版)
Test methods for unsaturated polyester resins
 
GB/T 749-2008
水泥抗硫酸盐侵蚀试验方法(中英文版)
Test method for determining capability of resisting sulfate corrode of cement
 
GB/T 9966.8-2008
天然饰面石材试验方法 第8部分: 用均匀静态压差检测石材挂装系统结构强度试验方法(中英文版)
Test methods for natural facing stones - Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference
 
GB/T 16779-2008
纤维增强塑料层合板拉-拉疲劳性能试验方法(中英文版)
Test method for tension-tension fatigue of fiber reinforced plastic laminates
 
GB/T 12954.1-2008
建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法(中英文版)
Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives
 
GB/T 14813-2008
热管寿命试验方法(中英文版)
Life testing method for heat pipes
 
GB/T 14812-2008
热管传热性能试验方法(中英文版)
Testing method for heat transfer performance of heat pipes
 
GB/T 2951.11-2008
电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
 
GB/T 2951.12-2008
电缆和光缆绝缘和护套材料通用试验方法 第12部分:通用试验方法 热老化试验方法(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 12:Methods for general application - Thermal ageing methods
 
GB/T 2951.13-2008
电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test
 
GB/T 2951.14-2008
电缆和光缆绝缘和护套材料通用试验方法 第14部分:通用试验方法 低温试验(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature
 
GB/T 2951.31-2008
电缆和光缆绝缘和护套材料通用试验方法 第31部分:聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking
 

找到:2338條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [28] [29] [30] [31] [32] [33] [34]