中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 32346.1-2015 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分:试验方法和要求(中英文版) Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements |
|||
GB/T 13277.4-2015 压缩空气 第4部分:固体颗粒测量方法(中英文版) Compressed air—Part 4: Test methods for solid particle content |
|||
GB/T 13277.3-2015 压缩空气 第3部分:湿度测量方法(中英文版) Compressed air—Part 3: Test methods for measurement of humidity |
|||
GB/T 13277.2-2015 压缩空气 第2部分:悬浮油含量测量方法(中英文版) Compressed air—Part 2: Test methods for oil aerosol content |
|||
GB/T 8243.13-2015 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings |
|||
GB/T 32242.1-2015 植物保护机械 吸入式加药装置 第1部分:测试方法(中英文版) Equipment for crop protection—Induction hopper—Part 1: Test methods |
|||
GB/T 16886.20-2015 医疗器械生物学评价 第20部分:医疗器械免疫毒理学试验原则和方法(中英文版) Biological evaluation of medical devices—Part 20: Principles and methods for immunotoxicology testing of medical devices |
|||
GB/T 18978.307-2015 人-系统交互工效学 第307部分:电子视觉显示器的分析和符合性试验方法(中英文版) Ergonomics of human-system interaction—Part 307: Analysis and compliance test methods for electronic visual displays |
|||
GB/T 32272.1-2015 机动工业车辆 验证视野的试验方法 第1部分:起重量不大于10t的坐驾式、站驾式车辆和伸缩臂式叉车(中英文版) Powered industrial trucks—Test methods for verification of visibility—Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10t capacity |
|||
GB/T 32095.1-2015 家用食品金属烹饪器具不粘表面性能及测试规范 第1部分:性能通用要求(中英文版) Performance and test methods of non-stick surface of domestic metal utensils for household food—Part 1:General requirement of performance |
|||
GB/T 32065.1-2015 海洋仪器环境试验方法 第1部分:总则(中英文版) Environmental test methods for oceanographic instruments—Part 1: General |
|||
GB/T 32065.2-2015 海洋仪器环境试验方法 第2部分:低温试验(中英文版) Environmental test methods for oceanographic instruments—Part 2:Cold |
|||
GB/T 32065.4-2015 海洋仪器环境试验方法 第4部分:高温试验(中英文版) Environmental test methods for oceanographic instruments—Part 4:Dry heat |
|||
GB/T 32065.5-2015 海洋仪器环境试验方法 第5部分:高温贮存试验(中英文版) Environmental test methods for oceanographic instruments—Part 5:Dry heat storage |
|||
GB/T 32065.6-2015 海洋仪器环境试验方法 第6部分:恒定湿热试验(中英文版) Environmental test methods for oceanographic instruments—Part 6:Damp heat, steady state |
|||
GB/T 18890.1-2015 额定电压220kV(Um=252 kV)交联聚乙烯绝缘电力电缆及其附件 第1部分:试验方法和要求(中英文版) Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements |
|||
GB/T 32095.2-2015 家用食品金属烹饪器具不粘表面性能及测试规范 第2部分:不粘性及耐磨性测试规范(中英文版) Performance and test methods of non-stick surface of domestic metal cooking utensils for household food—Part 2:Specification on non-stick performance and abrasion resistance |
|||
GB/T 32095.3-2015 家用食品金属烹饪器具不粘表面性能及测试规范 第3部分:耐腐蚀性测试规范(中英文版) Performance and test methods of non-stick surface of domestic metal utensils for household food—Part 3:Test specification of corrosion resistance |
|||
GB/T 5169.15-2015 电工电子产品着火危险试验 第15部分:试验火焰 500W火焰 装置和确认试验方法(中英文版) Fire hazard testing for electric and electronic products—Part 15: Test flames—500W flames—Apparatus and confirmational test methods |
|||
GB/T 5169.36-2015 电工电子产品着火危险试验 第36部分:燃烧流的腐蚀危害 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent—Summary and relevance of test methods |
|||
GB/T 32065.7-2015 海洋仪器环境试验方法 第7部分:交变湿热试验(中英文版) Environmental test methods for oceanographic instruments—Part 7:Damp heat, cyclic |
|||
GB/T 32065.3-2015 海洋仪器环境试验方法 第3部分:低温贮存试验(中英文版) Environmental test methods for oceanographic instruments—Part 3: Cold storage |
|||
GB/T 21223.1-2015 老化试验数据统计分析导则 第1部分:建立在正态分布试验结果的平均值基础上的方法(中英文版) Guide for the statistical analysis of ageing test data—Part 1: Methods based on mean values of normally distributed test results |
|||
GB/T 17737.201-2015 同轴通信电缆 第1-201部分:环境试验方法 电缆的冷弯性能试验(中英文版) Coaxial communication cables—Part 1-201: Environmental test methods—Test for cold bend performance of cable |
|||
GB/T 5211.18-2015 颜料和体质颜料通用试验方法 第18部分:筛余物的测定 水法(手工操作)(中英文版) General methods of test for pigments and extenders—Part 18: Determination of residue on sieve—Water method (Manual procedure) |
|||
GB/T 5838.3-2015 荧光粉 第3部分:性能试验方法(中英文版) Phosphors—Part 3: Test methods for properties |
|||
GB/T 31467.3-2015 电动汽车用锂离子动力蓄电池包和系统 第3部分:安全性要求与测试方法(中英文版) Lithium-ion traction battery pack and system for Electric vehicles—Part 3: Safety requirements and test methods |
|||
GB/T 31489.1-2015 额定电压500kV及以下直流输电用挤包绝缘电力电缆系统 第1部分:试验方法和要求(中英文版) DC extruded cable systems for power transmission at a rated voltage up to and including 500kV―Part 1: Test methods and requirements |
|||
GB/T 5594.3-2015 电子元器件结构陶瓷材料性能测试方法 第3部分:平均线膨胀系数测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 3: Test method for mean coefficient of linear expansion |
|||
GB/T 5594.4-2015 电子元器件结构陶瓷材料性能测试方法 第4部分:介电常数和介质损耗角正切值的测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 4: Test method for permittivity and dielectric loss angle tangent value |
|||
GB/T 5594.6-2015 电子元器件结构陶瓷材料性能测试方法 第6部分:化学稳定性测试方法(中英文版) Test methods for properties of structure ceramics used in eletronic components and device—Part 6: Test method for chemical durability |
|||
GB/T 5594.7-2015 电子元器件结构陶瓷材料性能测试方法 第7部分:透液性测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 7: Test method for liquid permeability |
|||
GB/T 5594.8-2015 电子元器件结构陶瓷材料性能测试方法 第8部分:显微结构的测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 8: Test method for microstructure |
|||
GB/T 18488.2-2015 电动汽车用驱动电机系统 第2部分:试验方法(中英文版) Drive motor system for electric vehicles—Part 2: Test methods |
|||
GB/T 31334.1-2015 浸胶帆布试验方法 第1部分:粘合强度(中英文版) Test methods for dipped canvas—Part 1: Adhesion strength |
|||
GB/T 31334.2-2015 浸胶帆布试验方法 第2部分:经向卷曲度和密度(中英文版) Test methods for dipped canvas—Part 2: Yarn crimp on warp and density |
|||
GB/T 31334.3-2015 浸胶帆布试验方法 第3部分:硬挺度(中英文版) Test methods for dipped canvas—Part 3: Stiffness |
|||
GB/T 30032.1-2015 移动式升降工作平台 带有特殊部件的设计、计算、安全要求和试验方法 第1部分:装有伸缩式护栏系统的移动式升降工作平台(中英文版) Mobile elevating work platforms—Design, calculations, safety requirements and test methods relative to special features—Part 1: MEWPs with retractable guardrail systems |
|||
GB/T 17614.2-2015 工业过程控制系统用变送器 第2部分:检查和例行试验方法(中英文版) Transmitters for use in industrial-process control systems—Part 2: Methods for inspection and roution testing |
|||
GB/T 24218.18-2014 纺织品 非织造布试验方法 第18部分:断裂强力和断裂伸长率的测定(抓样法)(中英文版) Textiles―Test methods for nonwovens―Part 18: Determination of breaking strength and elongation (grab method) |
|||
GB/T 4372.6-2014 直接法氧化锌化学分析方法 第6部分:金属锌的检验(中英文版) Methods for chemical analysis of zincoxide produced by direct process―Part 6:Testing of metallic zinc |
|||
GB/T 10066.3-2014 电热装置的试验方法 第3部分:有心感应炉和无心感应炉(中英文版) Test methods for electroheat installations―Part 3: Induction channel and induction crucible furnaces |
|||
GB/T 12967.4-2014 铝及铝合金阳极氧化膜检测方法 第4部分:着色阳极氧化膜耐紫外光性能的测定(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
|||
GB/T 2424.12-2014 环境试验 第2部分:试验方法 试验Kd:接触点和连接件的硫化氢试验导则(中英文版) Environmental testing—Part 2: Test methods—Guidance to test Kd: Hydrogen sulphide test for contacts and connections |
|||
GB/T 2423.20-2014 环境试验 第2部分:试验方法 试验Kd:接触点和连接件的硫化氢试验(中英文版) Environmental testing—Part 2:Test methods—Test Kd: Hydrogen sulphide test for contacts and connections |
|||
GB/T 10066.5-2014 电热装置的试验方法 第5部分:电热和电化学用等离子体设备(中英文版) Test methods for electroheat installations—Part 5:Plasma equipment for electroheat and electrochemical applications |
|||
GB/T 5169.38-2014 电工电子产品着火危险试验 第38部分:燃烧流的毒性 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products―Part 38: Toxicity of fire effluent―Summary and relevance of test methods |
|||
GB/T 22517.10-2014 体育场地使用要求及检验方法 第10部分:壁球场地(中英文版) Technical requirements and test methods for sports field—Part 10: Squash |
|||
GB/T 22517.11-2014 体育场地使用要求及检验方法 第11部分:曲棍球场地(中英文版) Technical requirements and test methods for sports field―part 11: Hockey |
|||
GB/Z 5169.34-2014 电工电子产品着火危险试验 第34部分:着火危险评定导则 起燃性 试验方法概要和相关性(中英文版) Fire hazard testing for electric and eletronic products—Part 34: Guidance for assessing the fire hazard—Ignitability—Summary and relevance of test methods |
|||
GB/T 11017.1-2014 额定电压110kV(Um=126kV)交联聚乙烯绝缘电力电缆及其附件 第1部分:试验方法和要求(中英文版) Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV(Um=126 kV)―Part 1: Test methods and requirements |
|||
GB/T 30790.6-2014 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分:实验室性能测试方法(中英文版) Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods |
|||
GB/T 5211.15-2014 颜料和体质颜料通用试验方法 第15部分:吸油量的测定(中英文版) General methods of test for pigments and extenders―Part 15:Determination of oil absorption value |
|||
GB/T 30475.2-2013 压缩空气过滤器 试验方法 第2部分:油蒸气(中英文版) Filters for compressed air― Test methods―Part 2: Oil vapours |
|||
GB/T 30475.1-2013 压缩空气过滤器 试验方法 第1部分:悬浮油(中英文版) Filters for compressed air―Test methods―Part 1: Oil aerosols |
|||
GB/T 5169.20-2013 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|||
GB/T 30268.1-2013 信息技术 生物特征识别应用程序接口(BioAPI)的符合性测试 第1部分:方法和规程(中英文版) Information technology—Conformance testing for the biometric application programming interface (BioAPI)—Part 1: Methods and procedures |
|||
GB/T 30040.7-2013 双层罐渗漏检测系统 第7部分:双层间隙、防渗漏衬里及防渗漏外套的一般要求和试验方法(中英文版) Leak detection systems―Part 7:General requirements and test methods for interstitial spaces,leak protecting linings and leak protecting jacket |
|||
GB/T 5169.12-2013 电工电子产品着火危险试验 第12部分:灼热丝/热丝基本试验方法 材料的灼热丝可燃性指数(GWFI)试验方法(中英文版) Fire hazard testing for electric and electronic products―Part 12: Glowing/hot-wire based test methods―Glow-wire flammability index (GWFI) test method for materials |
|||
GB/T 5169.13-2013 电工电子产品着火危险试验 第13部分:灼热丝/热丝基本试验方法 材料的灼热丝起燃温度(GWIT)试验方法(中英文版) Fire hazard testing for electric and electronic product―Part 13:Glowing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials |
|||
GB/T 30177.1-2013 过滤机性能测试方法 第1部分:加压过滤机(中英文版) Methods of perfomance testing for filters―Part 1:Press filter |
|||
GB/T 30103.1-2013 冷库热工性能试验方法 第1部分:温度和湿度检测(中英文版) Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing |
|||
GB/T 30103.3-2013 冷库热工性能试验方法 第3部分:围护结构热流量检测(中英文版) Methods of testing for thermal performance on cold store―Part 3: Heat flux testing for envelope enclosure |
|||
GB/T 30103.2-2013 冷库热工性能试验方法 第2部分:风速检测(中英文版) Methods of testing for thermal performance on cold store―Part 2: Air velocity testing |
|||
GB/T 27797.4-2013 纤维增强塑料 试验板制备方法 第4部分:预浸料模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 4:Moulding of prepregs |
|||
GB/T 12967.5-2013 铝及铝合金阳极氧化膜检测方法 第5部分:用变形法评定阳极氧化膜的抗破裂性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation |
|||
GB/T 30032.2-2013 移动式升降工作平台 带有特殊部件的设计、计算、安全要求和试验方法 第2部分:装有非导电(绝缘)部件的移动式升降工作平台(中英文版) Mobile elevating work platforms - Design, calculations,safety requirements and test methods relative to special features - Part 2: MEWPs with non-conductive (insulating)components |
|||
GB/T 27748.2-2013 固定式燃料电池发电系统 第2部分:性能试验方法(中英文版) Stationary fuel cell power systems - part 2: Performance test methods |
|||
GB/T 2423.24-2013 环境试验 第2部分:试验方法 试验Sa:模拟地面上的太阳辐射及其试验导则(中英文版) Environmental testing - Part 2: Test methods - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
|||
GB/T 2423.19-2013 环境试验 第2部分:试验方法 试验Kc:接触点和连接件的二氧化硫试验(中英文版) Environmental testing - Part 2: Test methods - Test Kc: Sulphur dioxide test for contacts and connections |
|||
GB/T 2424.11-2013 环境试验 第2部分:试验方法 试验Kc:接触点和连接件的二氧化硫试验导则(中英文版) Environmental testing - Part 2: Test methods - Guidance to test Kc: Sulphur dioxide test for contacts and connections |
|||
GB/T 30001.5-2013 信息技术 基于射频的移动支付 第5部分:射频接口测试方法(中英文版) Information technology - RF-based mobile payment - Part 5: Test methods of radio frequency interface |
|||
GB/T 16903.2-2013 标志用图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility |
|||
GB/T 29627.2-2013 电气用聚芳酰胺纤维纸板 第2部分:试验方法(中英文版) Aramid pressboard for electrical purposes - Part 2: Methods of test |
|||
GB/T 20629.2-2013 电气用非纤维素纸 第2部分:试验方法(中英文版) Non-cellulosic paper for electrical purposes - Part 2:Methods of test |
|||
GB/T 19264.2-2013 电气用压纸板和薄纸板 第2部分:试验方法(中英文版) Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
|||
GB/T 1864-2012 颜料和体质颜料通用试验方法 颜料颜色的比较(中英文版) General methods of test for pigments and extenders - Comparison of colour of pigments |
|||
GB/T 29235.2-2012 接入设备节能参数和测试方法 第2部分:ADSL局端(中英文版) Energy efficiency metrologies and test methods for access equipments - Part 2: ADSL DSLAM |
|||
GB/T 29235.1-2012 接入设备节能参数和测试方法 第1部分:ADSL用户端(中英文版) Energy efficiency metrology and test methods for access equipments - Part 1:ADSL CPE |
|||
GB/T 11417.5-2012 眼科光学 接触镜 第5部分: 光学性能试验方法(中英文版) Ophthalmic optics - Contact lenses - Part 5: Testing methods for optical properties |
|||
GB/T 18029.24-2012 轮椅车 第24部分:乘坐者操纵的爬楼梯装置的要求和测试方法(中英文版) Wheelchairs - Part 24:Requirements and test methods for user-operated stair climbing devices |
|||
GB/T 18029.14-2012 轮椅车 第14部分:电动轮椅车和电动代步车动力和控制系统 要求和测试方法(中英文版) Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooter - Requirements and test methods |
|||
GB/T 29459.2-2012 在役承压设备金属材料小冲杆试验方法 第2部分:室温下拉伸性能的试验方法(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 2:Method of test for tensile properties at room temperature |
|||
GB/T 29459.1-2012 在役承压设备金属材料小冲杆试验方法 第1部分:总则(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 1:General requirements |
|||
GB/T 15623.3-2012 液压传动 电调制液压控制阀 第3部分:压力控制阀试验方法(中英文版) Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves |
|||
GB/T 2820.11-2012 往复式内燃机驱动的交流发电机组 第11部分:旋转不间断电源 性能要求和试验方法(中英文版) Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
|||
GB/T 14999.2-2012 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验(中英文版) Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch |
|||
GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版) Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings |
|||
GB 10810.4-2012 眼镜镜片 第4部分:减反射膜规范及测量方法(中英文版) Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings |
|||
GB/T 14999.3-2012 高温合金试验方法 第3部分:棒材纵向断口检验(中英文版) Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars |
|||
GB/T 2423.50-2012 环境试验 第2部分:试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验(中英文版) Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components |
|||
GB/T 18029.21-2012 轮椅车 第21部分:电动轮椅车、电动代步车和电池充电器的电磁兼容性要求和测试方法(中英文版) Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
|||
GB/T 28703-2012 圆柱螺纹检测方法(中英文版) Test methods for parallel screw threads |
|||
GB/T 24218.12-2012 纺织品 非织造布试验方法 第12部分:受压吸收性的测定(中英文版) Textiles - Test methods for nonwovens - Part 12:Demand absorbency |
|||
GB/T 24218.11-2012 纺织品 非织造布试验方法 第11部分:溢流量的测定(中英文版) Textiles - Test methods for nonwovens - Part 11: Run-off |
|||
GB/T 8243.9-2012 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests |
|||
GB/T 27797.10-2011 纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens |
|||
GB/T 27934.4-2011 纸质印刷品覆膜过程控制及检测方法 第4部分:反应型聚氨酯(PUR)热熔胶即涂覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive |
|||
GB/T 27934.3-2011 纸质印刷品覆膜过程控制及检测方法 第3部分:水基胶黏剂即涂干式覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive |
|||
GB/T 27934.2-2011 纸质印刷品覆膜过程控制及检测方法 第2部分:乙烯-醋酸乙烯共聚物(EVA)热熔胶预涂覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive |
|||
GB 27934.1-2011 纸质印刷品覆膜过程控制及检测方法 第1部分:基本要求(中英文版) Lamination process control and testing methods for paper prints - Part 1: General requirements |
|||
GB/T 22517.6-2011 体育场地使用要求及检验方法 第6部分:田径场地(中英文版) Technical requirements and test methods for sports filed - Part 6: Track and field |
|||
GB/T 27797.5-2011 纤维增强塑料 试验板制备方法 第5部分:缠绕成型(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding |
|||
GB/T 27797.11-2011 纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
|||
GB/T 20633.2-2011 承载印制电路板用涂料(敷形涂料) 第2部分:试验方法(中英文版) Coatings for loaded printed wire boards (conformal coatings) - Part 2:Methods of test |
|||
GB/T 20485.31-2011 振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试(中英文版) Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity |
|||
GB/T 27797.3-2011 纤维增强塑料 试验板制备方法 第3部分:湿法模塑(中英文版) Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding |
|||
GB/T 27797.2-2011 纤维增强塑料 试验板制备方法 第2部分:接触和喷射模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding |
|||
GB/T 27797.6-2011 纤维增强塑料 试验板制备方法 第6部分:拉挤模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding |
|||
GB/T 27797.7-2011 纤维增强塑料 试验板制备方法 第7部分:树脂传递模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding |
|||
GB/T 27797.8-2011 纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC |
|||
GB/T 27797.9-2011 纤维增强塑料 试验板制备方法 第9部分:GMT/STC模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC |
|||
GB/T 27797.1-2011 纤维增强塑料 试验板制备方法 第1部分:通则(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions |
|||
GB/T 28043-2011 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparisons |
|||
GB/T 26919-2011 选煤厂 煤泥水自然沉降试验方法(中英文版) Coal preparation plant - Methods for the natural falling testing of slurry |
|||
GB/T 26918-2011 选煤厂 煤的转筒泥化试验方法(中英文版) Coal preparation plant - Test methods for degradation in water of raw coal feed in drum |
|||
GB/T 26948.1-2011 工业车辆驾驶员约束系统技术要求及试验方法 第1部分:腰部安全带(中英文版) Industrial trucks - Specifications and test methods for operator restraint systems - Part 1:Lap-type seat belts |
|||
GB/T 26857.1-2011 信息技术 开放系统互连 测试方法和规范 (MTS) 测试和测试控制记法 第3版 第1部分:TTCN-3核心语言(中英文版) Methods for testing and specification (MTS)- The testing and test control notation version 3 - Part1:TTCN-3 core language |
|||
GB/T 26548.2-2011 手持便携式动力工具 振动试验方法 第2部分:气扳机、螺母扳手和螺丝刀(中英文版) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches,nutrunners and screwdrivers |
|||
GB/T 26599.1-2011 激光和激光相关设备 激光光束宽度、发散角和光束传输比的试验方法 第1部分:无像散和简单像散光束(中英文版) Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beam |
|||
GB/T 24218.8-2010 纺织品 非织造布试验方法 第8部分:液体穿透时间的测定(模拟尿液)(中英文版) Textiles - Test methods for nonwovens - Part 8:Determination of liquid strike-through time (simulated urine) |
|||
GB/T 24218.6-2010 纺织品 非织造布试验方法 第6部分:吸收性的测定(中英文版) Textiles - Test methods for nonwovens - Part 6:Absorption |
|||
GB/T 24218.3-2010 纺织品 非织造布试验方法 第3部分:断裂强力和断裂伸长率的测定(条样法)(中英文版) Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation (Strip method) |
|||
GB/T 24218.14-2010 纺织品 非织造布试验方法 第14部分:包覆材料返湿量的测定(中英文版) Textiles - Test methods for nonwovens - Part 14:Coverstock Wetback |
|||
GB/T 24218.13-2010 纺织品 非织造布试验方法 第13部分:液体多次穿透时间的测定(中英文版) Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time |
|||
GB/T 20875.2-2010 电气绝缘材料水解稳定性试验方法 第2部分:热固性模塑材料(中英文版) Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets |
|||
GB/T 1001.2-2010 标准电压高于1000V的架空线路绝缘子 第2部分:交流系统用绝缘子串及绝缘子串组 定义、试验方法和接收准则(中英文版) Insulators for overhead lines with a nominal voltage above 1000V - Part 2: Insulator strings and insulator sets for a.c.systems - Definitions, test methods and acceptance criteria |
|||
GB/T 7962.17-2010 无色光学玻璃测试方法 第17部分:紫外、红外折射率(中英文版) Colourless optical glass test methods - Part 17: Autocollimation test method for refractive index in the ultraviolet and infrared wave band |
|||
GB/T 7962.16-2010 无色光学玻璃测试方法 第16部分:线膨胀系数、转变温度和弛垂温度(中英文版) Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient,transformation temperature and yield point temperature |
|||
GB/T 12967.7-2010 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus |
|||
GB/T 25995-2010 精细陶瓷密度和显气孔率试验方法(中英文版) Test methods for density and apparent porostiy of fine ceramics |
|||
GB/T 24218.101-2010 纺织品 非织造布试验方法 第101部分:抗生理盐水性能的测定(梅森瓶法)(中英文版) Textiles - Test methods for nonwovens - Part 101: Saline repellency(Mason Jar Method) |
|||
GB/T 25774.3-2010 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验(中英文版) Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint |
|||
GB/T 25774.1-2010 焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验(中英文版) Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys |
|||
GB/Z 6113.405-2010 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分:不确定度、统计学和限值建模替换试验方法的使用条件(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
|||
GB/T 19902.4-2010 工业自动化系统与集成 制造软件互操作性能力建规 第4部分:一致性测试方法、判则及报告(中英文版) Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports |
|||
GB/T 25338.2-2010 铁路道岔转辙机 第2部分:试验方法(中英文版) Switch machine for railway - Part 2: Test methods |
|||
GB/T 17431.2-2010 轻集料及其试验方法 第2部分:轻集料试验方法(中英文版) Lightweight aggregates and its test methods - Part 2: Test methods for lightweight aggregates |
|||
GB/T 25217.2-2010 冲击地压测定、监测与防治方法 第2部分:煤的冲击倾向性分类及指数的测定方法(中英文版) Methods for test,monitoring and prevention of rock burst - Part 2: Classification and laboratory test method on bursting liability of coal |
|||
GB/T 25217.1-2010 冲击地压测定、监测与防治方法 第1部分:顶板岩层冲击倾向性分类及指数的测定方法(中英文版) Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata |
|||
GB/T 14634.2-2010 灯用稀土三基色荧光粉试验方法 第2部分:发射主峰和色度性能的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 2: Determination of emission dominantpeak and chromaticity |
|||
GB/T 14634.1-2010 灯用稀土三基色荧光粉试验方法 第1部分:相对亮度的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 1: Determination of relative brightness |
|||
GB/T 14634.3-2010 灯用稀土三基色荧光粉试验方法 第3部份:热稳定性的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 3: Determination of thermostability |
|||
GB/T 14634.5-2010 灯用稀土三基色荧光粉试验方法 第5部分:密度的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 5: Determination of density |
|||
GB/T 14634.6-2010 灯用稀土三基色荧光粉试验方法 第6部分:比表面积的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 6: Determination of specific surface area |
|||
GB/T 23595.7-2010 白光LED灯用稀土黄色荧光粉试验方法 第7部分:热猝灭性的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 7: Determination of temperature quenching |
|||
GB 12476.10-2010 可燃性粉尘环境用电气设备 第10部分:试验方法 粉尘与空气混合物最小点燃能量的测定方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 10: Test methods - Method for determining minimum ignition energy of dust/air mixtures |
|||
GB 12476.8-2010 可燃性粉尘环境用电气设备 第8部分: 试验方法 确定粉尘最低点燃温度的方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust |
|||
GB 12476.9-2010 可燃性粉尘环境用电气设备 第9部分:试验方法 粉尘层电阻率的测定方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 9: Test methods - Method for determining the electrical resistivity of dust in layers |
|||
GB/T 14634.7-2010 灯用稀土三基色荧光粉试验方法 第7部分:热猝灭性的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 7: Determination of temperature quenching |
找到:970條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |