中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 2423.43-2008 电工电子产品环境试验 第2部分:试验方法 振动、冲击和类似动力学试验样品的安装(中英文版) Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests |
|||
GB/T 9291-2008 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法(中英文版) Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions |
|||
GB/T 12605-2008 无损检测 金属管道熔化焊环向对接接头射线照相检测方法(中英文版) Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
|||
GB/T 21853-2008 化学品 分配系数(正辛醇-水) 摇瓶法试验(中英文版) Testing of chemicals - Partition coefficient(n-octanol/water)- Shake flask method |
|||
GB/T 21781-2008 化学品的熔点及熔融范围试验方法 毛细管法(中英文版) Test methods for melting point and melting range of chemical products - Capillary tube method |
|||
GB/T 21852-2008 化学品 分配系数(正辛醇-水) 高效液相色谱法试验(中英文版) Testing of chemicals - Partition coefficient(n-octanol/water)- High performance liquid chromatography(HPLC)method |
|||
GB/T 16267-2008 包装材料试验方法 气相缓蚀能力(中英文版) Test method of packaging materials - Vapors corrosion inhibiting ability |
|||
GB/T 21625-2008 危险品 极不敏感引爆物质的子弹撞击试验方法(中英文版) Dangerous goods - Bullet impact test method of extremely insensitive detonating substance |
|||
GB/T 21613-2008 危险品 自加速分解温度试验方法(中英文版) Dangerous goods - Test method for determination of the accelerating decomposition temperature |
|||
GB/T 15072.13-2008 贵金属合金化学分析方法 银合金中锡、铈和镧量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of tin , cerium and lanthanium contents for silver alloys - Inductively coupled clasma atomic emission spectrometry |
|||
GB/T 19198-2008 贵金属及其合金对铂、对铜热电动势的测量方法(中英文版) Testing method for thermo-electromotive force of precious metals and their alloys pair up with platinum or copper |
|||
GB/T 15072.1-2008 贵金属合金化学分析方法 金、铂、钯合金中金量的测定 硫酸亚铁电位滴定法(中英文版) Test method of precious alloys - Determination of gold content for gold, platinum and palladium alloys - Potentiometric titration using ferrous sulfate |
|||
GB/T 15072.17-2008 贵金属合金化学分析方法 铂合金中钨量的测定 三氧化钨重量法(中英文版) Test method of precious metal alloys - Determination of tungsten contents for platinum alloys - Tungstic acid gravimetry |
|||
GB/T 15072.3-2008 贵金属合金化学分析方法 金、铂、钯合金中铂量的测定 高锰酸钾电流滴定法(中英文版) Test method of precious metal alloys - Determination of platinum content for gold, platinum and palladium alloys - Electricity titration using potassium permanganate |
|||
GB/T 15072.6-2008 贵金属合金化学分析方法 铂、钯合金中铱量的测定 硫酸亚铁电流滴定法(中英文版) Test method of precious metal alloys - Determination of iridium contents for platinum, palladium alloys - Electricity titration with ferrous sulfate |
|||
GB/T 15078-2008 贵金属电触点材料接触电阻的测量方法(中英文版) Testing method for contact resistance of precious metals electrical contact materials |
|||
GB/T 18036-2008 铂铑热电偶细丝的热电动势测量方法(中英文版) The test method of thermo-emf for platinum |
|||
GB/T 11964-2008 石油沥青蒸发损失测定法(中英文版) Test method for loss on heating of asphalt |
|||
GB/T 11143-2008 加抑制剂矿物油在水存在下防锈性能试验法(中英文版) Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water |
|||
GB/T 5018-2008 润滑脂防腐蚀性试验法(中英文版) Standard test method for determining corrosion preventive properties of lubricating greases |
|||
GB/T 6072.1-2008 往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求(中英文版) Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use |
|||
GB/T 21405-2008 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求(中英文版) Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
|||
GB/T 8074-2008 水泥比表面积测定方法 勃氏法(中英文版) Testing method for specific surface of cement - Blaine method |
|||
GB/T 10339-2007 纸、纸板和纸浆的光散射和光吸收系数的测定(中英文版) Testing method of light scattering and absorption coefficient for paper,board and pulps |
|||
GB/T 10066.31-2007 电热装置的试验方法 第31部分:高频感应加热装置发生器输出功率的测定(中英文版) Test methods for electroheat installtions - Part 31: High-frequency induction heating installation- Test methods for the determination of power output of the generator |
|||
GB/T 1408.3-2007 绝缘材料电气强度试验方法 第3部分:1.2/50μs脉冲试验补充要求(中英文版) Electric strength of insulating materials test methods - Part 3: Additional requirements for 1,2/50μs impulse tests |
|||
GB/T 21216-2007 绝缘液体 测量电导和电容确定介质损耗因数的试验方法(中英文版) insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
|||
GB/T 3048.3-2007 电线电缆电性能试验方法 第3部分:半导电橡塑材料体积电阻率试验(中英文版) Test methods for electrical properties of electric cables and wires - Part 3:Test of volume resistivity of semi-conducting rubbers and plastics |
|||
GB/T 3137-2007 钽粉电性能试验方法(中英文版) Testing method for electrical properties of tantalum powder |
|||
GB/T 21196.1-2007 纺织品 马丁代尔法织物耐磨性的测定 第1部分:马丁代尔耐磨试验仪(中英文版) Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus |
|||
GB/T 21089.1-2007 建筑涂料水性助剂应用性能试验方法 第1部分:分散剂、消泡剂和增稠剂(中英文版) Testing method of application performance of waterborne additives for architectural coatings - part 1: Dispersing agent,Defoaming agent, Thickening agent |
|||
GB/T 6167-2007 尘埃粒子计数器性能试验方法(中英文版) Methods for testing the performance of airborne particle counter |
|||
GB/T 14985-2007 膨胀合金尺寸、外形、表面质量、试验方法和检验规则的一般规定(中英文版) General rules of dimensions, shape, surface, quality, testing method and inspection for expansion alloys |
|||
GB/T 11144-2007 润滑液极压性能测定法 梯姆肯法(中英文版) Standard test method for measurement of extreme-perssure prosperties of lubricating fluids - Timken method |
|||
GB/T 8243.11-2007 内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters |
|||
GB/T 8243.12-2007 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity |
|||
GB/T 20875.1-2007 电气绝缘材料水解稳定性的试验方法 第1部分:塑料薄膜(中英文版) Method of test the hydrolytic stability of electrical insulating materials - Part 1: Plastic films |
|||
GB/T 20829-2007 船舶固定式气溶胶灭火系统 性能要求和试验方法(中英文版) Performance requirements and test method of fixed aerosol fire extinguishing systems for ships |
|||
GB/T 8243.7-2006 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test |
|||
GB/T 20702-2006 气体灭火剂灭火性能测试方法(中英文版) Test method for extinguishing property of gaseous extinguishing agent |
|||
GB/T 20671.7-2006 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法(中英文版) Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials |
|||
GB/T 20671.10-2006 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法(中英文版) Classification system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials |
|||
GB/T 1408.2-2006 绝缘材料电气强度试验方法 第2部分:对应用直流电压试验的附加要求(中英文版) Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
|||
GB/T 1408.1-2006 绝缘材料电气强度试验方法 第1部分:工频下试验(中英文版) Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
|||
GB/T 20321.2-2006 离网型风能、太阳能发电系统用逆变器 第2部分:试验方法(中英文版) Inverter of wind and solar energy supply power system for off-grid - Part 2: Testing method |
|||
GB/T 20405.1-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH |
|||
GB/T 20405.2-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers |
|||
GB/T 20405.5-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution |
|||
GB/T 20405.4-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating |
|||
GB/T 20405.3-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation |
|||
GB/T 10581-2006 绝缘材料在高温下电阻和电阻率的试验方法(中英文版) Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
|||
GB/T 8243.6-2006 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test |
|||
GB/T 8243.5-2006 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test |
|||
GB/T 20064.2-2006 往复式内燃机 手柄起动装置 第2部分:脱开角试验方法(中英文版) Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement |
|||
GB/T 6242-2006 种植机械 马铃薯种植机 试验方法(中英文版) Equipment for planting - Potato planters - Method of testing |
|||
GB/T 19993-2005 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法(中英文版) Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling |
|||
GB/T 6973-2005 单粒(精密)播种机试验方法(中英文版) Testing methods of single seed drills(precision drills) |
|||
GB/T 19934.1-2005 液压传动 金属承压壳体的疲劳压力试验 第1部分:试验方法(中英文版) Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method |
|||
GB/T 5170.18-2005 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments |
|||
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
|||
GB/T 18570.3-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) |
|||
GB/T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments |
|||
GB/T 5170.19-2005 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments |
|||
GB/T 5170.17-2005 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments |
|||
GB 16155-2005 民用水暖煤炉热性能试验方法(中英文版) Test method for heating performance of civil water heating coal stove |
|||
GB/T 10901-2005 离心机 性能测试方法(中英文版) Methods of Performance testing for centrifuge |
|||
GB/T 5270-2005 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述(中英文版) Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion |
|||
GB/T 19789-2005 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法(中英文版) Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor |
|||
GB/T 6058-2005 纤维缠绕压力容器制备和内压试验方法(中英文版) Test method for preparation and internal pressure testing of filament-wound pressure vessels |
|||
GB/T 3857-2005 玻璃纤维增强热固性塑料耐化学介质性能试验方法(中英文版) Test method for chemical resistance of glass fiber reinforced thermosetting plastics |
|||
GB/T 5170.16-2005 电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test |
|||
GB/T 5170.15-2005 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test |
|||
GB/T 5170.13-2005 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test |
|||
GB/T 2423.53-2005 电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损(中英文版) Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands |
|||
GB/T 5822.2-2004 铁路内燃机车柴油机油 石油醚不溶物测定方法(中英文版) Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine |
|||
GB/T 7734-2004 复合钢板超声波检验方法(中英文版) Method for ultrasonic testing of clad steel plates |
|||
GB/T 19498-2004 农林拖拉机防护装置 静态试验方法和验收技术条件(中英文版) The static testing method and accepting technical comdition of the protective structures on agricultural and forestry tractors |
|||
GB/T 4104-2003 直接法氧化锌白度(颜色)检验方法(中英文版) Leucoscopic method for testing whiteness of zinc oxide made by direct process |
|||
GB/T 6554-2003 电气绝缘用树脂基反应复合物 第2部分:试验方法 电气用涂敷粉末方法(中英文版) Resin based reactive compounds used for electrical insulation--Part 2:Methods of test--Methods for coating pourders for electrical purposes |
|||
GB/T 19230.6-2003 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法)(中英文版) Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) |
|||
GB/T 19230.5-2003 评价汽油清净剂使用效果的试验方法 第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(Ford 2.3L方法)(中英文版) Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method) |
|||
GB/T 19230.4-2003 评价汽油清净剂使用效果的试验方法 第4部分: 汽油清净剂对汽油机进气系统沉积物(ISD)生成倾向影响的试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 4: Test method for influence of induction system deposit(ISD)tendencies of gasoline detergent |
|||
GB/T 19230.2-2003 评价汽油清净剂使用效果的试验方法 第2部分: 汽油清净剂破乳性能试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 2: Test method for demulsibility of gasoline detergent |
|||
GB/T 19230.1-2003 评价汽油清净剂使用效果的试验方法 第1部分:汽油清净剂防锈性能试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 1: Test method for rust-preventing characteristics of gasoline detergent |
|||
GB/T 19199-2003 半绝缘砷化镓单晶中碳浓度的红外吸收测试方法(中英文版) Test method for carbon concentration of semi-insulating monocrystal gallium arsenide by measurement infrared absorption method |
|||
GB 8058-2003 陶瓷烹调器铅、镉溶出量允许极限和检测方法(中英文版) Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware |
|||
GB/T 19138-2003 农药丙酮不溶物测定方法(中英文版) Testing method of in acetone material insolublefor pesticides |
|||
GB/T 19137-2003 农药低温稳定性测定方法(中英文版) Testing method for the storage stability at lowtemperature of pesticides |
|||
GB/T 19136-2003 农药热贮稳定性测定方法(中英文版) Testing method for the storage stability at elevated temperature of pesticides |
|||
GB/T 8243.4-2003 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法)(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method) |
|||
GB/T 8243.3-2003 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature |
|||
GB/T 8243.2-2003 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics |
|||
GB/T 8243.1-2003 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics |
|||
GB/T 10760.2-2003 离网型风力发电机组用发电机 第2部分: 试验方法(中英文版) Generator of off-grid wind turbines generator system--Part 2: Testing method |
|||
GB/T 6461-2002 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级(中英文版) Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests |
|||
GB/T 4336-2002 碳素钢和中低合金钢 火花源原子发射光谱分析方法(常规法)(中英文版) Standard testmethod for spark discharge atomic emission--Spectrometric analysis of carbon and low-alloy steel(routine method) |
|||
GB/T 12599-2002 金属覆盖层 锡电镀层 技术规范和试验方法(中英文版) Metallic coatings--Electroplated coatings of tin--Specification and test methods |
|||
GB/T 5406-2002 纸透油度的测定(中英文版) Testing method of oil permeance for paper |
|||
GB/T 11711-2002 船用自动雷达标绘仪(ARPA)性能要求、测试方法和要求的测试结果(中英文版) Marine automatic radar plotting aids(ARPA)--Performance requirements,methods of testing and required test results |
|||
GB/T 18708-2002 家用太阳热水系统热性能试验方法(中英文版) Test methods for thermal performance ofdomestic solar water heating systems |
|||
GB/T 18651-2002 牛无浆体病快速凝集检测方法(中英文版) The method of fast agglutination test for bovine anaplasmosis |
|||
GB/T 1600-2001 农药水分测定方法(中英文版) Testing method of water in pesticides |
|||
GB/T 5451-2001 农药可湿性粉剂润湿性测定方法(中英文版) Testing method for the wettability of dispersible powders of pesticides |
|||
GB/T 1602-2001 农药熔点测定方法(中英文版) Testing method of melting point for pesticides |
|||
GB/T 3385-2001 船用舷窗和矩形窗钢化安全玻璃 非破坏性强度试验 冲压法(中英文版) Shipbuilding and marine structures--Toughened safety glass panes for rectangular windows and side scuttles--Punch method of non-destructive strength testing |
|||
GB/T 18276-2000 汽车动力性台架试验方法和评价指标(中英文版) Test-bed methods and evaluating index of dynamic property for motor vehicles |
|||
GB/T 18271.3-2000 过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验(中英文版) Process measurement and control devices--General methods and procedures for evaluating performance--Part 3:Tests for the effects of influence quantities |
|||
GB/T 18214.1-2000 全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果(中英文版) Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards,methods of testing and required test results |
|||
GB/T 18148-2000 压实机械压实性能试验方法(中英文版) Testing method of the compaction performance of rollers and compactors |
|||
GB/T 4067-1999 金属材料电阻温度特征参数的测定(中英文版) Testing method for electrical resistance-temperature characteristic parameters of metallic materials |
|||
GB/T 11028-1999 测定浸渍剂对漆包线基材粘结强度的试验方法(中英文版) Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
|||
GB/T 17736-1999 激光防护镜主要参数测试方法(中英文版) Testing method of main parameters for laserprotective eyewear |
|||
GB/T 17711-1999 钇钡铜氧(123相)超导薄膜临界温度Tc的直流电阻试验方法(中英文版) The DC electric resistance test method for the critical temperature Tc of a YBa2Cu3O7-δ superconducting thin film |
|||
GB/T 12583-1998 润滑剂极压性能测定法(四球法)(中英文版) Standard test method for measurement of extreme-pressure properties of lubricating fluids(four-ball method) |
|||
GB/T 17603-1998 光解性塑料户外暴露试验方法(中英文版) Method for outdoor exposure testing of photodegradable plastics |
|||
GB/T 17476-1998 使用过的润滑油中添加剂元素、磨损金属和污染物以及基础油中某些元素测定法(电感耦合等离子体发射光谱法)(中英文版) Standard test method for determination of additiveelements,wear metals,and contaminants in used lubricanting oils and determination of selected elements in base oils by inductively coupled plasmaatomic emission spectrometry(ICP-AES) |
|||
GB/T 17391-1998 聚乙烯管材与管件热稳定性试验方法(中英文版) Test method for thermal stability of polyethylene pipes and fittings |
|||
GB/T 17170-1997 非掺杂半绝缘砷化镓单晶深能级EL2浓度红外吸收测试方法(中英文版) Test method for deep level EL2 concentration of undoped semiinsulating monocrystal gallium arsenide by measurement infra-red absorption method |
|||
GB/T 16906-1997 石油罐导静电涂料电阻率测定法(中英文版) Standard test methods for electrical resistivity of antistatic coating in petroleum tanks |
|||
GB/T 12307.3-1997 金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定(中英文版) Metalliccoatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3:Determination of the presence of residual salts |
|||
GB/T 12305.6-1997 金属覆盖层 金和金合金电镀层的试验方法 第六部分:残留盐的测定(中英文版) Metalliccoating--Test methods for electrodeposited gold and gold alloy coatings--Part 6:Determination of the presence of residual salts |
|||
GB/T 12840-1996 盒式磁带录音机运带机构可靠性要求和试验方法(中英文版) Reliability requirements and testing methods for tape transport mechanism of cassette tape recorders |
|||
GB/T 16665-1996 空气压缩机组及供气系统节能监测方法(中英文版) Monitoring and testing method for energy saving of air compressor unit and air distribution system |
|||
GB/T 16664-1996 企业供配电系统节能监测方法(中英文版) Monitoring and testing method for energy saving of power supply distribution system of industrial enterprise |
|||
GB/T 1425-1996 贵金属及其合金熔化温度范围的测定 热分析试验方法(中英文版) Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis |
|||
GB/T 16406-1996 声学 声学材料阻尼性能的弯曲共振测试方法(中英文版) Acoustics--Flexural resonancetesting method for damping properties of acoustical materials |
|||
GB/T 16310.1-1996 船舶散装运输液体化学品危害性评价规范 水生生物急性毒性试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Acute toxicity testing methods for aquatic organism |
|||
GB/T 16310.2-1996 船舶散装运输液体化学品危害性评价规范 水生生物积累性试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Bioaccumulation testing method for aquatic organism |
|||
GB/T 16310.3-1996 船舶散装运输液体化学品危害性评价规范 水生生物沾染试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Taint testing method for aquatic organism |
|||
GB/T 13823.17-1996 振动与冲击传感器的校准方法 声灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of acoustic sensitivity |
|||
GB/T 16168-1996 海洋结构物大气段用涂料加速试验方法(中英文版) Accelerated test methods for atmospheric surface coating systems for offshore structures |
|||
GB/T 15868-1995 全球海上遇险与安全系统(CMDSS) 船用无线电设备和海上导航设备通用要求测试方法和要求的测试结果(中英文版) Shipborne radio equipment forming part of the (globalmaritime distress and safety system) and marine navigational equipment--General require-ments,methods of testing and required test results |
|||
GB/T 15914-1995 蒸汽加热设备节能监测方法(中英文版) Monitoring and testing method for energy saving of steam heating equipments |
|||
GB/T 15780-1995 竹材物理力学性质试验方法(中英文版) Testing methods for physical and mechanical properties of bamboos |
|||
GB/T 5394-1995 油锯 林区生产试验方法(中英文版) Portable chain saws--Methods of production testin forest |
|||
GB/T 15662-1995 导电、防静电塑料体积电阻率测试方法(中英文版) Method of testing volume resistivity of conducting and antistatic plastics |
|||
GB/T 13823.16-1995 振动与冲击传感器的校准方法 温度响应比较测试法(中英文版) Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison |
|||
GB/T 13823.15-1995 振动与冲击传感器的校准方法 瞬变温度灵敏度测试法(中英文版) Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity |
|||
GB/T 11324-1995 139264kbit/s正码速调整四次群数字复用设备技术要求和测试方法(中英文版) Performance and test methods of the fourth order digital multiplex equimpent operatingat 139264 kbit/s and using positive justification |
|||
GB/T 9405-1995 34368kbit/s 正码速调整三次群数字复用设备技术要求和测试方法(中英文版) Performance and test methods of the third order digital multiplex equipment operating at 34368 kbit/s and using positive justification |
|||
GB/T 13823.12-1995 振动与冲击传感器的校准方法 安装在钢块上的无阻尼加速度计共振频率测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Resonance frequencytesting of undamped accelerometers on a steel block |
|||
GB/T 15479-1995 工业自动化仪表绝缘电阻、绝缘强度技术要求和试验方法(中英文版) Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments |
|||
GB/T 15333-1994 绝缘用胶粘带电腐蚀试验方法(中英文版) Test method for electrolysis corrosion of electrical insulating adhesive tapes |
|||
GB/T 15309-1994 船舶货舱温湿度仪技术要求及试验方法(中英文版) Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel |
|||
GB/T 13823.9-1994 振动与冲击传感器的校准方法 横向冲击灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of transverse shock sensitivity |
|||
GB 14861-1993 应用电视设备安全要求及试验方法(中英文版) Safety requirements and testing methodsfor equipments of applied TV |
|||
GB/T 14624.5-1993 油墨粘性检验方法(中英文版) Test method for tack of printing inks |
|||
GB/T 14624.6-1993 油墨粘性增值检验方法(中英文版) Test method for increase in value of tack of printing inks |
|||
GB/T 14235.2-1993 熔模铸造模料 抗弯强度测定方法(中英文版) Testing method for bending strength of pattern materials in investment casting |
|||
GB/T 14235.1-1993 熔模铸造模料 熔点测定方法(冷却曲线法)(中英文版) Testing method for melting point of pattern materials in investment casting |
找到:631條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |