中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 32065.19-2020 海洋仪器环境试验方法 第19部分:浸渍试验(中英文版) Environmental test methods for oceanographic instruments—Part 19 : Immersion test |
|||
GB/T 39269-2020 电压暂降/短时中断 低压设备耐受特性测试方法(中英文版) Voltage dip and short interruption—Immunity testing method for low voltage equipment |
|||
GB/T 39265-2020 道路车辆 盲区监测(BSD)系统性能要求及试验方法(中英文版) Road vehicles—Performance requirements and testing methods for blind spot detection (BSD) system |
|||
GB/T 39227-2020 1000 V以下敏感过程电压暂降免疫时间测试方法(中英文版) Immunity time testing method under voltage dip for sensitive process rated less than 1000 V |
|||
GB/T 32065.8-2020 海洋仪器环境试验方法 第8部分:温度变化试验(中英文版) Environmental test methods for oceanographic instruments—Part 8:Change of temperature test |
|||
GB/T 39282-2020 无损检测 电磁声换能器(EMAT)技术脉冲回波检测方法(中英文版) Non-destructive testing—Testing method for pulse-echo testing using electromagnetic acoustic transducer (EMAT) techniques |
|||
GB/T 39427-2020 无损检测 工业Ir192伽玛射线源尺寸测定方法(中英文版) Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source |
|||
GB/T 32065.10-2020 海洋仪器环境试验方法 第10部分:盐雾试验(中英文版) Environmental test methods for oceanographic instruments—Part 10:Salt fog test |
|||
GB/T 21838.1-2019 金属材料 硬度和材料参数的仪器化压入试验 第1部分:试验方法(中英文版) Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method |
|||
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法(切口试验)(中英文版) Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) |
|||
GB/T 13477.14-2019 建筑密封材料试验方法 第14部分:浸水及拉伸-压缩循环后粘结性的测定(中英文版) Test method for building sealants-Part 14:Determination of resistance to prolonged exposure to water |
|||
GB/T 10066.2-2019 电热和电磁处理装置的试验方法 第2部分:直接电弧炉(中英文版) Test methods for electroheating and electromagnetic processing installations—Part 2: Direct arc furnaces |
|||
GB/T 3903.41-2019 鞋类 帮面和衬里试验方法 耐折性能(中英文版) Footwear—Test methods for uppers and lining—Flex resistance |
|||
GB/T 25217.10-2019 冲击地压测定、监测与防治方法 第10部分:煤层钻孔卸压防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 10: Prevention method of drillhole destressing on coal-seam |
|||
GB/T 37890-2019 橡胶或塑料涂覆织物 芯吸性能测试方法(中英文版) Rubber-or plastics-coated fabrics—Test method for wicking of the cloth |
|||
GB/T 3903.43-2019 鞋类 帮面、衬里和内垫试验方法 缝合强度(中英文版) Footwear—Test methods for uppers,lining and insocks—Seam strength |
|||
GB/T 25217.11-2019 冲击地压测定、监测与防治方法 第11部分:煤层卸压爆破防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 11: Prevention method of destress blasting in coal seam |
|||
GB/T 25217.12-2019 冲击地压测定、监测与防治方法 第12部分:开采保护层防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 12: Prevention method of protective seam mining |
|||
GB/T 25217.7-2019 冲击地压测定、监测与防治方法 第7部分:采动应力监测方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 7: Monitoring method of mining-induced stress |
|||
GB/T 37730-2019 Linux服务器操作系统测试方法(中英文版) Test method for Linux server operating system |
|||
GB/T 37825-2019 建筑玻璃均布静载模拟风压试验方法(中英文版) Test method for simulating wind pressure resistance of building glass under the uniform static loads |
|||
GB/T 37841-2019 塑料薄膜和薄片耐穿刺性测试方法(中英文版) Test method for puncture resistance of plastic film and sheeting |
|||
GB/T 3903.39-2019 鞋类 帮面试验方法 层间剥离强度(中英文版) Footwear—Test methods for uppers—Delamination resistance |
|||
GB/T 37889-2019 橡胶或塑料涂覆织物 致液体污染性测试方法(中英文版) Rubber-or plastics-coated fabrics—Test method for liquid contamination |
|||
GB/T 13448-2019 彩色涂层钢板及钢带试验方法(中英文版) Test methods for prepainted steel sheet and strip |
|||
GB/T 37945-2019 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法(中英文版) Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC) |
|||
GB/T 37849-2019 液相色谱飞行时间质谱联用仪性能测定方法(中英文版) Method of performance testing for liquid chromatography tandem time of flight mass spectrometry |
|||
GB/T 21655.2-2019 纺织品 吸湿速干性的评定 第2部分: 动态水分传递法(中英文版) Textiles—Evaluation of absorption and quick-drying—Part 2:Method for moisture management tests |
|||
GB/T 3142-2019 润滑剂承载能力的测定 四球法(中英文版) Standard test method for determination of load-carrying capacity of lubricants—Four-ball method |
|||
GB/T 32065.9-2019 海洋仪器环境试验方法 第9部分:长霉试验(中英文版) Environmental test methods for oceanographic instruments—Part 14 : Vibration test |
|||
GB/T 32065.14-2019 海洋仪器环境试验方法 第14部分:振动试验(中英文版) Environmental test methods for oceanographic instruments—Part 15:Hydrostatic pressure test |
|||
GB/T 32065.15-2019 海洋仪器环境试验方法 第15部分:水压试验(中英文版) Environmental test methods for oceanographic instruments—Part 9:Mould test |
|||
GB/T 37160-2019 重质馏分油、渣油及原油中痕量金属元素的测定 电感耦合等离子体发射光谱法(中英文版) Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry(ICP-OES) |
|||
GB/T 37322-2019 汽油清净性评价 汽油机进气阀沉积物模拟试验法(中英文版) Test method for evaluating gasoline cleanliness—Simulation test of intake valve deposit (IVD) of gasoline engine |
|||
GB/T 37365-2019 压铸单元 性能检测方法(中英文版) Die casting unit—Performance testing method |
|||
GB/T 37417-2019 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果(中英文版) Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements,methods of testing and required test results |
|||
GB/T 12688.5-2019 工业用苯乙烯试验方法 第5部分:总醛含量的测定 滴定法(中英文版) Test method of styrene for industrial use—Part 5:Determination of the content of total aldehydes—Titrimetric method |
|||
GB/T 20114-2019 普通电源或整流电源供电直流电机的特殊试验方法(中英文版) Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
|||
GB/T 3903.33-2019 鞋类 内底和内垫试验方法 吸水率和解吸率(中英文版) Footwear—Test methods for insoles and insocks—Water absorption and desorption |
|||
GB/T 24113.2-2019 机械电气设备 塑料机械计算机控制系统 第2部分:试验与评价方法(中英文版) Electrical equipment of machines—Computer control systems for plastics machinery—Part 2:Test and evaluation method |
|||
GB/T 10066.1-2019 电热和电磁处理装置的试验方法 第1部分:通用部分(中英文版) Test methods for electroheating and electromagnetic processing installations—Part 1: General |
|||
GB/T 12688.1-2019 工业用苯乙烯试验方法 第1部分:纯度及烃类杂质的测定 气相色谱法(中英文版) Test method of styrene for industrial use—Part 1:Determination of purity and hydrocarbon impurities—Gas chromatography |
|||
GB/T 37946-2019 有机发光二极管显示器用材料热稳定性的测试方法(中英文版) Test method of thermal stability of materials for organic light emitting diode display (OLED) |
|||
GB/T 13477.13-2019 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定(中英文版) Test method for building sealants-Part 13:Determination of adhesion/cohesion properties at variable temperatures |
|||
GB/T 21839-2019 预应力混凝土用钢材试验方法(中英文版) Test methods of steel for prestressing concrete |
|||
GB/T 37616-2019 铝合金挤压型材轴向力控制疲劳试验方法(中英文版) Aluminium alloys extruded profiles-axial force controlled fatigue testing method |
|||
GB/T 37617-2019 纳滤膜表面Zeta电位测试方法 流动电位法(中英文版) Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement |
|||
GB/T 37619-2019 金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法(中英文版) Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes |
|||
GB/T 11026.10-2019 电气绝缘材料 耐热性 第10部分:利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则(中英文版) Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 38388-2019 建筑光伏幕墙采光顶检测方法(中英文版) Test method of solar PV system for curtain wall and skylight of building |
|||
GB/T 38426-2019 睡袋的热阻和使用温度的测定方法(中英文版) Test method for thermal resistance and use temperature of sleeping bags |
|||
GB/T 38430-2019 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法(中英文版) Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
|||
GB/T 7106-2019 建筑外门窗气密、水密、抗风压性能检测方法(中英文版) Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors |
|||
GB/T 15227-2019 建筑幕墙气密、水密、抗风压性能检测方法(中英文版) Test method of air permeability, watertightness, wind load resistance performance for curtain walls |
|||
GB/T 18802.351-2019 低压电涌保护器元件 第351部分:电信和信号网络的电涌隔离变压器(SIT)的性能要求和试验方法(中英文版) Components for low-voltage surge protective devices-Part 351:Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
|||
GB/T 22079-2019 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则(中英文版) HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria |
|||
GB/T 23711.1-2019 塑料衬里压力容器试验方法 第1部分:电火花试验(中英文版) Test method for pressure vessels lined with plastics—Part 1:Spark testing |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 38265.16-2019 软钎剂试验方法 第16部分:软钎剂润湿性能 润湿平衡法(中英文版) Test methods for soft soldering fluxes—Part 16:Flux efficacy test—Wetting balance method |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 23711.8-2019 塑料衬里压力容器试验方法 第8部分:耐高电阻试验(中英文版) Test method for pressure vessels lined with plastics—Part 8:High-resistance testing |
|||
GB/T 28043-2019 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparison |
|||
GB/T 38258-2019 信息技术 虚拟现实应用软件基本要求和测试方法(中英文版) Information technology—Virtual reality application software basic requirement and test method |
|||
GB/T 38264-2019 建筑幕墙耐撞击性能分级及检测方法(中英文版) Classification and test method of resistance against impact for curtain wall |
|||
GB/T 38265.1-2019 软钎剂试验方法 第1部分:不挥发物质含量的测定 重量法(中英文版) Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method |
|||
GB/T 38265.2-2019 软钎剂试验方法 第2部分:不挥发物质含量的测定 沸点法(中英文版) Test methods for soft soldering fluxes—Part 2: Determination of non-volatile matter—Ebulliometric method |
|||
GB/T 37949-2019 有机发光二极管显示器用有机小分子发光材料纯度测定 高效液相色谱法(中英文版) Purity test method of small molecule materials applied in organic light emitting diode display (OLED)—High performance liquid chromatography (HPLC) |
|||
GB/T 3903.42-2019 鞋类 帮面、衬里和内垫试验方法(中英文版) Footwear—Test methods for uppers,lining and insocks—Colour migration |
|||
GB/T 38302-2019 防护服装 热防护性能测试方法(中英文版) Protective clothing—Thermal protective performance test method |
|||
GB/T 38012-2019 鞋类 整鞋试验方法 缓震性能(中英文版) Footwear—Test methods for whole shoe—Impact shock attenuating property |
|||
GB/T 37977.23-2019 静电学 第2-3部分:防静电固体平面材料电阻和电阻率的测试方法(中英文版) Electrostatics—Part 2-3:Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 37977.32-2019 静电学 第3-2部分:静电效应的模拟方法 机器模型(MM)的静电放电试验波形(中英文版) Electrostatics—Part 3-2:Methods for simulation of electrostatic effects—Machine model(MM)electrostatic discharge test waveform |
|||
GB/T 38265.10-2019 软钎剂试验方法 第10部分:软钎剂润湿性能 铺展试验方法(中英文版) Test methods for soft soldering fluxes—Part 10:Flux efficacy test—Solder spread method |
|||
GB/T 38019-2019 工业用过滤布 粉尘过滤性能测试方法(中英文版) Industrial filter fabrics—Test method for dust filtration performance |
|||
GB 18296-2019 汽车燃油箱及其安装的安全性能要求和试验方法(中英文版) Safety property requirements and test methods for automobile fuel tank and its installation |
|||
GB/T 7106-2019 建筑外门窗气密、水密、抗风压性能检测方法(中英文版) Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors |
|||
GB/T 15227-2019 建筑幕墙气密、水密、抗风压性能检测方法(中英文版) Test method of air permeability, watertightness, wind load resistance performance for curtain walls |
|||
GB/T 18802.351-2019 低压电涌保护器元件 第351部分:电信和信号网络的电涌隔离变压器(SIT)的性能要求和试验方法(中英文版) Components for low-voltage surge protective devices-Part 351:Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
|||
GB/T 22079-2019 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则(中英文版) HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 38265.1-2019 软钎剂试验方法 第1部分:不挥发物质含量的测定 重量法(中英文版) Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method |
|||
GB/T 38302-2019 防护服装 热防护性能测试方法(中英文版) Protective clothing—Thermal protective performance test method |
|||
GB/T 38264-2019 建筑幕墙耐撞击性能分级及检测方法(中英文版) Classification and test method of resistance against impact for curtain wall |
|||
GB/T 38258-2019 信息技术 虚拟现实应用软件基本要求和测试方法(中英文版) Information technology—Virtual reality application software basic requirement and test method |
|||
GB/T 28043-2019 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparison |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 22798-2019 毛巾产品脱毛测试方法(中英文版) Test method for fiber shedding of towel products |
|||
GB/T 36655-2018 电子封装用球形二氧化硅微粉中α态晶体二氧化硅含量的测试方法 XRD法(中英文版) Test method for alpha crystalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method |
|||
GB/T 4060-2018 硅多晶真空区熔基硼检验方法(中英文版) Test method for boron content in polycrystalline silicon by vacuum zone-melting method |
|||
GB/T 36495-2018 烧结砖瓦原料物理性能试验方法(中英文版) Test method for physical properties of raw material of sintered brick and tile |
|||
GB/T 36874-2018 湿帘技术性能测试方法(中英文版) Test method for technical performance of cooling pad |
|||
GB/T 36695-2018 土方机械 液压挖掘机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for hydraulic excavator—Test methods |
|||
GB/T 36696-2018 土方机械 轮胎式装载机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for wheel loader —Test methods |
|||
GB/T 36694-2018 土方机械 履带式推土机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for tractor-dozer—Test methods |
|||
GB/T 3294-2018 鞋楦尺寸检测方法(中英文版) Test method of inspection for last sizes |
|||
GB/T 36613-2018 发光二极管芯片点测方法(中英文版) Probe test method for light emitting diode chips |
|||
GB/T 16155-2018 民用水暖煤炉性能试验方法(中英文版) Test method for performance of civil water heating coal stove |
|||
GB/T 16258-2018 棉纤维含糖试验方法 分光光度法(中英文版) Test method for sugar in cotton fibers—Spectrophotometry |
|||
GB/T 26857.4-2018 信息技术 开放系统互连 测试方法和规范(MTS) 测试和测试控制记法 第3版 第4部分:TTCN-3操作语义(中英文版) Information technology—Open systems interconnection—Methods for testing and specification(MTS)—The testing and test control notation—Version 3一Part 4: TTCN-3 operational semantics |
|||
GB/T 36585-2018 外墙外保温系统动态风压试验方法(中英文版) Method of dynamic wind uplift test for external thermal insulation composite systems |
|||
GB/T 36644-2018 信息安全技术 数字签名应用安全证明获取方法(中英文版) Information security technology—Methods for obtaining security attestations for digital signature applications |
|||
GB/T 17737.107-2018 同轴通信电缆 第1-107部分:电气试验方法 电缆颤噪电荷电平(机械感应噪声)试验(中英文版) Coaxial communication cables—Part 1-107: Electrical test methods—Test for cable microphony charge level (mechanically induced noise) |
|||
GB/T 36509-2018 滑翔伞结构强度要求及测试方法(中英文版) Requirements and testing methods of structure strength for paraglider |
|||
GB/T 4937.15-2018 半导体器件 机械和气候试验方法 第15部分:通孔安装器件的耐焊接热(中英文版) Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole mounted devices |
|||
GB/T 35843-2018 纤维增强混凝土及其制品的纤维含量试验方法(中英文版) Test method of fiber content of fiber reinforced concrete and its product |
|||
GB/T 5169.26-2018 电工电子产品着火危险试验 第26部分:烟模糊 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 26: Smoke obscuration—Summary and relevance of test methods |
|||
GB/T 17658-2018 阻燃木材燃烧性能试验 火传播试验方法(中英文版) Test of burning behavior for flame retardant treated wood—Method of test for fire propagation |
|||
GB/T 36422-2018 化学纤维 微观形貌及直径的测定 扫描电镜法(中英文版) Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method |
|||
GB/T 36598-2018 数字印刷 喷墨印刷图像质量属性的测试方法(中英文版) Digital printing—Test method for image quality attribute of inkjet printing |
|||
GB/T 36062-2018 数字印刷系统的使用要求及检验方法(中英文版) Use requirements and test methods for digital printing system |
|||
GB/T 1557-2018 硅晶体中间隙氧含量的红外吸收测量方法(中英文版) Test method for determining interstitial oxygen content in silicon by infrared absorption |
|||
GB/T 37052-2018 光伏建筑一体化(BIPV)组件电池额定工作温度测试方法(中英文版) Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules |
|||
GB/T 17737.316-2018 同轴通信电缆 第1-316部分:机械试验方法 电缆的最大抗拉力试验(中英文版) Coaxial communication cables—Part 1-316:echanical test methods—Test for maximum pulling force of cable |
|||
GB/T 36012-2018 锄草机器人性能规范及其试验方法(中英文版) Performance criteria and related test methods of mechanical weeding robots |
|||
GB/T 35856-2018 飞机电气设备绝缘电阻和耐电压试验方法(中英文版) Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment |
|||
GB/T 20485.33-2018 振动与冲击传感器校准方法 第33部分:磁灵敏度测试(中英文版) Methods for the calibration of vibration and shock transducers—Part 33: Testing of magnetic field sensitivity |
|||
GB/T 17737.102-2018 同轴通信电缆 第1-102部分:电气试验方法 电缆介质绝缘电阻试验(中英文版) Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable dielectric |
|||
GB/T 33842.5-2018 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第5部分:人脸图像数据(中英文版) Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 5: Face image data |
|||
GB/Z 6113.401-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模 标准化EMC试验的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests |
|||
GB/T 17737.314-2018 同轴通信电缆 第1-314部分:机械试验方法 电缆的弯曲试验(中英文版) Coaxial communication cables—Part 1-314: Mechanical test methods—Test for cable bending |
|||
GB/T 19973.2-2018 医疗器械的灭菌 微生物学方法 第2部分:用于灭菌过程的定义、确认和维护的无菌试验(中英文版) Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition,validation and maintenance of a sterilization process |
|||
GB/T 26548.1-2018 手持便携式动力工具 振动试验方法 第1部分:角式和端面式砂轮机(中英文版) Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 1:Angle and vertical grinders |
|||
GB/T 36011-2018 可编程序控制器抽样检查和例行试验方法(中英文版) Sampling check and routine test method for programmable controller |
|||
GB/T 20935.2-2018 金属材料 电磁超声检测方法 第2部分:利用电磁超声换能器技术进行超声检测的方法(中英文版) Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques |
|||
GB/T 14571.2-2018 工业用乙二醇试验方法 第2部分:纯度和杂质的测定 气相色谱法(中英文版) Test method of ethylene glycol for industrial use—Part 2: Determination of purity and impurities—Gas chromatography |
|||
GB/T 35804-2018 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法(中英文版) Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Test methods for determining the ozone concentration in laboratory test chambers |
|||
GB/T 36024-2018 金属材料 薄板和薄带 十字形试样双向拉伸试验方法(中英文版) Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece |
|||
GB/T 8243.15-2018 内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings |
|||
GB/T 35839-2018 无损检测 工业计算机层析成像(CT)密度测量方法(中英文版) Non-destructive testing—Test method for measuring industrial computed tomography (CT) density |
|||
GB/T 24218.15-2018 纺织品 非织造布试验方法 第15部分:透气性的测定(中英文版) Textiles—Test methods for nonwovens—Part 15: Determination of air permeability |
|||
GB/T 35937-2018 家用和类似用途饮用水处理装置性能测试方法(中英文版) Household and similar drinking water purifier performance test method |
|||
GB/T 8243.5-2018 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability |
|||
GB/T 35005-2018 集成电路倒装焊试验方法(中英文版) Test methods for flip chip integrated circuits |
|||
GB/T 37171-2018 含有菱形固体润滑剂的青铜板材技术要求和检验方法(中英文版) Specification and test methods for bronze plate containing diamond-shaped solid lubricant |
|||
GB/T 37174-2018 接入网设备测试方法-GPON系统互通性(中英文版) Test methods for access network—Interoperability of GPON system |
|||
GB/T 14235.2-2018 熔模铸造低温模料-第2部分:使用性能试验方法(中英文版) Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties |
|||
GB/T 26985-2018 原油倾点的测定(中英文版) Standard test method for pour point of crude oils |
|||
GB/T 2423.7-2018 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品)(中英文版) Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens |
|||
GB/T 7784-2018 机动往复泵试验方法(中英文版) Test methods for power reciprocating pump |
|||
GB/T 5170.16-2018 环境试验设备检验方法-第16部分:稳态加速度试验用离心机(中英文版) Inspection methods for environmental testing equipments—Part 16:Centrifugal machines for constant acceleration test |
|||
GB/T 5170.19-2018 环境试验设备检验方法-第19部分:温度、振动(正弦)综合试验设备(中英文版) Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment |
|||
GB/T 5170.15-2018 环境试验设备检验方法-第15部分:振动(正弦)试验用液压式振动系统(中英文版) Inspection methods for environmental testing equipments—Part 15:Hydraulic vibrating type system for vibration(sinusoidal) test |
找到:1007條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |