中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 12471-2009 产品几何技术规范(GPS) 木制件 极限与配合(中英文版) Geometrical product specifications(GPS) - Wooden part - Limit and fit |
|||
GB/T 3505-2009 产品几何技术规范(GPS) 表面结构 轮廓法 术语、定义及表面结构参数(中英文版) Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters |
|||
GB/T 1031-2009 产品几何技术规范(GPS) 表面结构 轮廓法 表面粗糙度参数及其数值(中英文版) Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values |
|||
GB/T 10610-2009 产品几何技术规范(GPS) 表面结构 轮廓法 评定表面结构的规则和方法(中英文版) Geometrical product specifications(GPS) - Surface texture:Profile method - Rules and procedures for the assessment of surface texture |
|||
GB/T 1800.1-2009 产品几何技术规范(GPS) 极限与配合 第1部分:公差、偏差和配合的基础(中英文版) Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits |
|||
GB/T 1800.2-2009 产品几何技术规范(GPS) 极限与配合 第2部分:标准公差等级和孔、轴极限偏差表(中英文版) Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts |
|||
GB/T 16671-2009 产品几何技术规范(GPS) 几何公差 最大实体要求、最小实体要求和可逆要求(中英文版) Geometrical product specifications(GPS) - Geometrical tolerancing - Maximum material requirement(MMR),least material requirement(LMR) and reciprocity requirement(RPR) |
|||
GB/T 18779.3-2009 产品几何技术规范(GPS) 工件与测量设备的测量检验 第3部分:关于对测量不确定度的表述达成共识的指南(中英文版) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
|||
GB/T 1801-2009 产品几何技术规范(GPS) 极限与配合 公差带和配合的选择(中英文版) Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits |
|||
GB/T 18342-2009 链条炉排锅炉用煤技术条件(中英文版) Specifications of coal for chain and travelling grate stoker boiler |
|||
GB/T 17796-2009 行政区域界线测绘规范(中英文版) Specifications for administrative boundary surveying and mapping |
|||
GB/T 22705-2008 童装绳索和拉带安全要求(中英文版) Safety specifications for cords and drawstrings on children’s clothing |
|||
GB/T 22717-2008 电机磁极线圈及磁场绕组匝间绝缘试验规范(中英文版) Test specifications of interturn insulation of field pole coil and field winding for electrical machines |
|||
GB/T 4393-2008 呆扳手、梅花扳手、两用扳手 技术规范(中英文版) Open end wrenches, box wrenches and combination wrenches - Technical specifications |
|||
GB 14196.1-2008 白炽灯安全要求 第1部分:家庭和类似场合普通照明用钨丝灯(中英文版) Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
|||
GB 14196.2-2008 白炽灯安全要求 第2部分:家庭和类似场合普通照明用卤钨灯(中英文版) Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
|||
GB 17790-2008 家用和类似用途空调器安装规范(中英文版) Installation specifications for household and similar air-conditioning |
|||
GB/T 7025.2-2008 电梯主参数及轿厢、井道、机房的型式与尺寸 第2部分:Ⅳ类电梯(中英文版) Lifts - Main specifications and the dimensions arrangements for its cars, wells and machine rooms - Part 2: Lifts of class Ⅳ |
|||
GB/T 7025.1-2008 电梯主参数及轿厢、井道、机房的型式与尺寸 第1部分:Ⅰ、Ⅱ、Ⅲ、Ⅵ类电梯(中英文版) Lifts - Main specifications and the dimensions, arrangements for its cars, wells and machine rooms - Part 1: Lifts of classesⅠ、Ⅱ、Ⅲ、Ⅵ |
|||
GB/T 10151-2008 医用诊断X射线设备高压电缆插头、插座技术条件(中英文版) Medical diagnostic X-ray equipment - Specifications for high voltage cable plugs and sockets |
|||
GB/T 22404-2008 摄影 加工用化学品 无水碳酸钠和一水合碳酸钠(中英文版) Photography - Processing chemicals - Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate |
|||
GB/T 22402-2008 摄影 加工用化学品 无水硫代硫酸钠和五水合硫代硫酸钠(中英文版) Photography - Processing chemicals - Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate |
|||
GB/T 12001.1-2008 塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications |
|||
GB/T 22352-2008 土方机械 吊管机 术语和商业规格(中英文版) Earth-moving machinery - Pipelayers - Terminology and commercial specifications |
|||
GB/T 10417-2008 碳化钨钢结硬质合金技术条件及其力学性能的测试方法(中英文版) Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness |
|||
GB/T 5837-2008 液力偶合器 型式和基本参数(中英文版) Fluid coupling - Types and basic specifications |
|||
GB/T 7497.1-2008 微处理器系统总线 8位及16位数据(MULTIBUS I) 第1部分: 电气与定时规范的功能描述(中英文版) Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 1: Functional description with electrical and timing specifications |
|||
GB/T 3403.1-2008 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料(UF-和UF/MF-PMCs) 第1部分: 命名系统和分类基础(中英文版) Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF-and UF/MF-PMCs)- Part 1: Designation system and basis for specifications |
|||
GB/T 22271.1-2008 塑料 聚甲醛(POM)模塑和挤塑材料 第1部分:命名系统和分类基础(中英文版) Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 1404.1-2008 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范(中英文版) Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications |
|||
GB/T 12010.1-2008 塑料 聚乙烯醇材料(PVAL) 第1部分:命名系统和分类基础(中英文版) Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: Designation system and basis for specifications |
|||
GB/T 21460.1-2008 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 20417.1-2008 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 21461.1-2008 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 18964.1-2008 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Impact-resistant Polystyrene (PS-I) moulding and extrusion materials -Part 1: Designation system and basis for specifications |
|||
GB/T 600-2008 船舶管路阀件通用技术条件(中英文版) General specifications for marine piping valves and fittings |
|||
GB/T 10319-2008 船舶用气动测量和控制仪表 通用技术条件(中英文版) General specifications for marine pneumatic measurement and control instruments |
|||
GB/T 13384-2008 机电产品包装通用技术条件(中英文版) General specifications for packing of mechanical and electrical product |
|||
GB/T 1592.1-2008 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分:通用要求、安全要求、防护罩尺寸和空隙范围(中英文版) Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone |
|||
GB/T 18316-2008 数字测绘成果质量检查与验收(中英文版) Specifications for inspection and acceptance of quality of digital surveying and mapping achievements |
|||
GB/T 22076-2008 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验(中英文版) Pneumatic fluid power - Cylindrical quick-action couplings - Plug connecting dimensions, specifications, application guidelines and testing |
|||
GB 22128-2008 报废汽车回收拆解企业技术规范(中英文版) Technical specifications for End-of-Life Vehicles recycling and dismantling enterprise |
|||
GB/T 1631-2008 离子交换树脂命名系统和基本规范(中英文版) Designation system and basis for specifications of ion exchange resins |
|||
GB/T 8355-2008 船舶用电动测量和控制仪表 通用技术条件(中英文版) General specifications for marine electrical measurement and control instruments |
|||
GB/T 16657.2-2008 工业通信网络 现场总线规范 第2部分: 物理层规范和服务定义(中英文版) Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
|||
GB/T 22072-2008 干式非晶合金铁心配电变压器技术参数和要求(中英文版) Specifications and technical requirements for dry-type amorphous alloy core distribution transformers |
|||
GB/T 17160-2008 1:500 1:1 000 1:2 000地形图数字化规范(中英文版) Specifications for digitizing 1:500 1:1 000 and 1:2 000 topographic maps |
|||
GB/T 13694-2008 α、β和γ平面标准源通用技术条件(中英文版) General Specifications for α,βand γ Planar standard sources |
|||
GB/T 10077-2008 锂原电池分类、型号命名及基本特性(中英文版) Classification, designation nomenclature and basic specifications for lithium primary batteries |
|||
GB/T 11805-2008 水轮发电机组自动化元件(装置)及其系统基本技术条件(中英文版) Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets |
|||
GB 14196.3-2008 白炽灯 安全要求 第3部分:卤钨灯(非机动车辆用)(中英文版) Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
|||
GB/T 21955-2008 农林拖拉机和机械 纸基摩擦片 技术条件(中英文版) Tractors and machinery for agriculture and forestry - Paper friction disc - Technical specifications |
|||
GB/T 10168-2008 土方机械 挖掘装载机 术语和商业规格(中英文版) Earth-moving machinery - Backhoe loaders - Definitions and commercial specifications |
|||
GB/T 15972.10-2008 光纤试验方法规范 第10部分:测量方法和试验程序 总则(中英文版) Specifications for optical fibre test methods - Part 10: Measurement methods and test procedures - General and guidance |
|||
GB/T 15972.40-2008 光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减(中英文版) Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation |
|||
GB/T 15972.30-2008 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版) Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test |
|||
GB/T 15972.50-2008 光纤试验方法规范 第50部分:环境性能的测量方法和试验程序 恒定湿热(中英文版) Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) |
|||
GB/T 15972.20-2008 光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版) Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry |
|||
GB/T 18838.4-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸(中英文版) Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot |
|||
GB/T 18838.3-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂(中英文版) Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit |
|||
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义(中英文版) Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|||
GB/T 15972.42-2008 光纤试验方法规范 第42部分:传输特性和光学特性的测量方法和试验程序 波长色散(中英文版) Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion |
|||
GB/T 15972.53-2008 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水(中英文版) Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water immersion |
|||
GB/T 15972.21-2008 光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数(中英文版) Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry |
|||
GB/T 15972.22-2008 光纤试验方法规范 第22部分:尺寸参数的测量方法和试验程序 长度(中英文版) Specifications for optical fibre test methods - Part 22: Measurement methods and test procedures for dimensions - Length measurement |
|||
GB/T 15972.31-2008 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength |
|||
GB/T 15972.32-2008 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability |
|||
GB/T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版) Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
|||
GB/T 15972.34-2008 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲(中英文版) Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical characteristics - Fibre curl |
|||
GB/T 15972.41-2008 光纤试验方法规范 第41部分:传输特性和光学特性的测量方法和试验程序 带宽(中英文版) Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth |
|||
GB/T 15972.43-2008 光纤试验方法规范 第43部分:传输特性和光学特性的测量方法和试验程序 数值孔径(中英文版) Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture |
|||
GB/T 15972.44-2008 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长(中英文版) Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength |
|||
GB/T 15972.45-2008 光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序 模场直径(中英文版) Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter |
|||
GB/T 15972.46-2008 光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化(中英文版) Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance |
|||
GB/T 15972.47-2008 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss |
|||
GB/T 15972.49-2008 光纤试验方法规范 第49部分:传输特性和光学特性的测量方法和试验程序-微分模时延(中英文版) Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay |
|||
GB/T 15972.52-2008 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环(中英文版) Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature |
|||
GB/T 15972.54-2008 光纤试验方法规范 第54部分:环境性能的测量方法和试验程序 伽玛辐照(中英文版) Specifications for optical fibre test methods - Part 54: Measurement methods and test procedures for environmental characteristics - Gamma irradiation |
|||
GB/T 15972.51-2008 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热(中英文版) Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental characteristics - Dry heat |
|||
GB/T 4219.1-2008 工业用硬聚氯乙烯(PVC-U)管道系统 第1部分:管材(中英文版) Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes |
|||
GB/T 1182-2008 产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注(中英文版) Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out |
|||
GB/T 7403.2-2008 牵引用铅酸蓄电池 第2部分: 产品品种和规格(中英文版) Lead-acid traction batteries - Part 2: Product types and specifications |
|||
GB/T 21291-2007 鱼糜加工机械安全卫生技术条件(中英文版) Technical specifications of safety and sanitation for surimi processing machinery |
|||
GB/T 21204.1-2007 用于严酷环境的数字通信用对绞或星绞多芯对称电缆 第1部分:总规范(中英文版) Multicore and symmetrical pair/quad cables for digitai communications to be used in harsh environments-Part 1:Generic specifications |
|||
GB/T 778.1-2007 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第1部分:规范(中英文版) Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications |
|||
GB/T 12763.8-2007 海洋调查规范 第8部分: 海洋地质地球物理调查(中英文版) Specifications for oceanographic survey - Part 8:marine geology and geophysics survey |
|||
GB/T 12763.5-2007 海洋调查规范 第5部分: 海洋声、光要素调查(中英文版) Specifications for oceanographic survey - Part 5: Survey of acoustical and optical parameters in the sea |
|||
GB/T 6139-2007 阶梯麻花钻 技术条件(中英文版) Subland twist drills - Technical specifications |
|||
GB/T 5343.2-2007 可转位车刀及刀夹 第2部分:可转位车刀型式尺寸和技术条件(中英文版) Turning tool holders and cartridges for indexable inserts - Part 2: Dimensions and technical specifications of turning tool holders for indexable inserts |
|||
GB/T 1124.2-2007 凸凹半圆铣刀 第2部分: 技术条件(中英文版) Convex and concave milling cutters - Part 2:Technical specifications |
|||
GB 5085.7-2007 危险废物鉴别标准 通则(中英文版) Identification standards for hazardous wastes - General specifications |
|||
GB/T 20789-2006 收获和贮存机械 圆捆打捆机 术语和商用规范(中英文版) Equipment for harvesting and conservation - Round balers - Terminology and commercial specifications |
|||
GB/T 7920.11-2006 道路施工与养护设备 沥青混合料搅拌设备 术语和商业规格(中英文版) Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications |
|||
GB/T 7920.10-2006 道路施工与养护设备 稳定土拌和机 术语和商业规格(中英文版) Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications |
|||
GB/T 13154-2006 电视用彩色电影拷贝和幻灯片的密度规范(中英文版) Cinematography - Colour motion-picture prints and slides for television-density specifications |
|||
GB/T 20562-2006 演播室串行数字信号抖动技术参数与测量方法(中英文版) Technical specifications and methods of measurement for jitter of bit-serial digital signals used in studio |
|||
GB/T 20441.4-2006 测量传声器 第4部分: 工作标准传声器规范(中英文版) Measurement microphones―Part 4: Specifications for working standard microphones |
|||
GB/T 20315-2006 道路施工与养护设备 路面铣刨机 术语和商业规格(中英文版) Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications |
|||
GB/T 20339-2006 农业拖拉机和机械 固定在拖拉机上的传感器联接装置 技术规范(中英文版) Agricultural tractors and machinery - Tractor-mounted sensor interface - Specifications |
|||
GB/T 16857.6-2006 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定(中英文版) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features |
|||
GB/T 16857.2-2006 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量尺寸的坐标测量机(中英文版) Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size |
|||
GB 20300-2006 道路运输爆炸品和剧毒化学品车辆安全技术条件(中英文版) Safety specifications for road transportation vehicle of explosive substance and chemical toxic substance |
|||
GB/T 20420-2006 润滑剂、工业用油和相关产品(L类)-E组(内燃机油)-二冲程汽油发动机油(EGB、EGC和EGD)(中英文版) Lubricants, industrial oils and related products (class L)-Family E (internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
|||
GB/T 20457-2006 林业机械 轮式集材机 术语、定义和商品规格(中英文版) Machinery for forestry―Wheeled skidders―Terms,definitions and commercial specifications |
|||
GB/T 20455-2006 林业机械 集运机 术语、定义和商品规格(中英文版) Machinery for forestry―Forwarders―Terms,definitions and commercial specifications |
|||
GB/T 20447-2006 林业机械 伐木归堆机 术语、定义和商品规格(中英文版) Machinery for forestry―Feller-bunchers―Terms,definitions and commercial specifications |
|||
GB/T 15405-2006 被动式太阳房热工技术条件和测试方法(中英文版) Thermal specifications and testing method for passive solar houses |
|||
GB/T 13923-2006 基础地理信息要素分类与代码(中英文版) Specifications for feature classification and codes of fundamental geographic information |
|||
GB/T 12897-2006 国家一、二等水准测量规范(中英文版) Specifications for the first and second order leveling |
|||
GB/T 10590-2006 高低温/ 低气压试验箱技术条件(中英文版) Specifications for high and low temperature/low air pressure testing chambers |
|||
GB 10810.3-2006 眼镜镜片及相关眼镜产品 透射比规范及测量方法(中英文版) Spectacle lenses and related eye wear―Transmittance specifications and test methods |
|||
GB/T 20164-2006 传染病暴发流行期间疫区邮件及处理系统预防控制规范(中英文版) Prevention and control specifications for mail and mail handling systems in the area of when epidemics breakout |
|||
GB/T 12668.4-2006 调速电气传动系统 第4部分:一般要求 交流电压1000V以上但不超过35kV的交流调速电气传动系统额定值的规定(中英文版) Adjustable speed electrical power drive systems - part 4: General requirements - Rating specifications for a.c. power drive systems above 1000V a.c. and not exceeding 35kV |
|||
GB 20262-2006 焊接、切割及类似工艺用气瓶减压器安全规范(中英文版) Safety specifications of regulators for welding, cutting and the similar processes |
|||
GB/T 15629.1103-2006 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:附加管理域操作规范(中英文版) Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Specification |
|||
GB 15629.1104-2006 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4GHz频段更高数据速率扩展规范(中英文版) Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Further Higher |
|||
GB 15629.1101-2006 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:5.8GHz频段高速物理层扩展规范(中英文版) Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: High-Speed Phy |
|||
GB/T 2546.1-2006 塑料 聚丙烯(PP〕模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics―Polypropylene(PP) moulding and extrusion materials―Part 1: Designation system and basis for specifications |
|||
GB 20031-2005 泡沫灭火系统及部件通用技术条件(中英文版) General technical specifications for foam fire extinguishing systems and components |
|||
GB/T 19931-2005 土方机械 挖沟机 术语和商业规范(中英文版) Earth-moving machinery-Trenchers-Definitions and commercial specifications |
|||
GB/T 2940-2005 柴油机用喷油泵、调速器、喷油器弹簧技术条件(中英文版) Technical specifications of springs for fuel pump,governor and injecter of diesel engines |
|||
GB/T 7920.6-2005 建筑施工机械与设备 打桩设备 术语和商业规格(中英文版) Building construction machinery and equipment Piling equipment Terminology and commercial specifications |
|||
GB/T 19765-2005 产品几何量技术规范(GPS)--产品几何量技术规范和检验的标准参考温度(中英文版) Geometrical Product Specifications(GPS)-Standard reference temperature for geometrical product specification and verification |
|||
GB/T 13984-2005 缩微摄影技术 银盐、重氮和微泡拷贝片 视觉密度 技术规范和测量(中英文版) Micrographics-Duplicating film,silver,diazo and vesicular-Visual density-Specifications and measurement |
|||
GB/T 19067.2-2004 产品几何量技术规范(GPS) 表面结构 轮廓法测量标准 第2部分:软件测量标准(中英文版) Geometrical Product Specifications(GPS)--Surface texture:Profile method--Measurement standards--Part 2:Software measurement standards |
|||
GB/T 18779.2-2004 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南(中英文版) Geometrical Product Specifications(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification |
|||
GB/T 16857.5-2004 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机(中英文版) Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems |
|||
GB/T 7234-2004 产品几何量技术规范(GPS) 圆度测量 术语、定义及参数(中英文版) Geometrical Product Specifications(GPS)--Measurement of roundness--Terms,definitions and parameters of roundness |
|||
GB/T 19558-2004 集成电路(IC)卡公用付费电话系统总技术要求(中英文版) General specifications for integrated circuit(IC)card payphone and system |
|||
GB/T 19523-2004 缩微摄影技术 16mm与35mm 缩微胶片防光片盘与片盘 技术规范(中英文版) Micrographics--16mm and 35mm microfilm spools and reels--Specifications |
|||
GB/T 19526-2004 羊寄生虫病防治技术规范(中英文版) Technical specifications for prevention and cure of sheep parasitosis |
|||
GB/T 6340-2004 直柄反燕尾槽铣刀和直柄燕尾槽铣刀 技术条件(中英文版) Inverse dovetail cutters and dovetail cutters with cylindrical shanks--Technical specifications |
|||
GB/T 7920.16-2004 道路施工与养护设备 石屑撒布机 术语和商业规格(中英文版) Road construction and maintenance equipment--Chippings spreaders--Terminology and commercial specifications |
|||
GB/T 7920.14-2004 道路施工与养护设备 沥青洒布车/喷洒机 术语和商业规格(中英文版) Road construction and maintenance equipment--Bituminous binder spreaders/sprayers--Terminology and commercial specifications |
|||
GB/T 7920.9-2003 土方机械 平地机 术语和商业规格(中英文版) Earth-moving machinery--Graders--Terminology and commercial specifications |
|||
GB/T 7920.8-2003 土方机械 铲运机 术语和商业规格(中英文版) Earth-moving machinery--Scrapers--Terminology and commercial specifications |
|||
GB/T 8606-2003 液压快换接头 螺纹连接尺寸及技术要求(中英文版) Thread connectiong dimensions andspecifications of hydraulic fluid power--Quick action couplings |
|||
GB/T 6850-2003 电影 电影生胶片和涂磁胶片片盒标签 最低限度内容规定(中英文版) Cinematography--Labelling of containers for raw-stock motion-picture films and magnetic films--Minimum information specifications |
|||
GB/T 19360-2003 工业用金属穿孔板 技术要求和检验方法(中英文版) Industrial plate screens--Specifications and test methods |
|||
GB/T 9185-2003 摄影师 135规格胶片和暗盒 规范(中英文版) Photography--135-size film and magazine--Specifications |
|||
GB/T 16829-2003 信息技术 自动识别与数据采集技术 条码码制规范 交插二五条码(中英文版) Information technology--Automatic identification and data capture techniques--Bar code symbology specifications--Interleaved 2 of 5 |
|||
GB/T 6160-2003 缩微摄影技术 源文件第一代银--明胶型缩微品密度规范与测量方法(中英文版) Micrographics--First generation silver-gelatin microforms of source documents--Density specifications and method of measurement |
|||
GB 15629.11-2003 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范(中英文版) Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) andPhysical Layer(PHY) Specifications |
|||
GB 15629.1102-2003 信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4 GHz频段较高速物理层扩展规范(中英文版) Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer(PHY) Specifications: Higher-Speed Physi |
|||
GB/T 19067.1-2003 产品几何量技术规范(GPS) 表面结构 轮廓法 测量标准 第1部分:实物测量标准(中英文版) Geometrical Product Specifications(GPS)--Surface texture: Profile method--Measurement standards--Part 1: Material measures |
|||
GB/T 19064-2003 家用太阳能光伏电源系统技术条件和试验方法(中英文版) Solar home system specifications and test procedure |
|||
GB/T 18780.2-2003 产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸(中英文版) Geometrical Product Specifications(GPS)--Geometrical features--Part 2: Extracted median line of a cylinder and a cone,extracted median surface,local size of an extracted feature |
|||
GB/T 12472-2003 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值(中英文版) Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness parameters and their values for wooden pieces |
|||
GB/T 16857.4-2003 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机(中英文版) Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode |
|||
GB/T 18995-2003 电影摄影术 在16mm、35mm和65mm电影胶片上由制造厂印制的潜影标识 规范和尺寸(中英文版) Cinematography--Manufacturer-printed,latent image identification on 16mm,35mm and 65mm motion-picture film--Specifications and dimensions |
找到:653條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |