中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
 |
GB/T 24817.3-2009 起重机械 控制装置布置形式和特性 第3部分：塔式起重机（中英文版） Cranes - Controls - Layout and characteristics - Part 3: Tower cranes |
 |
|
|
|
GB/T 24817.1-2009 起重机械 控制装置布置形式和特性 第1部分：总则（中英文版） Lifting appliances - Controls - Layout and characteristics - Part 1: General principles |
|
|
|
|
GB/T 24611-2009 滚动轴承 损伤和失效 术语、特征及原因（中英文版） Rolling bearings - Damage and failures - Terms，characteristics and causes |
|
|
|
|
GB/T 16762-2009 一般用途钢丝绳吊索特性和技术条件（中英文版） Wire rope slings for general purposes-characteristics and technical requirements |
|
|
|
|
GB/T 15972.55-2009 光纤试验方法规范 第55部分：环境性能的测量方法和试验程序-氢老化（中英文版） Specifications for optical fibre test methods - Part 55: Measurement methods and test procedures for environmental characteristics-hydrogen aging |
|
|
|
|
GB/T 3685-2009 输送带 实验室规模的燃烧特性 要求和试验方法（中英文版） Conveyor belts - Laboratory scale flammability characteristics -Requirements and test method |
|
|
|
|
GB/T 22838.16-2009 卷烟和滤棒物理性能的测定 第16部分：卷烟 端部掉落烟丝的测定 旋转笼法（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage |
|
|
|
|
GB/T 22838.11-2009 卷烟和滤棒物理性能的测定 第11部分：卷烟熄火（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 11: Cigarettes extinguish |
|
|
|
|
GB/T 22838.1-2009 卷烟和滤棒物理性能的测定 第1部分：卷烟包装和标识（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 1: Cigarettes packing and mark |
|
|
|
|
GB/T 22838.12-2009 卷烟和滤棒物理性能的测定 第12部分：卷烟外观（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 12: Cigarettes appearance |
|
|
|
|
GB/T 22838.15-2009 卷烟和滤棒物理性能的测定 第15部分：卷烟 通风的测定 定义和测量原理（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 15: Cigarettes - Determination of ventilation - Definitions and measurement principles |
|
|
|
|
GB/T 22838.14-2009 卷烟和滤棒物理性能的测定 第14部分：滤棒外观（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 14: Filter rods appearance |
|
|
|
|
GB/T 22838.10-2009 卷烟和滤棒物理性能的测定 第10部分：爆口（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 10: Open seam |
|
|
|
|
GB/T 22838.3-2009 卷烟和滤棒物理性能的测定 第3部分：圆周 激光法（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 3: Circumference - Laser method |
|
|
|
|
GB/T 22838.13-2009 卷烟和滤棒物理性能的测定 第13部分：滤棒圆度（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 13: Filter rods roundness |
|
|
|
|
GB/T 22838.4-2009 卷烟和滤棒物理性能的测定 第4部分：卷烟质量（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 4: Cigarettes weight |
|
|
|
|
GB/T 22838.5-2009 卷烟和滤棒物理性能的测定 第5部分：卷烟吸阻和滤棒压降（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 5: Cigarettes draw resistance and filter rods pressure drop |
|
|
|
|
GB/T 22838.6-2009 卷烟和滤棒物理性能的测定 第6部分：硬度（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 6: Hardness |
|
|
|
|
GB/T 22838.7-2009 卷烟和滤棒物理性能的测定 第7部分：卷烟含末率（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 7: Cigarettes dust content |
|
|
|
|
GB/T 22838.8-2009 卷烟和滤棒物理性能的测定 第8部分：含水率（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 8: Moisture |
|
|
|
|
GB/T 22838.9-2009 卷烟和滤棒物理性能的测定 第9部分：卷烟空头（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 9: Cigarettes loose end |
|
|
|
|
GB/T 22838.2-2009 卷烟和滤棒物理性能的测定 第2部分：长度 光电法（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 2: Length - Photoelectricity method |
|
|
|
|
GB/T 18441-2009 港口起重机 供需文件（中英文版） Harbour crane - Technical characteristics and acceptance documents |
|
|
|
|
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
|
|
|
|
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|
|
|
|
GB 17509-2008 汽车及挂车转向信号灯配光性能（中英文版） Photometric characteristics of direction indicators for motor vehicles and their trailers |
|
|
|
|
GB 11554-2008 机动车和挂车用后雾灯配光性能（中英文版） Photometric characteristics of rear fog lamp for power-driven vehicles and their trailers |
|
|
|
|
GB 5920-2008 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能（中英文版） Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers |
|
|
|
|
GB/T 3903.27-2008 鞋类 主跟和包头试验方法 机械性能（中英文版） Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics |
|
|
|
|
GB/T 22789.1-2008 硬质聚氯乙烯板材 分类、尺寸和性能 第1部分：厚度1mm以上板材（中英文版） Plastics - Unplasticized poly(vinyl chloride)sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm |
|
|
|
|
GB/T 22417-2008 叉车 货叉叉套和伸缩式货叉 技术性能和强度要求（中英文版） Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements |
|
|
|
|
GB/T 9771.3-2008 通信用单模光纤 第3部分：波长段扩展的非色散位移单模光纤特性（中英文版） Single-mode optical fibres for telecommunication - Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre |
|
|
|
|
GB/T 9771.6-2008 通信用单模光纤 第6部分：宽波长段光传输用非零色散单模光纤特性（中英文版） Single-mode optical fibres for telecommunication - Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport |
|
|
|
|
GB 9254-2008 信息技术设备的无线电骚扰限值和测量方法（中英文版） Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
|
|
|
|
GB/T 13304.2-2008 钢分类 第2部分：按主要质量等级和主要性能或使用特性的分类（中英文版） Steels classification - Part 2: Classification of according to main quality classes and main property or application characteristics |
|
|
|
|
GB/T 2408-2008 塑料 燃烧性能的测定 水平法和垂直法（中英文版） Plastics - Determination of burning characteristics - Horizontal and vertical test |
|
|
|
|
GB/T 2407-2008 塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定（中英文版） Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod |
|
|
|
|
GB/T 1844.1-2008 塑料 符号和缩略语 第1部分: 基础聚合物及其特征性能（中英文版） Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics |
|
|
|
|
GB/T 14055.1-2008 中子参考辐射 第1部分：辐射特性和产生方法（中英文版） Reference neutron radiations - Part 1: Characteristics and methods of production |
|
|
|
|
GB/T 11807-2008 探查松脱零件的声学监测系统的特性、设计和运行程序（中英文版） Acoustic monitoring systems for loose parts detection - Characteristics, design and operational procedures |
|
|
|
|
GB/T 8054-2008 计量标准型一次抽样检验程序及表（中英文版） Single sampling procedures and tables for Inspection having desired operating Characteristics by variables |
|
|
|
|
GB/T 17294.1-2008 缩微摄影技术 字母数字计算机输出缩微品 质量控制 第1部分: 测试幻灯片和测试数据的特征（中英文版） Micrographics - Alphanumeric computer output microforms - Quality control - Part 1: Characteristics of the test slide and test data |
|
|
|
|
GB/T 13262-2008 不合格品百分数的计数标准型一次抽样检验程序及抽样表（中英文版） Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming |
|
|
|
|
GB/T 8287.2-2008 标称电压高于1000V系统用户内和户外支柱绝缘子 第2部分：尺寸与特性（中英文版） Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 2: Dimensions and characteristics |
|
|
|
|
GB/T 14480.3-2008 无损检测 涡流检测设备 第3部分: 系统性能和检验（中英文版） Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification |
|
|
|
|
GB/T 18910.41-2008 液晶显示器件 第4-1部分：彩色矩阵液晶显示模块 基本额定值和特性（中英文版） Liquid crystal display devices Part 4-1: Matrix colour LCD modules- Essential ratings and characteristics |
|
|
|
|
GB/T 22108.1-2008 气动压缩空气过滤器 第1部分: 商务文件中包含的主要特性和产品标识要求（中英文版） Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in supplier’s literature and product-marking requirements |
|
|
|
|
GB/T 4861-2008 模拟计数率表 特性和测试方法（中英文版） Analogue counting ratemeters - Characteristics and test methods |
|
|
|
|
GB/T 9383-2008 声音和电视广播接收机及有关设备抗扰度 限值和测量方法（中英文版） Sound and television broadcast receivers and associated equipment-immunity characteristics - Limits and methods of measurement |
|
|
|
|
GB/T 21954.2-2008 金属切割带锯条 第2部分：特性和尺寸（中英文版） Metal cutting band saw blades - Part 2：Characteristics and dimensions |
|
| 找到:294條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 |
