中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 3880.3-2012 一般工业用铝及铝合金板、带材 第3部分:尺寸偏差(中英文版) Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions |
|||
GB/T 3286.3-2012 石灰石及白云石化学分析方法 第3部分:氧化铝含量的测定 铬天青S分光光度法和络合滴定法(中英文版) Methods for chemical analysis of limestone and dolomite - Part 3: The determination of aluminium oxide content - The chrome azurol S spectrophotometric method and the complexometric titration method |
|||
GB/T 9793-2012 热喷涂 金属和其他无机覆盖层 锌、铝及其合金(中英文版) Thermal spraying - Metallic and other inorganic coatings - Zinc,aluminium and their alloys |
|||
GB/T 17397-2012 铝电解生产防尘防毒技术规程(中英文版) Regulations for dust and poison control of aluminium electrowinning |
|||
GB/T 16474-2011 变形铝及铝合金牌号表示方法(中英文版) Designation system for wrought aluminium and aluminium alloy |
|||
GB/T 27676-2011 铝及铝合金管形导体(中英文版) Aluminium and aluminium alloy tube bus conductors |
|||
GB/T 27675-2011 铝及铝合金复合板、带、箔材牌号表示方法(中英文版) Designation system for aluminium and aluminium alloys composite sheets, strips and foils |
|||
GB/T 26930.1-2011 原铝生产用炭素材料 煤沥青 第1部分:水分含量的测定 共沸蒸馏法(中英文版) Carbonaceous materials for the production of primary aluminium - Pitch for electrodes - Part 1:Determination of water content - Azeotropic distillation(Dean and Stark) method |
|||
GB/T 26930.2-2011 原铝生产用炭素材料 煤沥青 第2部分:软化点的测定 环球法(中英文版) Carbonaceous materials for the production of primary aluminium - Pitch for electrodes - Part 2:Determination of softening point by the ring and ball method |
|||
GB 26756-2011 铝及铝合金热挤压棒材单位产品能源消耗限额(中英文版) The norm of energy consumption per unit products for extruded aluminium and aluminium alloy rods and bars |
|||
GB/T 8005.2-2011 铝及铝合金术语 第2部分:化学分析(中英文版) Terms of aluminium and aluminium alloys - part 2: Chemical analysis |
|||
GB/T 26492.5-2011 变形铝及铝合金铸锭及加工产品缺陷 第5部分:管材、棒材、型材、线材缺陷(中英文版) Defects of wrought aluminium and aluminium alloys ingots and products - Part 5: Defects for tubes,rods or bars,profiles,wires |
|||
GB/T 26492.4-2011 变形铝及铝合金铸锭及加工产品缺陷 第4部分:铝箔缺陷(中英文版) Defects of wrought aluminium and aluminium alloys ingots and products - Part 4: Defects for foils |
|||
GB/T 26492.3-2011 变形铝及铝合金铸锭及加工产品缺陷 第3部分:板、带缺陷(中英文版) Defects of wrought aluminium and aluminium alloys ingots and products - Part 3: Defects for plates,sheets and strips |
|||
GB/T 26492.2-2011 变形铝及铝合金铸锭及加工产品缺陷 第2部分:铸轧带材缺陷(中英文版) Defects of wrought aluminium and aluminium alloy ingots and products - Part 2: Defects for roll-casting strips |
|||
GB/T 26492.1-2011 变形铝及铝合金铸锭及加工产品缺陷 第1部分:铸锭缺陷(中英文版) Defects of wrought aluminium and aluminium alloys ingots and products - part 1:Defects for ingots |
|||
GB/T 6893-2010 铝及铝合金拉(轧)制无缝管(中英文版) Aluminium and aluminium alloys cold drawn (rolled) seamless tubes |
|||
GB/T 12967.7-2010 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus |
|||
GB/T 26293-2010 铝电解用炭素材料 冷捣糊和中温糊 未焙烧糊捣实性的测定(中英文版) Carbonaceous materials used in the production of aluminium - Cold and tepid ramming paste - Determination of rammability of unbaked paste |
|||
GB/T 26294-2010 铝电解用炭素材料 冷捣糊中有效粘合剂含量、骨料含量及骨料粒度分布的测定 喹啉萃取法(中英文版) Carbonaceous materials used in the production of aluminium - Cold-ramming paste - Determination of effective binder content and aggregate content by extraction with quinoline,and determination of aggregate size distribution |
|||
GB/T 26295-2010 铝电解用炭素材料 预焙阳极和阴极炭块 四点法测定抗折强度(中英文版) Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method |
|||
GB/T 3198-2010 铝及铝合金箔(中英文版) Aluminium and aluminium alloys foils |
|||
GB/T 26323-2010 色漆和清漆 铝及铝合金表面涂膜的耐丝状腐蚀试验(中英文版) Paints and varnishes - Determination of resistance to filiform corrosion on aluminium and aluminium alloys |
|||
GB/T 3191-2010 铝及铝合金挤压棒材(中英文版) Aluminium and aluminium alloys extruded bars,rods |
|||
GB/T 26027-2010 铝及铝合金大规格拉制无缝管(中英文版) Aluminium and aluminium alloys drawn seamless tubes for large circumscribed circle diameter of cross section |
|||
GB/T 26006-2010 船用铝合金挤压管、棒、型材(中英文版) Aluminium alloys extruded tubes,bars,rods,and profiles used for ships |
|||
GB 25326-2010 铝及铝合金轧、拉制管、棒材单位产品能源消耗限额(中英文版) The norm of energy consumption per unit products of rolled or drawn aluminium and aluminium alloy tubes,bars |
|||
GB 25465-2010 铝工业污染物排放标准(中英文版) Emission Standard of Pollutants from Aluminium Industry |
|||
GB 50586-2010 铝母线焊接工程施工及验收规范(中英文版) Code for construction and acceptance of aluminium bus-bar welding engineering |
|||
GB/T 24598-2009 铝及铝合金熔化焊焊工技能评定(中英文版) Qualification test of welders - Fusion welding for aluminium and aluminium alloys |
|||
GB/T 24514-2009 钢表面锌基和(或)铝基镀层 单位面积镀层质量和化学成分测定 重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法(中英文版) Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
|||
GB/T 8704.8-2009 钒铁 铝含量的测定 铬天青S分光光度法和EDTA滴定法(中英文版) Ferrovanadium - Determination of aluminium content - The chromazurol S spectrophotometric method and EDTA titrimetric method |
|||
GB/T 24229-2009 铬矿石和铬精矿 铝含量的测定 络合滴定法(中英文版) Chromium ores and concentrates - Determination of aluminium content - Complexometric method |
|||
GB/T 24193-2009 铬矿石和铬精矿 铝、铁、镁和硅含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Chromium ores and concentrates - Determination of aluminium, iron , magnesium and silicon content - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 24197-2009 锰矿石 铁、硅、铝、钙、钡、镁、钾、铜、镍、锌、磷、钴、铬、钒、砷、铅和钛含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Manganese ores - Determination of iron,silicon,aluminium,calcium,barium,magnesium,potassium,copper,nickel,zinc,phosphorus,cobalt,chromium,vanadium,arsenic,lead,titanium and vanadium - Inductively coupled plasma atomic emiss |
|||
GB/T 24194-2009 硅铁 铝、钙、锰、铬、钛、铜、磷和镍含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Ferrosilicon - Determination of aluminium, calcium, manganese, chromium, titanium, copper, phosphorus and nickel content - Inductively coupled plasma atomic emission spectrometric method |
|||
GB/T 6609.2-2009 氧化铝化学分析方法和物理性能测定方法 第2部分:300℃和1000℃质量损失的测定(中英文版) Chemical analysis methods and determination of physical performance of aluminium hydroxide - Part 2: Determination of loss of mass at 300℃ and 1000℃ |
|||
GB/T 23612-2009 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范(中英文版) Anodizing and electrophoretic painting technical specification on wrought aluminium alloy extruded profiles for architecture |
|||
GB/T 5584.3-2009 电工用铜、铝及其合金扁线 第3部分:铝扁线(中英文版) Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 3: Aluminium rectanglar wire |
|||
GB/T 5584.2-2009 电工用铜、铝及其合金扁线 第2部分:铜扁线(中英文版) Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 2: Rectangular copper wire |
|||
GB/T 23367.2-2009 钴酸锂化学分析方法 第2部分:锂、镍、锰、镁、铝、铁、钠、钙和铜量的测定 电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of lithium cobalt oxide - Part 2: Determination of lithium,nickel,manganese,magnesium,aluminium,iron,sodium,calcium and copper content - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 5584.1-2009 电工用铜、铝及其合金扁线 第1部分:一般规定(中英文版) Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 1: General |
|||
GB/T 23273.8-2009 草酸钴化学分析方法 第8部分:镍、铜、铁、锌、铝、锰、铅、砷、钙、镁、钠量的测定 电感耦合等离子体发射光谱法(中英文版) Methods for chemical analysis of cobalt oxalate - Part 8: Determination of nicke,copper,iron,zinc,aluminium,manganese, lead,arsenic,calcium,magnesium and sodium content - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 22638.7-2008 铝箔试验方法 第7部分:热封强度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength |
|||
GB/T 22641-2008 船用铝合金板材(中英文版) Wrought aluminium alloys sheet and plate for ships |
|||
GB/T 22638.10-2008 铝箔试验方法 第10部分:涂层表面密度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 10: Determination of mass per unit area (surface density) of coatings |
|||
GB/T 22638.1-2008 铝箔试验方法 第1部分:厚度的测定 重量法(中英文版) Test methods for aluminium and aluminium alloy foils - Part 1: Determination of thickness by gravimetric method |
|||
GB/T 22638.2-2008 铝箔试验方法 第2部分:针孔的检测(中英文版) Test methods for aluminium and aluminium alloy foils - Part 2: Determination of porosity |
|||
GB/T 22638.3-2008 铝箔试验方法 第3部分:粘附性的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 3: Determination of stickiness |
|||
GB/T 22638.4-2008 铝箔试验方法 第4部分:表面润湿张力的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 4: Determination of surface wetting tension |
找到:314條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |