中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 1864-2012 颜料和体质颜料通用试验方法 颜料颜色的比较(中英文版) General methods of test for pigments and extenders - Comparison of colour of pigments |
|||
GB/T 29417-2012 水泥砂浆和混凝土干燥收缩开裂性能试验方法(中英文版) Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete |
|||
GB/T 29040-2012 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性(中英文版) Test methods of rolling resistance for motor vehicle tyres - Single point test and correlation of measurement results |
|||
GB/T 29046-2012 城镇供热预制直埋保温管道技术指标检测方法(中英文版) Test methods of technical specification for pre-insulated directly buried district heating pipes |
|||
GB/T 29036-2012 不锈钢表面氧化着色 技术规范和试验方法(中英文版) Coloring of stainless steel by Oxidation - Specification and test methods |
|||
YD/T 1592.1-2012 2ghz td-scdma数字蜂窝移动通信系统电磁兼容性要求和测量方法 第1部分:用户设备及其辅助设备(中英文版) Technical specification and testing methods of electromagnetic compatibility for TD-SCDMA digital cellular moble communications system. Part 1: User equipment and ancillary equipment |
|||
YD/T 2412-2012 wcdma双卡双通数字移动通信终端测试方法(中英文版) Test methods of WCDMA dual card dual active digital mobile station |
|||
YD/T 2413-2012 2ghz wcdma数字蜂窝移动通信网 演进架构的无线接入子系统设备技术要求和测试方法(第五阶段)增强型高速分组接入(hspa+)(中英文版) 2GHz WCDMA digital cellular mobile telecommunication network. Technical requirement and Test methods of evolved architecture RAN equipment (Phase 5). HSPA+ |
|||
YD/T 627-2012 数字交换机数字中继接口(2 048kbit/s)参数及数字中继接口间传输特性和测试方法(中英文版) Parameters, transmission characteristics and test methods of the digital relay interface (2048kbit/s) for digital switch |
|||
YD/T 640-2012 通信设备用射频连接器技术要求及试验方法(中英文版) General requirements and test methods for radio-frequency connectors of telecommunication equipment |
|||
YD/T 641-2012 通信设备用低频连接器技术要求及试验方法(中英文版) General requirements and test methods for low frequency connectors of telecommunication equipment |
|||
SN/T 3389-2012 食品接触材料 金属基聚合物涂层 总迁移试验条件和方法选择指南(中英文版) Food contact materials. Polymeric coatings on metal substrates. Guide to the selection of conditions and test methods for overall migration |
|||
SN/T 1196-2012 转基因成分检测 玉米检测方法(中英文版) Detection of genetically modified components. Maize test methods |
|||
SN/T 3386-2012 食品接触材料 高分子材料 迁移到14C标记合成甘油三酯混合物的总迁移量试验方法(中英文版) Food contact materials. Polymers. Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides |
|||
QB/T 1537-2012 指针式石英表用单相永磁步进电动机的技术要求和试验方法(中英文版) Technical specifications and test methods of single-phase permanent magnet stepper motors for analogue quartz watches |
|||
GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版) Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings |
|||
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
|||
GB/T 14999.3-2012 高温合金试验方法 第3部分:棒材纵向断口检验(中英文版) Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars |
|||
GB/T 28900-2012 钢筋混凝土用钢材试验方法(中英文版) Test methods of steel for reinforcement of concrete |
|||
GB/T 2422-2012 环境试验 试验方法编写导则 术语和定义(中英文版) Environmental testing - Guide to drafting of test methods - Terms and definitions |
找到:1207條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [24] [25] [26] [27] [28] [29] [30] |