中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 14018-2009 木材握钉力试验方法(中英文版) Method of testing nail holding power of wood |
|||
YY/T 0522-2009 牙科学 牙种植体系统临床前评价 动物试验方法(中英文版) Dentistry - Preclinical evaluation of dental implant systems - Animal testing methods |
|||
GB/T 22906.3-2008 纸芯的测定 第3部分:水分含量的测定(烘箱干燥法)(中英文版) Testing of cores - Part 3: Determination of moisture content using the oven drying method |
|||
GB/T 22906.7-2008 纸芯的测定 第7部分:弹性模量的测定(三点法)(中英文版) Testing of cores - Part 7: Determination of flexural modulus by the three-point method |
|||
GB/T 22759-2008 家用和类似用途的制冷器具可靠性试验方法(中英文版) Test methods for reliability of household and similar refrigerating appliances |
|||
GB/T 5169.30-2008 电工电子产品着火危险试验 第30部分:热释放 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products - Part 30: Heat release - Summary and relevance of test methods |
|||
GB/T 5169.26-2008 电工电子产品着火危险试验 第26部分:烟模糊 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods |
|||
GB 23177-2008 举重杠铃的安全、性能要求和试验方法(中英文版) The safety and capability requirements and testing methods for barbell of weightlifting |
|||
GB/T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments - Hydraulic vibrating type machines for vibration(random) test |
|||
GB/T 22638.10-2008 铝箔试验方法 第10部分:涂层表面密度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 10: Determination of mass per unit area (surface density) of coatings |
|||
GB/T 22638.4-2008 铝箔试验方法 第4部分:表面润湿张力的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 4: Determination of surface wetting tension |
|||
AQ 2014-2008 逆反射型矿山安全标志技术条件和试验方法(中英文版) Specifications and testing methods of retroreflective safety signs for mines |
|||
GB/T 22567-2008 电气绝缘材料 测定玻璃化转变温度的试验方法(中英文版) Electrical insulating materials - Methods of test for the determination of the glass transition temperature |
|||
GB/T 13754-2008 采暖散热器散热量测定方法(中英文版) Test methods of thermal output of heating radiators |
|||
YY/T 0695-2008 小型植入器械腐蚀敏感性的循环动电位极化标准测试方法(中英文版) Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices |
|||
YY/T 0688.1-2008 临床实验室检测和体外诊断系统 感染病源体敏感性试验与抗菌剂敏感性试验设备的性能评价 第1部分:抗菌剂对感染性疾病相关的快速生长需氧菌的体外活性检测的参考方法(中英文版) Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility devices. Part 1: Reference method for testing the in vitro activity of antimicrobia |
|||
GB/T 13823.20-2008 振动与冲击传感器校准方法 加速度计谐振测试 通用方法(中英文版) Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods |
|||
GB/T 10066.9-2008 电热装置的试验方法 第9部分:高频介质加热装置输出功率的测定(中英文版) Test methods for electroheat installtions - Part 9: The determination of power output for High-frequency dielectric heating installation |
|||
GB/T 10066.6-2008 电热装置的试验方法 第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output |
|||
GB/T 10175.1-2008 土方机械 装载机和挖掘装载机 第1部分:额定工作载荷的计算和验证倾翻载荷计算值的测试方法(中英文版) Earth moving machinery - Loaders and backhoe loaders - Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load |
找到:974條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [24] [25] [26] [27] [28] [29] [30] |