中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 26276-2010
工程机械子午线轮胎无损检验方法 X-射线法(中英文版)
Test method of non-destructive inspection for earth-mover radial tyres - X-ray method
 
GB/T 12967.7-2010
铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版)
Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus
 
GB/T 24218.8-2010
纺织品 非织造布试验方法 第8部分:液体穿透时间的测定(模拟尿液)(中英文版)
Textiles - Test methods for nonwovens - Part 8:Determination of liquid strike-through time (simulated urine)
 
GB/T 24218.3-2010
纺织品 非织造布试验方法 第3部分:断裂强力和断裂伸长率的测定(条样法)(中英文版)
Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation (Strip method)
 
GB/T 26349-2010
蝇类抗药性检测方法 家蝇不敏感乙酰胆碱酯酶法(中英文版)
Test methods of fly resistance to insecticides - Test methods of insensitive acetylcholinesterase for Musca domestica
 
GB/T 26272-2010
地面数字电视调谐器基本性能要求和测量方法(中英文版)
Basic performance requirment and test method of terristrial digital television tuner
 
GB/T 26348-2010
蚊虫抗药性检测方法 不敏感乙酰胆碱酯酶法(中英文版)
Test methods of mosquito resistance to insecticides - Test methods of insensitive acetylcholinesterase for the mosquito
 
GB/T 26352-2010
蜚蠊抗药性检测方法 德国小蠊生物测定法(中英文版)
Test methods of cockroach resistance to insecticides - The bioassay methods for Blattella germanica
 
GB/T 26350-2010
蝇类抗药性检测方法 家蝇生物测定法(中英文版)
Test methods of fly resistance to insecticides - The bioassay methods for Musca domestica
 
GB/T 6536-2010
石油产品常压蒸馏特性测定法(中英文版)
Standard test method for distillation of petroleum products at atmospheric pressure
 
GB/T 5923-2010
汽车柴油机燃油滤清器试验方法(中英文版)
Test methods of fuel filter for automotive compression ignition engines
 
GB/T 4509-2010
沥青针入度测定法(中英文版)
Standard test method for penetration of bitumen
 
GB/T 4508-2010
沥青延度测定法(中英文版)
Standard test method for ductility of bitumen
 
GB/T 386-2010
柴油十六烷值测定法(中英文版)
Standard test method for cetane number of diesel fuel oil
 
GB/T 25962-2010
高速条件下汽车轮毂轴承润滑脂漏失量测定法(中英文版)
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions
 
GB/T 9169-2010
喷气燃料热氧化安定性的测定 JFTOT法(中英文版)
Standard test method for thermal oxidation stability of aviation turbine fuels - JFTOT procedure
 
GB/T 26068-2010
硅片载流子复合寿命的无接触微波反射光电导衰减测试方法(中英文版)
Test method for carrier recombination lifetime in silicon wafers by non-contact measurement of photoconductivity decay by microwave reflectance
 
GB/T 25858-2010
精密空调机组性能测试方法(中英文版)
Performance testing method of precision air conditioning unit
 
GB/T 26085-2010
船舶防污漆锡总量的测试及判定(中英文版)
Test method and determination of total tin in antifouling paints for ship
 
GB/T 25967-2010
带辅助能源的家用太阳能热水系统热性能试验方法(中英文版)
Test methods for thermal performance of domestic solar-plus-supplementary water heating systems
 
GB/T 2013-2010
液体石油化工产品密度测定法(中英文版)
Standard test method for density of liquid petrochemical products
 
GB/T 25996-2010
绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法(中英文版)
Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel
 
GB/T 26067-2010
硅片切口尺寸测试方法(中英文版)
Standard test method for dimensions of notches on silicon wafers
 
GB/T 25995-2010
精细陶瓷密度和显气孔率试验方法(中英文版)
Test methods for density and apparent porostiy of fine ceramics
 
GB/T 25758.3-2010
无损检测 工业X射线系统焦点特性 第3部分:狭缝照相机射线照相方法(中英文版)
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
 
GB/T 14999.7-2010
高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法(中英文版)
Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
 
GB/T 25749.3-2010
机械安全 空气传播的有害物质排放的评估 第3部分:测量给定污染物排放率的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
 
GB/T 25757-2010
无损检测 钢管自动漏磁检测系统综合性能测试方法(中英文版)
Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
 
GB/T 14999.6-2010
锻制高温合金双重晶粒组织和一次碳化物分布测定方法(中英文版)
Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings
 
GB/T 25758.4-2010
无损检测 工业X射线系统焦点特性 第4部分:边缘方法(中英文版)
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
 
GB/T 25758.1-2010
无损检测 工业X射线系统焦点特性 第1部分:扫描方法(中英文版)
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
 
GB/T 25774.1-2010
焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验(中英文版)
Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys
 
GB/T 25774.3-2010
焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验(中英文版)
Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint
 
GB/Z 6113.405-2010
无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分:不确定度、统计学和限值建模替换试验方法的使用条件(中英文版)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
 
GB/T 16937-2010
土方机械 司机视野 试验方法和性能准则(中英文版)
Earth-moving machinery - Operator’s field of view - Test method and performance criteria
 
GB/T 25758.2-2010
无损检测 工业X射线系统焦点特性 第2部分:针孔照相机射线照相方法(中英文版)
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
 
GB/T 25611-2010
土方机械 机器液体系统作业的坡道极限值测定 静态法(中英文版)
Earth-moving machinery - Determination of slope limits for machine fluid systems operation - Static test method
 
GB/T 19902.4-2010
工业自动化系统与集成 制造软件互操作性能力建规 第4部分:一致性测试方法、判则及报告(中英文版)
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports
 
GB/T 25480-2010
仪器仪表运输、贮存基本环境条件及试验方法(中英文版)
Basic environmental conditions and testing methods for transportation and storage of instruments
 
GB/T 25494-2010
吸气剂成分分析测试方法(中英文版)
Test methods for composition analysis of getters
 
GB/T 25495-2010
吸气剂金属释放特性测试方法(中英文版)
Test methods for metal releasing characteristics of getters
 
GB/T 25496-2010
吸气剂机械性能测试方法(中英文版)
Test methods for the mechanical properties of getters
 
GB/T 25497-2010
吸气剂气体吸放性能测试方法(中英文版)
Test methods for gas absorbency and release of getters
 
GB/T 6146-2010
精密电阻合金电阻率测试方法(中英文版)
Test method for resistivity of precision resistance alloys
 
GB/T 25395-2010
葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法(中英文版)
Equipment for vine cultivation and wine making - Grape presses - Methods of test
 
GB/T 25413-2010
农田地膜残留量限值及测定(中英文版)
Limit and test method for residual quantity of agricultural mulch film
 
GB/T 25414-2010
棉花种植用地膜厚度限值及测定(中英文版)
Thickness limit and test method of mulch film for cotton planting
 
GB/T 25442-2010
旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版)
Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles)
 
GB/T 25394-2010
葡萄栽培和葡萄酒酿制设备 果浆泵 试验方法(中英文版)
Equipment for vine cultivation and wine making - Mash pumps - Methods of test
 
GB/T 13929-2010
水环真空泵和水环压缩机 试验方法(中英文版)
Methods of testing for water-ring vacuum pumps and compressors
 

找到:2483條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [23] [24] [25] [26] [27] [28] [29]