中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 24299-2009 热双金属碟形元件机械寿命试验方法(中英文版) Test method for the mechanical life of snap action discs of thermostat bimetal |
|||
GB/T 13770-2009 纺织品 评定织物经洗涤后褶裥外观的试验方法(中英文版) Textiles - Test method for assessing the appearance of creases in fabrics after cleansing |
|||
GB/T 13769-2009 纺织品 评定织物经洗涤后外观平整度的试验方法(中英文版) Textiles - Test method for assessing the smoothness appearance of fabrics after cleansing |
|||
GB/T 24326-2009 纸浆 物理试验用实验室纸页的制备 快速凯塞法(中英文版) Pulps - Preparation of laboratory sheets for physical testing - Rapid-Kothen method |
|||
JT/T 326-2009 港口带式输送机能源利用效率检测方法(中英文版) The test methods of power utilization on the harbor belt conveyor |
|||
GB/T 24210-2009 整体石墨电极弹性模量试验 声速法(中英文版) Test method for the elastis modulus of whole graphite electrodes - Velocity of sound |
|||
GB/T 24205-2009 铁矿粉 烧结试验结果表示方法(中英文版) Iron ores fines - Method for presentation the results of sintering test |
|||
SN/T 2302.1-2009 口岸入境可用作原料的工业品废物环控指标检测方法 第1部分:ph值检验方法 表面ph值测定方法(中英文版) Test method of environmental protection control for imported industrial wastes as raw materials. Part 1: pH Detecting. The method of surface pH detecting |
|||
GB/T 24185-2009 逐级加力法测定钢中氢脆临界值试验方法(中英文版) Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method |
|||
GB/T 24272-2009 热双金属平螺旋形元件机械转矩率试验方法(中英文版) Test method for mechanical torque rate of spiral coils of thermostat metal |
|||
GB/T 12705.1-2009 纺织品 织物防钻绒性试验方法 第1部分:摩擦法(中英文版) Textile - Methods of testing the down-proof properties of fabrics - Part 1: Rubbing test |
|||
GB/T 13762-2009 土工合成材料 土工布及土工布有关产品单位面积质量的测定方法(中英文版) Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
|||
GB/T 24277-2009 评估部分型式试验成套设备(PTTA)短路耐受强度的一种方法(中英文版) A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) |
|||
GB/T 12705.2-2009 纺织品 织物防钻绒性试验方法 第2部分:转箱法(中英文版) Textile - Methods of testing the down-proof properties of fabrics - Part 2: Tumble test |
|||
YY/T 0698.7-2009 最终灭菌医疗器械包装材料 第7部分:环氧乙烷或辐射灭菌屏障系统生产用可密封涂胶纸 要求和试验方法(中英文版) Packaging materials for terminal sterilized medical devices. Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods |
|||
YY/T 0698.9-2009 最终灭菌医疗器械包装材料 第9部分:可密封组合袋、卷材和盖材生产用无涂胶聚烯烃非织造布材料 要求和试验方法(中英文版) Packaging materials for terminally sterilized medical devices. Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of sealable pouches, reels and lids. Requirements and test methods |
|||
YY/T 0698.3-2009 最终灭菌医疗器械包装材料 第3部分:纸袋(yy/t 0698.4所规定)、组合带和卷材(yy/t 0698.5所规定)生产用纸 要求和试验方法(中英文版) Packaging materials for terminal sterilized medical devices. Part 3: Paper for use in the manufacture of paper bags (specified in YY/T 0698.4) and in the manufacture of pouches and reels (specified in YY/T 0698.5). Requirements and test methods |
|||
YY/T 0698.10-2009 最终灭菌医疗器械包装材料 第10部分:可密封组合袋、卷材和盖材生产用涂胶聚烯烃非织造布材料 要求和试验方法(中英文版) Packaging materials for terminally sterilized medical devices. Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of sealable pouches, reels and lids. Requirements and test methods |
|||
YD/T 1918-2009 isdn信令与ip互通用户适配层(iua)测试方法(中英文版) Test Methods for the Adaptation Layer of ISDN Signalling Interworking with IP |
|||
GB/T 24143-2009 橡胶与橡胶制品 试验方法灵敏度的确定(中英文版) Rubber and rubber products - Determination of the sensitivity of test methods |
找到:907條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [21] [22] [23] [24] [25] [26] [27] |