中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB 22128-2008
报废汽车回收拆解企业技术规范(中英文版)
Technical specifications for End-of-Life Vehicles recycling and dismantling enterprise
 
GB/T 15548-2008
往复式内燃机驱动的三相同步发电机通用技术条件(中英文版)
General specification for three-phase synchronous generators driven by reciprocating internal combustion engine
 
GB/T 10589-2008
低温试验箱技术条件(中英文版)
Specifications for low temperature test chambers
 
GB/T 11158-2008
高温试验箱技术条件(中英文版)
Specifications for high temperature test chambers
 
GB/T 12975-2008
船用同步发电机通用技术条件(中英文版)
General specification for synchronous generator in ship
 
GB/T 22072-2008
干式非晶合金铁心配电变压器技术参数和要求(中英文版)
Specifications and technical requirements for dry-type amorphous alloy core distribution transformers
 
GB/T 4654-2008
非金属基体红外辐射加热器通用技术条件(中英文版)
The general technical specifications for non-metallic basic body infrared heater
 
GB/T 7060-2008
船用旋转电机基本技术要求(中英文版)
General specifications for rotary electrical machines in ships
 
GB/T 1631-2008
离子交换树脂命名系统和基本规范(中英文版)
Designation system and basis for specifications of ion exchange resins
 
GB/T 17200-2008
橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范(中英文版)
Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse)
 
GB/T 14477-2008
海图印刷规范(中英文版)
Printing specifications for charts
 
GB/T 10824-2008
充气轮胎轮辋实心轮胎技术规范(中英文版)
Technical specification of solid tyres for pneumatic tyres rims
 
GB/T 22101.1-2008
棉花抗病虫性评价技术规范 第1部分:棉铃虫(中英文版)
Technical specification for evaluating resistance of cotton to disease and insect pests - Part 1: Cotton bollworm
 
GB/T 18673-2008
渔用机织网片(中英文版)
General technical specifications for machine weaving netting for fisheries
 
GB/T 21969-2008
YGP系列辊道用变频调速三相异步电动机技术条件(中英文版)
Technical specification for YGP series variable-frequency adjustable-speed shree-phase induction motors for roll table application
 
GB/T 21971-2008
YZD系列起重用多速三相异步电动机技术条件(中英文版)
Technical specification for YZD range of multi-speed three-phase induction motors for crane application
 
GB/T 13139-2008
磁滞同步电动机通用技术条件(中英文版)
General specification for hysteresis synchronous motors
 
GB/T 21968-2008
YBZS系列起重用隔爆型双速三相异步电动机技术条件(中英文版)
Technical specification for YBZS range of flame-proof double-speed three-phase induction motors for crane application
 
GB/T 4997-2008
永磁式低速直流测速发电机通用技术条件(中英文版)
General specification for permanent magnet low speed direct current tachogenerator
 
GB/T 21973-2008
YZR3系列起重及冶金用绕线转子三相异步电动机技术条件(中英文版)
Technical specification for YZR3 range of wound-rotor three-phase induction motors for crane & metallurgical applications
 
GB/T 21974-2008
YZRW系列起重及冶金用涡流制动绕线转子三相异步电动机技术条件(中英文版)
Technical specification for YZRW range of eddy-current braking wound-rotor three-phase induction motors for crane and metallurgical application
 
GB/T 21972.1-2008
起重及冶金用变频调速三相异步电动机技术条件 第1部分:YZP系列起重及冶金用变频调速三相异步电动机(中英文版)
Technical specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical application - Part 1:YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applicati
 
GB/T 21967-2008
YBZE、YBZSE系列起重用隔爆型电磁制动三相异步电动机技术条件(中英文版)
YBZE、YBZSE Range three-phase induction motors for crane application flameproof electromagnetic braking technical specifications
 
GB/T 11880-2008
模锻锤和大型机械锻压机用模块技术条件(中英文版)
Specification of large die-blocks used for die-forging hammer and mechanical forging press
 
GB/T 8081-2008
天然生胶 技术分级橡胶(TSR)规格导则(中英文版)
Rubber, raw natural - Guidelines for the specification of technically specified rubber(TSR)
 
GB/T 21955-2008
农林拖拉机和机械 纸基摩擦片 技术条件(中英文版)
Tractors and machinery for agriculture and forestry - Paper friction disc - Technical specifications
 
GB/T 18749-2008
耐化学腐蚀陶瓷塔填料技术条件(中英文版)
Standard specification for chemical-resistant ceramic tower packings
 
GB/T 18922-2008
建筑颜色的表示方法(中英文版)
Methods of color specification for architecture
 
GB/T 21736-2008
节能热处理燃烧加热设备技术条件(中英文版)
Technical specifications of energy-saving combustion devices for heat treating
 
GB/T 21717-2008
小型水轮机型式参数及性能 技术规定(中英文版)
Technical specification about the type parameter and performance of small hydraulic turbines
 
GB/T 12940-2008
银石墨电触头技术条件(中英文版)
Technical specification for silver-graphite electrical contacts
 
GB/T 13397-2008
合金内氧化法银金属氧化物电触头技术条件(中英文版)
Technical specification for silver-metaloxide electrical contacts by alloy internal oxidation method
 
GB/T 21671-2008
基于以太网技术的局域网系统验收测评规范(中英文版)
Acceptance test specification for Local Area Network (LAN) systems based on ethernet technology
 
GB/T 21646-2008
400MHz频段模拟公众无线对讲机技术规范和测量方法(中英文版)
Technical specification and testing methods for analog public radio interphone on 400MHz band
 
GB/T 10592-2008
高低温试验箱技术条件(中英文版)
Specification for low/high temperature test chambers
 
GB/T 15972.50-2008
光纤试验方法规范 第50部分:环境性能的测量方法和试验程序 恒定湿热(中英文版)
Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state)
 
GB/T 15972.40-2008
光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减(中英文版)
Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation
 
GB/T 15972.30-2008
光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版)
Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test
 
GB/T 13288.1-2008
涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义(中英文版)
Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl
 
GB/T 15972.43-2008
光纤试验方法规范 第43部分:传输特性和光学特性的测量方法和试验程序 数值孔径(中英文版)
Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture
 
GB/T 15972.32-2008
光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版)
Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability
 
GB/T 15972.33-2008
光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版)
Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility
 
GB/T 15972.52-2008
光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环(中英文版)
Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature
 
GB/T 15972.34-2008
光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲(中英文版)
Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical characteristics - Fibre curl
 
GB/T 15972.31-2008
光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版)
Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength
 
GB/T 15972.41-2008
光纤试验方法规范 第41部分:传输特性和光学特性的测量方法和试验程序 带宽(中英文版)
Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth
 
GB/T 15972.42-2008
光纤试验方法规范 第42部分:传输特性和光学特性的测量方法和试验程序 波长色散(中英文版)
Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion
 
GB/T 15972.45-2008
光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序 模场直径(中英文版)
Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter
 
GB/T 15972.46-2008
光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化(中英文版)
Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance
 
GB/T 15972.47-2008
光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗(中英文版)
Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss
 

找到:1588條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [21] [22] [23] [24] [25] [26] [27]