中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
QC/T 801-2008 摩托车和轻便摩托车簧片阀式二次空气补给机构技术要求和试验方法(中英文版) Technical requirements and testing methods of reed valve type second air injectors for motorcycles and mopeds |
|||
GB/T 21956.2-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS |
|||
GB/T 7121.1-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法(中英文版) The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS |
|||
GB/T 21960-2008 农林拖拉机驾驶座试验方法和验收条件(中英文版) The testing method and accepting condition of the driver’s seat on agricultural and forestry tractors |
|||
GB/T 21956.3-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS |
|||
GB/T 21956.1-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS |
|||
GB/T 14321-2008 刚玉磨料中α-Al2O3相X射线定量测定方法(中英文版) Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer |
|||
GB/T 21957-2008 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法(中英文版) The fatigue-life testing method of the axle shaft and drive shaft on the test stand,wheeled agricultural tractor |
|||
GB/T 13813-2008 煤矿用金属材料摩擦火花安全性试验方法和判定规则(中英文版) Testing method and judging rule of safety to friction spark of metallic material for coal mine |
|||
GB/T 2423.43-2008 电工电子产品环境试验 第2部分:试验方法 振动、冲击和类似动力学试验样品的安装(中英文版) Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests |
|||
GB/T 9291-2008 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法(中英文版) Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions |
|||
GB/T 12605-2008 无损检测 金属管道熔化焊环向对接接头射线照相检测方法(中英文版) Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
|||
GB/T 21853-2008 化学品 分配系数(正辛醇-水) 摇瓶法试验(中英文版) Testing of chemicals - Partition coefficient(n-octanol/water)- Shake flask method |
|||
GB/T 21815.1-2008 化学品 海水中的生物降解性 摇瓶法试验(中英文版) Testing of chemicals Biodegradability in seawater - Shake flask method |
|||
GB/T 21852-2008 化学品 分配系数(正辛醇-水) 高效液相色谱法试验(中英文版) Testing of chemicals - Partition coefficient(n-octanol/water)- High performance liquid chromatography(HPLC)method |
|||
YY/T 0108-2008 超声诊断设备m模式试验方法(中英文版) Testing methods for M-mode of ultrasonic diagnostic equipment |
|||
HG/T 2873-2008 胶鞋鞋底屈挠试验方法(中英文版) Testing method for flexibility of sole of rubber shoes |
|||
GB/T 19198-2008 贵金属及其合金对铂、对铜热电动势的测量方法(中英文版) Testing method for thermo-electromotive force of precious metals and their alloys pair up with platinum or copper |
|||
GB/T 15078-2008 贵金属电触点材料接触电阻的测量方法(中英文版) Testing method for contact resistance of precious metals electrical contact materials |
|||
YD/T 950-2008 电信中心内通信设备的过电压过电流抗力要求及试验方法(中英文版) Technical Specification and Testing Methods for Resistibility of Telecommunication Equipment Installed in a Communications Centre to Overvoltages and Overcurrents |
找到:717條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [19] [20] [21] [22] [23] [24] [25] |