中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 20321.2-2006
离网型风能、太阳能发电系统用逆变器 第2部分:试验方法(中英文版)
Inverter of wind and solar energy supply power system for off-grid - Part 2: Testing method
 
GB/T 16752-2006
混凝土和钢筋混凝土排水管试验方法(中英文版)
Test methods of concrete and reinforced concrete drainage and sewer pipes
 
GB/T 12581-2006
加抑制剂矿物油氧化特性测定法(中英文版)
Standard test method for oxidation characteristics of inhibited mineral oils
 
GB/T 20451-2006
活性炭球盘法强度测试方法(中英文版)
Test method for ball-pan hardness of activated carbon
 
GB/T 20450-2006
活性炭着火点测试方法(中英文版)
Test method for ignition temperature of activated carbon
 
GB/T 20449-2006
活性炭丁烷工作容量测试方法(中英文版)
Test method for butane work capacity of activated carbon
 
GB/T 20390.2-2006
纺织品 床上用品燃烧性能 第2部分:小火焰为点火源的可点燃性试验方法(中英文版)
Textiles―Burning behaviour of bedding items―Part 2: Test methods for the ignitability by a small open flame
 
GB/T 20390.1-2006
纺织品 床上用品燃烧性能 第1部分:香烟为点火源的可点燃性试验方法(中英文版)
Textiles―Burning behaviour of bedding items―Part 1: Test methods for the ignitability by a smouldering cigarette
 
GB/T 20170.1-2006
稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版)
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
 
GB 5135.13-2006
自动喷水灭火系统 第13部分:水幕喷头(中英文版)
Automatic sprinkler system Part 13:Performance requirements and test methods of drencher head
 
GB/T 20183.3-2006
植物保护机械 喷雾设备 第3部分:农业液力喷雾机每公顷施液量调节系统试验方法(中英文版)
Equipment for crop protection - Spraying equipment - Part 3: Test methods for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
 
GB/T 20405.5-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution
 
GB/T 20405.4-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating
 
GB/T 20405.3-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation
 
GB/T 20405.2-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers
 
GB/T 20405.1-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH
 
GB/T 6501-2006
羊毛纤维长度试验方法 梳片法(中英文版)
Test method for measure length of the wool fibre - Comb sorter method
 
GB/T 6098.1-2006
棉纤维长度试验方法 第1部分:罗拉式分析仪法(中英文版)
Test method for length of cotton fibres - Part 1: Roller analyser
 
GB/T 20136-2006
内燃机电站通用试验方法(中英文版)
Electric power plant with inernal combustion engines, general method of test for
 
GB/T 8489-2006
精细陶瓷压缩强度试验方法(中英文版)
Test method for compressive strength of fine ceramics (advanced ceramics, advanced technical ceramics)
 
GB/T 6569-2006
精细陶瓷弯曲强度试验方法(中英文版)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
 
GB/T 10700-2006
精细陶瓷弹性模量试验方法 弯曲法(中英文版)
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method
 
GB/T 1410-2006
固体绝缘材料体积电阻率和表面电阻率试验方法(中英文版)
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
 
GB/T 10581-2006
绝缘材料在高温下电阻和电阻率的试验方法(中英文版)
Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
 
GB/T 10064-2006
测定固体绝缘材料绝缘电阻的试验方法(中英文版)
Methods of test for the determination of the insulation resistance of solid insulating materials
 
GB/T 3810.7-2006
陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定(中英文版)
Test methods of ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles
 
GB/T 3810.6-2006
陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定(中英文版)
Test methods of ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles
 
GB/T 3810.1-2006
陶瓷砖试验方法 第1部分:抽样和接收条件(中英文版)
Test methods of ceramic tiles Part 1: Sampling and basis for acceptance
 
GB/T 3810.11-2006
陶瓷砖试验方法 第11部分:有釉砖抗釉裂性的测定(中英文版)
Test methods of ceramic tiles Part 11: Determination of crazing resistance for glazed tiles
 
GB/T 20102-2006
玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法(中英文版)
Test method for determining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution
 
GB/T 8243.6-2006
内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
 
GB/T 8243.5-2006
内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
 
GB/T 9973-2006
炭素材料透气度试验方法(中英文版)
Test method for permeability of carbon materials
 
GB/T 6242-2006
种植机械 马铃薯种植机 试验方法(中英文版)
Equipment for planting - Potato planters - Method of testing
 
GB/T 4510-2006
石油沥青脆点测定法#弗拉斯法(中英文版)
Test method for determination of breaking point of bitumen (Fraass method)
 
GB/T?20170.1-2006
稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版)
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
 
GB/T 19993-2005
冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法(中英文版)
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling
 
GB/T 19975-2005
高强化纤长丝拉伸性能试验方法(中英文版)
Test method of tensile properties for high tenacity filament yarn
 
GB/T 19973.2-2005
医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版)
Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process
 
GB/T 5334-2005
乘用车车轮性能要求和试验方法(中英文版)
Performance requirments and test methods of passenger car wheels
 
GB/T 5170.18-2005
电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments
 
GB/T 19936.1-2005
齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90(中英文版)
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils
 
GB/T 20024-2005
内燃机用橡胶和塑料燃油软管 可燃性试验方法(中英文版)
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability
 
GB/T 19816.7-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture
 
GB/T 19816.6-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter
 
GB/T 19816.5-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
 
GB/T 18570.9-2005
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法(中英文版)
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts
 
GB/T 18570.8-2005
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法(中英文版)
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture
 
GB/T 18570.5-2005
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法)(中英文版)
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method)
 
GB/T 18570.3-2005
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法)(中英文版)
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method)
 
GB/T 18570.10-2005
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法(中英文版)
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride
 
GB/T 6148-2005
精密电阻合金电阻温度系数测试方法(中英文版)
Test method for temperature-resistance coefficient of precision resistance alloys
 
GB/T 6147-2005
精密电阻合金热电动势率 测试方法(中英文版)
Test method for thermoelectric power of precision resistance alloys
 
GB/T 5170.20-2005
电工电子产品环境试验设备 基本参数检定方法 水试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments
 
GB/T 5170.19-2005
电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments
 
GB/T 5170.17-2005
电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments
 
GB 16155-2005
民用水暖煤炉热性能试验方法(中英文版)
Test method for heating performance of civil water heating coal stove
 
GB/T 8625-2005
建筑材料难燃性试验方法(中英文版)
Test method of difficult-flammability for building materials
 
GB/T 10901-2005
离心机 性能测试方法(中英文版)
Methods of Performance testing for centrifuge
 
GB/T 7998-2005
铝合金晶间腐蚀测定方法(中英文版)
Test method for intergranular corrosion of aluminium alloy
 
GB/T 5270-2005
金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述(中英文版)
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
 
GB/T 19816.4-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density
 
GB/T 19816.3-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness
 
GB/T 19816.2-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution
 
GB/T 19816.1-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling
 
GB/T 19789-2005
包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法(中英文版)
Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor
 
GB/T 11081-2005
白油紫外吸光度测定法(中英文版)
Standard Test Method for Ultraviolet Adsorption of White Oils
 
GB/T 8924-2005
纤维增强塑料燃烧性能试验方法 氧指数法(中英文版)
Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method
 
GB/T 7559-2005
纤维增强塑料层合板 螺栓连接挤压强度试验方法(中英文版)
Test method for bearing strength by bolted joints of fiber reinforced plastics laminates
 
GB/T 6058-2005
纤维缠绕压力容器制备和内压试验方法(中英文版)
Test method for preparation and internal pressure testing of filament-wound pressure vessels
 
GB/T 6011-2005
纤维增强塑料燃烧性能试验方法 炽热棒法(中英文版)
Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method
 
GB/T 4944-2005
玻璃纤维增强塑料层合板层间拉伸强度 试验方法(中英文版)
Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
 
GB/T 3857-2005
玻璃纤维增强热固性塑料耐化学介质性能试验方法(中英文版)
Test method for chemical resistance of glass fiber reinforced thermosetting plastics
 
GB/T 3856-2005
单向纤维增强塑料平板压缩性能试验方法(中英文版)
Test method for compression properties of unidirectional fiber reinforced plastics
 
GB/T 3855-2005
碳纤维增强塑料树脂含量试验方法(中英文版)
Test method for resin content of carbon fiber reinforced plastics
 
GB/T 3854-2005
增强塑料巴柯尔硬度试验方法(中英文版)
Test method for hardness of reinforced plastics by means of a Barcol impresser
 
GB/T 3362-2005
碳纤维复丝拉伸性能试验方法(中英文版)
Test methods for tensile properties of carbon fiber multifilament
 
GB/T 2577-2005
玻璃纤维增强塑料树脂含量试验方法(中英文版)
Test method for resin content of glass fiber reinforced plastics
 
GB/T 2576-2005
纤维增强塑料树脂不可溶分含量试验方法(中英文版)
Test method for insoluble matter content of resin rsed in fiber reinforced plastics
 
GB/T 1464-2005
夹层结构或芯子密度试验方法(中英文版)
Test method for density of sandwich construction or cores
 
GB/T 1463-2005
纤维增强塑料密度和相对密度试验方法(中英文版)
Test methods for density and relative density of fiber reinforced plastics
 
GB/T 1462-2005
纤维增强塑料吸水性试验方法(中英文版)
Test methods for water absorption of fiber reinforced plastics
 
GB/T 1457-2005
夹层结构滚筒剥离强度试验方法(中英文版)
Test method for climbing drum peel strength of sandwich constructions
 
GB/T 1456-2005
夹层结构弯曲性能试验方法(中英文版)
Test method for flexural properties of sandwich constructions
 
GB/T 1455-2005
夹层结构或芯子剪切性能试验方法(中英文版)
Test method for shear properties of sandwich constructions or cores
 
GB/T 1454-2005
夹层结构侧压性能试验方法(中英文版)
Test method for edgewise compressive properties of sandwich constructions
 
GB/T 1453-2005
夹层结构或芯子平压性能试验方法(中英文版)
Test method for flatwise compression properties of sandwich constructions or cores
 
GB/T 1452-2005
夹层结构平拉强度试验方法(中英文版)
Test method for flatwise tension strength of sandwich constructions
 
GB/T 19700-2005
船用热交换器热工性能试验方法(中英文版)
Test method of thermal property for marine heat exchanger
 
GB/T 5170.16-2005
电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机(中英文版)
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test
 
GB/T 5170.15-2005
电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台(中英文版)
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test
 
GB/T 5170.13-2005
电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台(中英文版)
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test
 
GB/T 2419-2005
水泥胶砂流动度测定方法(中英文版)
Test method for fluidity of cement mortar
 
GB/T 1345-2005
水泥细度检验方法 筛析法(中英文版)
The test sieving method for fineness of cement
 
GB/T 12957-2005
用于水泥混合材的工业废渣活性试验方法(中英文版)
Test method for activity of industrial waste slag used as addition to cement
 
GB/T 2423.53-2005
电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损(中英文版)
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
 
GB/T 19603-2004
塑料无滴薄膜无滴性能试验方法(中英文版)
Test method for drop-proof properties ofdrop-proof plastic films
 
GB/T 19599.2-2004
合成纤维渔网片试验方法 网片尺寸(中英文版)
Testing method for fishing nets of synthetic fibre--Size of netting
 
GB/T 19599.1-2004
合成纤维渔网片试验方法 网片重量(中英文版)
Testing method for fishing nets of synthetic fibre--Weight of netting
 
GB/T 5822.2-2004
铁路内燃机车柴油机油 石油醚不溶物测定方法(中英文版)
Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine
 

找到:2825條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [19] [20] [21] [22] [23] [24] [25]