中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
FZ/T 93086.1-2012 集聚纺纱用网格圈试验方法 第1部分:内周长(中英文版) Testing method of lattice apron for compact spinning process. Part 1: Inner perimeter |
|||
SN/T 3389-2012 食品接触材料 金属基聚合物涂层 总迁移试验条件和方法选择指南(中英文版) Food contact materials. Polymeric coatings on metal substrates. Guide to the selection of conditions and test methods for overall migration |
|||
JJF 1372-2012 贯入式砂浆强度检测仪校准规范(中英文版) Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method |
|||
GB/T 6097-2012 棉纤维试验取样方法(中英文版) Sampling method for testing of cotton fibers |
|||
GB/T 28872-2012 活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法(中英文版) Testing method of magnetic lightly-striking mode atomic force microscope for nanotopography of living cells |
|||
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
|||
GB/T 28861-2012 环氧粉末包封料熔融流动性试验方法(中英文版) Test method for measuring melt fluidity of encapsulating material of powdered epoxy |
|||
GB/T 28860-2012 环氧粉末包封料胶化时间测定方法(中英文版) Test method for the determination of get time of encapsulating material of powdered epoxy |
|||
SB/T 10796-2012 远置式机械通风蒸发式制冷剂冷凝器试验室试验方法(中英文版) Methods of laboratory testing remote mechanical-draft evaporative refrigerant condensers |
|||
SY/T 0041-2012 防腐涂料与金属粘结的剪切强度试验方法(中英文版) Standard test method for apparent shear strength of coatings to metal |
|||
SY/T 6898-2012 火烧油层基础参数测定方法(中英文版) Experimental testing method of in-situ combustion parameters |
|||
SY/T 0085-2012 管道防腐层自然气候暴露试验方法(中英文版) Standard test method for outdoor weathering exposure of pipeline coatings |
|||
SY/T 5268-2012 油气田电网线损率测试和计算方法(中英文版) Method for testing and calculating rate of transmission losses in oil-gas field electrical power network |
|||
GB/T 28638-2012 城镇供热管道保温结构散热损失测试与保温效果评定方法(中英文版) Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes |
|||
GB/T 28487-2012 贵金属及其合金链 抗拉强度的测定 拉伸试验法(中英文版) Precious metal alloys chains - Determination of tensile strength - Method of tensile testing |
|||
GB/T 9292-2012 表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法(中英文版) Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition |
|||
FZ/T 50007-2012 氨纶丝弹性试验方法(中英文版) Testing method for elasticity of spandex filament yarns |
|||
HG/T 4303-2012 表面硬化聚酯薄膜 耐磨性测定方法(中英文版) Test method of resistance to abrasion for hard-coating polyester film |
|||
QB/T 4298-2012 工业用缝纫机 高、低速缝纫线迹长度相对误差试验方法(中英文版) Testing method of relative tolerance of sewing machine high and low speed stitch length |
|||
QB/T 4297-2012 缝纫机紧固件锁紧力试验方法(中英文版) Testing method of locking force for fastening piece of sewing machine |
找到:974條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [15] [16] [17] [18] [19] [20] [21] |