中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 20671.2-2006
非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials
 
GB/T 20671.4-2006
非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials
 
GB/T 20671.5-2006
非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials
 
GB/T 20671.6-2006
非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces
 
GB/T 20671.8-2006
非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials
 
GB/T 20671.7-2006
非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials
 
GB/T 20631.2-2006
电气用压敏胶粘带 第2部分:试验方法(中英文版)
Pressure sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
 
GB/T 20630.2-2006
聚酯纤维机织带规范 第2部分:试验方法(中英文版)
Specification for polyester fibre woven tapes - Part 2: Methods of test
 
GB/T 20628.2-2006
电气用纤维素纸 第2部分:试验方法(中英文版)
Cellulosic papers for electrical purposes - Part 2: Methods of test
 
GB/T 20627.2-2006
玻璃及玻璃聚酯纤维机织带规范 第2部分:试验方法(中英文版)
Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test
 
GB/T 1408.2-2006
绝缘材料电气强度试验方法 第2部分:对应用直流电压试验的附加要求(中英文版)
Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
 
GB/T 1408.1-2006
绝缘材料电气强度试验方法 第1部分:工频下试验(中英文版)
Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies
 
GB/T 14282.1-2006
仪表着陆系统(ILS) 第1部分:下滑信标性能要求和测试方法(中英文版)
Instrument landing system (ILS) - Part 1: Performance requirements and test methods of glide path beacon
 
GB/T 5242-2006
硬质合金制品检验规则与试验方法(中英文版)
Check rules and test methods of cemented carbide products
 
GB/T 12684-2006
工业硼化物 分析方法(中英文版)
Methods of test for boron compound for industrial use
 
GB/T 3318-2006
电力机车制成后投入使用前的试验方法(中英文版)
Test methods for electric locomotives on completion of construction and before entry into service
 
GB/T 3315-2006
内燃机车制成后投入使用前的试验方法(中英文版)
Test methods for diesel locomotives on completion of construction and before entry into service
 
GB/T 20390.1-2006
纺织品 床上用品燃烧性能 第1部分:香烟为点火源的可点燃性试验方法(中英文版)
Textiles―Burning behaviour of bedding items―Part 1: Test methods for the ignitability by a smouldering cigarette
 
GB/T 20390.2-2006
纺织品 床上用品燃烧性能 第2部分:小火焰为点火源的可点燃性试验方法(中英文版)
Textiles―Burning behaviour of bedding items―Part 2: Test methods for the ignitability by a small open flame
 
GB/T 20170.1-2006
稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版)
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
 
GB 5135.13-2006
自动喷水灭火系统 第13部分:水幕喷头(中英文版)
Automatic sprinkler system Part 13:Performance requirements and test methods of drencher head
 
GB/T 20183.3-2006
植物保护机械 喷雾设备 第3部分:农业液力喷雾机每公顷施液量调节系统试验方法(中英文版)
Equipment for crop protection - Spraying equipment - Part 3: Test methods for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
 
GB/T 20405.5-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution
 
GB/T 20405.4-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating
 
GB/T 20405.3-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation
 
GB/T 20405.2-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers
 
GB/T 20405.1-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH
 
GB/T 10700-2006
精细陶瓷弹性模量试验方法 弯曲法(中英文版)
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method
 
GB/T 1410-2006
固体绝缘材料体积电阻率和表面电阻率试验方法(中英文版)
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
 
GB/T 10064-2006
测定固体绝缘材料绝缘电阻的试验方法(中英文版)
Methods of test for the determination of the insulation resistance of solid insulating materials
 
GB/T 3810.13-2006
陶瓷砖试验方法 第13部分:耐化学腐蚀性的测定(中英文版)
Test methods of ceramic tiles Part 13: Determination of chemical resistance
 
GB/T 8243.5-2006
内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
 
GB/T 8243.6-2006
内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
 
GB/T 3810.10-2006
陶瓷砖试验方法 第10部分:湿膨胀的测定(中英文版)
Test methods of ceramic tiles Part 10: Determination of moisture expansion
 
GB/T 3810.11-2006
陶瓷砖试验方法 第11部分:有釉砖抗釉裂性的测定(中英文版)
Test methods of ceramic tiles Part 11: Determination of crazing resistance for glazed tiles
 
GB/T 3810.1-2006
陶瓷砖试验方法 第1部分:抽样和接收条件(中英文版)
Test methods of ceramic tiles Part 1: Sampling and basis for acceptance
 
GB/T 3810.4-2006
陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定(中英文版)
Test methods of ceramic tiles Part 4: Determination of modulus of rupture and breaking strength
 
GB/T 3810.12-2006
陶瓷砖试验方法 第12部分:抗冻性的测定(中英文版)
Test methods of ceramic tiles Part 12: Determination of frost resistance
 
GB/T 3810.14-2006
陶瓷砖试验方法 第14部分:耐污染性的测定(中英文版)
Test methods of ceramic tiles Part 14: Determination of resistance to stains
 
GB/T 3810.15-2006
陶瓷砖试验方法 第15部分:有釉砖铅和镉溶出量的测定(中英文版)
Test methods of ceramic tiles Part 15: Determination of lead and cadmium given off by glazed tiles
 
GB/T 3810.2-2006
陶瓷砖试验方法 第2部分:尺寸和表面质量的检验(中英文版)
Test methods of ceramic tiles Part 2: Determination of dimensions and surface quality
 
GB/T 3810.5-2006
陶瓷砖试验方法 第5部分:用恢复系数确定砖的抗冲击性(中英文版)
Test methods of ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution
 
GB/T 3810.6-2006
陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定(中英文版)
Test methods of ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles
 
GB/T 3810.7-2006
陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定(中英文版)
Test methods of ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles
 
GB/T 3810.8-2006
陶瓷砖试验方法 第8部分:线性热膨胀的测定(中英文版)
Test methods of ceramic tiles Part 8: Determination of linear thermal expansion
 
GB/T 3810.9-2006
陶瓷砖试验方法 第9部分:抗热震性的测定(中英文版)
Test methods of ceramic tiles Part 9: Determination of resistance to thermal shock
 
GB/T 3810.16-2006
陶瓷砖试验方法 第16部分:小色差的测定(中英文版)
Test methods of ceramic tiles Part 16: Determination of small colour differences
 
GB/T 20432.4-2006
摄影 照相级化学品 试验方法 第4部分: 灼烧残渣的测定(中英文版)
Photography―Photographic-grade chemicals―Test methods―Part 4: Determination of residue after ignition
 
GB/T?20170.1-2006
稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版)
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
 
GB/T 19973.2-2005
医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版)
Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process
 

找到:1202條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [15] [16] [17] [18] [19] [20] [21]