中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 27662-2011 激光光束指向和位置稳定性测试方法(中英文版) Test methods for pointing and positional stability of laser beam |
|||
GB/T 28043-2011 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparisons |
|||
GB/T 26919-2011 选煤厂 煤泥水自然沉降试验方法(中英文版) Coal preparation plant - Methods for the natural falling testing of slurry |
|||
GB/T 26829-2011 脉冲激光测距仪测距参数的室内测试方法(中英文版) Indoor method for testing measurement range of pulse laser rangfinders |
|||
GB/T 1346-2011 水泥标准稠度用水量、凝结时间、安定性检验方法(中英文版) Test methods for water requirement of normal consistency, setting time and soundness of the portland cement |
|||
GB/T 17491-2011 液压泵、马达和整体传动装置 稳态性能的试验及表达方法(中英文版) Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance |
|||
GB/T 26592-2011 无损检测仪器 工业X射线探伤机 性能测试方法(中英文版) Non-destructive testing instruments - Properties test methods of industrial X-ray apparatus |
|||
GB/T 26593-2011 无损检测仪器 工业用X射线CT装置性能测试方法(中英文版) Non-destructive testing instruments - Properties test method for performance of industrial X-ray computed tomography(CT)equipment |
|||
GB/T 26594-2011 无损检测仪器 工业用X射线管性能测试方法(中英文版) Non-destructive testing instruments - Properties test methods of industrial X-ray tube |
|||
GB/T 14057.2-2011 放射性污染表面去污 第2部分:纺织品去污剂的试验方法(中英文版) Decontamination of radioactively contaminated surface - Part 2:Testing method of decontamination agents for textiles |
|||
GB/T 26642-2011 无损检测 金属材料计算机射线照相检测方法(中英文版) Non-destructive testing - Test method for computed radiography of metallic materials |
|||
GB/T 26646-2011 无损检测 小型部件声发射检测方法(中英文版) Non-destructive testing - Test method of acoustic emission testing of small parts |
|||
GB/T 26597-2011 光学纤维传像元件试验方法(中英文版) Testing method of fiber optic devices for image transmission |
|||
GB/T 27408-2010 实验室质量控制 非标准测试方法的有效性评价 线性关系(中英文版) Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship |
|||
GB/T 12085.1-2010 光学和光学仪器 环境试验方法 第1部分:术语、试验范围(中英文版) Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing |
|||
GB 26445-2010 危险货物运输 物品、包装物品或包装物质可运输性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to article, packaged article or packaged substance for transport |
|||
GB/T 17178.6-2010 信息技术 开放系统互连 一致性测试方法和框架 第6部分:协议轮廓测试规范(中英文版) Information technology - Open system interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification |
|||
GB/T 26194-2010 蓄冷系统性能测试方法(中英文版) Method of testing the performance of cool storage systems |
|||
GB 26444-2010 危险货物运输 物质可运输性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to substances for transport |
|||
GB 26447-2010 危险货物运输 能够自持分解的硝酸铵化肥的分类程序、试验方法和判据(中英文版) Transport of dangerous goods - Classification procedures,test methods relating to ammonium nitrate fertilizers capable of self-sustaining decomposition |
|||
GB 26448-2010 危险货物运输 炸药中间体(ANE)的敏感性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to the sensitivity of ammonium nitrate emulsions, suspension or gels, intermediate for blasting explosives(ANE) |
|||
GB/T 20875.2-2010 电气绝缘材料水解稳定性试验方法 第2部分:热固性模塑材料(中英文版) Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets |
|||
GB/T 12967.7-2010 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus |
|||
GB 26446-2010 危险货物运输 排除物质爆炸性的试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to the explosive substance excluded |
|||
GB/T 3310-2010 铜及铜合金棒材超声波探伤方法(中英文版) Ultrasonic testing method of copper and copper alloy bars |
|||
GB/T 26117-2010 微型电泵 试验方法(中英文版) Testing method of micro electricpump |
|||
GB/T 26106-2010 机械镀锌层 技术规范和试验方法(中英文版) Mechanically deposited coatings of zinc - Specification and test methods |
|||
GB/T 25858-2010 精密空调机组性能测试方法(中英文版) Performance testing method of precision air conditioning unit |
|||
GB/T 26085-2010 船舶防污漆锡总量的测试及判定(中英文版) Test method and determination of total tin in antifouling paints for ship |
|||
GB/T 25967-2010 带辅助能源的家用太阳能热水系统热性能试验方法(中英文版) Test methods for thermal performance of domestic solar-plus-supplementary water heating systems |
|||
GB/T 25758.1-2010 无损检测 工业X射线系统焦点特性 第1部分:扫描方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method |
|||
GB/T 25774.1-2010 焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验(中英文版) Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys |
|||
GB/T 25774.3-2010 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验(中英文版) Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint |
|||
GB/T 25757-2010 无损检测 钢管自动漏磁检测系统综合性能测试方法(中英文版) Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes |
|||
GB/T 25758.2-2010 无损检测 工业X射线系统焦点特性 第2部分:针孔照相机射线照相方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method |
|||
GB/T 25758.3-2010 无损检测 工业X射线系统焦点特性 第3部分:狭缝照相机射线照相方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method |
|||
GB/T 25758.4-2010 无损检测 工业X射线系统焦点特性 第4部分:边缘方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method |
|||
GB/T 228.1-2010 金属材料 拉伸试验 第1部分:室温试验方法(中英文版) Metallic materials - Tensile testing - Part 1 : Method of test at room temperature |
|||
GB/T 14999.7-2010 高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法(中英文版) Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings |
|||
GB/T 25480-2010 仪器仪表运输、贮存基本环境条件及试验方法(中英文版) Basic environmental conditions and testing methods for transportation and storage of instruments |
|||
GB/T 25414-2010 棉花种植用地膜厚度限值及测定(中英文版) Thickness limit and test method of mulch film for cotton planting |
|||
GB/T 25217.1-2010 冲击地压测定、监测与防治方法 第1部分:顶板岩层冲击倾向性分类及指数的测定方法(中英文版) Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata |
|||
GB/T 18443.1-2010 真空绝热深冷设备性能试验方法 第1部分:基本要求(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 1: Basic requirements |
|||
GB/T 18443.2-2010 真空绝热深冷设备性能试验方法 第2部分:真空度测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 2:Vacuum degree measurement |
|||
GB/T 18443.3-2010 真空绝热深冷设备性能试验方法 第3部分:漏率测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 3: Leak rate measurement |
|||
GB/T 18443.4-2010 真空绝热深冷设备性能试验方法 第4部分:漏放气速率测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 4: Leak-outgassing rate measurement |
|||
GB/T 18443.5-2010 真空绝热深冷设备性能试验方法 第5部分:静态蒸发率测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 5: Static evaporation rate measurement |
|||
GB/T 18443.6-2010 真空绝热深冷设备性能试验方法 第6部分:漏热量测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 6: Heat-leak rate measurement |
|||
GB/T 18443.8-2010 真空绝热深冷设备性能试验方法 第8部分:容积测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 8: Volume measurement |
|||
GB/T 13929-2010 水环真空泵和水环压缩机 试验方法(中英文版) Methods of testing for water-ring vacuum pumps and compressors |
|||
GB/T 25217.2-2010 冲击地压测定、监测与防治方法 第2部分:煤的冲击倾向性分类及指数的测定方法(中英文版) Methods for test,monitoring and prevention of rock burst - Part 2: Classification and laboratory test method on bursting liability of coal |
|||
GB/T 18443.7-2010 真空绝热深冷设备性能试验方法 第7部分:维持时间测量(中英文版) Testing method of performance for vacuum insulation cryogenic equipment - Part 7: Holding time measurement |
|||
GB/T 25013-2010 船舶和海上技术 高速船夜视仪 操作与性能要求、试验方法和要求的试验结果(中英文版) Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements,methods of testing and required test result |
|||
GB/T 24644-2009 农林拖拉机落物防护装置 试验方法和性能要求(中英文版) Testing method and performance requirement of falling object protective - Structures on agricultural and forestry tractors |
|||
GB/T 1554-2009 硅晶体完整性化学择优腐蚀检验方法(中英文版) Testing method for crystallographic perfection of silicon by preferential etch techniques |
|||
GB/T 24523-2009 金属材料快速压痕(布氏)硬度试验方法(中英文版) Test method for rapid indentation (Brinell) hardness testing of metallic materials |
|||
GB/T 20935.2-2009 金属材料电磁超声检验方法 第2部分:利用电磁超声换能器技术进行超声检测的方法(中英文版) Method of electromagnetic acoustic inspection for metal materials - Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer(EMAT)techniques |
|||
GB/T 15912.1-2009 制冷机组及供制冷系统节能测试 第1部分:冷库(中英文版) Monitoring and testing method for energy conservation of refrigerating systems - Part 1: Cold storage systems |
|||
GB/T 24326-2009 纸浆 物理试验用实验室纸页的制备 快速凯塞法(中英文版) Pulps - Preparation of laboratory sheets for physical testing - Rapid-Kothen method |
|||
GB/T 24324-2009 纸浆 物理试验用实验室纸页的制备 常规纸页成型器法(中英文版) Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method |
|||
GB 24429-2009 运动头盔 自行车、滑板、轮滑运动头盔的安全要求和试验方法(中英文版) Sports helmets - Safety requirements and testing methods for sports helmets for cyclists and users of skateboards and roller skates |
|||
GB/T 24365-2009 通信用光电探测器组件测试方法(中英文版) Testing methods of optoelectronic detector module for communication |
|||
GB/T 18359-2009 中小学教科书用纸、印制质量要求和检验方法(中英文版) General requirements and test methods of paper and printing qualities for primary and secondary school textbooks |
|||
GB/T 24196-2009 金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则(中英文版) Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
|||
GB/T 12705.2-2009 纺织品 织物防钻绒性试验方法 第2部分:转箱法(中英文版) Textile - Methods of testing the down-proof properties of fabrics - Part 2: Tumble test |
|||
GB/T 12705.1-2009 纺织品 织物防钻绒性试验方法 第1部分:摩擦法(中英文版) Textile - Methods of testing the down-proof properties of fabrics - Part 1: Rubbing test |
|||
GB/T 24128-2009 塑料防霉性能试验方法(中英文版) Method for testing resistance of plastics to mold |
|||
GB/T 24127-2009 塑料抗藻性能试验方法(中英文版) Testing method for determining algal resistance of plastics |
|||
GB/T 24129-2009 胶鞋、运动鞋外底不留痕试验方法(中英文版) Testing method for the non-marking outsole of rubber shoes and sports shoes |
|||
GB/T 5019.2-2009 以云母为基的绝缘材料 第2部分:试验方法(中英文版) Specification for insulating materials based on mica - Part 2: Methods of test |
|||
GB/T 5132.2-2009 电气用热固性树脂工业硬质圆形层压管和棒 第2部分:试验方法(中英文版) Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
|||
GB/T 5170.14-2009 环境试验设备基本参数检验方法 振动(正弦)试验用电动振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments - Electrodynamic vibrating type machines for vibration(sinusoidal) test |
|||
GB/T 13465.6-2009 不透性石墨管水压爆破试验方法(中英文版) Test method for hydraulic pressure bursting of impermeable graphite pipe |
|||
GB/T 10179-2009 液压伺服振动试验设备 特性的描述方法(中英文版) Servo-hydraulic test equipment for generating vibration - Method of describing characteristics |
|||
GB/T 22846-2009 针织布(四分制)外观检验(中英文版) Test methods of four points system for visually inspecting knitted fabrics |
|||
GB/T 23683-2009 制冷剂毛细管流量的试验方法(中英文版) Method of testing flow capacity of refrigerant capillary tubes |
|||
GB/T 23604-2009 钛及钛合金产品力学性能试验取样方法(中英文版) Methods of sampling for mechanical properties testing of titanium and titanium alloy products |
|||
GB/T 23524-2009 石油化工废催化剂中铂含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of spent petrochemical catalyst - Determination of platinum - Inductively coupled plasma atomic emision spectrometry |
|||
GB/T 4909.12-2009 裸电线试验方法 第12部分:镀层可焊性试验-焊球法(中英文版) Test methods for bare wires - Part 12: Solderability test of coating - Solder globule method |
|||
GB/T 4909.11-2009 裸电线试验方法 第11部分:镀层附着性试验(中英文版) Test methods for bare wires - Part 11: Test for adherence of coating |
|||
GB/T 4909.10-2009 裸电线试验方法 第10部分:镀层连续性试验 过硫酸铵法(中英文版) Test methods for bare wires - Part 10: Test for continuity of coating - Ammonium persulphate solution method |
|||
GB/T 4909.9-2009 裸电线试验方法 第9部分:镀层连续性试验 多硫化钠法(中英文版) Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method |
|||
GB/T 21956.4-2009 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分:后置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS |
|||
GB/T 1938-2009 木材顺纹抗拉强度试验方法(中英文版) Method of testing in tensile strength parallel to grain of wood |
|||
GB/T 1939-2009 木材横纹抗压试验方法(中英文版) Method of testing in compression perpendicular to grain of wood |
|||
GB/T 14017-2009 木材横纹抗拉强度试验方法(中英文版) Method of testing in tensile strength perpendicular to grain of wood |
|||
GB/T 1937-2009 木材顺纹抗剪强度试验方法(中英文版) Method of testing in shearing strength parallel to grain of wood |
|||
GB/T 1935-2009 木材顺纹抗压强度试验方法(中英文版) Method of testing in compressive strength parallel to grain of wood |
|||
GB/T 14018-2009 木材握钉力试验方法(中英文版) Method of testing nail holding power of wood |
|||
GB/T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台(中英文版) Inspection methods for basic parameters of environmental testing equipments - Hydraulic vibrating type machines for vibration(random) test |
|||
GB 23177-2008 举重杠铃的安全、性能要求和试验方法(中英文版) The safety and capability requirements and testing methods for barbell of weightlifting |
|||
GB/T 5169.26-2008 电工电子产品着火危险试验 第26部分:烟模糊 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products - Part 26: Smoke obscuration - Summary and relevance of test methods |
|||
GB/T 5169.30-2008 电工电子产品着火危险试验 第30部分:热释放 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products - Part 30: Heat release - Summary and relevance of test methods |
|||
GB/T 22759-2008 家用和类似用途的制冷器具可靠性试验方法(中英文版) Test methods for reliability of household and similar refrigerating appliances |
|||
GB/T 22906.3-2008 纸芯的测定 第3部分:水分含量的测定(烘箱干燥法)(中英文版) Testing of cores - Part 3: Determination of moisture content using the oven drying method |
|||
GB/T 22906.7-2008 纸芯的测定 第7部分:弹性模量的测定(三点法)(中英文版) Testing of cores - Part 7: Determination of flexural modulus by the three-point method |
|||
GB/T 22638.4-2008 铝箔试验方法 第4部分:表面润湿张力的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 4: Determination of surface wetting tension |
|||
GB/T 22638.10-2008 铝箔试验方法 第10部分:涂层表面密度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 10: Determination of mass per unit area (surface density) of coatings |
|||
GB/T 22567-2008 电气绝缘材料 测定玻璃化转变温度的试验方法(中英文版) Electrical insulating materials - Methods of test for the determination of the glass transition temperature |
|||
GB/T 13754-2008 采暖散热器散热量测定方法(中英文版) Test methods of thermal output of heating radiators |
|||
GB/T 13823.20-2008 振动与冲击传感器校准方法 加速度计谐振测试 通用方法(中英文版) Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods |
|||
GB/T 10066.9-2008 电热装置的试验方法 第9部分:高频介质加热装置输出功率的测定(中英文版) Test methods for electroheat installtions - Part 9: The determination of power output for High-frequency dielectric heating installation |
|||
GB/T 10066.6-2008 电热装置的试验方法 第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output |
|||
GB/T 10175.1-2008 土方机械 装载机和挖掘装载机 第1部分:额定工作载荷的计算和验证倾翻载荷计算值的测试方法(中英文版) Earth moving machinery - Loaders and backhoe loaders - Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load |
|||
GB/T 22316-2008 电镀锡钢板耐腐蚀性试验方法(中英文版) Test methods of corrosion resistance for electrolytic tinplate |
|||
GB/T 1838-2008 电镀锡钢板镀锡量试验方法(中英文版) Test methods of tin coating mass for electrolytic tinplate |
|||
GB/T 6384-2008 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法(中英文版) The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures |
|||
GB/T 8484-2008 建筑外门窗保温性能分级及检测方法(中英文版) Graduation and test method for thermal insulating properties of doors and windows |
|||
GB/T 3691-2008 钢丝网水泥板力学性能试验方法(中英文版) Mechanical properties testing method of steel wool cement tile |
|||
GB/T 8171-2008 使用缓冲包装材料进行的产品机械冲击脆值试验方法(中英文版) Test method for mechanical shock fragility rating of products using packaging cushioning materials |
|||
GB/T 8167-2008 包装用缓冲材料动态压缩试验方法(中英文版) Testing method of dynamic compression for packaging cushioning materials |
|||
GB/T 7121.2-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分:后置式动态试验方法(中英文版) The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method |
|||
GB/T 14057.1-2008 放射性污染表面去污 第1部分:试验与评价去污难易程度的方法(中英文版) Decontamination of radioactively contaminated surfaces - Part 1: Method for testing and assessing the ease of decontamination |
|||
GB/T 11809-2008 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验(中英文版) Test method of weld of fuel rod for PWR - Metallographic examination and radiographic testing |
|||
GB/T 749-2008 水泥抗硫酸盐侵蚀试验方法(中英文版) Test method for determining capability of resisting sulfate corrode of cement |
|||
GB/T 15738-2008 导电和抗静电纤维增强塑料电阻率试验方法(中英文版) Test method for resistivity of conducting and antistatic fiber reinforced plastics |
|||
GB/T 2567-2008 树脂浇铸体性能试验方法(中英文版) Test methods for properties of resin casting boby |
|||
GB/T 8411.2-2008 陶瓷和玻璃绝缘材料 第2部分:试验方法(中英文版) Ceramic and glass insulating materials - Part 2: Methods of test |
|||
GB/T 16777-2008 建筑防水涂料试验方法(中英文版) Test methods for building waterproofing coatings |
|||
GB/T 2951.14-2008 电缆和光缆绝缘和护套材料通用试验方法 第14部分:通用试验方法 低温试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature |
|||
GB/T 2951.51-2008 电缆和光缆绝缘和护套材料通用试验方法 第51部分:填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component |
|||
GB/T 2951.12-2008 电缆和光缆绝缘和护套材料通用试验方法 第12部分:通用试验方法 热老化试验方法(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 12:Methods for general application - Thermal ageing methods |
|||
GB/T 2951.11-2008 电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
|||
GB/T 2951.13-2008 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test |
|||
GB/T 2951.21-2008 电缆和光缆绝缘和护套材料通用试验方法 第21部分:弹性体混合料专用试验方法 耐臭氧试验-热延伸试验-浸矿物油试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 21:Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
|||
GB/T 2951.31-2008 电缆和光缆绝缘和护套材料通用试验方法 第31部分:聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking |
|||
GB/T 2951.32-2008 电缆和光缆绝缘和护套材料通用试验方法 第32部分:聚氯乙烯混合料专用试验方法 失重试验 热稳定性试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 32:Methods specific to PVC ompounds - Loss of mass test - Thermal stability test |
|||
GB/T 2951.42-2008 电缆和光缆绝缘和护套材料通用试验方法 第42部分:聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi |
|||
GB/T 14812-2008 热管传热性能试验方法(中英文版) Testing method for heat transfer performance of heat pipes |
|||
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
|||
GB/T 14335-2008 化学纤维 短纤维线密度试验方法(中英文版) Testing method for linear density of man-made staple fibres |
|||
GB/T 14336-2008 化学纤维 短纤维长度试验方法(中英文版) Testing method for length of man-made staple fibres |
|||
GB/T 14339-2008 化学纤维 短纤维疵点试验方法(中英文版) Testing method for defect of man-made staple fibres |
|||
GB/T 14337-2008 化学纤维 短纤维拉伸性能试验方法(中英文版) Testing method for tensile properties of man-made staple fibres |
|||
GB/T 14338-2008 化学纤维 短纤维卷曲性能试验方法(中英文版) Testing method for crimping performance of man-made staple fibres |
|||
GB/T 5125-2008 有色金属冲杯试验方法(中英文版) Method for deep drawing cups testing of non-ferrous metals |
|||
GB/T 8169-2008 包装用缓冲材料振动传递特性试验方法(中英文版) Testing method of vibration transmissibility for packaging cushioning materials |
|||
GB/T 8168-2008 包装用缓冲材料静态压缩试验方法(中英文版) Testing method of static compression for packaging cushioning materials |
|||
GB/T 12967.6-2008 铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method |
|||
GB/T 12967.3-2008 铝及铝合金阳极氧化膜检测方法 第3部分:铜加速乙酸盐雾试验(CASS试验)(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 3 : Copper accelerated acetic acid salt spray test(CASS test) |
|||
GB/T 12967.2-2008 铝及铝合金阳极氧化膜检测方法 第2部分:用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus |
|||
GB/T 12967.1-2008 铝及铝合金阳极氧化膜检测方法 第1部分:用喷磨试验仪测定阳极氧化膜的平均耐磨性(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus |
|||
GB/T 7121.1-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法(中英文版) The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS |
|||
GB/T 14321-2008 刚玉磨料中α-Al2O3相X射线定量测定方法(中英文版) Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer |
|||
GB/T 21956.1-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS |
|||
GB/T 21956.2-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS |
|||
GB/T 21960-2008 农林拖拉机驾驶座试验方法和验收条件(中英文版) The testing method and accepting condition of the driver’s seat on agricultural and forestry tractors |
|||
GB/T 21956.3-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS |
|||
GB/T 1839-2008 钢产品镀锌层质量试验方法(中英文版) Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products |
|||
GB/T 13813-2008 煤矿用金属材料摩擦火花安全性试验方法和判定规则(中英文版) Testing method and judging rule of safety to friction spark of metallic material for coal mine |
找到:631條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |