中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 41144-2021 放射性气溶胶的通风防护衣要求与测试方法(中英文版) Requirements and test methods for ventilated protective clothing against radioactive aerosol |
|||
GB/T 7363-2021 石油蜡中稠环芳烃试验法(中英文版) Test method for polynuclear aromatics in petroleum wax |
|||
GB/T 1001.1-2021 标称电压高于1 000V的架空线路绝缘子 第1部分:交流系统用瓷或玻璃绝缘子元件 定义、试验方法和判定准则(中英文版) Insulators for overhead lines with a nominal voltage above 1 000V—Part 1:Ceramic or glass insulator units for a.c.systems—Definitions,test methods and acceptance criteria |
|||
GB/T 32065.11-2021 海洋仪器环境试验方法 第11部分:冲击与碰撞试验(中英文版) Environmental test methods for oceanographic instruments—Part 11:Shock and bump test |
|||
GB/T 41055-2021 预应力钢筒混凝土管无损检测(远场涡流电磁法)技术要求(中英文版) Technical requirements for nondestructive testing (electromagnetic method based on remote field eddy current) on prestressed concrete cylinder pipe |
|||
GB/T 41049-2021 纤维金属层板弯曲性能试验方法(中英文版) Test method for flexural properties of fibre metal laminates |
|||
GB/T 41078-2021 建筑防水材料有害物质试验方法(中英文版) Test methods for harmful substances in building waterproofing materials |
|||
GB/T 41203-2021 光伏组件封装材料加速老化试验方法(中英文版) Method for accelerated aging test of PV module encapsulating material |
|||
GB/T 41123.1-2021 无损检测 工业射线计算机层析成像检测 第1部分:原理、设备和样品(中英文版) Non-destructive testing -- Radiation methods for industrial computed tomography -- Part 1: Principles, equipment and samples |
|||
GB/T 41079.1-2021 液态金属物理性能测定方法 第1部分:密度的测定(中英文版) Test methods for physical properties of liquid metals—Part 1:Determination of density |
|||
GB/T 41061-2021 纤维增强塑料蠕变性能试验方法(中英文版) Test methods for creep properties of fiber reinforced plastics |
|||
GB/T 38265.13-2021 软钎剂试验方法 第13部分:钎剂溅散性的测定(中英文版) Test methods for soft soldering fluxes—Part 13: Determination of flux spattering |
|||
GB/T 41104.3-2021 实心和药芯软钎料丝? 规范和试验方法? 第3部分:药芯软钎料丝功效的润湿平衡试验方法(中英文版) Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy |
|||
GB/T 1600-2021 农药水分测定方法(中英文版) Testing method of water for pesticides |
|||
GB/T 6113.104-2021 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements |
|||
GB/T 41123.3-2021 无损检测 工业射线计算机层析成像检测 第3部分:验证(中英文版) Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification |
|||
GB/T 41123.2-2021 无损检测 工业射线计算机层析成像检测 第2部分:操作和解释(中英文版) Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation |
|||
GB/T 1927.8-2021 无疵小试样木材物理力学性质试验方法 第8部分:湿胀性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling |
|||
GB/T 12604.12-2021 无损检测? 术语? 第12部分:工业射线计算机层析成像检测(中英文版) Non-destructive testing -- Terminology -- Part 12: Radiation methods for industrial computed tomography |
|||
GB/T 19136-2021 农药热储稳定性测定方法(中英文版) Testing method of the accelerated storage stability at elevated temperature for pesticides |
|||
GB/T 38265.14-2021 软钎剂试验方法 第14部分:钎剂残留物胶粘性的评价(中英文版) Test methods for soft soldering fluxes—Part 14: Assessment of tackiness of flux residues |
|||
GB/T 38265.11-2021 软钎剂试验方法 第11部分:钎剂残留物的可溶性(中英文版) Test methods for soft soldering fluxes—Part 11: Solubility of flux residues |
|||
GB/T 1927.18-2021 无疵小试样木材物理力学性质试验方法 第18部分:抗冲击压痕测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation |
|||
GB/T 1927.9-2021 无疵小试样木材物理力学性质试验方法 第9部分:抗弯强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength |
|||
GB/T 1927.10-2021 无疵小试样木材物理力学性质试验方法 第10部分:抗弯弹性模量测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending |
|||
GB/T 38265.15-2021 软钎剂试验方法 第15部分:铜腐蚀试验(中英文版) Test methods for soft soldering fluxes—Part 15: Copper corrosion test |
|||
GB/T 1927.17-2021 无疵小试样木材物理力学性质试验方法 第17部分:冲击韧性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength |
|||
GB/T 38265.5-2021 软钎剂试验方法 第5部分:铜镜试验(中英文版) Test methods for soft soldering fluxes -- Part 5: Copper mirror test |
|||
GB/T 1927.19-2021 无疵小试样木材物理力学性质试验方法 第19部分:硬度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness |
|||
GB/T 1927.20-2021 无疵小试样木材物理力学性质试验方法 第20部分:抗劈力测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength |
|||
GB/T 41109-2021 土方机械? 平地机燃油消耗量? 试验方法(中英文版) Earth-moving machinery -- Fuel consumption for grader -- Test methods |
|||
GB/T 41120-2021 无损检测 非铁磁性金属材料脉冲涡流检测(中英文版) Non-destructive testing -- Test method for non-ferromagnetic metallic component pulsed eddy current testing |
|||
GB/T 1927.12-2021 无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain |
|||
GB/T 19545.5-2021 单臂操作助行器具 要求和试验方法 第5部分:带座手杖(中英文版) Assistive products for walking,manipulated by one arm—Requirements and test methods—Part 5: Walking sticks and canes with seat |
|||
GB/T 40890-2021 教学用玻璃仪器一般质量要求和试验方法(中英文版) General quality requirements and test methods for the teaching vitreous equipment |
|||
GB/T 4214.10-2021 家用和类似用途电器噪声测试方法 确定和检验噪声明示值的程序(中英文版) Test method for noise of household and similar electrical appliances—Procedure for determining and verifying declared noise emission values |
|||
GB/T 40889.2-2021 助行器具支脚垫 要求和测试方法 第2部分:拐杖支脚垫耐久性(中英文版) Tips for assistive products for walking—Requirements and test methods—Part 2:Durability of tips for crutches |
|||
GB/T 40889.1-2021 助行器具支脚垫 要求和测试方法 第1部分:支脚垫摩擦力(中英文版) Tips for assistive products for walking -- Requirements and test methods -- Part 1: Friction of tips |
|||
GB/T 40923.2-2021 滑雪单板 固定器安装区 第2部分:含嵌件滑雪单板的要求和试验方法(中英文版) Snowboards—Binding mounting area—Part 2:Requirements and test methods for snowboards with inserts |
|||
GB/T 40925-2021 滑雪单板软靴束带固定器 要求和试验方法(中英文版) Snowboard strap bindings for soft boots—Requirements and test methods |
|||
GB/T 40923.1-2021 滑雪单板 固定器安装区 第1部分:无嵌件滑雪单板的要求和试验方法(中英文版) Snowboards—Binding mounting area—Part 1:Requirements and test methods for snowboards without inserts |
|||
GB/T 40934-2021 滚塑成型 粉末流动性的试验方法(中英文版) Rotational moulding. Test method for powder flowability |
|||
GB/T 40979-2021 智能家用电器个人信息保护要求和测评方法(中英文版) Personal information protection requirements and test methods for intelligent household appliances |
|||
GB/T 40929-2021 高山滑雪杖和旅行滑雪杖 要求和试验方法(中英文版) Ski-poles for alpine and touring skiing—Requirements and test methods |
|||
GB/T 11809-2021 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验(中英文版) Test method of weld of fuel rod for PWR—Metallographic examination and radiographic testing |
|||
GB/T 5334-2021 乘用车 车轮 弯曲和径向疲劳性能要求及试验方法(中英文版) Passenger car—Wheels—Performance requirements and test methods for cornering and radial fatigue |
|||
GB/T 40826-2021 分梳山羊绒手排长度试验方法 图板电子扫描仪法(中英文版) Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method |
|||
GB/T 40737-2021 再制造 激光熔覆层性能试验方法(中英文版) Remanufacturing—Test method for performance of laser cladding layer |
|||
GB/T 15972.32-2021 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods—Part 32: Measurement methods and test procedures for mechanical characteristics—Coating strippability |
|||
GB/T 5909-2021 商用车 车轮 弯曲和径向疲劳性能要求及试验方法(中英文版) Commercial vehicles—Wheels—Performance requirements and test methods for cornering and radial fatigue |
|||
GB/T 40628-2021 籽棉衣分率试验方法 锯齿型试轧法(中英文版) Test method for seed cotton lint percentage—Process of sawtooth pattern |
|||
GB/T 12535-2021 汽车起动性能试验方法(中英文版) Test method of starting performance for motor vehicle |
|||
GB/T 16850.3-2021 光放大器试验方法 第3部分:单波道光放大器噪声参数(中英文版) Optical amplifiers test methods—Part 3:Noise figure parameters for single-channel amplifiers |
|||
GB/T 40564-2021 电子封装用环氧塑封料测试方法(中英文版) Test method of epoxy molding compound for electronic packaging |
|||
GB/T 19789-2021 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法(中英文版) Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor |
|||
GB/T 40799-2021 机械加工过程 能效基础数据检测方法(中英文版) Machining process -- Test methods for essential energy efficiency data |
|||
GB/T 26548.8-2021 手持便携式动力工具? 振动试验方法? 第8部分:往复式锯、抛光机和锉刀以及摆式或回转式锯(中英文版) Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action |
|||
GB/T 26548.12-2021 手持便携式动力工具 振动试验方法 第12部分:模具砂轮机(中英文版) Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 12:Die grinders |
|||
GB/T 40627-2021 油菜茎基溃疡病菌活性检测方法(中英文版) Test method for seed cotton lint percentage—Process of sawtooth pattern |
|||
GB/T 5169.20-2021 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|||
GB/T 3903.9-2021 鞋类 内底试验方法 跟部持钉力(中英文版) Footwear—Test methods for insoles—Heel pin holding strength |
|||
GB/T 40725-2021 浸胶帘线与橡胶粘合剥离性能试验方法(中英文版) Test method of dipped cord and rubber adhesive peeling performance |
|||
GB/T 4857.23-2021 包装 运输包装件基本试验 第23部分:垂直随机振动试验方法(中英文版) Packaging—Basic tests for transport packages—Part 23:Vertical random vibration test method |
|||
GB/T 40813-2021 信息安全技术 工业控制系统安全防护技术要求和测试评价方法(中英文版) Information security technology—Security protection technical requirements and testing evaluation methods of industrial control systems |
|||
GB/T 39520-2020 弹簧残余应力的X射线衍射测试方法(中英文版) Test method for determination the residual stress of spring by X-ray diffraction |
|||
GB/T 39221-2020 反渗透海水淡化阻垢剂阻垢性能试验 周期浓缩循环法(中英文版) Determination for performance of scale inhibitors for reverse osmosis seawater desalination—Recurrent condensation cycle test method |
|||
GB/T 39211-2020 船舶钢焊缝超声相控阵检测方法(中英文版) Testing method of phased array technology for ship steel weld |
|||
GB/T 39152-2020 铜及铜合金弯曲应力松弛试验方法(中英文版) Test method of the bending stress relaxation for copper and copper alloy |
|||
GB/T 39145-2020 硅片表面金属元素含量的测定 电感耦合等离子体质谱法(中英文版) Test method for the content of surface metal elements on silicon wafers—Inductively coupled plasma mass spectrometry |
|||
GB/T 39135-2020 建筑光伏玻璃组件色差检测方法(中英文版) Test method of color difference for photovoltaic glass module used in building |
|||
GB/T 39144-2020 氮化镓材料中镁含量的测定 二次离子质谱法(中英文版) Test method for magnesium content in gallium nitride materials—Secondary ion mass spectrometry |
|||
GB/T 39077-2020 经济型奥氏体-铁素体双相不锈钢中有害相的检测方法(中英文版) Test methods for detecting detrimental phases in lean duplex austenitic-ferritic stainless steels |
|||
GB/T 39006-2020 工业机器人特殊气候环境可靠性要求和测试方法(中英文版) Requirements and test methods of special climate conditions reliability for industrial robots |
|||
GB/T 25117-2020 轨道交通 机车车辆 牵引系统组合试验方法(中英文版) Railway applications—Rolling stock—Combined test method for traction systems |
|||
GB/T 16937-2020 土方机械 司机视野 试验方法和性能准则(中英文版) Earth-moving machinery—Operator’s field of view—Test method and performance criteria |
|||
GB/T 38924.1-2020 民用轻小型无人机系统环境试验方法 第1部分: 总则(中英文版) Environmental test methods for civil small and light unmanned aircraft system—Part 1: General principles |
|||
GB/T 4214.4-2020 家用和类似用途电器噪声测试方法 洗衣机和离心式脱水机的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for washing machines and spin extractors |
|||
GB/T 38930-2020 民用轻小型无人机系统抗风性要求及试验方法(中英文版) Requirements and test methods of the capability of wind resistance for civil small and light unmanned aircraft system |
|||
GB/T 39082-2020 电阻点焊、凸焊及缝焊接头的维氏硬度试验方法(中英文版) Test method of vickers hardness testing for resistance spot,projection and seam welds |
|||
GB/T 38908-2020 家用反渗透及纳滤膜元件耐氯性测试方法(中英文版) Test methods of chlorine resistance performance of household reverse osmosis and nanofiltration membrane elements |
|||
GB/T 12967.1-2020 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分:耐磨性的测定(中英文版) Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance |
|||
GB/T 8763-2020 非蒸散型吸气材料及制品吸气性能测试方法(中英文版) Test methods for gas absorption characteristic of non-evaporation gettering materials and products |
|||
GB/T 38933-2020 汽车用冷轧钢板 磷酸盐转化膜试验方法(中英文版) Cold rolled steel sheet for automobile—Test method of phosphate conversion coatings |
|||
GB/T 38833-2020 信息通信用240V/336V直流供电系统技术要求和试验方法(中英文版) 240V/336V DC power system technical requirements and test methods for information and telecommunication |
|||
GB/T 38806-2020 金属材料 薄板和薄带 弯折性能试验方法(中英文版) Metallic materials—Sheet and strip—Test method for bending and folding properties |
|||
GB/T 38804-2020 金属材料高温蒸汽氧化试验方法(中英文版) Test method for oxidation of metallic materials exposed in high-temperature steam |
|||
GB/T 24522-2020 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法(中英文版) Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
|||
GB/T 38897-2020 无损检测 弹性模量和泊松比的超声测量方法(中英文版) Non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using ultrasoinc velocity |
|||
GB/T 38787-2020 塑料 材料生物分解试验用样品制备方法(中英文版) Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials |
|||
GB/T 4334-2020 金属和合金的腐蚀 奥氏体及铁素体-奥氏体(双相)不锈钢晶间腐蚀试验方法(中英文版) Corrosion of metals and alloys-Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels |
|||
GB/T 5095.2509-2020 电子设备用机电元件 基本试验规程及测量方法 第25-9部分:信号完整性试验 试验25i:外来串扰(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests-Test 25i: Alien crosstalk |
|||
GB/T 38644-2020 信息安全技术 可信计算 可信连接测试方法(中英文版) Information security technology—Trusted computing—Testing method of trusted connect |
|||
GB/T 8484-2020 建筑外门窗保温性能检测方法(中英文版) Test method for thermal insulating performance for building exterior doors and windows |
|||
GB/T 5095.2506-2020 电子设备用机电元件 基本试验规程及测量方法 第25-6部分:试验25f:眼图和抖动(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-6:Test 25f:Eye pattern and jitter |
|||
GB/T 38691-2020 石油炼制催化剂比表面积测试方法(中英文版) Testing method for specific surface area of petroleum refining catalysts |
|||
GB/T 38686-2020 超薄玻璃柔韧性试验方法 两点弯曲法(中英文版) Test method for flexibility of ultrathin glass—Two point bending method |
|||
GB/T 26548.4-2020 手持便携式动力工具 振动试验方法 第4部分:直柄式砂轮机(中英文版) Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 4:Straight grinders |
|||
GB/T 8243.14-2020 内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings |
|||
GB/T 16900.4-2020 图形符号表示规则 第4部分:对象相关性测试方法(中英文版) Rules for the presentation of graphical symbols—Part 4: Methods for testing symbol referent association |
|||
GB/T 16900.2-2020 图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols—Part 2: Methods for testing comprehensibility |
|||
GB/T 10066.12-2020 电热装置的试验方法 第12部分:红外电热装置(中英文版) Test methods for electroheating installations—Part 12:Infrared electroheating installations |
|||
GB/T 9966.1-2020 天然石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验(中英文版) Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength |
|||
GB/T 38535-2020 纤维增强树脂基复合材料工业计算机层析成像(CT)检测方法(中英文版) Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT) |
|||
GB/T 38446-2020 微机电系统(MEMS)技术 带状薄膜抗拉性能的试验方法(中英文版) Micro-electromechanical system technology—Test methods for tensile property measurement of strip thin films |
|||
GB/T 38537-2020 纤维增强树脂基复合材料超声检测方法 C扫描法(中英文版) Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method |
|||
GB/T 9966.3-2020 天然石材试验方法 第3部分:吸水率、体积密度、真密度、真气孔率试验(中英文版) Test methods for natural stone--Part 3: Determination of water absorption, bulk density, true density and true porosity |
|||
GB/T 9966.4-2020 天然石材试验方法 第4部分:耐磨性试验(中英文版) Test methods for natural stone--Part 4: Determination of abrasion resistance |
|||
GB/T 9966.5-2020 天然石材试验方法 第5部分:硬度试验(中英文版) Test methods for natural stone--Part 5: Determination of hardness |
|||
GB/T 9966.6-2020 天然石材试验方法 第6部分:耐酸性试验(中英文版) Test methods for natural stone--Part 6: Determination of acid resistance |
|||
GB/T 9966.7-2020 天然石材试验方法 第7部分:石材挂件组合单元挂装强度试验(中英文版) Test methods for natural stone--Part 7: Determination of strength for individual stone anchorages |
|||
GB/T 38534-2020 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法(中英文版) Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature |
|||
GB/T 9966.2-2020 天然石材试验方法 第2部分:干燥、水饱和、冻融循环后弯曲强度试验(中英文版) Test methods for natural stone--Part 2: Determination of dry, wet and after freezing flexural strength |
|||
GB/T 12703.5-2020 纺织品 静电性能试验方法 第5部分:旋转机械摩擦法(中英文版) Textiles—Test methods for electrostatic propensity—Part 5:Test method using rotary mechanical friction |
|||
GB/T 39525-2020 玻璃幕墙面板牢固度检测方法(中英文版) Test method for the fastening degree of glass curtain wall panel |
|||
GB/T 39526-2020 建筑幕墙空气声隔声性能分级及检测方法(中英文版) Classification and test method for airborne sound insulation performance of curtain wall |
|||
GB/T 39709-2020 动车组玻璃、车窗耐静压及车窗密封性能试验方法(中英文版) Test methods of multiple units glass, windiows static pressure and windiows sealing performance |
|||
GB/T 12703.8-2020 纺织品 静电性能试验方法 第8部分:水平机械摩擦法(中英文版) Textiles—Test methods for electrostatic propensity—Part 8:Test method using horizontal mechanical friction |
|||
GB/T 21838.4-2020 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法(中英文版) Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings |
|||
GB/T 33014.10-2020 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第10部分:扩展音频范围的传导抗扰法(中英文版) Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 10: Immunity to conducted disturbances in the extended audio frequency range |
|||
GB/T 39576-2020 具有融合功能的移动终端安全能力测试方法(中英文版) Test methods for security capability of mobile terminal with syncretic function |
|||
GB/T 39588-2020 静电屏蔽包装袋要求及检测方法(中英文版) Requirements and test methods for electrostatic shielding packaging bags |
|||
GB/T 39605-2020 服装湿阻测试方法 出汗暖体假人法(中英文版) Test method for measuring the evaporative resistance of clothing—Sweating manikin method |
|||
GB/T 39684-2020 外窗热工缺陷现场测试方法(中英文版) Testing method of thermal irregularities for external window opening |
|||
GB/T 39687-2020 精细陶瓷粉体干燥损失测试方法(中英文版) Testing method for drying loss of fine ceramic powders |
|||
GB/T 39724-2020 铯原子钟技术要求及测试方法(中英文版) Technical specifications and testing methods for cesium atomic clock |
|||
GB/T 33014.7-2020 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第7部分:射频功率直接注入法(中英文版) Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 7:Direct radio frequency power injection |
|||
GB/T 39528-2020 建筑幕墙面板抗地震脱落检测方法(中英文版) Test method for determining the seismic drift causing the panels fallout from curtain wall system |
|||
GB/T 24523-2020 金属材料 快速压入(布氏型)硬度试验方法(中英文版) Metallic materials—Test method for rapid indentation (Brinell type) hardness testing |
|||
GB/T 39395-2020 热塑性塑料检查井井座抗压失稳试验方法(中英文版) Test method for buckling resistance of the thermoplastics inspection chamber bases |
|||
GB/T 39394-2020 LED灯、LED灯具和LED模块的测试方法(中英文版) Test method for LED lamps, LED luminaires and LED modules |
|||
GB/T 39492-2020 白光LED用荧光粉量子效率测试方法(中英文版) Testing method of quantum efficiency for white LED phosphor |
|||
GB/T 39490-2020 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法(中英文版) Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method |
|||
GB/T 39163-2020 靶材与背板结合强度测试方法(中英文版) Test methods of the bonding strength for target-backing plate assemblies |
|||
GB/T 35465.6-2020 聚合物基复合材料疲劳性能测试方法 第6部分:胶粘剂拉伸剪切疲劳(中英文版) Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension |
|||
GB/T 31334.6-2020 浸胶帆布试验方法 第6部分:尺寸、克重等基本项目测量(中英文版) Test methods for dipped canvas—Part 6 : Determinations of size, grammage, etc |
|||
GB/T 25217.9-2020 冲击地压测定、监测与防治方法 第9部分:煤层注水防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 9: Prevention method of water infusion on coal seam |
|||
GB/T 5211.6-2020 颜料和体质颜料通用试验方法 第6部分:水悬浮液pH值的测定(中英文版) General methods of test for pigments and extenders—Part 6: Determination of pH value of an aqueous suspension |
|||
GB/T 1741-2020 漆膜耐霉菌性测定法(中英文版) Test method for determining the resistance of paints film to mold |
|||
GB/T 24986.1-2020 家用和类似用途电器可靠性试验及评价 第1部分:通用要求(中英文版) Testing evaluation methods for reliability on household and similar electrical appliances —Part 1:General requirements |
|||
GB/T 25217.14-2020 冲击地压测定、监测与防治方法 第14部分:顶板水压致裂防治方法(中英文版) Methods for test, monitoring and prevention of rock burst—Part 14: Prevention method of roof hydraulic fracturing |
|||
GB/T 12688.10-2020 工业用苯乙烯试验方法 第10部分:含氧化合物的测定 气相色谱法(中英文版) Test method of styrene for industrial use—Part 10: Determination of oxygenates—Gas chromatography |
|||
GB/T 5169.30-2020 电工电子产品着火危险试验 第30部分:热释放 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods |
|||
GB/T 39382-2020 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法(中英文版) Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints |
|||
GB/T 5169.5-2020 电工电子产品着火危险试验 第5部分:试验火焰 针焰试验方法 装置、确认试验方法和导则(中英文版) Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance |
|||
GB/T 5211.3-2020 颜料和体质颜料通用试验方法 第3部分:105℃挥发物的测定(中英文版) General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃ |
|||
GB/T 39383-2020 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法(中英文版) Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints |
|||
GB/T 3137-2020 钽粉电性能试验方法(中英文版) Testing method for electrical property of tantalum powder |
|||
GB/T 39379-2020 无压热塑性塑料管道系统 水密性试验方法(中英文版) Thermoplastics piping systems for non-pressure applications—Test method for watertightness |
|||
GB/T 39359-2020 积分球法测量悬浮式液固光催化制氢反应(中英文版) Integrating sphere method for the test of liquid/solid suspended photocatalytic hydrogen production reaction |
|||
GB/T 39323-2020 乘用车车道保持辅助(LKA)系统性能要求及试验方法(中英文版) Performance requirement and testing method for lane keeping assist (LKA) system of passenger cars |
找到:1007條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |