中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 23595.3-2009 白光LED灯用稀土黄色荧光粉试验方法 第3部分:色品坐标的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 3: Determination of chromaticity coordinates |
|||
GB/T 23595.5-2009 白光LED灯用稀土黄色荧光粉试验方法 第5部分:pH值的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 5: Determination of pH value |
|||
GB/T 23595.4-2009 白光LED灯用稀土黄色荧光粉试验方法 第4部分:热稳定性的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 4: Determination of thermostability |
|||
GB/T 23296.1-2009 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南(中英文版) Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th |
|||
GB/T 4074.7-2009 绕组线试验方法 第7部分:测定漆包绕组线温度指数的试验方法(中英文版) Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires |
|||
GB/T 3917.5-2009 纺织品 织物撕破性能 第5部分:翼形试样(单缝)撕破强力的测定(中英文版) Textiles - Tear properties of fabrics - Part 5: Determination of tear force of wing-shaped test specimens (Single tear method) |
|||
GB/T 3917.2-2009 纺织品 织物撕破性能 第2部分:裤形试样(单缝)撕破强力的测定(中英文版) Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) |
|||
GB/T 23369-2009 硬质合金磁饱和(MS)测定的标准试验方法(中英文版) Standard test method for determination of magnetic saturation (MS) of cemented carbides |
|||
GB/T 4074.8-2009 绕组线试验方法 第8部分:测定漆包绕组线温度指数的试验方法 快速法(中英文版) Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method |
|||
GB/T 23253-2009 液压传动 电控液压泵 性能试验方法(中英文版) Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics |
|||
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|||
GB/T 22689-2008 测定固体绝缘材料相对耐表面放电击穿能力的推荐试验方法(中英文版) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
|||
GB/T 14625.3-2008 篮球、足球、排球、手球试验方法 第3部分:动态耐冲击试验方法(中英文版) Test methods for basketball, football, volleyball and handball - Part 3: The determination of resistance to shock |
|||
GB/T 22638.6-2008 铝箔试验方法 第6部分:直流电阻的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 6: Determination of direct current resistance |
|||
GB/T 22638.10-2008 铝箔试验方法 第10部分:涂层表面密度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 10: Determination of mass per unit area (surface density) of coatings |
|||
GB/T 22638.1-2008 铝箔试验方法 第1部分:厚度的测定 重量法(中英文版) Test methods for aluminium and aluminium alloy foils - Part 1: Determination of thickness by gravimetric method |
|||
GB/T 22638.2-2008 铝箔试验方法 第2部分:针孔的检测(中英文版) Test methods for aluminium and aluminium alloy foils - Part 2: Determination of porosity |
|||
GB/T 22638.3-2008 铝箔试验方法 第3部分:粘附性的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 3: Determination of stickiness |
|||
GB/T 22638.5-2008 铝箔试验方法 第5部分:刷水试验方法(中英文版) Test methods for aluminium and aluminium alloy foils - Part 5: Determination of wettability by brushing |
|||
GB/T 22638.7-2008 铝箔试验方法 第7部分:热封强度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength |
|||
GB/T 22638.9-2008 铝箔试验方法 第9部分:亲水性的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 9: Determination of hydrophilic property |
|||
GB/T 22638.4-2008 铝箔试验方法 第4部分:表面润湿张力的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 4: Determination of surface wetting tension |
|||
GB/T 15825.8-2008 金属薄板成形性能与试验方法 第8部分:成形极限图(FLD)测定指南(中英文版) Sheet metal formability and test methods - Part 8: Guidelines for the determination of forming-limit diagrams |
|||
GB/T 7702.3-2008 煤质颗粒活性炭试验方法 强度的测定(中英文版) Test method for granular activated carbon from coal - Determination of hardness |
|||
GB/T 7702.20-2008 煤质颗粒活性炭试验方法 孔容积 比表面积的测定(中英文版) Test method for granular activated carbon from coal - Determination of pore volume and specific surface area |
|||
GB/T 7702.19-2008 煤质颗粒活性炭试验方法 四氯化碳脱附率的测定(中英文版) Test method for granular activated carbon from coal - Determination of carbon tetrachloride(CCl4)desorption |
|||
GB/T 7702.18-2008 煤质颗粒活性炭试验方法 焦糖脱色率的测定(中英文版) Test method for granular activated carbon from coal - Determination of caramel adsorption |
|||
GB/T 7702.15-2008 煤质颗粒活性炭试验方法 灰分的测定(中英文版) Test method for granular activated carbon from coal - Determination of ash content |
|||
GB/T 7702.14-2008 煤质颗粒活性炭试验方法 硫容量的测定(中英文版) Test method for granular activated carbon from coal - Determination of sulphur capacity |
|||
GB/T 22567-2008 电气绝缘材料 测定玻璃化转变温度的试验方法(中英文版) Electrical insulating materials - Methods of test for the determination of the glass transition temperature |
|||
GB/T 10066.6-2008 电热装置的试验方法 第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output |
|||
GB/T 10066.9-2008 电热装置的试验方法 第9部分:高频介质加热装置输出功率的测定(中英文版) Test methods for electroheat installtions - Part 9: The determination of power output for High-frequency dielectric heating installation |
|||
GB/T 4925-2008 渔网 合成纤维网片强力与断裂伸长率试验方法(中英文版) Fishing nets - Method of test for the determination of strength and breaking elongation of netting of synthetic fiber |
|||
GB/T 14271-2008 毛绒净毛率试验方法 油压法(中英文版) Test method for the determination of scoured yield raw wool - Oil pressure method |
|||
GB/T 11547-2008 塑料 耐液体化学试剂性能的测定(中英文版) Plastic - Methods of test for the determination of the effects of immersion in liquid chemicals |
|||
GB/T 18856.7-2008 水煤浆试验方法 第7部分: pH值测定(中英文版) Test methods for coal water mixture - Part 7: Determination for pH value |
|||
GB/T 18856.6-2008 水煤浆试验方法 第6部分:密度测定(中英文版) Test methods for coal water mixture - Part 6: Determination of the density |
|||
GB/T 18856.5-2008 水煤浆试验方法 第5部分:稳定性测定(中英文版) Test methods for coal water mixture - Part 5: Determination of the stability |
|||
GB/T 18856.4-2008 水煤浆试验方法 第4部分:表观粘度测定(中英文版) Test methods for coal water mixture - Part 4: Determination of apparent viscosity |
|||
GB/T 18856.2-2008 水煤浆试验方法 第2部分: 浓度测定(中英文版) Test methods for coal water mixture - Part 2: Determination of mass percentage of solid |
|||
GB/T 749-2008 水泥抗硫酸盐侵蚀试验方法(中英文版) Test method for determining capability of resisting sulfate corrode of cement |
|||
GB/T 9343-2008 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定(中英文版) Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature |
|||
GB/T 2951.13-2008 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test |
|||
GB/T 2951.11-2008 电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
|||
GB/T 11213.7-2008 化纤用氢氧化钠试验方法 第7部分:铜含量的测定 分光光度法(中英文版) Test methods of sodium hydroxide for chemical fiber use -Part 7:Determination of copper content-spectrometric method |
|||
GB/T 12967.6-2008 铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method |
|||
GB/T 1839-2008 钢产品镀锌层质量试验方法(中英文版) Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products |
|||
GB/T 6803-2008 铁素体钢的无塑性转变温度落锤试验方法(中英文版) Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels |
|||
GB/T 21865-2008 用半自动和自动图象分析法测量平均粒度的标准测试方法(中英文版) Standard test methods for determining average grain size using semiautomatic and automatic image analysis |
|||
GB/T 7702.10-2008 煤质颗粒活性炭试验方法 苯蒸气 氯乙烷蒸气防护时间的测定(中英文版) Test method for granular activated carbon from coal - Determination of service life against benzene and chloroethane vapors |
|||
GB/T 21615-2008 危险品 易燃液体闭杯闪点试验方法(中英文版) Dangerous goods - Test method for determination of closed cup flash point of flammable liquids |
|||
GB/T 21613-2008 危险品 自加速分解温度试验方法(中英文版) Dangerous goods - Test method for determination of the accelerating decomposition temperature |
|||
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
|||
GB/T 17473.7-2008 微电子技术用贵金属浆料测试方法 可焊性、耐焊性测定(中英文版) Test methods of precious metals pastes used for microelectronics - Determination of solderability and solderelaching resistance |
|||
GB/T 15072.19-2008 贵金属合金化学分析方法 银合金中钒和镁量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of vanadium and magnesium contents for silver alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.10-2008 贵金属合金化学分析方法 金合金中镍量的测定 EDTA络合返滴定法(中英文版) Test method of precious metal alloys - Determination of nickel content for gold alloys - Complexometric backing titration using EDTA |
|||
GB/T 15072.11-2008 贵金属合金化学分析方法 金合金中钆和铍量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of gadolinium and beryllium contents for gold alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.1-2008 贵金属合金化学分析方法 金、铂、钯合金中金量的测定 硫酸亚铁电位滴定法(中英文版) Test method of precious alloys - Determination of gold content for gold, platinum and palladium alloys - Potentiometric titration using ferrous sulfate |
|||
GB/T 15072.12-2008 贵金属合金化学分析方法 银合金中钒量的测定 过氧化氢分光光度法(中英文版) Test method of precious metal alloys - Determination of nickel contents for silver alloys - Hydrogen peroxide spectrophotometry |
|||
GB/T 15072.13-2008 贵金属合金化学分析方法 银合金中锡、铈和镧量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of tin , cerium and lanthanium contents for silver alloys - Inductively coupled clasma atomic emission spectrometry |
|||
GB/T 15072.14-2008 贵金属合金化学分析方法 银合金中铝和镍量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of aluminium and nickel contents for silver alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.15-2008 贵金属合金化学分析方法 金、银、钯合金中镍、锌和锰量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of nickel, zinc and manganese contents for gold, silver and palladium alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.16-2008 贵金属合金化学分析方法 金合金中铜和锰量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of copper and manganese contents for gold alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.17-2008 贵金属合金化学分析方法 铂合金中钨量的测定 三氧化钨重量法(中英文版) Test method of precious metal alloys - Determination of tungsten contents for platinum alloys - Tungstic acid gravimetry |
|||
GB/T 15072.18-2008 贵金属合金化学分析方法 金合金中锆和镓量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test method of precious metal alloys - Determination of zirconium and gadolinium contents for gold alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.3-2008 贵金属合金化学分析方法 金、铂、钯合金中铂量的测定 高锰酸钾电流滴定法(中英文版) Test method of precious metal alloys - Determination of platinum content for gold, platinum and palladium alloys - Electricity titration using potassium permanganate |
|||
GB/T 15072.4-2008 贵金属合金化学分析方法 钯、银合金中钯量的测定 二甲基乙二醛肟重量法(中英文版) Test method of precious metal alloys - Determination of palladium content for palladium and silver alloys - Butanedione dioxime gravimetry |
|||
GB/T 15072.5-2008 贵金属合金化学分析方法 金、钯合金中银量的测定 碘化钾电位滴定法(中英文版) Test method of precious metal alloys - Determination of silver content for gold and palladium alloys - Potentionmeter titration with potassium iodide |
|||
GB/T 15072.6-2008 贵金属合金化学分析方法 铂、钯合金中铱量的测定 硫酸亚铁电流滴定法(中英文版) Test method of precious metal alloys - Determination of iridium contents for platinum, palladium alloys - Electricity titration with ferrous sulfate |
|||
GB/T 15072.7-2008 贵金属合金化学分析方法 金合金中铬和铁量的测定 电感耦合等离子体原子发射光谱法(中英文版) Test methods of precious metal alloys - Determination of chromium and iron contents for gold alloys - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 15072.8-2008 贵金属合金化学分析方法 金、钯、银合金中铜量的测定 硫脲析出EDTA络合返滴定法(中英文版) Test method of precious metal alloys - Determination of copper content for gold, palladium and silver alloys - Complexometric return titration using thiourea releasing EDTA |
|||
GB/T 15072.9-2008 贵金属合金化学分析方法 金合金中铟量的测定 EDTA络合返滴定法(中英文版) Test method of precious metal alloys - Determination of indium content for gold alloys - Complexometric return titration using EDTA |
|||
GB/T 17473.1-2008 微电子技术用贵金属浆料测试方法 固体含量测定(中英文版) Test methods of precious metals pastes used for microelectronics-Determination of solids content |
|||
GB/T 17473.2-2008 微电子技术用贵金属浆料测试方法 细度测定(中英文版) Test methods of presious metals pastes used for microelectronics - Determination of fineness |
|||
GB/T 17473.3-2008 微电子技术用贵金属浆料测试方法 方阻测定(中英文版) Test methods of precious metals pastes used for microelectronics Determination of sheet resistance |
|||
GB/T 17473.4-2008 微电子技术用贵金属浆料测试方法 附着力测定(中英文版) Test methods of precious metals pastes used for microelectronics - Determination of adhesion |
|||
GB/T 17473.5-2008 微电子技术用贵金属浆料测试方法 粘度测定(中英文版) Test methods of pastes used for microelectronics - Determination of viscosity |
|||
GB/T 17473.6-2008 微电子技术用贵金属浆料测试方法 分辨率测定(中英文版) Test methods of precious metal pastes used for microelectronics - Determination of resolution |
|||
GB/T 15072.2-2008 贵金属合金化学分析方法 银合金中银量的测定 氯化钠电位滴定法(中英文版) Test method of precious metal alloys - Determination of silver contents for silver alloys - Potentionmeter titration with sodium chloride |
|||
GB/T 5018-2008 润滑脂防腐蚀性试验法(中英文版) Standard test method for determining corrosion preventive properties of lubricating greases |
|||
GB/T 21405-2008 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求(中英文版) Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
|||
GB/T 7702.8-2008 煤质颗粒活性炭试验方法 苯酚吸附值的测定(中英文版) Test method for granular activated carbon from coal - Determination of phenol adsorption |
|||
GB/T 7702.7-2008 煤质颗粒活性炭试验方法 碘吸附值的测定(中英文版) Test method for granular activated carbon from coal - Determination of iodine number |
|||
GB/T 7702.6-2008 煤质颗粒活性炭试验方法 亚甲蓝吸附值的测定(中英文版) Test method for granular activated carbon from coal - Determination of methylene blue adsorption |
|||
GB/T 7702.9-2008 煤质颗粒活性炭试验方法 着火点的测定(中英文版) Test method for granular activated carbon from coal - Determination of ignition temperature |
|||
GB/T 21353-2008 漆膜抗藻性测定法(中英文版) Test method for determining the resistance of paint film to algae |
|||
GB/T 10066.31-2007 电热装置的试验方法 第31部分:高频感应加热装置发生器输出功率的测定(中英文版) Test methods for electroheat installtions - Part 31: High-frequency induction heating installation- Test methods for the determination of power output of the generator |
|||
GB/T 1741-2007 漆膜耐霉菌性测定法(中英文版) Test method for determining the resistance of paints film to mold |
|||
GB/T 6978-2007 含脂毛洗净率试验方法 烘箱法(中英文版) Test method for the determination of scoured yield of greasy wool - Drying oven method |
|||
GB 20936.1-2007 可燃性气体探测用电气设备 第1部分:通用要求和试验方法(中英文版) Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirement and test methods |
|||
GB/T 2522-2007 电工钢片(带)表面绝缘电阻、涂层附着性测试方法(中英文版) Methods of test for determination of surface insulation resistance and lamination factor of electric sheet and strip |
|||
GB/T 20761-2006 牛尿中α-群勃龙、β-群勃龙、19-乙烯去甲睾酮和epi-19-乙烯去甲睾酮残留量的测定 液相色谱-串联质谱法(中英文版) Method for the determination of α-trenbolone,β-trenbolone, nortestosterone and epi-nortestosterone residues in bovine urine - LC-MS-MS method |
|||
GB/T 20758-2006 牛肝和牛肉中睾酮、表睾酮、孕酮残留量的测定 液相色谱-串联质谱法(中英文版) Method for the determination of testosterone, epi-testosterone and progesterone residues in bovine liver and muscle tissues - LC-MS-MS method |
|||
GB/T 20654-2006 防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法(中英文版) Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials |
|||
GB/T 20671.11-2006 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法(中英文版) Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi |
|||
GB/T 13490-2006 V带 带的均匀性 测量中心距变化量的试验方法(中英文版) V-belts - Uniformity of belts - Test method for determination of centre distance variation |
|||
GB/T 20170.1-2006 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版) Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds |
|||
GB/T 20405.5-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution |
|||
GB/T 20405.4-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating |
|||
GB/T 20405.3-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation |
|||
GB/T 20405.2-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers |
|||
GB/T 20405.1-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH |
|||
GB/T 10064-2006 测定固体绝缘材料绝缘电阻的试验方法(中英文版) Methods of test for the determination of the insulation resistance of solid insulating materials |
|||
GB/T 3810.6-2006 陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定(中英文版) Test methods of ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles |
|||
GB/T 3810.11-2006 陶瓷砖试验方法 第11部分:有釉砖抗釉裂性的测定(中英文版) Test methods of ceramic tiles Part 11: Determination of crazing resistance for glazed tiles |
|||
GB/T 3810.7-2006 陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定(中英文版) Test methods of ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles |
|||
GB/T 20102-2006 玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法(中英文版) Test method for determining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution |
|||
GB/T 4510-2006 石油沥青脆点测定法#弗拉斯法(中英文版) Test method for determination of breaking point of bitumen (Fraass method) |
|||
GB/T?20170.1-2006 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版) Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds |
|||
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|||
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|||
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|||
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
|||
GB/T 18570.8-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture |
|||
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
|||
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
|||
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|||
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|||
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|||
GB/T 6324.2-2004 有机化工产品试验方法 第2部分:挥发性有机液体水浴上蒸发后干残渣的测定(中英文版) Test method of organic chemical products--Part 2:Determination of dry residue after evaporation on a water bath for volatile organic liquids |
|||
GB/T 6609.23-2004 氧化铝化学分析方法和物理性能测定方法 试样的制备和贮存(中英文版) Chemical analysis methods and determination of physical performance of alumina--Preparation andstorage of test samples |
|||
GB/T 7164-2004 用于核反应堆的辐射探测器 特性及其测试方法(中英文版) Radiation detectors for nuclear reactors--Characteristics and test methods |
|||
GB/T 755.2-2003 旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版) Methods for determininglosses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles) |
|||
GB/T 19230.2-2003 评价汽油清净剂使用效果的试验方法 第2部分: 汽油清净剂破乳性能试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 2: Test method for demulsibility of gasoline detergent |
|||
GB/T 19230.1-2003 评价汽油清净剂使用效果的试验方法 第1部分:汽油清净剂防锈性能试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 1: Test method for rust-preventing characteristics of gasoline detergent |
|||
GB/T 19230.3-2003 评价汽油清净剂使用效果的试验方法 第3部分: 汽油清净剂对电子孔式燃油喷嘴(PFI)堵塞倾向影响的试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling |
|||
GB/T 19230.4-2003 评价汽油清净剂使用效果的试验方法 第4部分: 汽油清净剂对汽油机进气系统沉积物(ISD)生成倾向影响的试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 4: Test method for influence of induction system deposit(ISD)tendencies of gasoline detergent |
|||
GB/T 19230.5-2003 评价汽油清净剂使用效果的试验方法 第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(Ford 2.3L方法)(中英文版) Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method) |
|||
GB/T 19230.6-2003 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法)(中英文版) Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) |
|||
GB/T 13477.10-2002 建筑密封材料试验方法 第10部分:定伸粘结性的测定(中英文版) Test method for building sealants--Part 10:Determination of tensile properties at maintained extension |
|||
GB/T 13477.13-2002 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定(中英文版) Test method for building sealants--Part 13:Determination of adhesion/cohesion properties at variable temperatures |
|||
GB/T 13477.19-2002 建筑密封材料试验方法 第19部分:质量与体积变化的测定(中英文版) Test method for building sealants--Part 19:Determination of change in mass and volume |
|||
GB/T 13477.12-2002 建筑密封材料试验方法 第12部分:同一温度下拉伸-压缩循环后粘结性的测定(中英文版) Test method for building sealants--Part 12:Determination of adhesion/cohesion properties at constant temperature |
|||
GB/T 13477.14-2002 建筑密封材料试验方法 第14部分:浸水及拉伸-压缩循环后粘结性的测定(中英文版) Testmethod for building sealants--Part 14:Determination of resistance to prolonged exposure to water |
|||
GB/T 13477.15-2002 建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定(中英文版) Test method for building sealants--Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water |
|||
GB/T 13477.16-2002 建筑密封材料试验方法 第16部分:压缩特性的测定(中英文版) Test method for buildingsealants--Part 16:Determination of resistance to compression |
|||
GB/T 13477.17-2002 建筑密封材料试验方法 第17部分:弹性恢复率的测定(中英文版) Test method for building sealants--Part 17:Determination of elastic recovery |
|||
GB/T 13477.18-2002 建筑密封材料试验方法 第18部分:剥离粘结性的测定(中英文版) Test method for building sealants--Part 18:Determination of adhesion-in-peel |
|||
GB/T 13477.8-2002 建筑密封材料试验方法 第8部分:拉伸粘结性的测定(中英文版) Test method for building sealants--Part 8:Determination of tensile properties |
|||
GB/T 13477.20-2002 建筑密封材料试验方法 第20部分:污染性的测定(中英文版) Test method for building sealants--Part 20:Determination of staining |
|||
GB/T 13477.9-2002 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定(中英文版) Test method for building sealants--Part 9:Determination of adhesion/cohesion properties after immersion in water |
|||
GB/T 13477.7-2002 建筑密封材料试验方法 第7部分:低温柔性的测定(中英文版) Test method for building sealants--Part 7:Determination of low-temperature flexibility |
|||
GB/T 13477.6-2002 建筑密封材料试验方法 第6部分:流动性的测定(中英文版) Test method for building sealants--Part 6:Determination of flow |
|||
GB/T 13477.5-2002 建筑密封材料试验方法 第5部分:表干时间的测定(中英文版) Test method for building sealants--Part 5:Determination for tack-free time |
|||
GB/T 13477.4-2002 建筑密封材料试验方法 第4部分:原包装单组分密封材料挤出性的测定(中英文版) Test method for building sealants--Part 4:Determination of extrudability of one-component sealants |
|||
GB/T 13477.3-2002 建筑密封材料试验方法 第3部分:使用标准器具测定密封材料挤出性的方法(中英文版) Test method for building sealants--Part 3:Determination of extrudability of sealants using standardized apparatus |
|||
GB/T 13477.2-2002 建筑密封材料试验方法 第2部分:密度的测定(中英文版) Test method for building sealants--Part 2:Determination of density |
|||
GB/T 13477.11-2002 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定(中英文版) Test method for building sealants--Part 11:Determination of adhesion/cohesion properties at maintained extension after immersion in water |
|||
GB/T 14634.4-2002 灯用稀土三基色荧光粉试验方法 电传感法粒度分布测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of particle size distribution by electric sensing zone technique |
|||
GB/T 6881.3-2002 声学 声压法测定噪声源声功率级 混响场中小型可移动声源工程法 第2部分:专用混响测试室法(中英文版) Acoustics--Determination of sound power levels of noise sources-using sound pressure--Engineering methods for small,movable sources in reverberant fields--Part 2:Methods for special reverberation test rooms |
找到:473條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 |