中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 15595-2008
聚氯乙烯树脂 热稳定性试验方法 白度法(中英文版)
Polyvinyl chloride resins - Test methods for the thermal stability - Whiteness method
 
GB/T 15972.33-2008
光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版)
Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility
 
GB/T 15972.32-2008
光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版)
Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability
 
GB/T 17473.7-2008
微电子技术用贵金属浆料测试方法 可焊性、耐焊性测定(中英文版)
Test methods of precious metals pastes used for microelectronics - Determination of solderability and solderelaching resistance
 
GB/T 2423.32-2008
电工电子产品环境试验 第2部分:试验方法 试验Ta: 润湿称量法可焊性(中英文版)
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ta: Solderability test by the wetting balance method
 
GB/T 21398-2008
农林机械 电磁兼容性 试验方法和验收规则(中英文版)
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
 
GB/T 328.15-2007
建筑防水卷材试验方法 第15部分:高分子防水卷材 低温弯折性(中英文版)
Test methods for building sheets for waterproofing - Part 15: Plastic and rubber sheets for waterproof-foldability at low temperature
 
GB/T 328.14-2007
建筑防水卷材试验方法 第14部分:沥青防水卷材 低温柔性(中英文版)
Test methods for building sheets for waterproofing - Part 14: Bitumen sheets for waterproofing-flexibility at low temperature
 
GB/T 328.13-2007
建筑防水卷材试验方法 第13部分:高分子防水卷材 尺寸稳定性(中英文版)
Test methods for building sheets for waterproofing - Part 13: Plastic and rubber sheets for waterproofing-dimensional stability
 
GB/T 328.12-2007
建筑防水卷材试验方法 第12部分:沥青防水卷材 尺寸稳定性(中英文版)
Test methods for building sheets for waterproofing - Part 12: Bitumen sheets for waterproofing-dimensional stability
 
GB/T 5169.11-2006
电工电子产品着火危险试验 第11部分:灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法(中英文版)
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
 
GB/T 20671.9-2006
非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials
 
GB/T 20671.8-2006
非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials
 
GB/T 20671.4-2006
非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials
 
GB/T 20671.2-2006
非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials
 
GB/T 20390.2-2006
纺织品 床上用品燃烧性能 第2部分:小火焰为点火源的可点燃性试验方法(中英文版)
Textiles―Burning behaviour of bedding items―Part 2: Test methods for the ignitability by a small open flame
 
GB/T 20390.1-2006
纺织品 床上用品燃烧性能 第1部分:香烟为点火源的可点燃性试验方法(中英文版)
Textiles―Burning behaviour of bedding items―Part 1: Test methods for the ignitability by a smouldering cigarette
 
GB/T 8243.5-2006
内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
 
GB/T 19973.2-2005
医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版)
Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process
 
GB/T 3903.13-2005
鞋类-外底试验方法-尺寸稳定性(中英文版)
Footwear-Test methods for outsoles-Dimensional stability
 
GB/T 3903.10-2005
鞋类-内底试验方法-尺寸稳定性(中英文版)
Footwear-Test methods for insoles-Dimensional stability
 
GB/T 6982-2003
软包装容器透湿度试验方法(中英文版)
Test methods for water vapor permeability of flexible containers
 
GB/T 19055-2003
汽车发动机可靠性试验方法(中英文版)
Reliability test methods for motor vehicle engines
 
GB/T 18214.1-2000
全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果(中英文版)
Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards,methods of testing and required test results
 
GB/T 12165-1998
盒式磁带录音机可靠性要求和试验方法(中英文版)
Reliability requirements and testing methods for cassette tape recorders
 
GB/T 12840-1996
盒式磁带录音机运带机构可靠性要求和试验方法(中英文版)
Reliability requirements and testing methods for tape transport mechanism of cassette tape recorders
 
GB/T 15844.3-1995
移动通信调频无线电话机可靠性要求及试验方法(中英文版)
Reliability requirements and test methods for radio transceiver employing F3E emission used in the mobile services
 
GB/T 15524-1995
非广播磁带录像机可靠性要求和试验方法(中英文版)
Reliability requirements and testing methods for non-broadcast video tape recorders
 
GB/T 13426-1992
数字通信设备的可靠性要求和试验方法(中英文版)
Reliability requirements and test methods for digital communication equipment
 
GB/T 12639-1990
通信卫星有效载荷性能的在轨测试方法(中英文版)
Methods of in-orbit testing for communication satellite payload performances
 
GB/T 12322-1990
通用型应用电视设备可靠性试验方法(中英文版)
Methods of reliability testing for universal CCTV systems
 
GB/T 12129-1989
时(间)-幅(度)变换器测试方法(中英文版)
Characteristics and test methods for time-to-amplitude converters
 
GB/T 11320-1989
压电陶瓷材料性能测试方法 低机械品质因数压电陶瓷材料性能的测试(中英文版)
Test methods for the properties of piezoelectric ceramics--Material with the low mechanical quality factor
 
GB/T 9430-1988
荧光数码显示管亮度稳定性试验方法(中英文版)
Methods of test of luminance stability for fluorescent display tubes
 
GB/T 6753.3-1986
涂料贮存稳定性试验方法(中英文版)
Methods of test for package stability of paints
 

找到:235條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3