中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
 |
GB/T 26468-2011 承压设备带压密封夹具设计规范（中英文版） Generic specification for online leaksealing clamps of pressure equipment |
 |
|
|
|
GB/T 26467-2011 承压设备带压密封技术规范（中英文版） Generic specification for online leak sealing technology of pressure equipments |
|
|
|
|
GB 26148-2010 高压水射流清洗作业安全规范（中英文版） Safety specification for the use of manually operated high pressure waterjet equipment |
|
|
|
|
GB/T 25920-2010 饮用冷水水表塑料表壳及承压件技术规范（中英文版） Plastic body and pressured parts of the meter for cold potable water - Technical specifications |
|
|
|
|
GB/T 25283-2010 矿产资源综合勘查评价规范+(第1号修改单)（中英文版） Specification for comprehensive exploration and evaluation of mineral resources+(No.1 modification sheet) |
|
|
|
|
GB/T 25270-2010 橡胶塑料的拉伸、屈挠和压缩试验设备（恒速移动型） 技术要求（中英文版） Rubber and plastics test equipment - Tensile,flexural and compression types(constant rate of traverse) - Specification |
|
|
|
|
GB/T 25172-2010 猪常温精液生产与保存技术规范（中英文版） Technical specification for production and preservation of fresh boar semen |
|
|
|
|
GB/T 22124.3-2010 面向装备制造业 产品全生命周期工艺知识 第3部分：通用制造工艺描述与表达规范（中英文版） Equipment manufacturing oriented product life-cycle technology knowledge - Part3 : Description and representation specification of general manufacturing technology |
|
|
|
|
GB/T 24649.3-2009 拖拉机挂车气制动系统空气压缩机 技术条件（中英文版） Air compressor of pneumatic braking system of tractor-trailers - Specifications |
|
|
|
|
GB/T 24505-2009 矿井井下高压含水层探水钻探技术规范（中英文版） Technical specification of drilling for high pressure aquifer water detection in underground mine |
|
|
|
|
GB/T 11038-2009 船用辅锅炉及压力容器受压元件焊接技术条件（中英文版） Welding specification for pressure parts of marine auxiliary boiler and pressure vessel |
|
|
|
|
GB 5092-2008 压力机用感应式安全装置技术条件（中英文版） Specification of induction protective devices for presses |
|
|
|
|
GB/T 16453.6-2008 水土保持综合治理 技术规范 崩岗治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of collapse hill |
|
|
|
|
GB/T 16453.5-2008 水土保持综合治理 技术规范 风沙治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of wind erosion |
|
|
|
|
GB/T 16453.4-2008 水土保持综合治理 技术规范 小型蓄排引水工程（中英文版） Technical specification for comprehensive control of soil and water conservation - Small engineering of store, drainage and draw water |
|
|
|
|
GB/T 16453.3-2008 水土保持综合治理 技术规范 沟壑治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of gullies |
|
|
|
|
GB/T 16453.2-2008 水土保持综合治理 技术规范 荒地治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of waste land |
|
|
|
|
GB/T 16453.1-2008 水土保持综合治理 技术规范 坡耕地治理技术（中英文版） Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of slope land |
|
|
|
|
GB 22280-2008 防腐木材生产规范（中英文版） Specification for production of preservative-treated wood |
|
|
|
|
GB/T 17200-2008 橡胶塑料拉力、压力和弯曲试验机（恒速驱动） 技术规范（中英文版） Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) |
|
|
|
|
GB/T 16623-2008 压配式实心轮胎技术规范（中英文版） Technical specification of press-on solid tyres |
|
|
|
|
GB/T 11880-2008 模锻锤和大型机械锻压机用模块技术条件（中英文版） Specification of large die-blocks used for die-forging hammer and mechanical forging press |
|
|
|
|
GB/T 18838.4-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸（中英文版） Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot |
|
|
|
|
GB/T 18838.3-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂（中英文版） Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit |
|
|
|
|
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义（中英文版） Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|
|
|
|
GB/T 17472-2008 微电子技术用贵金属浆料规范（中英文版） Specification for pastes of precious metal used for microelectronics |
|
|
|
|
GB 4584-2007 压力机用光电保护装置技术条件（中英文版） Specification of active opto-electronic protective devices for presses |
|
|
|
|
GB/T 20915.2-2007 冲模 弹性体压缩弹簧 第2部分：附件规格（中英文版） Stamping dies - Elastomer pressure springs - Part 2: Specification of accessories |
|
|
|
|
GB/T 20164-2006 传染病暴发流行期间疫区邮件及处理系统预防控制规范（中英文版） Prevention and control specifications for mail and mail handling systems in the area of when epidemics breakout |
|
|
|
|
GB/T 19773-2005 变压吸附提纯氢系统技术要求（中英文版） Specification of hydrogen purification system on pressure swing adsorption |
|
|
|
|
GB/T 19526-2004 羊寄生虫病防治技术规范（中英文版） Technical specifications for prevention and cure of sheep parasitosis |
|
|
|
|
GB/T 19516-2004 高速公路有线紧急电话系统技术要求（中英文版） The specifications of wired-emergency telephone system of expressway |
|
|
|
|
GB/T 18838.1-2002 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类（中英文版） Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification |
|
|
|
|
GB/T 17850.1-2002 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类（中英文版） Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introductionand classification |
|
|
|
|
GB/T 18154-2000 监控式抑爆装置技术要求（中英文版） Technical specification of automatic dust explosion suppression devices |
|
|
|
|
GB/T 17850.3-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 铜精炼渣（中英文版） Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag |
|
|
|
|
GB/T 5856-1999 热压机通用技术条件（中英文版） General specification of the hot press |
|
|
|
|
GB/T 17562.1-1998 频率低于3 MHz的矩形连接器 第1部分 总规范 一般要求和编制有质量评定要求的连接器详细规范的导则（中英文版） Rectangular connectors for frequencies below 3 MHz--Part 1: Generic specification--General requirements and guide for the preparation of detail specifications for connectors with assessed quality |
|
|
|
|
GB/T 17274-1998 系列1无压干散货集装箱技术要求和试验方法（中英文版） Series 1 specification and testing for non-pressurized containers of dry bulk |
|
|
|
|
GB/T 16513-1996 抑制射频干扰固定电感器 第2部分 分规范 试验方法和一般要求的选择（中英文版） Fixed inductors for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements |
|
|
|
|
GB/T 15288-1994 抑制射频干扰整件滤波器 第二部分:分规范 试验方法的选择和一般要求（中英文版） Complete filter units for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements |
|
|
|
|
GB/T 15157-1994 印制板用频率低于3 MHz的连接器 第1 部分:总规范 一般要求和编制有质量评定的详细规范的导则（中英文版） Connectors for frequencies below 3MHz for use with printed boards--Part l:Generic specification--Gen-eral requirements and guide for the preparation of detail specifications， with assessedquality |
|
|
|
|
GB/T 14855-1993 盒式音带制品质量总技术规范（中英文版） General specification of quality for pre-recorded audio cassette |
|
|
|
|
GB/T 14313-1993 精密硬同轴线及其精密连接器总规范（中英文版） Rigid precision coaxial lines and their associated precision connectors， Generic specification of |
|
|
|
|
GB/T 11631-1989 潜水器和水下装置耐压结构制造技术条件（中英文版） Technical specifications of manufacture of pressure hull structure for submersibles and underwater equipments |
|
|
|
|
GB/T 11632-1989 潜水器和水下装置耐压结构材料技术条件（中英文版） Technical specifications of material of pressure hull structure for submersibles and underwater equipments |
|
| 找到:146條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |
