中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 11417.1-2012 眼科光学 接触镜 第1部分:词汇、分类和推荐的标识规范(中英文版) Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labeling specifications |
|||
GB/T 29407-2012 阻燃木材及阻燃人造板生产技术规范(中英文版) Technology specification for production of fire-retardant treated lumber and wood composite panel products |
|||
GB/T 14860.4-2012 电子和通信设备用变压器和电感器 第4部分:按能力批准程序评定质量的开关电源变压器分规范(中英文版) Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
|||
GB/T 29391-2012 岩溶地区草地石漠化遥感监测技术规程(中英文版) Specification of remote sensing for rock desertification monitoring of grassland in Karst area |
|||
GB/T 29399-2012 木材防虫(蚁)技术规范(中英文版) Technology specification for wood resistance to termites and beetles |
|||
GB/T 14860.3-2012 电子和通信设备用变压器和电感器 第3部分:按能力批准程序评定质量的电源变压器分规范(中英文版) Transformers and inductors for use in electronic and telecommunication equipment - Part 3:Sectional specification for power transformers on the basis of the capability approval procedure |
|||
GB/T 26831.2-2012 社区能源计量抄收系统规范 第2部分:物理层与链路层(中英文版) Society energy metering for reading system specification - Part 2: Physical and link layer |
|||
GB/T 28823-2012 信息技术 学习、教育和培训 平台与媒体分类代码XML绑定规范(中英文版) Information technology - Learning,education and training - Classification code of platform and media XML binding specification |
|||
GB/T 18220-2012 信息技术 手持式信息处理设备通用规范(中英文版) Information technology - General specification of hand-held device for information processing |
|||
GB/T 28708-2012 管道工程用无缝及焊接钢管尺寸选用规定(中英文版) Specification for size selection of seamless and welded steel pipe used in piping engineering |
|||
GB/T 28431-2012 地面数字电视传送流复用和接口技术规范(中英文版) Specification for transport stream multiplexing and interfaces in digital terrestrial television |
|||
GB/T 28484-2012 电鸣乐器压缩与扩展类音效装置通用技术条件(中英文版) General specification for compression and expansion equipment of electrophones |
|||
GB/T 28577-2012 冷链物流分类与基本要求(中英文版) Classification and basic specification for cold chain logistics |
|||
GB/T 28435-2012 地面数字电视广播发射机技术要求和测量方法(中英文版) Technical specifications and methods of measurement for digital terrestrial television broadcasting transmitters |
|||
GB 27995.1-2011 半成品眼镜片毛坯 第1部分:单光和多焦点眼镜片毛坯规范(中英文版) Semi-finished spectacle lens blanks - Part 1: Specifications for single-vision and multifocal lens blanks |
|||
GB/T 27681-2011 铜及铜合金熔铸冷却水零排放和循环利用规范(中英文版) Specification on zero emissions and recycling of cooling water during melting and casting for copper and copper alloy |
|||
GB/T 17850.6-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣(中英文版) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag |
|||
GB/T 15157.12-2011 频率低于3MHz的印制板连接器 第12部分:集成电路插座的尺寸、一般要求和试验方法详细规范(中英文版) Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
|||
GB/T 17850.11-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分:钢渣特种型砂(中英文版) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag |
|||
GB/T 27926.1-2011 金融服务 金融业通用报文方案 第1部分:库输入输出方法和格式规范(中英文版) Financial services - Universal financial industry message scheme - Part 1: Overall methodology and format specifications for inputs and outputs from the repository |
|||
GB/T 17626.15-2011 电磁兼容 试验和测量技术 闪烁仪 功能和设计规范(中英文版) Electromagnetic compatibility - Testing and measurement techniques - Flickermeter - Functional and design specifications |
|||
GB/T 27511-2011 35mm幻灯片 双画幅和单画幅规范(中英文版) 35mm filmstrips - Specifications for double-frame and single-frame formats |
|||
GB/Z 26958.1-2011 产品几何技术规范(GPS)滤波 第1部分:概述和基本概念(中英文版) Geometrical Product Specifications (GPS) - Filtration - Part 1: Overview and basic concepts |
|||
GB/T 26817-2011 企业信用调查报告格式规范 基本信息报告、普通调查报告、深度调查报告(中英文版) Specification of business credit information reports - Basic credit information report, standard report, indepth report |
|||
GB/T 26856-2011 中文办公软件基本要求及符合性测试规范(中英文版) Specification for the basic requirements and conformity test of Chinese office software |
|||
GB/T 26857.1-2011 信息技术 开放系统互连 测试方法和规范 (MTS) 测试和测试控制记法 第3版 第1部分:TTCN-3核心语言(中英文版) Methods for testing and specification (MTS)- The testing and test control notation version 3 - Part1:TTCN-3 core language |
|||
GB/T 13337.2-2011 固定型排气式铅酸蓄电池 第2部分:规格及尺寸(中英文版) Stationary lead-acid batteries - Vented types - Part 2: Capacity specifications and size |
|||
GB 26786-2011 工业热电偶和热电阻隔爆技术条件(中英文版) Specifications for the flame proof of industrial thermocouples and resistance thermometer sensors |
|||
GB/T 26765-2011 机动车安全技术检验业务信息系统及联网规范(中英文版) Specifications for power-driven vehicle safety inspection business information system and networking |
|||
GB/T 26772-2011 运输与仓储业务数据交换应用规范(中英文版) Data interchange specification between transportation and warehousing |
|||
GB/T 26675-2011 机床电气、电子和可编程电子控制系统 绝缘电阻试验规范(中英文版) Electrical,electronic and programmable electronic control systems of machine tools - Specification of insulation resistance test |
|||
GB 26529-2011 宗教活动场所和旅游场所燃香安全规范(中英文版) Safety specification on censing for religious activities and tourism venues |
|||
GB/T 26308-2010 银废料分类和技术条件(中英文版) Classification and specification for silver metal scraps |
|||
GB/Z 26157.2-2010 测量和控制数字数据通信 工业控制系统用现场总线 类型 2:ControlNet和EtherNet/IP规范 第2部分:物理层和介质(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 2: ControlNet and EtherNet/IP specification - Part 2: Physical Layer and Media |
|||
GB/T 26126-2010 中小型煤粉工业锅炉用煤技术条件(中英文版) Specifications of pulverized coal for small and medium-sized industrial boilers |
|||
GB/T 20719.43-2010 工业自动化系统与集成 过程规范语言 第43部分:定义性扩展:活动次序和持续时间扩展(中英文版) Industrial automation systems and integration - Process specification language - Part 43:Definitional extension:Activity ordering and duration extensions |
|||
GB/T 20719.41-2010 工业自动化系统与集成 过程规范语言 第41部分:定义性扩展:活动扩展(中英文版) Industrial automation system and integration - Process specification language - Part 41:Definitional extension:Activity extensions |
|||
GB/T 26106-2010 机械镀锌层 技术规范和试验方法(中英文版) Mechanically deposited coatings of zinc - Specification and test methods |
|||
GB/T 26020-2010 金废料分类和技术条件(中英文版) Classification and specification for gold metal scraps |
|||
GB/T 25895.2-2010 水域安全标志和沙滩安全旗 第2部分:沙滩安全旗颜色、形状、含义及性能的规范(中英文版) Water safety signs and beach safety flags - Part2: Specifications for beach safety flags - Colour, shape, meaning and performance |
|||
GB/T 25895.1-2010 水域安全标志和沙滩安全旗 第1部分:工作场所和公共区域用水域安全标志(中英文版) Water safety signs and beach safety flags - Part1: Specifications for water safety signs used in workplaces and public areas |
|||
GB/T 25847-2010 化学固化硅质耐腐蚀胶泥技术条件(中英文版) Standard specification for chemically setting silicate chemical - resistant mortars |
|||
GB/Z 25843-2010 ±800kV特高压直流输电控制与保护设备技术导则(中英文版) Specifications for control and protection equipment of ±800kV ultra high voltage direct current transmission |
|||
GB/T 25349-2010 使用乙醇汽油车辆检查、维护技术规范(中英文版) Technical specification for inspection and maintenance of vehicle using ethanol gasoline |
|||
GB/T 25283-2010 矿产资源综合勘查评价规范+(第1号修改单)(中英文版) Specification for comprehensive exploration and evaluation of mineral resources+(No.1 modification sheet) |
|||
GB/T 25438-2010 三相油浸式立体卷铁心配电变压器技术参数和要求(中英文版) Specification and technical requirements for three-phase oil-immersed tridimensional toroidal-core distribution transformers |
|||
GB/T 25270-2010 橡胶塑料的拉伸、屈挠和压缩试验设备(恒速移动型) 技术要求(中英文版) Rubber and plastics test equipment - Tensile,flexural and compression types(constant rate of traverse) - Specification |
|||
GB/T 25061-2010 信息安全技术 公钥基础设施 XML数字签名语法与处理规范(中英文版) Information security technology - Public key infrastructure - XML digital signature syntax and processing specification |
|||
GB/T 15629.15-2010 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第15部分:低速无线个域网(WPAN)媒体访问控制和物理层规范(中英文版) Information technology - Telecommunications and information exchange between systems local and metropolitan area networks - Specific requirements - Part 15.4: Wireless medium access control and physical layer(PHY))specification for low rate wireless p |
|||
GB/T 20719.44-2010 工业自动化系统与集成 过程规范语言 第44部分:定义性扩展 资源扩展(中英文版) Industrial automation system and integration - Process specification language - Part 44: Definitional extension - Resource extensions |
|||
GB/T 24774-2009 化学品分类和危险性象形图标识 通则(中英文版) Classification and hazard pictograms for chemicals - General specification |
|||
GB/T 24822-2009 家用和类似用途电器维修故障编码规范(中英文版) The specifications for household and similar electrical appliances |
|||
GB/T 24777-2009 化学品理化及其危险性检测实验室安全要求(中英文版) Safety specification for physico-chemical and dangerous properties testing laboratory of chemicals |
|||
GB/T 17126.2-2009 农业拖拉机和机械 动力输出万向节传动轴和动力输入连接装置 第2部分:动力输出万向节传动轴使用规范、各类联接装置用动力输出传动系和动力输入连接装置位置及间隙范围(中英文版) Agricultural tractors and machinery - Power take-off drive shafts and power-input connection - Part 2:Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments |
|||
GB/Z 24637.2-2009 产品几何技术规范(GPS) 通用概念 第2部分:基本原则、规范、操作集和不确定度(中英文版) Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets,specifications,operators and uncertainties |
|||
GB/Z 24636.1-2009 产品几何技术规范(GPS) 统计公差 第1部分:术语、定义和基本概念(中英文版) Geometrical product specifications(GPS) - Statistical tolerance - Part 1: Terms, definitions and basic concepts |
|||
GB/T 24661.3-2009 第三方电子商务服务平台服务及服务等级划分规范 第3部分:现代物流服务平台(中英文版) Specifications for service and service level classification of third-party e-commerce service platform - Part 3: Modern logistics service platform |
|||
GB/T 24661.2-2009 第三方电子商务服务平台服务及服务等级划分规范 第2部分:企业间(B2B)、企业与消费者间(B2C)电子商务服务平台(中英文版) Specifications for service and service level classification of third-party e-commerce service platform - Part 2: B2B and B2C service platform |
|||
GB/Z 24638-2009 产品几何技术规范(GPS) 线性和角度尺寸与公差标注+/-极限规范 台阶尺寸、距离、角度尺寸和半径(中英文版) Geometrical product specifications (GPS) - Linear and angular dimensioning and tolerancing: +/- limit specifications - Step dimensions, distances, angular sizes and radii |
|||
GB/T 22101.4-2009 棉花抗病虫性评价技术规范 第4部分:枯萎病(中英文版) Technical specification for evaluating resistance of cotton to diseases and insect pests - Part 4: Fusarium wilt |
|||
GB/T 22101.5-2009 棉花抗病虫性评价技术规范 第5部分:黄萎病(中英文版) Technical specification for evaluating resistance of cotton to diseases and insect pests - Part 5: Verticillium wilt |
|||
GB/T 22101.2-2009 棉花抗病虫性评价技术规范 第2部分:蚜虫(中英文版) Technical specification for evaluating resistance of cotton to disease and insect pests - Part 2: Cotton aphid |
|||
GB/T 22101.3-2009 棉花抗病虫性评价技术规范 第3部分:红铃虫(中英文版) Technical specification for evaluating resistance of cotton to disease and insect pests - Part 3: Pink bollworm |
|||
GB/T 24296-2009 烧结软磁材料技术条件(中英文版) Standard specifications for sintered soft magnetic materials |
|||
GB/T 15597.1-2009 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第1部分:命名系统和分类基础(中英文版) Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 23704-2009 信息技术 自动识别与数据采集技术 二维条码符号印制质量的检验(中英文版) Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols |
|||
GB/T 23654-2009 硫化橡胶和热塑性橡胶 建筑用预成型密封条的分类、要求和试验方法(中英文版) Rubber,vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification,specification and test methods |
|||
GB/T 23391.3-2009 玉米大、小斑病和玉米螟防治技术规范 第3部分:玉米螟(中英文版) Technical specification for control of northern corn leaf blight,southern corn leaf blight and asian corn borer - Part 3: Asian corn borer |
|||
GB/T 23391.2-2009 玉米大、小斑病和玉米螟防治技术规范 第2部分:玉米小斑病(中英文版) Technical specification for control of northern corn leaf blight,southern corn leaf blight and asian corn borer - Part 2: Southern leaf blight |
|||
GB/T 23392.1-2009 十字花科蔬菜病虫害测报技术规范 第1部分:霜霉病(中英文版) Technical specification for the forecast of diseases and insects on cruciferous plants - Part 1: Pernospora parasitica (Pers.) Fr. |
|||
GB/T 23391.1-2009 玉米大、小斑病和玉米螟防治技术规范 第1部分:玉米大斑病(中英文版) Technical specification for control of northern corn leaf blight,southern corn leaf blight and asian corn borer - Part 1: Northern corn leaf blight |
|||
GB 50493-2009 石油化工可燃气体和有毒气体检测报警设计规范(中英文版) Specification for design of combustible gas and toxic gas detection and alarm for petrochemical industry |
|||
GB 14196.2-2008 白炽灯安全要求 第2部分:家庭和类似场合普通照明用卤钨灯(中英文版) Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
|||
GB 14196.1-2008 白炽灯安全要求 第1部分:家庭和类似场合普通照明用钨丝灯(中英文版) Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
|||
GB 17790-2008 家用和类似用途空调器安装规范(中英文版) Installation specifications for household and similar air-conditioning |
|||
GB/T 16758-2008 排风罩的分类及技术条件(中英文版) The classification and technical specification of exhaust hood |
|||
GB/T 7025.2-2008 电梯主参数及轿厢、井道、机房的型式与尺寸 第2部分:Ⅳ类电梯(中英文版) Lifts - Main specifications and the dimensions arrangements for its cars, wells and machine rooms - Part 2: Lifts of class Ⅳ |
|||
GB/T 7025.1-2008 电梯主参数及轿厢、井道、机房的型式与尺寸 第1部分:Ⅰ、Ⅱ、Ⅲ、Ⅵ类电梯(中英文版) Lifts - Main specifications and the dimensions, arrangements for its cars, wells and machine rooms - Part 1: Lifts of classesⅠ、Ⅱ、Ⅲ、Ⅵ |
|||
GB/T 16453.6-2008 水土保持综合治理 技术规范 崩岗治理技术(中英文版) Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of collapse hill |
|||
GB/T 16453.5-2008 水土保持综合治理 技术规范 风沙治理技术(中英文版) Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of wind erosion |
|||
GB/T 16453.4-2008 水土保持综合治理 技术规范 小型蓄排引水工程(中英文版) Technical specification for comprehensive control of soil and water conservation - Small engineering of store, drainage and draw water |
|||
GB/T 16453.3-2008 水土保持综合治理 技术规范 沟壑治理技术(中英文版) Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of gullies |
|||
GB/T 16453.2-2008 水土保持综合治理 技术规范 荒地治理技术(中英文版) Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of waste land |
|||
GB/T 16453.1-2008 水土保持综合治理 技术规范 坡耕地治理技术(中英文版) Technical specification for comprehensive control of soil and water conservation - Technique for erosion control of slope land |
|||
GB/T 19290.3-2008 发展中的电子设备构体机械结构模数序列 第2-1部分:分规范 25mm设备构体的接口协调尺寸 详细规范 机柜和机架的尺寸(中英文版) Modular order for the development of mechanical structures for electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and r |
|||
GB/T 22404-2008 摄影 加工用化学品 无水碳酸钠和一水合碳酸钠(中英文版) Photography - Processing chemicals - Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate |
|||
GB/T 22402-2008 摄影 加工用化学品 无水硫代硫酸钠和五水合硫代硫酸钠(中英文版) Photography - Processing chemicals - Specifications for anhydrous sodium thiosulfate and sodium thiosulfate pentahydrate |
|||
GB/T 12001.1-2008 塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications |
|||
GB/T 5837-2008 液力偶合器 型式和基本参数(中英文版) Fluid coupling - Types and basic specifications |
|||
GB/T 3403.1-2008 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料(UF-和UF/MF-PMCs) 第1部分: 命名系统和分类基础(中英文版) Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF-and UF/MF-PMCs)- Part 1: Designation system and basis for specifications |
|||
GB/T 22271.1-2008 塑料 聚甲醛(POM)模塑和挤塑材料 第1部分:命名系统和分类基础(中英文版) Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 1404.1-2008 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范(中英文版) Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications |
|||
GB/T 12010.1-2008 塑料 聚乙烯醇材料(PVAL) 第1部分:命名系统和分类基础(中英文版) Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: Designation system and basis for specifications |
|||
GB/T 18964.1-2008 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Impact-resistant Polystyrene (PS-I) moulding and extrusion materials -Part 1: Designation system and basis for specifications |
|||
GB/T 20417.1-2008 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 21461.1-2008 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 21460.1-2008 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
|||
GB/T 6378.1-2008 计量抽样检验程序 第1部分:按接收质量限(AQL)检索的对单一质量特性和单个AQL的逐批检验的一次抽样方案(中英文版) Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|||
GB/T 17548-2008 信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南(中英文版) Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards |
|||
GB/T 1592.1-2008 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分:通用要求、安全要求、防护罩尺寸和空隙范围(中英文版) Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone |
|||
GB/T 22076-2008 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验(中英文版) Pneumatic fluid power - Cylindrical quick-action couplings - Plug connecting dimensions, specifications, application guidelines and testing |
|||
GB/T 1631-2008 离子交换树脂命名系统和基本规范(中英文版) Designation system and basis for specifications of ion exchange resins |
|||
GB/T 16657.2-2008 工业通信网络 现场总线规范 第2部分: 物理层规范和服务定义(中英文版) Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
|||
GB/T 17200-2008 橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范(中英文版) Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) |
|||
GB/T 10077-2008 锂原电池分类、型号命名及基本特性(中英文版) Classification, designation nomenclature and basic specifications for lithium primary batteries |
|||
GB/T 11805-2008 水轮发电机组自动化元件(装置)及其系统基本技术条件(中英文版) Basic specifications of automatic control components (devices) and their related system for hydroturbine-generating sets |
|||
GB/T 22101.1-2008 棉花抗病虫性评价技术规范 第1部分:棉铃虫(中英文版) Technical specification for evaluating resistance of cotton to disease and insect pests - Part 1: Cotton bollworm |
|||
GB/T 17507-2008 透射电子显微镜X射线能谱分析生物薄标样的通用技术条件(中英文版) General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope |
|||
GB/T 18749-2008 耐化学腐蚀陶瓷塔填料技术条件(中英文版) Standard specification for chemical-resistant ceramic tower packings |
|||
GB/T 15972.40-2008 光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减(中英文版) Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation |
|||
GB/T 15972.20-2008 光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版) Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry |
|||
GB/T 18838.4-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸(中英文版) Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot |
|||
GB/T 18838.3-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂(中英文版) Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit |
|||
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义(中英文版) Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|||
GB/T 15972.45-2008 光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序 模场直径(中英文版) Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter |
|||
GB/T 15972.21-2008 光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数(中英文版) Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry |
|||
GB/T 15972.22-2008 光纤试验方法规范 第22部分:尺寸参数的测量方法和试验程序 长度(中英文版) Specifications for optical fibre test methods - Part 22: Measurement methods and test procedures for dimensions - Length measurement |
|||
GB/T 15972.31-2008 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength |
|||
GB/T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版) Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
|||
GB/T 15972.41-2008 光纤试验方法规范 第41部分:传输特性和光学特性的测量方法和试验程序 带宽(中英文版) Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth |
|||
GB/T 15972.42-2008 光纤试验方法规范 第42部分:传输特性和光学特性的测量方法和试验程序 波长色散(中英文版) Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion |
|||
GB/T 15972.44-2008 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长(中英文版) Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength |
|||
GB/T 15972.46-2008 光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化(中英文版) Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance |
|||
GB/T 15972.47-2008 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss |
|||
GB/T 15972.49-2008 光纤试验方法规范 第49部分:传输特性和光学特性的测量方法和试验程序-微分模时延(中英文版) Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay |
|||
GB/T 15972.53-2008 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水(中英文版) Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water immersion |
|||
GB/T 15972.43-2008 光纤试验方法规范 第43部分:传输特性和光学特性的测量方法和试验程序 数值孔径(中英文版) Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture |
|||
GB/T 6113.105-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz~1000MHz天线校准用试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz |
|||
GB/T 21430.1-2008 宽带数字通信(高速率数字接入通信网络)用对绞或星绞多芯对称电缆-户外电缆 第1部分:总规范(中英文版) Multicore and symmetrical pair/quad cables for broadband digital communications(high bit rate digital access telecommunication networks) Outside plant cables - Part 1: Generic specification |
|||
GB/T 21369-2008 火力发电企业能源计量器具配备和管理要求(中英文版) Specification for equipping and managing of measuring instrument of energy in fossil power plants |
|||
GB/T 21291-2007 鱼糜加工机械安全卫生技术条件(中英文版) Technical specifications of safety and sanitation for surimi processing machinery |
|||
GB 17378.2-2007 海洋监测规范 第2部分: 数据处理与分析质量控制(中英文版) The specification for marine monitoring - Part 2:Data processing and quality control of analysis |
|||
GB/T 21127-2007 小麦抗旱性鉴定评价技术规范(中英文版) Technical specification of identification and evaluation for drought resistance in wheat |
|||
GB/T 15803-2007 东亚飞蝗测报技术规范(中英文版) Technical specification for the investigation and forecast of locusta migratoria manilensis(Meyen) |
|||
GB/T 21061-2007 国家电子政务网络技术和运行管理规范(中英文版) The specification of electronic government network technology and using management |
|||
GB/Z 6113.403-2007 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分:不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3:Uncertainties,statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced |
|||
GB/T 21068-2007 液化天然气密度计算模型规范(中英文版) Standard specification for LNG density calculation models |
|||
GB/T 12763.8-2007 海洋调查规范 第8部分: 海洋地质地球物理调查(中英文版) Specifications for oceanographic survey - Part 8:marine geology and geophysics survey |
|||
GB/T 21039.1-2007 半导体器件 分立器件 第4-1部分:微波二极管和晶体管 微波场效应晶体管空白详细规范(中英文版) Semiconductor devices - Discrete devices - Part 4-1: Microwave diodes and transistors - Microwave field effect transistors - Blank detail specification |
|||
GB/T 5343.2-2007 可转位车刀及刀夹 第2部分:可转位车刀型式尺寸和技术条件(中英文版) Turning tool holders and cartridges for indexable inserts - Part 2: Dimensions and technical specifications of turning tool holders for indexable inserts |
|||
GB/T 18910.21-2007 液晶和固态显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范(中英文版) Liquid crystal and solid-state display devices - part 2-1: Passive matrix monochrome LCD modules - Blank detail specification |
|||
GB/T 18015.6-2007 数字通信用对绞或星绞多芯对称电缆 第6部分:具有600MHz及以下传输特性的对绞或星绞对称电缆 工作区布线电缆 分规范(中英文版) Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600MHz - Work area wiring - Sectional specification |
|||
GB/T 18015.5-2007 数字通信用对绞或星绞多芯对称电缆 第5部分:具有600MHz及以下传输特性的对绞或星绞对称电缆 水平层布线电缆 分规范(中英文版) Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600MHz - Horizontal floor wiring - Sectional specification |
|||
GB/T 20719.1-2006 工业自动化系统与集成 过程规范语言 第1部分:概述与基本原理(中英文版) Industrial automation system and integration - Process specification language - Part 1: Overview and basic principles |
|||
GB/T 17574.11-2006 半导体器件 集成电路 第2-11部分:数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范(中英文版) Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory |
|||
GB/T 20628.1-2006 电气用纤维素纸 第1部分:定义和一般要求(中英文版) Specification for cellulosic papers for electrical purposes - Part 1: Definitions and general requirements |
|||
GB/T 20630.1-2006 聚酯纤维机织带规范 第1部分:定义、名称和一般要求(中英文版) Specification for polyester fibre woven tapes - Part 1: Definitions,designation and general requirements |
|||
GB/T 20627.1-2006 玻璃及玻璃聚酯纤维机织带规范 第1部分:定义、分类和一般要求(中英文版) Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements |
|||
GB/T 20540.2-2006 测量和控制数字数据通信 工业控制系统用现场总线 类型3:PROFIBUS规范 第2部分:物理层规范和服务定义(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 2: Physical layer specification and service definition |
|||
GB/T 19256.9-2006 基于XML的电子商务 第9部分:核心构件与业务信息实体规范(中英文版) Electronic business eXtensible Markup Language(ebXML) - Part 9: Core components and business information entities specification |
找到:543條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 |