中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 30280-2013
信息安全技术 鉴别与授权 地理空间可扩展访问控制置标语言(中英文版)
Information security technology—Authentication and authorization—Geospatial eXtensible Access Control Markup Language (GeoXACML)
 
GB/T 30246.7-2013
家庭网络 第7部分:控制网络通信协议(中英文版)
Home network—Part 7:Control network communication protocol
 
GB/T 30246.2-2013
家庭网络 第2部分:控制终端规范(中英文版)
Home network—Part 2:Control terminal specification
 
GB/T 30246.11-2013
家庭网络 第11部分:控制网络接口一致性测试规范(中英文版)
Home network―Part 11:Specification for conformance test of interfaces in control network
 
GB/Z 30249-2013
测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程(中英文版)
Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series
 
GB/T 30245.2-2013
工业过程测量和控制系统用远程输入输出设备 第2部分:性能评定方法(中英文版)
Remote input and output instruments for industrial process measurement and control systems—Part 2: Performance evaluating methods
 
GB/T 30245.1-2013
工业过程测量和控制系统用远程输入输出设备 第1部分:通用技术条件(中英文版)
Remote input and output instruments for industrial process measurement and control systems—Part 1: General technical conditions
 
GB/T 20014.9-2013
良好农业规范 第9部分:猪控制点与符合性规范(中英文版)
Good agricultural practice—Part 9: Pig control points and compliance criteria
 
GB/T 20014.8-2013
良好农业规范 第8部分:奶牛控制点与符合性规范(中英文版)
Good agricultural practice—Part 8: Dairy control points and compliance criteria
 
GB/T 20014.7-2013
良好农业规范 第7部分:牛羊控制点与符合性规范(中英文版)
Good agricultural practice—Part 7: Cattle and sheep control points and compliance criteria
 
GB/T 20014.6-2013
良好农业规范 第6部分:畜禽基础控制点与符合性规范(中英文版)
Good agricultural practice—Part 6: Livestock base control points and compliance criteria
 
GB/T 20014.5-2013
良好农业规范 第5部分:水果和蔬菜控制点与符合性规范(中英文版)
Good agricultural practice—Part 5: Fruit and vegetable control points and compliance criteria
 
GB/T 20014.4-2013
良好农业规范 第4部分: 大田作物控制点与符合性规范(中英文版)
Good agricultural practice―Part 4: Combinable crops control points and compliance criteria
 
GB/T 20014.3-2013
良好农业规范 第3部分:作物基础控制点与符合性规范(中英文版)
Good agricultural practice―Part 3: Crops base control points and compliance criteria
 
GB/T 20014.27-2013
良好农业规范 第27部分:蜜蜂控制点与符合性规范(中英文版)
Good agricultural practice—Part 27: Bee control points and compliance criteria
 
GB/T 20014.26-2013
良好农业规范 第26部分:烟叶控制点与符合性规范(中英文版)
Good agricultural practice—Part 26:Tobacco control points and compliance criteria
 
GB/T 20014.2-2013
良好农业规范 第2部分:农场基础控制点与符合性规范(中英文版)
Good agricultural practice—Part 2:All farm base control points and compliance criteria
 
GB/T 20014.18-2013
良好农业规范 第18部分:水产滩涂、吊养、底播养殖基础控制点与符合性规范(中英文版)
Good agricultural practice―Part 18: Intertidal mudflat culture/ hanging culture/ bottom-sowing culture base control points and compliance criteria
 
GB/T 20014.17-2013
良好农业规范 第17部分:水产围拦养殖基础控制点与符合性规范(中英文版)
Good agricultural practice―Part 17: Net enclosure culture base control points and compliance criteria
 
GB/T 20014.16-2013
良好农业规范 第16部分:水产网箱养殖基础控制点与符合性规范(中英文版)
Good agricultural practice―Part 16: Cage culture base controls points and compliance criteria
 
GB/T 20014.15-2013
良好农业规范 第15部分:水产工厂化养殖基础控制点与符合性规范(中英文版)
Good agricultural practice―Part 15: Industrial culture base control points and compliance criteria
 
GB/T 20014.14-2013
良好农业规范 第14部分:水产池塘养殖基础控制点与符合性规范(中英文版)
Good agricultural practice—Part 14: Pond culture base control points and compliance criteria
 
GB/T 20014.13-2013
良好农业规范 第13部分:水产养殖基础控制点与符合性规范(中英文版)
Good agricultural practice—Part 13: Aquaculture base control points and compliance criteria
 
GB/T 20014.12-2013
良好农业规范 第12部分:茶叶控制点与符合性规范(中英文版)
Good agricultural practice―Part 12: Tea control points and compliance criteria
 
GB/T 20014.10-2013
良好农业规范 第10部分:家禽控制点与符合性规范(中英文版)
Good agricultural practice—Part 9: Poultry control points and compliance criteria
 
GB 30485-2013
水泥窑协同处置固体废物污染控制标准(中英文版)
Standard for pollution control on co-processing of solid wastes in cement kiln
 
GB/T 4028-2013
计时仪器的检验位置标记(中英文版)
Symbolization of control positions for timekeeping instruments
 
GB 14536.16-2013
家用和类似用途电自动控制器 电起动器的特殊要求(中英文版)
Automatic electrical controls for household and similar use―Particular requirements for electric actuators
 
GB/T 30104.210-2013
数字可寻址照明接口 第210部分:控制装置的特殊要求 程序装置(设备类型9)(中英文版)
Digital addressable lighting interface―Part 210: Particular requirements for control gears―Sequencer (Device Type 9)
 
GB/T 30104.209-2013
数字可寻址照明接口 第209部分:控制装置的特殊要求 颜色控制(设备类型8)(中英文版)
Digital addressable lighting interface―Part 209: Particular requirements for control gear―Colour control (device type 8)
 
GB/T 30104.208-2013
数字可寻址照明接口 第208部分:控制装置的特殊要求 开关功能(设备类型7)(中英文版)
Digital addressable lighting interface―Part 208: Particular requirements for control gear―Switching function (device type 7)
 
GB/T 30104.207-2013
数字可寻址照明接口 第207部分:控制装置的特殊要求 LED模块(设备类型6)(中英文版)
Digital addressable lighting interface―Part 207:Particular requirements for control gear―LED modules (device type 6)
 
GB/T 30104.206-2013
数字可寻址照明接口 第206部分:控制装置的特殊要求 数字信号转换成直流电压(设备类型5)(中英文版)
Digital addressable lighting interface―Part 206: Particular requirements for control gear―Conversion from digital signal into d. c. voltage (device type 5)
 
GB/T 30104.205-2013
数字可寻址照明接口 第205部分:控制装置的特殊要求 白炽灯电源电压控制器(设备类型4)(中英文版)
Digital addressable lighting interface―Part 205: Particular requirements for control gear―Supply voltage controller for incandescent lamps (device type 4)
 
GB/T 30104.204-2013
数字可寻址照明接口 第204部分:控制装置的特殊要求 低压卤钨灯(设备类型3)(中英文版)
Digital addressable lighting interface―Part 204: Particular requirements for control gear―Low voltage halogen lamps (device type 3)
 
GB/T 30104.203-2013
数字可寻址照明接口 第203部分:控制装置的特殊要求 放电灯(荧光灯除外)(设备类型2)(中英文版)
Digital addressable lighting interface―Part 203: Particular requirements for control gear―Discharge lamps (excluding fluorescent lamps)(device type 2)
 
GB/T 30104.202-2013
数字可寻址照明接口 第202部分:控制装置的特殊要求 自容式应急照明 (设备类型1)(中英文版)
Digital addressable lighting interface―Part 202: Particular requirements for control gear―Self-contained emergency lighting (device type 1)
 
GB/T 30104.201-2013
数字可寻址照明接口 第201部分:控制装置的特殊要求 荧光灯(设备类型0)(中英文版)
Digital addressable lighting interface―Part 201: Particular requirements for control gear―Fluorescent lamps (device type 0)
 
GB/T 30104.102-2013
数字可寻址照明接口 第102部分:一般要求 控制装置(中英文版)
Digital addressable lighting interface―Part 102: General requirments―Control gear
 
GB 4793.9-2013
测量、控制和实验室用电气设备的安全要求 第9部分:实验室用分析和其他目的自动和半自动设备的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control and laboratory use―Part 9: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
 
GB/T 30175-2013
机械安全 应用GB/T 16855.1和GB 28526设计安全相关控制系统的指南(中英文版)
Safety of machinery―Guidance on the application of GB/T 16855.1 and GB 28526 in the design of safety-related control systems
 
GB/T 30093-2013
自动化控制系统可靠性技术评审程序(中英文版)
Reliability technique review procedure for automation control system
 
GB/T 14048.21-2013
低压开关设备和控制设备 第5-9部分:控制电路电器和开关元件 流量开关(中英文版)
Low-voltage switchgear and controlgear―Part 5-9: Control circuit devices and switching elements―Flow rate switches
 
GB/T 14048.20-2013
低压开关设备和控制设备 第5-8部分:控制电路电器和开关元件 三位使能开关(中英文版)
Low-voltage switchgear and controlgear―Part 5-8: Control circuit devices and switching elements―Three-position enabling switches
 
GB/T 14048.19-2013
低压开关设备和控制设备 第5-7部分:控制电路电器和开关元件 用于带模拟输出的接近设备的要求(中英文版)
Low-voltage switchgear and controlgear―Part 5-7: Control circuit devices and switching elements―Requirements for proximity devices with analogue output
 
GB/T 12549-2013
汽车操纵稳定性术语及其定义(中英文版)
Terms and definitions for vehicle controllability and stability
 
GB/T 18261-2013
防霉剂对木材霉菌及变色菌防治效力的试验方法(中英文版)
Test method for anti-mildew agents in controlling wood mould and stain fungi
 
GB/T 29821-2013
工业过程测量和控制系统用仪表可靠性技术报告编写导则(中英文版)
Rules for drafting reliability technical report of industrial process measurement and control system meter
 
GB/T 19903.111-2013
工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第111部分:铣床用刀具(中英文版)
Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 111: Tools for milling machines
 
GB/T 17614.3-2013
工业过程控制系统用变送器 第3部分:智能变送器性能评定方法(中英文版)
Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
 
GB/T 16656.238-2013
工业自动化系统与集成 产品数据表达与交换 第238部分:应用协议:计算机数值控制器用的应用解释模型(中英文版)
Industrial automation systems and integration - Product data representation and exchange - Part 238: Application protocol: Application interpreted model for computerized numeric controllers
 
GB/T 50892-2013
油气田及管道工程仪表控制系统设计规范(中英文版)
Code for engineering design of instrument control system for oil/gas fields and pipelines
 
GB/T 19277.2-2013
受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量(中英文版)
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
 
GB/T 29771.1-2013
工业机械数字控制器 第1部分:通用技术条件(中英文版)
Numerical controller of industrial machines - Part 1: General requipments
 
GB/T 29735-2013
采暖空调用自力式流量控制阀(中英文版)
Self-operating flow control valve
 
GB/T 29800-2013
公路监控系统地图板装置(中英文版)
Wallmap of highway traffic surveillance and control system
 
GB/Z 29619.6-2013
测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第6部分:应用层协议规范(中英文版)
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification - Part 6: Application Layer Protocol specification
 
GB/Z 29619.5-2013
测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第5部分:应用层服务的定义(中英文版)
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 5: Application Layer service definition
 
GB/Z 29619.4-2013
测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第4部分:数据链路协议规范(中英文版)
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 4: Data Link protocol specification
 
GB/Z 29619.3-2013
测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第3部分:数据链路服务定义(中英文版)
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 3: Data Link service definition
 
GB/Z 29619.2-2013
测量和控制数字数据通信 工业控制系统用现场总线 类型8: INTERBUS规范 第2部分:物理层规范和服务定义(中英文版)
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS Specification - Part 2: Physical Layer specification and service definition
 
GB/Z 29619.1-2013
测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第1部分:概述(中英文版)
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification - Part 1: Overview
 
GB/Z 29496.3-2013
控制与通信网络CC-Link Safety 规范 第3部分:实现(中英文版)
Control & communication network CC-Link Safety Specification - Part 3: Implementation
 
GB/Z 29496.2-2013
控制与通信网络CC-Link Safety 规范 第2部分:行规(中英文版)
Control & communication network CC-Link Safety Specification - Part 2: Profiles
 
GB/Z 29496.1-2013
控制与通信网络CC-Link Safety 规范 第1部分:概述/协议(中英文版)
Control & communication network CC-Link Safety Specification - Part 1: Overview / Protocol
 
GB/T 20965-2013
控制网络HBES技术规范 住宅和楼宇控制系统(中英文版)
Control network HBES technical specification - Home and building control system
 
GB/T 29605-2013
感官分析 食品感官质量控制导则(中英文版)
Sensory analysis - Guide for food sensory quality control
 
GB/T 29545-2013
机床数控系统 可靠性设计(中英文版)
Numerical control system of machine tools - Reliability design
 
GB/T 17398-2013
铅冶炼防尘防毒技术规程(中英文版)
Code of dust and poison control for lead smelting
 
GB/T 29489-2013
高压交流开关设备和控制设备的感性负载开合(中英文版)
lnductive load switching of high-voltage alternating current switchgear and controlgear
 
GB/T 29482.1-2013
工业机械数字控制系统 第1部分:通用技术条件(中英文版)
Numerical control system of industrial machines - Part 1: General requipments
 
GB 50881-2013
疾病预防控制中心建筑技术规范(中英文版)
Architectural and technical code for center for disease control and prevention
 
GB/T 50839-2013
城市轨道交通工程安全控制技术规范(中英文版)
Technical code of urban rail transit engineering safety control
 
GB 14048.1-2012
低压开关设备和控制设备 第1部分:总则(中英文版)
Low-voltage switchgear and controlgear - Part 1: General rules
 
GB/T 29053-2012
防尘防毒基本术语(中英文版)
Basic terminology of dust and poison control
 
GB/T 29600-2012
移动实验室用温湿度控制系统技术规范(中英文版)
Technical specification of the temperature & humidity control system for the mobile laboratory
 
GB/T 29468-2012
洁净室及相关受控环境 围护结构夹芯板应用技术指南(中英文版)
Cleanroom and associated controlled environments - Guidelines of partition sandwich panel application technology
 
GB/T 29469-2012
洁净室及相关受控环境 性能及合理性评价(中英文版)
Cleanrooms and associated controlled environments - Evaluation of performance and rationality
 
GB/T 29265.303-2012
信息技术 信息设备资源共享协同服务 第303部分:通用控制设备描述(中英文版)
Information technology - Information device intelligent grouping and resource sharing - Part 303: General control device description
 
GB/T 29265.202-2012
信息技术 信息设备资源共享协同服务 第202部分:通用控制基础协议(中英文版)
Information technology - Information device intelligent grouping and resource sharing - Part 202: General control core protocol
 
GB/T 29098-2012
道路交通管理数据字典 交通信号控制(中英文版)
Road traffic management data dictionary - Traffic signal control
 
GB/T 29085-2012
卫星防污染技术要求(中英文版)
Technical requirements for contamination control of satellite
 
GB/T 29001.4-2012
机床数控系统 NCUC-Bus现场总线协议规范 第4部分:应用层(中英文版)
Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 4:Application layer
 
GB/T 29001.3-2012
机床数控系统 NCUC-Bus现场总线协议规范 第3部分:数据链路层(中英文版)
Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 3:Data link layer
 
GB/T 29001.2-2012
机床数控系统 NCUC-Bus现场总线协议规范 第2部分:物理层(中英文版)
Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 2:Physical layer
 
GB/T 29001.1-2012
机床数控系统 NCUC-Bus现场总线协议规范 第1部分:总则(中英文版)
Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 1:General principles
 
GB/T 27413-2012
石油产品检测实验室质量控制与质量评估(中英文版)
Quality control and quality estimation in petroleum products testing laboratory
 
GB 29364-2012
防火门监控器(中英文版)
Indicating and control unit for fire resistant doorsets
 
GB/T 29402.3-2012
谷物和豆类储存 第3部分:有害生物的控制(中英文版)
Storage of cereals and pulses - Part 3: Control of attack by pests
 
GB/T 8870.1-2012
自动化系统与集成 机床数值控制 程序格式和地址字定义 第1部分:点位、直线运动和轮廓控制系统的数据格式(中英文版)
Automation systems and integration - Numerical control of machines - Program format and definitions of address words - Part 1: Data format for positioning,line motion and contouring control systems
 
GB/T 29308-2012
核电厂安全重要仪表和控制系统老化管理要求(中英文版)
Management requirement of ageing of instrumentation and control systems important to safety for nuclear power plants
 
GB/T 29254-2012
实验室反应釜用控制器(中英文版)
Laboratory autoclave controller
 
GB/T 29247-2012
工业自动化仪表通用试验方法(中英文版)
General methods for testing the performance of industrial process measurement and control instruments
 
GB/T 29135-2012
耙吸挖泥船疏浚监控系统(中英文版)
Hopper dredger supervisory control system
 
GB/T 28966-2012
绞吸/斗轮挖泥船疏浚监控系统(中英文版)
Cutter/bucket-wheel dredger supervisory control system
 
GB/T 28965-2012
抓斗挖泥船疏浚监控系统(中英文版)
Grab dredger supervisory control system
 
GB/T 19384.3-2012
纺织机械与附件 针织机用输纱器与纱线控制装置 第3部分:连接电缆和互联电缆尺寸(中英文版)
Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables
 
GB/T 19384.2-2012
纺织机械与附件 针织机用输纱器与纱线控制装置 第2部分:关联尺寸(中英文版)
Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 2: Connecting dimensions for yarn feeders and yarn control devices
 
GB/T 19384.1-2012
纺织机械与附件 针织机用输纱器与纱线控制装置 第1部分:术语(中英文版)
Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 1: Vocabulary
 
GB/T 18833-2012
道路交通反光膜(中英文版)
Retroreflective sheeting for traffic control
 

找到:2248條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [8] [9] [10] [11] [12] [13] [14]