中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 26416.3-2010 镝铁合金化学分析方法 第3部分:钙、镁、铝、硅、镍、钼、钨量的测定 等离子发射光谱法(中英文版) Chemical analysis methods of dysprosium ferroalloy - Part 3 : Determination of calcium, magnesium, aluminum, silicon, nickel, molybdenum, and tungsten contents - Inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 1690-2010 硫化橡胶或热塑性橡胶 耐液体试验方法(中英文版) Rubber,vulcanized or thermoplastic - Determination of the effect of liquids |
![]() |
|
![]() |
GB/T 16477.3-2010 稀土硅铁合金及镁硅铁合金化学分析方法 第3部分:氧化镁含量的测定 电感耦合等离子体发射光谱法(中英文版) Chemical analysis methods of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy - Part 3: Determination of magnesia content - Inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 5121.28-2010 铜及铜合金化学分析方法 第28部分:铬、铁、锰、钴、镍、锌、砷、硒、银、镉、锡、锑、碲、铅、铋量的测定 电感耦合等离子体质谱法(中英文版) Method for chemical analysis of copper and copper alloys - Part 28:Determination of Chromium,Iron,Manganese,Cobalt,Nickel,Zinc,Arsenic, Selenium,Silver,Cadmium,Tin,Antimony,Tellurium,Lead and Bismuth content - Inductively coupled plasma-mass spectrum me |
![]() |
|
![]() |
GB/T 25934.2-2010 高纯金化学分析方法 第2部分:ICP-MS-标准加入校正-内标法 测定杂质元素的含量(中英文版) Methods for chemical analysis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity elements contents |
![]() |
|
![]() |
GB/T 25934.1-2010 高纯金化学分析方法 第1部分:乙酸乙脂萃取分离ICP-AES法 测定杂质元素的含量(中英文版) Methods for chemical analysis of high purity gold - Part 1: Ethyl acetate extraction separation - Inductively coupled plasma - atomic emission spectrometry - Determination of impurity elements contents |
![]() |
|
![]() |
GB/T 17418.6-2010 地球化学样品中贵金属分析方法 第6部分:铂量、钯量和金量的测定 火试金富集-发射光谱法(中英文版) Methods for analysis of noble metals in geochemical samples - Part 6: Determination of platinum, palladium and gold content - Preconcentration by fire assay - emission spectrometry |
![]() |
|
![]() |
GB/T 17418.7-2010 地球化学样品中贵金属分析方法 第7部分:铂族元素量的测定 镍锍试金-电感耦合等离子体质谱法(中英文版) Methods for analysis of noble metals in geochemical samples - Part 7: Determination of platinum group elements - By nickel sulfide fire assay-inductively coupled plasma mass spectrometry |
![]() |
|
![]() |
GB/T 17418.2-2010 地球化学样品中贵金属分析方法 第2部分:铂量和铑量的测定 硫脲富集-催化极谱法(中英文版) Methods for analysis of noble metals in geochemical samples - Part 2:Determination of platinum and rhodium content-Preconcentration by thiourea-catalytic polarographic method |
![]() |
|
![]() |
GB/T 1632.3-2010 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第3部分:聚乙烯和聚丙烯(中英文版) Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes |
![]() |
|
![]() |
GB/T 25213-2010 煤的塑性测定 恒力矩吉氏塑性仪法(中英文版) Determination of plastic properties of coal - Constant-torque gieseler plastometer method |
![]() |
|
![]() |
GB/T 15597.2-2010 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样制备和性能测定(中英文版) Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
![]() |
|
![]() |
GB/T 12008.5-2010 塑料 聚醚多元醇 第5部分:酸值的测定(中英文版) Plastics - Polyether polyols - Part 5:Determination of acidity as acid number |
![]() |
|
![]() |
GB/T 25278-2010 塑料 用毛细管和狭缝口模流变仪测定塑料的流动性(中英文版) Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers |
![]() |
|
![]() |
GB/T 12008.7-2010 塑料 聚醚多元醇 第7部分:粘度的测定(中英文版) Plastics - Polyether polyols - Part 7:Determination of viscosity |
![]() |
|
![]() |
GB/T 25186-2010 表面化学分析 二次离子质谱 - 由离子注入参考物质确定相对灵敏度因子(中英文版) Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials |
![]() |
|
![]() |
GB/T 25273-2010 液晶显示器(LCD)用薄膜 雾度测定方法 积分球法(中英文版) Films for liquid crystal display(LCD) - Determination of haze with integrating sphere |
![]() |
|
![]() |
GB/T 25274-2010 液晶显示器(LCD)用薄膜 紫外吸收率测定方法(中英文版) Films for liquid crystal display(LCD) - Determination of ultraviolet absorbance |
![]() |
|
![]() |
GB/T 25276-2010 液晶显示器(LCD)用三醋酸纤维素酯(TAC)膜 厚度测定方法(中英文版) Triacetyl cellulose (TAC) films for liquid crystal display(LCD)- Determination of thickness |
![]() |
|
![]() |
GB/T 25277-2010 塑料 均聚聚丙烯(PP-H)中酚类抗氧剂和芥酸酰胺爽滑剂的测定 液相色谱法(中英文版) Plastics - Determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations - liquid chromatography (LC) |
![]() |
|
![]() |
GB/T 12008.6-2010 塑料 聚醚多元醇 第6部分:不饱和度的测定(中英文版) Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation |
![]() |
|
![]() |
GB/T 3402.2-2010 塑料 氯乙烯均聚和共聚树脂 第2部分:试样制备及性能测定(中英文版) Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties |
![]() |
|
![]() |
GB/T 12010.2-2010 塑料 聚乙烯醇材料(PVAL) 第2部分:性能测定(中英文版) Plastic - Poly(vinyl alcohol)(PVAL)materials - Part 2: Determination of properties |
![]() |
|
![]() |
GB/T 24916-2010 表面处理溶液 金属元素含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Surface treatment solution - Determination of metal element contents - Inductively coupled plasma atomic emission spectrometric method |
![]() |
|
![]() |
GB/T 9345.5-2010 塑料 灰分的测定 第5部分:聚氯乙烯(中英文版) Plastics - Determination of ash - Part 5: Poly(vinyl chloride) |
![]() |
|
![]() |
GB/T 16781.2-2010 天然气 汞含量的测定 第2部分:金-铂合金汞齐化取样法(中英文版) Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy |
![]() |
|
![]() |
GB/T 24875-2010 畜禽粪便中铅、镉、铬、汞的测定 电感耦合等离子体质谱法(中英文版) Determination of lead,cadmium,chromium,mercury contents in animal manure - Inductively Coupled Plasma Mass Spectrometry method |
![]() |
|
![]() |
GB/T 16484.20-2009 氯化稀土、碳酸轻稀土化学分析方法 第20部分:氧化镍、氧化锰、氧化铅、氧化铝、氧化锌、氧化钍量的测定 电感耦合等离子体质谱法(中英文版) Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 20: Determination of nickel oxide, manganese oxide, lead oxide, aluminum oxide, zinc oxide, thorium oxide content - Inductively coupled plasma mass spectrometry |
![]() |
|
![]() |
GB/T 24520-2009 铸铁和低合金钢 镧、铈和镁含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Cast iron and low alloy steel - Determination of lanthanum, cerium and magnesium content - Inductively coupled plasma atomic emission spectrometric method |
![]() |
|
![]() |
GB/T 24514-2009 钢表面锌基和(或)铝基镀层 单位面积镀层质量和化学成分测定 重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法(中英文版) Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
![]() |
|
![]() |
GB/T 24585-2009 镍铁 磷、锰、铬、铜、钴和硅含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Ferronickel - Determination of phosphorus, manganese, chromium, copper, cobalt and silicon contents - Inductively coupled plasma atomic emission spectrometric method |
![]() |
|
![]() |
GB/T 24583.8-2009 钒氮合金 硅、锰、磷、铝含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Vanadium-Nitrogen alloy - Determination of silicon, manganese, phosphorus, aluminum content - Inductively inductively coupled plasma atomic emission spectrometric method |
![]() |
|
![]() |
GB/T 16484.5-2009 氯化稀土、碳酸轻稀土化学分析方法 第5部分:氧化钡量的测定 电感耦合等离子体发射光谱法(中英文版) Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 5: Determination of barium oxide content - Inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 16484.3-2009 氯化稀土、碳酸轻稀土化学分析方法 第3部分:15个稀土元素氧化物配分量的测定 电感耦合等离子体发射光谱法(中英文版) Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 3: Determination of fifteen REO relative contents - Inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 16484.2-2009 氯化稀土、碳酸轻稀土化学分析方法 第2部分:氧化铕量的测定 电感耦合等离子体质谱法(中英文版) Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 2: Determination of europium oxide content - Inductively coupled plasma mass spectrometry |
![]() |
|
![]() |
GB/T 24282-2009 塑料 聚丙烯中二甲苯可溶物含量的测定(中英文版) Plastics - Determination of xylene-soluble matter in polypropylene |
![]() |
|
![]() |
GB/T 24194-2009 硅铁 铝、钙、锰、铬、钛、铜、磷和镍含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Ferrosilicon - Determination of aluminium, calcium, manganese, chromium, titanium, copper, phosphorus and nickel content - Inductively coupled plasma atomic emission spectrometric method |
![]() |
|
![]() |
GB/T 24197-2009 锰矿石 铁、硅、铝、钙、钡、镁、钾、铜、镍、锌、磷、钴、铬、钒、砷、铅和钛含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Manganese ores - Determination of iron,silicon,aluminium,calcium,barium,magnesium,potassium,copper,nickel,zinc,phosphorus,cobalt,chromium,vanadium,arsenic,lead,titanium and vanadium - Inductively coupled plasma atomic emiss |
![]() |
|
![]() |
GB/T 24193-2009 铬矿石和铬精矿 铝、铁、镁和硅含量的测定 电感耦合等离子体原子发射光谱法(中英文版) Chromium ores and concentrates - Determination of aluminium, iron , magnesium and silicon content - Inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 12008.4-2009 塑料 聚醚多元醇 第4部分:钠和钾的测定(中英文版) Plastics - Polyether polyols - Part 4: Determination of sodium and potassium |
![]() |
|
![]() |
GB/T 15596-2009 塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定(中英文版) Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass,natural weathering or laboratory light sources |
![]() |
|
![]() |
GB/T 12006.1-2009 塑料 聚酰胺 第1部分:黏数测定(中英文版) Plastics - Polyamides - Part 1: Determination of viscosity number |
![]() |
|
![]() |
GB/T 12006.2-2009 塑料 聚酰胺 第2部分:含水量测定(中英文版) Plastics - Polyamides - Part 2: Determination of water content |
![]() |
|
![]() |
GB/T 2406.2-2009 塑料 用氧指数法测定燃烧行为 第2部分:室温试验(中英文版) Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test |
![]() |
|
![]() |
GB/T 12008.3-2009 塑料 聚醚多元醇 第3部分:羟值的测定(中英文版) Plastics - Polyether polyols - Part 3: Determination of hydroxyl number |
![]() |
|
![]() |
GB/T 12009.3-2009 塑料 多亚甲基多苯基异氰酸酯 第3部分:黏度的测定(中英文版) Plastics - Polymethylene polyphenyl isocyanate - Part 3: Determination of viscosity |
![]() |
|
![]() |
GB/T 14905-2009 橡胶和塑料软管 各层间粘合强度的测定(中英文版) Rubber and plastics hoses - Determination of adhesion between components |
![]() |
|
![]() |
GB/T 19466.6-2009 塑料 差示扫描量热法(DSC)第6部分:氧化诱导时间(等温OIT)和氧化诱导温度(动态OIT)的测定(中英文版) Plastics - Differential scanning calorimetry(DSC)- Part 6: Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT) |
![]() |
|
![]() |
GB/T 24148.2-2009 塑料 不饱和聚酯树脂(UP-R) 第2部分:试样制备和性能测定(中英文版) Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties |
![]() |
|
![]() |
GB/T 24148.4-2009 塑料 不饱和聚酯树脂(UP-R) 第4部分:粘度的测定(中英文版) Plastics - Unsaturated polyester resin - Part 4: Determination of viscosity |
![]() |
找到:977條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [5] [6] [7] [8] [9] [10] [11] |