中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB 50550-2010
建筑结构加固工程施工质量验收规范(中英文版)
Code for acceptance of construction quality of strengthening building structures
 
GB/T 8721-2009
炭素材料抗拉强度测定方法(中英文版)
Method for the determination of tensile strength of carbonaceous materials
 
GB/T 1431-2009
炭素材料耐压强度测定方法(中英文版)
Carbon materials-determination of the compressive strength
 
GB/T 24277-2009
评估部分型式试验成套设备(PTTA)短路耐受强度的一种方法(中英文版)
A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
 
GB/T 13465.9-2009
不透性石墨粘接剂粘接抗拉强度试验方法(中英文版)
Test method of the adhesion tensile strength of graphite impemeable adhesion agent
 
GB/T 13465.8-2009
不透性石墨粘接剂粘接剪切强度试验方法(中英文版)
Test method of the adhesion shear strength of impermeable graphite adhesion agent
 
GB/T 23561.9-2009
煤和岩石物理力学性质测定方法 第9部分:煤和岩石三轴强度及变形参数测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock
 
GB/T 23561.7-2009
煤和岩石物理力学性质测定方法 第7部分:单轴抗压强度测定及软化系数计算方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient
 
GB/T 11837-2009
混凝土管用混凝土抗压强度试验方法(中英文版)
Test methods of the concrete compressive strength of concrete pipes for water
 
GB/T 21956.4-2009
农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分:后置式动态试验方法(中英文版)
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS
 
GB/T 22709-2008
架空线路玻璃或瓷绝缘子串元件绝缘体机械破损后的残余强度(中英文版)
Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric
 
GB/T 4925-2008
渔网 合成纤维网片强力与断裂伸长率试验方法(中英文版)
Fishing nets - Method of test for the determination of strength and breaking elongation of netting of synthetic fiber
 
GB/T 18252-2008
塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度(中英文版)
Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
 
GB/T 11387-2008
压电陶瓷材料性能测试方法 静态弯曲强度的测试(中英文版)
Test methods for the properties of piezoelectric ceramics - Test for the static flexural strength
 
GB/T 7121.2-2008
农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分:后置式动态试验方法(中英文版)
The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method
 
GB/T 529-2008
硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样)(中英文版)
Rubber,vulcanized or thermoplastic - Determination of tear strength(Trouser,angle and crescent test pieces)
 
GB/T 21956.3-2008
农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法(中英文版)
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS
 
GB/T 21956.2-2008
农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法(中英文版)
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS
 
GB/T 21956.1-2008
农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法(中英文版)
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS
 
GB/T 7121.1-2008
农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法(中英文版)
The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS
 
GB/T 21867.1-2008
颜料和体质颜料 分散性的评定方法 第1部分:由着色颜料的着色力变化进行评定(中英文版)
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1:Assessment from the change in tinting strength of coloured pigments
 
GB/T 3074.1-2008
石墨电极抗折强度测定方法(中英文版)
Method for the determination of the flexure strength of graphite electrodes
 
GB/T 11363-2008
钎焊接头强度试验方法(中英文版)
Test method of the strength for brazed and soldered joint
 
GB/T 12829-2006
硫化橡胶或热塑性橡胶小试样(德尔夫特试样)撕裂强度的测定(中英文版)
Rubber, vulcanized or thermoplastic - Determination of tear strength of small test pieces (Delft test pieces)
 
GB 15083-2006
汽车座椅、座椅固定装置及头枕强度要求和试验方法(中英文版)
Strength requirement and test of automobile seats, their anchorages and any head restraints
 
GB/T 1450.2-2005
纤维增强塑料冲压式剪切强度试验方法(中英文版)
Fibre-reinforced plastic composites-Determination of the punch-type shear strength
 
GB/T 19810-2005
聚乙烯(PE)管材和管件 热熔对接接头 拉伸强度和破坏形式的测定(中英文版)
Polyethylene(PE)pipe and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
 
GB/T 19496-2004
钻芯检测离心高强混凝土抗压强度试验方法(中英文版)
Determinating of the compressive strength of spun high-strength concrete cores
 
GB/T 1634.3-2004
塑料 负荷变形温度的测定 第3部分:高强度热固性层压材料(中英文版)
Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates
 
GB/T 8642-2002
热喷涂 抗拉结合强度的测定(中英文版)
Thermal spraying--Determination of tensile adhesive strength
 
GB/T 18747.2-2002
厌氧胶粘剂剪切强度的测定(轴和套环试验法)(中英文版)
The determination of shear strength of anaerobic adhesives using pin-and-collar specimens
 
GB/T 18747.1-2002
厌氧胶粘剂扭矩强度的测定(螺纹紧固件)(中英文版)
The determination of torque strength of anaerobic adhesives (Threaded fasteners)
 
GB/T 11028-1999
测定浸渍剂对漆包线基材粘结强度的试验方法(中英文版)
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
 
GB/T 17186-1997
钢制管法兰连接强度计算方法(中英文版)
Calculating method for the strength of steel pipe flanged joint
 
GB/T 4506-1984
针尖锋利度和强度试验方法(中英文版)
Method for the test of sharpness and strengthof needles tips
 

找到:85條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2