中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 24129-2009 胶鞋、运动鞋外底不留痕试验方法(中英文版) Testing method for the non-marking outsole of rubber shoes and sports shoes |
|||
GB/T 14018-2009 木材握钉力试验方法(中英文版) Method of testing nail holding power of wood |
|||
GB/T 22906.7-2008 纸芯的测定 第7部分:弹性模量的测定(三点法)(中英文版) Testing of cores - Part 7: Determination of flexural modulus by the three-point method |
|||
GB/T 9291-2008 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法(中英文版) Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions |
|||
GB/T 3137-2007 钽粉电性能试验方法(中英文版) Testing method for electrical properties of tantalum powder |
|||
GB/T 20321.2-2006 离网型风能、太阳能发电系统用逆变器 第2部分:试验方法(中英文版) Inverter of wind and solar energy supply power system for off-grid - Part 2: Testing method |
|||
GB/T 6242-2006 种植机械 马铃薯种植机 试验方法(中英文版) Equipment for planting - Potato planters - Method of testing |
|||
GB/T 5170.18-2005 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments |
|||
GB/T 19934.1-2005 液压传动 金属承压壳体的疲劳压力试验 第1部分:试验方法(中英文版) Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method |
|||
GB/T 5270-2005 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述(中英文版) Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion |
|||
GB/T 5451-2001 农药可湿性粉剂润湿性测定方法(中英文版) Testing method for the wettability of dispersible powders of pesticides |
|||
GB/T 1602-2001 农药熔点测定方法(中英文版) Testing method of melting point for pesticides |
|||
GB/T 18214.1-2000 全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果(中英文版) Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards,methods of testing and required test results |
|||
GB/T 17603-1998 光解性塑料户外暴露试验方法(中英文版) Method for outdoor exposure testing of photodegradable plastics |
|||
GB/T 12840-1996 盒式磁带录音机运带机构可靠性要求和试验方法(中英文版) Reliability requirements and testing methods for tape transport mechanism of cassette tape recorders |
|||
GB/T 16664-1996 企业供配电系统节能监测方法(中英文版) Monitoring and testing method for energy saving of power supply distribution system of industrial enterprise |
|||
GB/T 16310.1-1996 船舶散装运输液体化学品危害性评价规范 水生生物急性毒性试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Acute toxicity testing methods for aquatic organism |
|||
GB/T 16310.2-1996 船舶散装运输液体化学品危害性评价规范 水生生物积累性试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Bioaccumulation testing method for aquatic organism |
|||
GB/T 16310.3-1996 船舶散装运输液体化学品危害性评价规范 水生生物沾染试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Taint testing method for aquatic organism |
|||
GB/T 13823.16-1995 振动与冲击传感器的校准方法 温度响应比较测试法(中英文版) Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison |
|||
GB/T 14235.1-1993 熔模铸造模料 熔点测定方法(冷却曲线法)(中英文版) Testing method for melting point of pattern materials in investment casting |
|||
GB/T 8106-1987 方向控制阀试验方法(中英文版) Hydraulic fluid power--Valves--Testing method of directional control valves |
|||
GB/T 8105-1987 压力控制阀试验方法(中英文版) Hydraulic fluid power--Valves--Testing method of pressure control valves |
|||
GB/T 8104-1987 流量控制阀试验方法(中英文版) Hydraulic fluid power--Valves--Testing method of flow control valves |
|||
GB/T 5888-1986 苎麻纤维素聚合度测定方法(中英文版) Testing method of degree of polymerization oframie cellulose |
|||
GB/T 5619-1985 防锈材料百叶箱试验方法(中英文版) Shed storage exposure test--Testing method for rust-proof material |
找到:76條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |