中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 15972.34-2021 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲(中英文版) Specifications for optical fibre test methods—Part 34:Measurement methods and test procedures for mechanical characteristics—Fibre curl |
|||
GB/T 15972.30-2021 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版) Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test |
|||
GB/T 39798-2021 动车组玻璃光学性能试验方法(中英文版) Test methods for optical properties of glass used on multiple units |
|||
GB/T 15972.49-2021 光纤试验方法规范 第49部分:传输特性的测量方法和试验程序 微分模时延(中英文版) Specifications for optical fibre test methods—Part 49: Measurement methods and test procedures for transmission characteristics—Differential mode delay |
|||
GB/T 16850.3-2021 光放大器试验方法 第3部分:单波道光放大器噪声参数(中英文版) Optical amplifiers test methods—Part 3:Noise figure parameters for single-channel amplifiers |
|||
GB/T 15972.32-2021 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods—Part 32: Measurement methods and test procedures for mechanical characteristics—Coating strippability |
|||
YY/T 1694-2020 放射治疗用体表光学摆位设备 性能和试验方法(中英文版) Body surface optical positioning equipment for radiotherapy - Performance and test methods |
|||
GB/T 39585-2020 光电测量 配光测试系统的性能要求和检测方法(中英文版) Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system |
|||
GB/T 37831-2019 航空玻璃光学性能试验方法(中英文版) Test methods for optical properties for aircraft glass |
|||
GB/T 36403-2018 红外光学玻璃红外透过率测试方法 傅里叶变换法(中英文版) Test methods of infrared transmittance for infrared optical glass—Fourier transform method |
|||
GB/T 15972.44-2017 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长(中英文版) Specifications for optical fibre test methods—Part 44: Measurement methods and test procedures for transmission and optical characteristics—Cut-off wavelength |
|||
GB/T 35118-2017 掺铒钇铝石榴石激光晶体光学性能测量方法(中英文版) Test methods of optical performance for Erbium-doped Yttrium Aluminum Garnet laser crystal |
|||
GB/T 15972.48-2016 光纤试验方法规范 第48部分:传输特性和光学特性的测量方法和试验程序 偏振模色散(中英文版) Specifications for optical fibre test methods—Part 48: Measurement methods and test procedures for transmission and optical characteristics—Polarization mode dispersion |
|||
YD/T 3022.2-2016 通信光缆机械性能试验方法 第2部分:接插线光缆中被覆光纤的压缩位移(中英文版) (Communication Cable mechanical performance test methods - Part 2: fiber optic patch cord compression displacement of the coated optical fiber) |
|||
YD/T 2798.1-2015 用于光通信的光收发合一模块测试方法 第1部分:单波长型(中英文版) (Optical transceiver module for optical communication test methods - Part 1: Single-wavelength type) |
|||
GB/T 31248-2014 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法(中英文版) Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions |
|||
YD/T 1527-2013 光电(波长/模式)转换器技术要求及测试方法(中英文版) Technical requirements and test methods for optoelectronic (wavelength/mode) converter |
|||
YD/T 2489-2013 可重构的光分插复用(roadm)设备测试方法(中英文版) Test methods for reconfigurable optical add multiplexing (ROADM) equipment |
|||
GB/T 29199-2012 光缆防鼠性能测试方法(中英文版) Test methods for rodent resistance of optical fiber cable |
|||
GB/T 11417.5-2012 眼科光学 接触镜 第5部分: 光学性能试验方法(中英文版) Ophthalmic optics - Contact lenses - Part 5: Testing methods for optical properties |
找到:98條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 |