中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 32280-2022 硅片翘曲度和弯曲度的测试? 自动非接触扫描法(中英文版) Test method for warp and bow of silicon wafers—Automated non-contact scanning method |
|||
GB/T 22639-2022 铝合金产品的剥落腐蚀试验方法(中英文版) Test method of exfoliation corrosion for aluminium alloy products |
|||
GB/T 24581-2022 硅单晶中III、V族杂质含量的测定 低温傅立叶变换红外光谱法(中英文版) Test method for Ⅲ and Ⅴ impurities content in single crystal silicon—Low temperature FT-IR analysis method |
|||
GB/T 12967.4-2022 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分:耐光热性能的测定(中英文版) Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance |
|||
GB/T 29035-2022 柔性石墨填料环试验方法(中英文版) Test method for flexible graphite packing rings |
|||
GB/T 42252-2022 航空用高锁螺母力矩及预紧力测试方法(中英文版) Torque and pretightening force test method of high lock nut for aviation |
|||
GB/T 41955-2022 聚合物基复合材料多向层合板无开孔压缩试验方法(中英文版) Non-opening compression test method for multidirectional laminates of polymer matrix composites |
|||
GB/T 42089-2022 防止儿童开启包装 非药品用不可再封口包装的要求与试验方法(中英文版) Child-resistant packaging - Requirements and test methods for non-reclosable packaging for non-drug products |
|||
GB/T 42261-2022 金属及其他无机覆盖层 温度梯度下热障涂层热循环试验方法(中英文版) Metal and other inorganic coatings - thermal cycle test method for thermal barrier coatings under temperature gradient |
|||
GB/T 13477.23-2022 建筑密封材料试验方法 第23部分:人工加速气候老化下拉伸-压缩循环后耐久性的测定(中英文版) Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering |
|||
GB/T 13477.22-2022 建筑密封材料试验方法 第22部分:固化特性的测定(中英文版) Test methods for building sealing materials - Part 22: Determination of curing characteristics |
|||
GB/T 1927.21-2022 无疵小试样木材物理力学性质试验方法 第21部分:握钉力测定(中英文版) Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force |
|||
GB/T 30310-2022 浸胶帘线、纱线和线绳附胶量测定的试验方法(中英文版) Test method for determination of the amount of glue attached to dipped cords, yarns and cords |
|||
GB/T 41954-2022 色漆和清漆 内墙涂层现场质量评定试验方法(中英文版) Paints and varnishes - Test method for in situ quality assessment of interior wall coatings |
|||
GB/T 7994.3-2022 搪玻璃设备试验方法 第3部分:耐机械冲击枪击试验(中英文版) Test methods for glass-lined equipment - Part 3: Mechanical shock resistance gunshot test |
|||
GB/T 42222-2022 玻璃仪器 光学均匀性测试方法与分级(中英文版) Glass instruments - Test methods and classification for optical uniformity |
|||
GB/T 9651-2022 单相异步电动机试验方法(中英文版) Test methods for single-phase asynchronous motors |
|||
GB/T 42140-2022 信息技术 云计算 云操作系统性能测试指标和度量方法(中英文版) Information technology; Cloud computing; Cloud operating system performance testing indicators and measurement methods |
|||
GB/T 8128-2022 单相串励电动机试验方法(中英文版) Test methods for single-phase series-excited motors |
|||
GB/T 41951-2022 金属和合金的腐蚀 建筑用钢连接部件及钢构件耐腐蚀性能测试方法(中英文版) Corrosion of metals and alloys - Test method for corrosion resistance of steel connecting parts and steel components for construction |
|||
GB/T 24554-2022 燃料电池发动机性能试验方法(中英文版) Fuel cell engine performance test method |
|||
GB/T 24218.102-2022 纺织品 非织造布试验方法 第102部分:拉伸弹性的测定(中英文版) Textiles - Test methods for nonwovens - Part 102: Determination of tensile elasticity |
|||
GB/T 16850.1-2022 光放大器试验方法 第1部分:单波道光放大器功率和增益参数(中英文版) Test methods for optical amplifiers - Part 1: Power and gain parameters of single-channel optical amplifiers |
|||
GB/T 12782-2022 汽车采暖性能要求和试验方法(中英文版) Automobile heating performance requirements and test methods |
|||
GB/T 41966-2022 无缝钢管相控阵超声检测方法(中英文版) Phased array ultrasonic testing method for seamless steel pipe |
|||
GB/T 41633.3-2022 绝缘液体 酸值的测定 第3部分:非矿物绝缘油的试验方法(中英文版) Insulating liquids - Determination of acid value - Part 3: Test methods for non-mineral insulating oils |
|||
GB/T 42063-2022 锐器伤害保护 要求与试验方法 一次性使用皮下注射针、介入导管导引针和血样采集针的锐器伤害保护装置(中英文版) Sharps injury protection requirements and test methods - Sharps injury protection devices for disposable hypodermic needles, interventional catheter guide needles and blood sample collection needles |
|||
GB/T 42064-2022 普通照明用设备 闪烁特性 光闪烁计测试法(中英文版) Equipment for general lighting - Flicker characteristics - Optical scintillation meter test method |
|||
GB/T 21239-2022 纤维增强塑料层合板冲击后压缩性能试验方法(中英文版) Test method for compressive properties of fiber reinforced plastic laminates after impact |
|||
GB/T 41872-2022 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法(中英文版) Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method |
|||
GB/T 41755-2022 酸性环境中管线钢管开裂敏感性试验 全环试样椭圆变形法(中英文版) Cracking susceptibility test of pipeline steel pipe in acidic environment-full ring specimen ellipse deformation method |
|||
GB/T 41737-2022 铝基复合材料 碳化硅体积分数试验方法 溶解法(中英文版) Aluminum matrix composites - Test method for volume fraction of silicon carbide - Dissolution method |
|||
GB/T 14233.1-2022 医用输液、输血、注射器具检验方法 第1部分:化学分析方法(中英文版) Test methods for medical infusion, blood transfusion and injection equipment - Part 1: Chemical analysis methods |
|||
GB/T 41797-2022 驾驶员注意力监测系统性能要求及试验方法(中英文版) Performance requirements and test methods of driver attention monitoring system |
|||
GB/T 3903.29-2022 鞋类 外底试验方法 剖层撕裂强度和层间剥离强度(中英文版) Footwear - Test methods for outsoles - Split tear strength and interlaminar peel strength |
|||
GB/T 41760-2022 电气石自发极化性能测试方法(中英文版) Test method for spontaneous polarization performance of tourmaline |
|||
GB/T 41793-2022 人造革合成革试验方法 潜在酚黄变的测定(中英文版) Test method for artificial leather and synthetic leather - Determination of potential phenolic yellowing |
|||
GB/T 12085.23-2022 光学和光子学 环境试验方法 第23部分:低压与低温、大气温度、高温或湿热综合试验(中英文版) Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat |
|||
GB/T 42025-2022 智能制造 射频识别系统 超高频RFID系统性能测试方法(中英文版) Intelligent manufacturing-Radio frequency identification system-UHF RFID system performance test method |
|||
GB/T 18386.2-2022 电动汽车能量消耗量和续驶里程试验方法 第2部分:重型商用车辆(中英文版) Test methods for energy consumption and driving range of electric vehicles - Part 2: Heavy commercial vehicles |
|||
GB/T 41796-2022 商用车辆车道保持辅助系统性能要求及试验方法(中英文版) Performance requirements and test methods for commercial vehicle lane keeping assist system |
|||
GB/T 29268.6-2022 信息技术 生物特征识别性能测试和报告 第6部分:运行评价的测试方法(中英文版) Information technology - Biometric recognition performance testing and reporting - Part 6: Test methods for operational evaluation |
|||
GB/T 41813.2-2022 信息技术 智能语音交互测试方法 第2部分:语义理解(中英文版) Information technology—Test methods for intelligent voice interaction—Part 2: Semantic understanding |
|||
GB/T 41813.1-2022 信息技术 智能语音交互测试方法 第1部分:语音识别(中英文版) Information technology—Test methods for intelligent voice interaction—Part 1: Speech recognition |
|||
GB/T 3903.8-2022 鞋类 内底试验方法 层间剥离强度(中英文版) Footwear - Test methods for insoles - Peel strength between layers |
|||
GB/T 32877-2022 变频器供电交流电动机确定损耗和效率的特定试验方法(中英文版) Specific test methods for determining losses and efficiency of frequency converter-fed a.c. motors |
|||
GB/T 38265.8-2022 软钎剂试验方法 第8部分:锌含量的测定(中英文版) Test methods for soldering fluxes - Part 8: Determination of zinc content |
|||
GB/Z 13672-2022 齿轮胶合承载能力试验方法(中英文版) Test method for bearing capacity of gear bonding |
|||
GB/T 3658-2022 软磁金属材料和粉末冶金材料20Hz~100kHz频率范围磁性能的环形试样测量方法(中英文版) Ring test method for magnetic properties of soft magnetic metal materials and powder metallurgy materials in the frequency range of 20Hz to 100kHz |
|||
GB/T 41753-2022 密封胶人工气候老化下拉压循环耐久性试验方法(中英文版) Test method for artificial weathering pull-down compression cycle durability of sealants |
|||
GB/T 21396-2022 鞋类 成鞋试验方法 帮底粘合强度(中英文版) Footwear - Test methods for finished shoes - Adhesive strength of upper and sole |
|||
GB/T 13789-2022 用单片测试仪测量电工钢带(片)磁性能的方法(中英文版) Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester |
|||
GB/T 26957-2022 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法(中英文版) Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints |
|||
GB/T 38265.6-2022 软钎剂试验方法 第6部分:卤化物(不包括氟化物)含量的测定(中英文版) Test methods for soldering fluxes - Part 6: Determination of halide (excluding fluoride) content |
|||
GB/T 38265.9-2022 软钎剂试验方法 第9部分:氨含量的测定(中英文版) Test methods for soldering fluxes - Part 9: Determination of ammonia content |
|||
GB/T 38265.3-2022 软钎剂试验方法 第3部分:酸值的测定 电位滴定法和目视滴定法(中英文版) Test methods for soldering fluxes - Part 3: Determination of acid value - Potentiometric and visual titration |
|||
GB/T 38265.17-2022 软钎剂试验方法 第17部分:钎剂残留物的表面绝缘电阻梳刷试验和电化学迁移试验(中英文版) Soldering flux test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test for flux residues |
|||
GB/T 20568-2022 金属材料 管环液压试验方法(中英文版) Metallic materials - Hydraulic test method for pipe rings |
|||
GB/T 41890.1-2022 船舶与海上技术 船舶设计过程中螺旋桨空化噪声模型试验方法 第1部分:声源级评估(中英文版) Ships and marine technology—Model test methods for propeller cavitation noise during ship design—Part 1: Sound source level assessment |
|||
GB/T 5211.14-2021 颜料和体质颜料通用试验方法 第14部分:筛余物的测定 机械冲洗法(中英文版) General methods of test for pigments and extenders—Part 14: Determination of residue on sieve—Mechanical flushing procedure |
|||
GB/T 15078-2021 贵金属电触点材料接触电阻的测量方法(中英文版) Testing method for contact resistance of precious metals electrical contact materials |
|||
GB/T 20081.3-2021 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法(中英文版) Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
|||
GB/T 1425-2021 贵金属及其合金熔化温度范围的测定 热分析试验方法(中英文版) Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis |
|||
GB/T 2567-2021 树脂浇铸体性能试验方法(中英文版) Test methods for properties of resin casting body |
|||
GB/T 4214.14-2021 家用和类似用途电器噪声测试方法 电冰箱、冷冻食品储藏箱和食品冷冻箱的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for refrigerators, frozen-food storage cabinets and food freezers |
|||
GB/T 12639-2021 地球同步轨道通信卫星有效载荷在轨测试方法(中英文版) Methods of in-orbit testing for GEO communication satellite payload performance |
|||
GB/T 40467-2021 畜禽肉品质检测 近红外法通则(中英文版) Livestock and poultry meat quality testing—Guideline for near-infrared spectroscopy method |
|||
GB/T 4214.13-2021 家用和类似用途电器噪声测试方法 吸油烟机及其他烹饪烟气吸排装置的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for range hoods and other cooking fume extractors |
|||
GB/T 40512-2021 汽车整车大气暴露试验方法(中英文版) Test method of exposure to weathering for motor vehicle |
|||
GB/T 20485.32-2021 振动与冲击传感器校准方法 第32部分:谐振测试 用冲击激励测试加速度计的频率和相位响应(中英文版) Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation |
|||
GB/T 40428-2021 电动汽车传导充电电磁兼容性要求和试验方法(中英文版) Electromagnetic compatibility requirements and test methods of conductive charging for electric vehicles |
|||
GB/T 40406-2021 炭素材料压缩静态弹性模量和泊松比测定方法(中英文版) Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression |
|||
GB/T 40400-2021 建筑窗饰产品 防勒试验方法(中英文版) Window decoration for building—Test methods of protection from strangulation |
|||
GB/T 40345-2021 植物保护机械 确定可排放液体体积及浓度的试验方法(中英文版) Crop protection equipment—Test method for the determination of drainable volume and its concentration |
|||
GB/T 40293-2021 红外硫系光学薄膜折射率测试方法(中英文版) Test method for refractive index of infrared optical chalcogenide films |
|||
GB/T 20829-2021 船舶固定式气溶胶灭火系统性能要求和试验方法(中英文版) Performance requirements and test method of fixed aerosol fire-extinguishing systems for ships |
|||
GB/T 20485.43-2021 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准(中英文版) Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation |
|||
GB/T 19216.2-2021 在火焰条件下电缆或光缆的线路完整性试验 第2部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not |
|||
GB/T 19216.3-2021 在火焰条件下电缆或光缆的线路完整性试验 第3部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure |
|||
GB/T 1551-2021 硅单晶电阻率的测定 直排四探针法和直流两探针法(中英文版) Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method |
|||
GB/T 8243.12-2021 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
|||
GB/T 9966.11-2021 天然石材试验方法 第11部分:激冷激热加速老化强度测定(中英文版) Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock |
|||
GB/T 12703.1-2021 纺织品 静电性能试验方法 第1部分:电晕充电法(中英文版) Textiles - Test methods for electrostatic propensity - Part 1: Test method using corona charging |
|||
GB/T 9966.9-2021 天然石材试验方法 第9部分:通过测量共振基本频率测定动力弹性模数(中英文版) Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency |
|||
GB/T 19216.1-2021 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed |
|||
GB/T 10066.32-2021 电热和电磁处理装置的试验方法 第32部分:感应透热装置(中英文版) Test methods for electroheating and electromagnetic processing installations-Part 32:Induction through-heating installations |
|||
GB/T 14230-2021 齿轮弯曲疲劳强度试验方法(中英文版) Test method of tooth bending strength for gear load capacity |
|||
GB/T 15972.47-2021 光纤试验方法规范 第47部分:传输特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss |
|||
GB/T 40101-2021 压水堆核燃料组件和相关组件用不锈钢棒、板、锻件超声波检测方法(中英文版) Ultrasonic testing method for stainless steel bars,plates and forgings of PWR nuclear fuel assembly and associated assembly |
|||
GB/T 40111-2021 石油产品中氟、氯和硫含量的测定 燃烧-离子色谱法(中英文版) Standard test method for fluorine,chlorine and sulfur in petroleum products—Combustion-ion chromatography |
|||
GB/T 40237-2021 泡沫塑料着火性试验方法 电焊火花法(中英文版) Test method for ignitability of foamed plastic—Welding spark method |
|||
GB/T 40260-2021 高分子膜材料气体渗透性能测试方法(中英文版) Test method for determining gas permeability of polymer membrane materials |
|||
GB/T 40200-2021 工业有机废气净化装置性能测定方法(中英文版) Method of testing the performance of equipment for industrial organic waste gas purification |
|||
GB/T 40286-2021 低温双循环余热回收利用装置性能测试方法(中英文版) The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization |
|||
GB/T 9966.13-2021 天然石材试验方法 第13部分:毛细吸水系数的测定(中英文版) Test methods for natural stone—Part 13:Determination of water absorption coefficient by capillarity |
|||
GB/T 12703.2-2021 纺织品 静电性能试验方法 第2部分:手动摩擦法(中英文版) Textiles - Test methods for electrostatic propensity - Part 2: Test method using manual friction |
|||
GB/T 9966.14-2021 天然石材试验方法 第14部分:耐断裂能量的测定(中英文版) Test methods for natural stone-Part 14:Determination of rupture energy |
|||
GB/T 9966.12-2021 天然石材试验方法 第12部分:静态弹性模数的测定(中英文版) Test methods for natural stone-Part 12:Determination of static elastic modulus |
|||
GB/T 9966.15-2021 天然石材试验方法 第15部分:耐盐雾老化强度测定(中英文版) Test methods for natural stone- Part 15:Determination of resistance ageing by salt mist |
|||
GB/T 9966.16-2021 天然石材试验方法 第16部分:线性热膨胀系数的测定(中英文版) Test methods for natural stone- Part 16:Determination of linear thermal expansion coefficient |
|||
GB/T 9966.18-2021 天然石材试验方法 第18部分:岩相分析(中英文版) Test methods for natural stone-Part 18:Petrographic examination |
|||
GB/T 25217.8-2021 冲击地压测定、监测与防治方法 第8部分:电磁辐射监测方法(中英文版) Methods for test,monitoring and prevention of rock burst-Part 8:Monitoring method of electromagnetic radiation |
|||
GB/T 39969-2021 建筑用通风百叶窗通风及防雨性能检测方法(中英文版) Test method of ventilation and rain resistance performance for ventilation louvers of building |
|||
GB/T 40014-2021 双臂工业机器人 性能及其试验方法(中英文版) Dual arm industrial robots—Performance and related test methods |
|||
GB/T 9966.17-2021 天然石材试验方法 第17部分:盐结晶强度的测定(中英文版) Test methods for natural stone-Part 17:Determination of resistance to salt crystallization |
|||
GB/T 9966.10-2021 天然石材试验方法 第10部分:挂件组合单元抗震性能的测定(中英文版) Test methods for natural stone-Part 10:Determination of resistance to shaking for individual stone anchoragest |
|||
GB/T 5095.2502-2021 电子设备用机电元件 基本试验规程及测量方法 第25-2部分:试验25b:衰减(插入损耗)(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-2: Test 25b: Attenuation (insertion loss) |
|||
GB/T 39828-2021 陶瓷厚涂层的高温弹性模量试验方法(中英文版) Test method for determining elastic modulus of thick ceramic coating at elevated temperature |
|||
GB/T 3296-2021 日用瓷器透光度测定方法(中英文版) Test method for translucency of daily-use porcelain |
|||
GB/T 39796-2021 动车组玻璃隔声性能试验方法(中英文版) Test method for airbone sound insulating properties of glass used on multipe units |
|||
GB/T 39794.1-2021 金属屋面抗风掀性能检测方法 第1部分:静态压力法(中英文版) Test method for wind uplift resistance of metal roof -- Part 1: Static pressure method |
|||
GB/T 39788-2021 系统与软件工程 性能测试方法(中英文版) System and software engineering—Performance testing method |
|||
GB/T 15914-2021 蒸汽加热设备节能监测方法(中英文版) Monitoring and testing method for energy saving of steam heating equipments |
|||
GB/T 5095.2507-2021 电子设备用机电元件 基本试验规程及测量方法 第25-7部分:试验25g:阻抗、反射系数和电压驻波比(VSWR)(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) |
|||
GB/T 5095.2505-2021 电子设备用机电元件 基本试验规程及测量方法 第25-5部分:试验25e:回波损耗(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-5:Test 25e: Return loss |
|||
GB/T 5095.2503-2021 电子设备用机电元件 基本试验规程及测量方法 第25-3部分:试验25c:上升时间衰减(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation |
|||
GB/T 5095.2501-2021 电子设备用机电元件 基本试验规程及测量方法 第25-1部分:试验25a:串扰比(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio |
|||
GB/T 5095.2307-2021 电子设备用机电元件 基本试验规程及测量方法 第23-7部分:屏蔽和滤波试验 试验23g:连接器的有效转移阻抗(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors |
|||
GB/T 5095.2304-2021 电子设备用机电元件 基本试验规程及测量方法 第23-4部分:屏蔽和滤波试验 试验23d:时域内传输线的反射(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain |
|||
GB/T 5095.2303-2021 电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method |
|||
GB/T 39838-2021 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 终端到集群核心网接口(中英文版) LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between UE and trunking core network |
|||
GB/T 5095.2504-2021 电子设备用机电元件 基本试验规程及测量方法 第25-4部分:试验25d:传输时延(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay |
|||
GB/T 39933-2021 滚塑成型 低温冲击试验(中英文版) Rotational moulding—Test method for low temperature impact |
|||
GB/T 39814-2021 超薄玻璃抗冲击强度试验方法 落球冲击法(中英文版) Test method for impact strength of ultrathin glass—Ball drop method |
|||
GB/T 39840-2021 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 空中接口(中英文版) LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Air interface |
|||
GB/T 39794.2-2021 金属屋面抗风掀性能检测方法 第2部分:动态压力法(中英文版) Test method for wind uplift resistance of mental roof—Part 2:Dynamic pressure method |
|||
GB/T 39748.9-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分:称重法测定密度(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density |
|||
GB/T 39748.8-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分:称重法测定流量(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate |
|||
GB/T 39748.7-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分:称重法测定压力作用下的吸液量(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure |
|||
GB/T 39748.6-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
|||
GB/T 39864-2021 锰酸锂电化学性能测试 首次放电比容量及首次充放电效率测试方法(中英文版) Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency |
|||
GB/T 39748.10-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分:电位滴定法测定可萃取聚合物量(中英文版) Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration |
|||
GB/T 4214.8-2021 家用和类似用途电器噪声测试方法 电灶、烤箱、烤架、微波炉及其组合器具的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these |
|||
GB/T 39939-2021 家具部件中挥发性有机化合物 现场快速检测方法(中英文版) Volatile organic compounds in furniture components—Test method for the rapid determination in the field |
|||
GB/T 39938-2021 室内电取暖 地暖 性能特征 定义、测试方法、尺寸和公式符号(中英文版) Electric room heating—Underfloor heating—Performance characteristics—Definitions, method of testing, sizing and formula symbols |
|||
GB/T 39901-2021 乘用车自动紧急制动系统(AEBS)性能要求及试验方法(中英文版) Performance requirements and test methods for advanced emergency braking system (AEBS) of passenger cars |
|||
GB/T 39748.11-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分:可吸入颗粒含量的测定(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles |
|||
GB/T 39849-2021 无损检测仪器 超声衍射声时检测仪 性能测试方法(中英文版) Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests |
|||
GB/T 39846-2021 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 集群核心网到调度台接口(中英文版) LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between trunking core network and dispach console |
|||
GB/T 13277.7-2021 压缩空气? 第7部分:活性微生物含量测量方法(中英文版) Compressed air -- Part 7:Test method for viable microbiological contaminant content |
|||
GB/T 18978.304-2021 人-系统交互工效学 第304部分:电子视觉显示器的用户绩效测试方法(中英文版) Ergonomics of human-system interaction—Part 304: User performance test methods for electronic visual displays |
|||
GB/T 41134.2-2021 电驱动工业车辆用燃料电池发电系统 第2部分:性能试验方法(中英文版) Fuel cell power systems for industrial electric trucks -- Part 2: Performance test methods |
|||
GB/T 1927.2-2021 无疵小试样木材物理力学性质试验方法 第2部分:取样方法和一般要求(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements |
|||
GB/T 1927.3-2021 无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood |
|||
GB/T 1927.4-2021 无疵小试样木材物理力学性质试验方法 第4部分:含水率测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content |
|||
GB/T 1927.6-2021 无疵小试样木材物理力学性质试验方法 第6部分:干缩性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage |
|||
GB/T 1927.7-2021 无疵小试样木材物理力学性质试验方法 第7部分:吸水性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption |
|||
GB/T 13277.6-2021 压缩空气 第6部分:气态污染物含量测量方法(中英文版) Compressed air -- Part 6:Test methods for gaseous contaminant content |
|||
GB/T 41170.2-2021 造口辅助器具的皮肤保护用品 试验方法 第2部分:耐湿完整性和黏合强度(中英文版) Skin barrier for ostomy aids -- Test methods -- Part 2: Wet integrity and adhesive strength |
|||
GB/T 1927.5-2021 无疵小试样木材物理力学性质试验方法 第5部分:密度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density |
找到:1007條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |