中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 6113.104-2021 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements |
|||
GB/T 14914.3-2021 海洋观测规范 第 3 部分:浮标潜标观测(中英文版) The specification for marine observation -- Part 3: Surface and subsurface buoy-based observation |
|||
GB/T 40951-2021 城市客运枢纽运营安全管理规范(中英文版) Specification for urban passenger transfer hub operation safety management |
|||
GB/T 40973-2021 针灸门诊基本服务规范(中英文版) Basic service specification for acupuncture and moxibustion clinic |
|||
GB/T 40817.1-2021 核电主泵电机技术条件 第1部分:轴封泵异步电机(中英文版) Specification for nuclear power reactor coolant pump motor—Part 1:Asynchronous motor for shaft sealing pump |
|||
GB/T 40423-2021 健康信息学 健康体检基本内容与格式规范(中英文版) Health informatics—Basic contents and format specification of health examination |
|||
GB/T 15972.49-2021 光纤试验方法规范 第49部分:传输特性的测量方法和试验程序 微分模时延(中英文版) Specifications for optical fibre test methods—Part 49: Measurement methods and test procedures for transmission characteristics—Differential mode delay |
|||
GB/T 40583-2021 生态设计产品评价技术规范 电池产品(中英文版) Technical specification for eco-design product assessment—Battery |
|||
GB/T 15972.32-2021 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods—Part 32: Measurement methods and test procedures for mechanical characteristics—Coating strippability |
|||
GB/T 25915.12-2021 洁净室及相关受控环境 第12部分:监测空气中纳米粒子浓度的技术要求(中英文版) Cleanrooms and associated controlled environments—Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration |
|||
GB/T 20115.1-2021 工业燃料加热装置基本技术条件 第1部分:通用部分(中英文版) Basic specifications for industrial fuel fired installations—Part 1:General |
|||
GB/T 40661-2021 工频磁场测量仪校准规范(中英文版) Calibration specification of measurement instrument for power frequency magnetic field |
|||
GB/T 40619-2021 基于雷电定位系统的雷电临近预警技术规范(中英文版) Technical specification for lightning nowcasting and warning based on lightning location system |
|||
GB/T 40817.2-2021 核电主泵电机技术条件 第2部分:屏蔽泵异步电机(中英文版) Specification for nuclear power reactor coolant pump motor—Part 2:Asynchronous motor for canned motor pump |
|||
GB/T 40863-2021 生态设计产品评价技术规范? 电动机产品(中英文版) Assessment technical specification for eco-design product -- Motor products |
|||
GB/T 40662-2021 废铅蓄电池再生处理技术规范(中英文版) Technical specification for recycling and treatment of waste lead batteries |
|||
GB/T 22271.1-2021 塑料 聚甲醛(POM)模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification |
|||
GB 40880-2021 煤矿瓦斯等级鉴定规范(中英文版) Specification for coal mine gas classification identification |
|||
GB/T 40774-2021 生态设计产品评价技术规范 办公设备系列产品(中英文版) Technical specification for eco-design product assessment—Office equipment |
|||
GB/T 40775-2021 生态设计产品评价技术规范 灯具(中英文版) Technical specification for eco-design product assessment—Luminaries |
|||
GB/T 40800-2021 铸钢件焊接工艺评定规范(中英文版) Specification and qualification of welding procedures for production welding of steel castings |
|||
GB/T 40702-2021 油气管道地质灾害防护技术规范(中英文版) Specification for geohazard prevention of oil and gas pipelines |
|||
GB/T 40810.2-2021 产品几何技术规范(GPS) 生产过程在线测量 第2部分:几何特征(形位)的在线检测与验证(中英文版) Geometrical product specifications (GPS)—Online measurement in process—Part 2:Online verifications of geometric features(form and position) |
|||
GB/T 40727-2021 再制造 机械产品装配技术规范(中英文版) Remanufacturing—Technological specifications for assembly of mechanical products |
|||
GB/T 40738-2021 熔模铸造 硅溶胶快速制壳工艺规范(中英文版) Investment casting—Technical specification for rapid shell build with colloidal silica binder |
|||
GB/T 40585-2021 电网运行风险监测、评估及可视化技术规范(中英文版) Technical specifications for monitoring, assessment and visualization of power grid operational risk |
|||
GB/T 21969-2021 YGP系列辊道用变频调速三相异步电动机 技术条件(中英文版) YGP series variable-frequency adjustable-speed three-phase induction motors for roll table application—Technical specification |
|||
GB/T 21973-2021 YZR3系列起重及冶金用绕线转子三相异步电动机 技术条件(中英文版) YZR3 series wound-rotor three-phase induction motors for crane and metallurgical applications—Technical specification |
|||
GB/T 40742.5-2021 产品几何技术规范(GPS) 几何精度的检测与验证 第5部分:几何特征检测与验证中测量不确定度的评估(中英文版) Geometrical product specifications (GPS)—Geometrical precisionverification—Part 5:Estimation of uncertainty of measurement for geometrical characteristics verification |
|||
GB/T 40579-2021 生态设计产品评价技术规范 通信系统及设备(中英文版) Technical specification for eco-design product assessment—Communication system and equipment |
|||
GB/T 40809-2021 铸造铝合金 半固态流变压铸成形工艺规范(中英文版) Casting aluminum alloys—Process specification for semisolid rheo-diecasting forming |
|||
GB/T 39511-2020 保健调理按摩技术操作规范(中英文版) Practice specification for healthcare conditioning massage technique |
|||
GB/T 39518-2020 产品几何技术规范(GPS) 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南(中英文版) Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
|||
GB/T 39171-2020 废塑料回收技术规范(中英文版) Technical specification for waste plastics recycling |
|||
GB/T 39196-2020 废玻璃回收技术规范(中英文版) Technical specification for waste glass recycling |
|||
GB/T 39201-2020 高铝粉煤灰提取氧化铝技术规范(中英文版) Technical specifications for extraction of aluminium oxide from high-alumina fly ash |
|||
GB/T 34077.5-2020 基于云计算的电子政务公共平台管理规范 第5部分:技术服务体系(中英文版) Management specification of electronic government common platform based on cloud computing—Part 5:Technical service system |
|||
GB/T 38865-2020 干部网络培训 专题班规范(中英文版) Online training for leadership—Theme-based training project specification |
|||
GB/T 39053-2020 跨境电子商务平台商家信用评价规范(中英文版) Specification of credit assessment for merchants on cross-border E-commerce platform |
|||
GB/T 39047-2020 政务服务平台基本功能规范(中英文版) Basic functional specification of government service platform |
|||
GB/T 39023-2020 书写和记号工具 降低窒息风险的笔套规范(中英文版) Writing and marking instruments—Specification for caps to reduce the risk of asphyxiation |
|||
GB/T 38926-2020 废旧纺织品回收技术规范(中英文版) Technical specification for collection of textile waste |
|||
GB/T 38757-2020 设施农业小气候观测规范 日光温室和塑料大棚(中英文版) Specifications for facility agricultural microclimate observation—Heliogreenhouse and plastic tunnel |
|||
GB/T 1800.2-2020 产品几何技术规范(GPS) 线性尺寸公差ISO代号体系 第2部分:标准公差带代号和孔、轴的极限偏差表(中英文版) Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
|||
GB/T 1800.1-2020 产品几何技术规范(GPS) 线性尺寸公差ISO代号体系 第1部分:公差、偏差和配合的基础(中英文版) Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits |
|||
GB/T 38585-2020 城镇供热直埋管道接头保温技术条件(中英文版) Technical specification of joint assembling for directly buried insulated pipeline of urban heating |
|||
GB/T 38695-2020 城市轨道交通无砟轨道技术条件(中英文版) Technical specification for ballastless track of urban rail transit |
|||
GB/T 28575-2020 YE3系列(IP55)三相异步电动机技术条件(机座号63~355)(中英文版) Specification for YE3 series (IP55) three-phase induction motors (Frame size 63~355) |
|||
GB/T 16857.901-2020 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第901部分:配置多影像探测系统的坐标测量机(中英文版) Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system |
|||
GB/T 38463-2020 超洁净塑料瓶灌装设备通用技术要求(中英文版) General specification for ultra-clean plastic bottle filling machine |
|||
GB/T 37055.4-2020 国家物品编码与基础信息通用规范 生产资料 第4部分:沥青(中英文版) National article numbering and basic information specification—Means of production—Part 4: Asphalt |
|||
GB/Z 38546-2020 精准扶贫 人造板(刨花板)产业项目运营管理规范(中英文版) Targeted poverty alleviation—Specification for operation management of wood-based panel (particleboard) project |
|||
GB/T 38556-2020 信息安全技术 动态口令密码应用技术规范(中英文版) Information security technology—Technical specifications for one-time-password cryptographic application |
|||
GB/T 38582-2020 森林生态系统服务功能评估规范(中英文版) Specifications for assessment of forest ecosystem services |
|||
GB/T 37055.2-2020 国家物品编码与基础信息通用规范 生产资料 第2部分:燃润料(中英文版) National articles numbering and basic information specification—Means of production—Part 2:Fuels and lubricants |
|||
GB/T 39739-2020 国家公园考核评价规范(中英文版) Specification for assessment of the national park |
|||
GB/T 39736-2020 国家公园总体规划技术规范(中英文版) Technical specification for the national park master plan |
|||
GB/T 39578-2020 基于惯性导航的应急定位系统规范(中英文版) Specification for emergency location system based on inertial navigation |
|||
GB/T 24635.4-2020 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第4部分:应用仿真技术评估特定任务的测量不确定度(中英文版) Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation |
|||
GB/T 39614-2020 卫星导航定位基准站网质量评价规范(中英文版) Quality assessment specifications for reference stations using global navigation satellite system |
|||
GB/T 39616-2020 卫星导航定位基准站网络实时动态测量(RTK) 规范(中英文版) Specification for network real-time kinematic(RTK) surveys based on the reference stations using global navigation satellite system |
|||
GB/T 39697.1-2020 橡胶或塑料包覆辊 规范 第1部分:硬度要求(中英文版) Rubber or plastics covered rollers—Specifications—Part 1: Requirements for hardness |
|||
GB/T 24635.1-2020 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第1部分:概要和计量特性(中英文版) Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics |
|||
GB/T 18779.6-2020 产品几何技术规范(GPS) 工件与测量设备的测量检验 第6部分:仪器和工件接受/拒收的通用判定规则(中英文版) Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
|||
GB/T 39627-2020 智能水电厂智能测控装置技术规范(中英文版) Technical specification of intelligent measurement and control devices for smart hydropower plant |
|||
GB/T 39690.1-2020 塑料 源自柔性和刚性消费品包装的聚丙烯(PP)和聚乙烯(PE)回收混合物 第1部分: 命名系统和分类基础(中英文版) Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification |
|||
GB/T 39723-2020 北斗地基增强系统通信网络系统技术规范(中英文版) Technical specification for communication network system of BeiDou ground-based augmentation system |
|||
GB/T 6113.203-2020 无线电骚扰和抗扰度测量设备和测量方法规范 第2-3部分:无线电骚扰和抗扰度测量方法 辐射骚扰测量(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3: Methods of measurement of disturbances and immunity—Radiated disturbance measurements |
|||
GB/T 39415.2-2020 包装袋 特征性能规范方法 第2部分:热塑性软质薄膜袋(中英文版) Packaging sacks—Method of specifications for characteristics—Part 2: Sacks made from thermoplastic flexible film |
|||
GB/T 39311-2020 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范(中英文版) Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
|||
GB/T 27424-2020 合格评定 非可溯源生物质控品质量控制规范(中英文版) Conformity assessment—Specification for biological quality control materials without metrological traceability |
|||
GB/T 39309-2020 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范(中英文版) Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification |
|||
GB/T 39308-2020 难降解有机废水深度处理技术规范(中英文版) Technical specification for refractory organic wastewater advanced treatment |
|||
GB/T 39248-2020 输送液化石油气和液化天然气用热塑性塑料多层(非硫化)软管及软管组合件 规范(中英文版) Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification |
|||
GB/T 39313-2020 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范(中英文版) Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification |
|||
GB/T 38927-2020 焦炉煤气制取甲醇技术规范(中英文版) Technical specification for producing methanol from coke-oven gas |
|||
GB/T 39441-2020 公共信用信息分类与编码规范(中英文版) Classification and coding specifications of public credit information |
|||
GB/Z 6113.403-2020 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分:不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products |
|||
GB/T 39303-2020 废水处理系统微生物样品前处理通用技术规范(中英文版) General technical specification for pre-treatment of microorganism samples in wastewater treatment system |
|||
GB/T 39432-2020 无损检测 超声检测 阶梯试块(中英文版) Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block |
|||
GB/T 39489-2020 全尾砂膏体充填技术规范(中英文版) Technical specification for the total tailings paste backfill |
|||
GB/T 39257-2020 绿色制造 制造企业绿色供应链管理 评价规范(中英文版) Green manufacturing—Green supply chain management in manufacturing enterprises—Specifications for assessment |
|||
GB/T 39406-2020 工业机器人可编程控制器软件开发平台程序的XML交互规范(中英文版) Specification of XML exchange of PLC-based software development platform for industrial robots |
|||
GB/T 21967-2020 YBZE、YBZSE系列起重用隔爆型电磁制动三相异步电动机 技术条件(中英文版) YBZE and YBZSE series flameproof electromagnetic braking three-phase induction motors for crane application—Technical specification |
|||
GB/T 21968-2020 YBZS系列起重用隔爆型双速三相异步电动机 技术条件(中英文版) YBZS series flameproof double-speed three-phase induction motors for crane application—Technical specification |
|||
GB/T 21971-2020 YZD系列起重用多速三相异步电动机 技术条件(中英文版) YZD series multi-speed three-phase induction motors for crane application—Technical specification |
|||
GB/T 39328-2020 增材制造 塑料材料挤出成形工艺规范(中英文版) Additive manufacturing—Specification for material extrusion process of plastic materials |
|||
GB/T 39330-2020 钛合金铸件表面处理技术规范(中英文版) Technical specification for surface treatment of titanium alloy castings |
|||
GB/T 39357-2020 银耳栽培基地建设规范(中英文版) Specification for construction of cultivation base of white jelly fungus |
|||
GB/T 39327-2020 船用发动机湿式排气系统用橡胶和塑料软管 规范(中英文版) Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification |
|||
GB 38600-2019 养老机构服务安全基本规范(中英文版) Basic specification of service safety for senior care organization |
|||
GB/T 37672-2019 再制造 等离子熔覆技术规范(中英文版) Remanufacturing—Technical specification for plasma cladding |
|||
GB/Z 6113.3-2019 无线电骚扰和抗扰度测量设备和测量方法规范 第3部分:无线电骚扰和抗扰度测量技术报告(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 3: CISPR technical reports |
|||
GB/T 38439-2019 室外照明干扰光测量规范(中英文版) Measuring specifications for methods to obtrusive light of outdoor lighting |
|||
GB/T 21412.10-2019 石油天然气工业 水下生产系统的设计和操作 第10部分:粘接性挠性管规格书(中英文版) Petroleum and natural gas industries—Design and operation of subsea production systems—Part 10: Specification for bonded flexible pipe |
|||
GB/T 37589-2019 钢制管道及管件内衬氟塑料耐蚀作业技术规范(中英文版) Technical specification for anticorrosion of steel pipe and fitting lining with fluoroplastics |
|||
GB/T 37387-2019 工业废磷酸的处理处置规范(中英文版) Treatment and disposal specification for waste phosphoric acid from industrial manufacture |
|||
GB/T 37715-2019 公安物联网基础平台与应用系统软件测试规范(中英文版) Specification for base platform and application system software testing of IoTPS |
|||
GB/T 10067.416-2019 电热和电磁处理装置基本技术条件 第416部分:多晶硅铸锭炉(中英文版) Basic specifications for electroheating and electromagnetic processing installations—Part 416: Polysilicon ingot furnace |
|||
GB/T 37536-2019 机动车检验机构检测设备期间核查规范(中英文版) Intermediate check specifications of measuring equipment for vehicle inspection body |
|||
GB/T 37333-2019 铁道客车及动车组无障碍设施通用技术条件(中英文版) General technical specification of accessible facilities for railway passenger cars and multiple unit |
|||
GB/T 37689-2019 农业社会化服务 水产养殖病害防治服务规范(中英文版) Agricultural service—Specification for prevention and treatment service of aquaculture disease |
|||
GB/T 37463-2019 增材制造 塑料材料粉末床熔融工艺规范(中英文版) Additive manufacturing—Specification for powder bed fusion of plastic materials |
|||
GB/T 37281-2019 废铅酸蓄电池回收技术规范(中英文版) Technical specification for recycling waste lead acid battery |
|||
GB/T 18809-2019 空气离子测量仪通用规范(中英文版) General specification for air ion measuring instruments |
|||
GB/T 15329-2019 橡胶软管及软管组合件 油基或水基流体适用的织物增强液压型 规范(中英文版) Rubber hoses and hose assemblies—Textile-reinforced hydraulic types for oil-based or water-based fluids—Specification |
|||
GB/T 37293-2019 城市公共设施 电动汽车充换电设施运营管理服务规范(中英文版) Urban public facilities—Specification for operation management and service of electric vehicle charging/battery swap infrastructure |
|||
GB/T 5599-2019 机车车辆动力学性能评定及试验鉴定规范(中英文版) Specification for dynamic performance assessment and testing verification of rolling stock |
|||
GB/T 10067.1-2019 电热和电磁处理装置基本技术条件 第1部分:通用部分(中英文版) Basic specifications for electroheating and electromagnetic processing installations—Part 1: General |
|||
GB/T 38273.1-2019 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分:命名系统和分类基础(中英文版) Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification |
|||
GB/T 38352-2019 热塑性弹性体 预混料牌号规范(中英文版) Thermoplastic elastomers—Designation and specification for premixture |
|||
GB/T 38351-2019 胶鞋、运动鞋制造过程中固体废弃物回收处理规范(中英文版) Specifications for recycling and disposal of solid waste from manufacturing process of rubber shoes and sports footwear |
|||
GB/T 38337-2019 超声波电动机及其驱动控制器通用技术条件 (中英文版) General specification for ultrasonic motor and driver |
|||
GB/T 38273.1-2019 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分:命名系统和分类基础(中英文版) Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification |
|||
GB/T 5599-2019 机车车辆动力学性能评定及试验鉴定规范(中英文版) Specification for dynamic performance assessment and testing verification of rolling stock |
|||
GB/T 37997-2019 输送烃类、溶剂和化学品用多层热塑性塑料(非硫化)软管及软管组合件 规范(中英文版) Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification |
|||
GB/T 37400.7-2019 重型机械通用技术条件 第7部分:铸钢件补焊(中英文版) Heavy mechanical general technical specification—Part 7:Repair welding for steel castings |
|||
GB/T 37935-2019 信息安全技术 可信计算规范 可信软件基(中英文版) Information security technology—Trusted computing specification—Trusted software base |
|||
GB/T 38337-2019 超声波电动机及其驱动控制器通用技术条件(中英文版) General specification for ultrasonic motor and driver |
|||
GB/T 22711-2019 三相永磁同步电动机技术条件(机座号 80~355)(中英文版) Specification for three-phase permanent magnet synchronous motors(frame size 80~355) |
|||
GB/T 37821-2019 废塑料再生利用技术规范(中英文版) Technical specifications for recycling of waste plastics |
|||
GB/T 37867-2019 运行核电厂安全生产标准化考核评级规范(中英文版) Assessment specification of work safety standardization for nuclear power plant in operation |
|||
GB/T 37893-2019 激光-电弧复合焊接推荐工艺方法(中英文版) Recommendation procedure specification for Laser-arc hybrid welding |
|||
GB/T 37914-2019 信用信息分类与编码规范(中英文版) Specifications of credit information classification and coding |
|||
GB/T 37916-2019 小型电动高压清洗机安全规范(中英文版) Safety specification for small electric high pressure cleaning/washer |
|||
GB/T 6346.2601-2018 电子设备用固定电容器 第26-1部分:空白详细规范 导电高分子固体电解质铝固定电容器 评定水平EZ(中英文版) Fixed capacitors for use in electronic equipment—Part 26-1:Blank detail specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte—Assessment level EZ |
|||
GB/T 36328-2018 信息技术 软件资产管理 标识规范(中英文版) Information technology—Software asset management—Identification specification |
|||
GB/T 29618.5232-2018 现场设备工具(FDT)接口规范 第5232部分:通用语言基础结构的通信实现 IEC 61784 CP3/4、CP3/5和CP3/6(中英文版) Field device tool (FDT) interface specification—Part 5232: Communication implementation for common language infrastructure—IEC 61784 CP 3/4、CP 3/5 and CP 3/6 |
|||
GB/T 29618.529-2018 现场设备工具(FDT)接口规范 第529部分:通用语言基础结构的通信实现 IEC 61784 CPF 9(中英文版) Field device tool (FDT) interface specification—Part 529: Communication implementation for common language infrastructure—IEC 61784 CPF 9 |
|||
GB/T 36742-2018 气象灾害防御重点单位气象安全保障规范(中英文版) Specifications for safeguard measures of the key units of meteorological disaster prevention |
|||
GB/T 29618.5215-2018 现场设备工具(FDT)接口规范 第5215部分:通用语言基础结构的通信实现 IEC 61784 CPF 15(中英文版) Field device tool (FDT) interface specification—Part 5215 : Communication implementation for common language infrastructure—IEC 61784 CPF 15 |
|||
GB/T 36699-2018 锅炉用液体和气体燃料燃烧器技术条件(中英文版) Specification for liquid fuels and gaseous fuels burners of boilers |
|||
GB/T 36683-2018 汽车售后服务评价规范(中英文版) Specification for assessment of automobile after-sales service |
|||
GB/T 36448-2018 集装箱式数据中心机房通用规范(中英文版) General specification for container data center infrastructure |
|||
GB/T 36324-2018 信息安全技术 工业控制系统信息安全分级规范(中英文版) Information security technology—Information security classification specifications of industrial control systems |
|||
GB/T 18240.2-2018 税控收款机 第2部分:税控IC卡规范(中英文版) Fiscal cash register—Part 2: Specification for fiscal IC card |
|||
GB/T 24843-2018 1000kV单相油浸式自耦电力变压器技术规范(中英文版) Technical specification of 1000 kV single phase oil-immersed auto-transformer |
|||
GB/T 36365-2018 信息技术 射频识别 800/900MHz无源标签通用规范(中英文版) Information technology—Radio frequency identification—General specifications for passive tag at 800/900MHz |
|||
GB/T 36373.1-2018 特种设备信息资源管理 数据元规范 第1部分:气瓶(中英文版) Special equipment information resource management—Specification of data element—Part 1:Gas cylinder |
|||
GB/T 22157-2018 声学 测量道路车辆和轮胎噪声的试验车道技术规范(中英文版) Acoustics—Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
|||
GB/T 36555.1-2018 智慧安居应用系统接口规范 第1部分:基于表述性状态转移(REST)技术接口(中英文版) Interface specification for application system of smart residing—Part 1: Interface based on REST |
|||
GB/T 35008-2018 串行NOR型快闪存储器接口规范(中英文版) Specification for serial NOR flash interface |
|||
GB/T 36732-2018 生态休闲养生(养老)基地建设和运营服务规范(中英文版) Specification for the construction and service of ecological recreation and health cultivation ( with elderly service) base |
|||
GB/T 36135-2018 移动水平式生活垃圾压缩机通用技术条件(中英文版) General technical specification for mobile horizontal municipal solid waste compactor |
|||
GB/T 6113.402-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分: 不确定度、统计学和限值建模 测量设备和设施的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-2:Uncertainties, statistics and limit modelling—Measurement instrumentation uncertainty |
|||
GB/Z 6113.401-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模 标准化EMC试验的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests |
|||
GB/T 36076-2018 自动作业仓储配送包装箱信息标识通用规范(中英文版) General specification for information identification of automatic warehousing and distribution packing-case |
|||
GB/T 36067-2018 信息与文献 引文数据库数据加工规则(中英文版) Information and documentation—Specification for data processing of citation databases |
|||
GB/T 29618.5231-2018 现场设备工具(FDT)接口规范 第5231部分:通用语言基础结构的通信实现 IEC 61784 CP3/1和CP3/2(中英文版) Field device tool (FDT) interface specification—Part 5231: Communication implementation for common language infrastructure—IEC 61784 CP 3/1 and CP 3/2 |
|||
GB/T 36571-2018 并联无功补偿节约电力电量测量和验证技术规范(中英文版) Technical specification for measurement and verification of electric energy and power savings for parallel reactive power compensation project |
找到:1001條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |