中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB/T 7308.1-2021 滑动轴承 有法兰或无法兰薄壁轴瓦 第1部分:公差、结构要素和检验方法（中英文版） Plain bearings—Thin-walled half bearings with or without flange—Part 1：Tolerances, design features and methods of test |
 |
|
|
|
GB/T 15914-2021 蒸汽加热设备节能监测方法（中英文版） Monitoring and testing method for energy saving of steam heating equipments |
|
|
|
|
GB/T 4214.9-2021 家用和类似用途电器噪声测试方法 风扇的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for fans |
|
|
|
|
GB/T 39788-2021 系统与软件工程 性能测试方法（中英文版） System and software engineering—Performance testing method |
|
|
|
|
GB/T 39901-2021 乘用车自动紧急制动系统（AEBS）性能要求及试验方法（中英文版） Performance requirements and test methods for advanced emergency braking system (AEBS) of passenger cars |
|
|
|
|
GB/T 39936-2021 深冷保冷用泡沫塑料（中英文版） Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods |
|
|
|
|
GB/T 39937-2021 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法（中英文版） Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods |
|
|
|
|
GB/T 39938-2021 室内电取暖 地暖 性能特征 定义、测试方法、尺寸和公式符号（中英文版） Electric room heating—Underfloor heating—Performance characteristics—Definitions, method of testing, sizing and formula symbols |
|
|
|
|
GB/T 4214.8-2021 家用和类似用途电器噪声测试方法 电灶、烤箱、烤架、微波炉及其组合器具的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these |
|
|
|
|
GB/T 39861-2021 锰酸锂电化学性能测试 放电平台容量比率及循环寿命测试方法（中英文版） Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life |
|
|
|
|
GB/T 1456-2021 夹层结构弯曲性能试验方法（中英文版） Test method for flexural properties of sandwich constructions |
|
|
|
|
GB/T 1927.7-2021 无疵小试样木材物理力学性质试验方法 第7部分：吸水性测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption |
|
|
|
|
GB/T 1927.6-2021 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage |
|
|
|
|
GB/T 1927.5-2021 无疵小试样木材物理力学性质试验方法 第5部分：密度测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density |
|
|
|
|
GB/T 1927.4-2021 无疵小试样木材物理力学性质试验方法 第4部分：含水率测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content |
|
|
|
|
GB/T 1927.3-2021 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood |
|
|
|
|
GB/T 1927.2-2021 无疵小试样木材物理力学性质试验方法 第2部分：取样方法和一般要求（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements |
|
|
|
|
GB/T 1927.1-2021 无疵小试样木材物理力学性质试验方法 第1部分：试材采集（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 1: Collection of sample tree |
|
|
|
|
GB/T 21437.3-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第3部分：对耦合到非电源线电瞬态的抗扰性（中英文版） Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
|
|
|
|
GB/T 1927.8-2021 无疵小试样木材物理力学性质试验方法 第8部分：湿胀性测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling |
|
|
|
|
GB/T 21437.1-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第1部分：定义和一般规定（中英文版） Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 1: Definitions and general considerations |
|
|
|
|
GB/T 1927.17-2021 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength |
|
|
|
|
GB/T 31723.413-2021 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法（中英文版） Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method |
|
|
|
|
GB/T 21437.2-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第2部分：沿电源线的电瞬态传导发射和抗扰性（中英文版） Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only |
|
|
|
|
GB/T 7991.3-2021 搪玻璃层试验方法 第3部分：耐温差急变性能的测定（中英文版） Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock |
|
|
|
|
GB/T 34273-2021 煤液化柴油十六烷指数计算法 四变量公式法（中英文版） Standard test method for calculated cetane index of coal liquefaction diesel—Four variable equetion |
|
|
|
|
GB/T 7991.1-2021 搪玻璃层试验方法 第1部分：耐碱性溶液腐蚀性能的测定（中英文版） Test method of viterous and porcelain enamels—Part 1：Determination of resistance to alkaline liquids |
|
|
|
|
GB/T 41105.3-2021 无损检测? X射线管电压的测量和评价 第3部分：能谱法（中英文版） Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method |
|
|
|
|
GB/T 41105.2-2021 无损检测? X射线管电压的测量和评价 第2部分：厚板滤波法稳定性核查（中英文版） Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method |
|
|
|
|
GB/T 1927.10-2021 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending |
|
|
|
|
GB/T 41105.1-2021 无损检测 X射线管电压的测量和评价 第1部分：分压法（中英文版） Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method |
|
|
|
|
GB/T 1927.9-2021 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength |
|
|
|
|
GB/T 1927.20-2021 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength |
|
|
|
|
GB/T 1927.19-2021 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness |
|
|
|
|
GB/T 1927.18-2021 无疵小试样木材物理力学性质试验方法 第18部分：抗冲击压痕测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation |
|
|
|
|
GB/T 1927.12-2021 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定（中英文版） Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain |
|
|
|
|
GB/T 41104.2-2021 实心和药芯软钎料丝? 规范和试验方法? 第2部分：钎剂含量的测定（中英文版） Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content |
|
|
|
|
GB/T 1037-2021 塑料薄膜与薄片水蒸气透过性能测定 杯式增重与减重法（中英文版） Test method for water vapor transmission of plastic film and sheet—Desiccant method and water method |
|
|
|
|
GB/T 40889.2-2021 助行器具支脚垫 要求和测试方法 第2部分：拐杖支脚垫耐久性（中英文版） Tips for assistive products for walking—Requirements and test methods—Part 2:Durability of tips for crutches |
|
|
|
|
GB/T 4214.10-2021 家用和类似用途电器噪声测试方法 确定和检验噪声明示值的程序（中英文版） Test method for noise of household and similar electrical appliances—Procedure for determining and verifying declared noise emission values |
|
|
|
|
GB/T 40925-2021 滑雪单板软靴束带固定器 要求和试验方法（中英文版） Snowboard strap bindings for soft boots—Requirements and test methods |
|
|
|
|
GB/T 40889.1-2021 助行器具支脚垫 要求和测试方法 第1部分：支脚垫摩擦力（中英文版） Tips for assistive products for walking -- Requirements and test methods -- Part 1: Friction of tips |
|
|
|
|
GB/T 386-2021 柴油十六烷值测定法（中英文版） Standard test method for cetane number of diesel fuel oil |
|
|
|
|
GB/T 40686-2021 便携式宽带应急通信系统总体技术要求和测试方法（中英文版） General technical requirements and test method of portable broadband emergency communication system |
|
|
|
|
GB/T 11809-2021 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验（中英文版） Test method of weld of fuel rod for PWR—Metallographic examination and radiographic testing |
|
|
|
|
GB/T 40813-2021 信息安全技术 工业控制系统安全防护技术要求和测试评价方法（中英文版） Information security technology—Security protection technical requirements and testing evaluation methods of industrial control systems |
|
|
|
|
GB/T 26548.10-2021 手持便携式动力工具? 振动试验方法? 第10部分：冲击式凿岩机、锤和破碎器（中英文版） Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 10: Percussive drills, hammers and breakers |
|
|
|
|
GB/T 26548.11-2021 手持便携式动力工具 振动试验方法 第11部分：石锤（中英文版） Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 11:Stone hammers |
|
|
|
|
GB/T 40826-2021 分梳山羊绒手排长度试验方法 图板电子扫描仪法（中英文版） Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method |
|
|
|
|
GB/T 40858-2021 太阳能光热发电站集热管通用要求与测试方法（中英文版） General requirements and test methods for receivers of solar thermal power plants |
|
|
|
|
GB/T 40731-2021 精密减速器回差测试与评价方法（中英文版） Method of test and evaluation for lost motion of precision reducer |
|
|
|
|
GB/T 40856-2021 车载信息交互系统信息安全技术要求及试验方法（中英文版） Technical requirements and test methods for cybersecurity of on-board information interactive system |
|
|
|
|
GB/T 6683.1-2021 石油及相关产品 测量方法与结果精密度 第1部分：试验方法精密度数据的确定（中英文版） Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test |
|
|
|
|
GB/T 19789-2021 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法（中英文版） Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor |
|
|
|
|
GB/T 26548.8-2021 手持便携式动力工具? 振动试验方法? 第8部分：往复式锯、抛光机和锉刀以及摆式或回转式锯（中英文版） Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action |
|
|
|
|
GB/T 40857-2021 汽车网关信息安全技术要求及试验方法（中英文版） Technical requirements and test methods for cybersecurity of vehicle gateway |
|
|
|
|
GB/T 26548.12-2021 手持便携式动力工具 振动试验方法 第12部分：模具砂轮机（中英文版） Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 12：Die grinders |
|
|
|
|
GB/T 5169.20-2021 电工电子产品着火危险试验 第20部分：火焰表面蔓延 试验方法概要和相关性（中英文版） Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|
|
|
|
GB/T 40725-2021 浸胶帘线与橡胶粘合剥离性能试验方法（中英文版） Test method of dipped cord and rubber adhesive peeling performance |
|
|
|
|
GB/T 4985-2021 石油蜡针入度测定法（中英文版） Standard test method for needle penetration of petroleum waxes |
|
|
|
|
GB/T 40855-2021 电动汽车远程服务与管理系统信息安全技术要求及试验方法（中英文版） Technical requirements and test methods for cybersecurity of remote service and management system for electric vehicles |
|
|
|
|
GB/T 39507-2020 皮革 物理和机械试验 耐磨性能的测定：马丁代尔球盘法（中英文版） Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method |
|
|
|
|
GB/T 39513-2020 卫生杀虫剂现场药效测定与评价 驱避剂（中英文版） Field efficacy test methods and criterions of public health insecticides—Repellent |
|
|
|
|
GB/T 39165-2020 电阻点焊及凸焊接头的剥离和凿离试验方法（中英文版） Test method of peel and chisel for resistance spot and projection welds |
|
|
|
|
GB/T 39166-2020 电阻点焊、凸焊及缝焊接头的机械剥离试验方法（中英文版） Test method of mechanized peel for resistance spot, projection and seam welds |
|
|
|
|
GB/T 39167-2020 电阻点焊及凸焊接头的拉伸剪切试验方法（中英文版） Test method of tensile shear for resistance spot and embossed projection welds |
|
|
|
|
GB/T 39199-2020 聚乙烯（PE）塑料再生料的表征特性及检测方法（中英文版） Characterization and testing methods of recycled polyethylene (PE) |
|
|
|
|
GB/T 39152-2020 铜及铜合金弯曲应力松弛试验方法（中英文版） Test method of the bending stress relaxation for copper and copper alloy |
|
|
|
|
GB/T 39086-2020 电动汽车用电池管理系统功能安全要求及试验方法（中英文版） Functional safety requirements and testing methods for battery management system of electric vehicles |
|
|
|
|
GB/T 39006-2020 工业机器人特殊气候环境可靠性要求和测试方法（中英文版） Requirements and test methods of special climate conditions reliability for industrial robots |
|
|
|
|
GB/T 38930-2020 民用轻小型无人机系统抗风性要求及试验方法（中英文版） Requirements and test methods of the capability of wind resistance for civil small and light unmanned aircraft system |
|
|
|
|
GB/T 16937-2020 土方机械 司机视野 试验方法和性能准则（中英文版） Earth-moving machinery—Operator’s field of view—Test method and performance criteria |
|
|
|
|
GB/T 39082-2020 电阻点焊、凸焊及缝焊接头的维氏硬度试验方法（中英文版） Test method of vickers hardness testing for resistance spot,projection and seam welds |
|
|
|
|
GB/T 39081-2020 电阻点焊及凸焊接头的十字拉伸试验方法（中英文版） Test method of cross tension test for resistance spot and embossed projection welds |
|
|
|
|
GB/T 24328.6-2020 卫生纸及其制品 第6部分: 吸水时间和吸水能力的测定 篮筐浸没法（中英文版） Tissue paper and tissue products—Part 6: Determination of water-absorption time and water-absorption capacity—Basket-immersion test method |
|
|
|
|
GB/T 4214.7-2020 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for tumbler dryers |
|
|
|
|
GB/T 4214.4-2020 家用和类似用途电器噪声测试方法 洗衣机和离心式脱水机的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for washing machines and spin extractors |
|
|
|
|
GB/T 4214.2-2020 家用和类似用途电器噪声测试方法 真空吸尘器的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for vacuum cleaners |
|
|
|
|
GB/T 38924.9-2020 民用轻小型无人机系统环境试验方法 第9部分：防水性试验（中英文版） Environmental test methods for civil small and light unmanned aircraft system—Part 9: Waterproofness test |
|
|
|
|
GB/T 20671.5-2020 非金属垫片材料分类体系及试验方法 第5部分：垫片材料蠕变松弛率试验方法（中英文版） Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials |
|
|
|
|
GB/T 38796-2020 汽车爆胎应急安全装置性能要求和试验方法（中英文版） Performance requirements and test methods of automobile blow-out emergency safety device |
|
|
|
|
GB/T 38842-2020 实用超导线的分类和检测方法 一般特性和指南（中英文版） Categories and test methods of practical superconducting wires—General characteristics and guidance |
|
|
|
|
GB/T 8763-2020 非蒸散型吸气材料及制品吸气性能测试方法（中英文版） Test methods for gas absorption characteristic of non-evaporation gettering materials and products |
|
|
|
|
GB/T 12967.1-2020 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定（中英文版） Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance |
|
|
|
|
GB/T 20671.6-2020 非金属垫片材料分类体系及试验方法 第6部分：垫片材料与金属表面黏附性试验方法（中英文版） Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces |
|
|
|
|
GB/T 20671.3-2020 非金属垫片材料分类体系及试验方法 第3部分:垫片材料耐液性试验方法（中英文版） Classification system and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials |
|
|
|
|
GB/T 38786-2020 镁及镁合金铸锭纯净度检验方法（中英文版） Testing method for cleanliness of magnesium and magnesium alloy ingots |
|
|
|
|
GB/T 38908-2020 家用反渗透及纳滤膜元件耐氯性测试方法（中英文版） Test methods of chlorine resistance performance of household reverse osmosis and nanofiltration membrane elements |
|
|
|
|
GB/T 38913-2020 核级锆及锆合金管材氢化物取向因子检测方法（中英文版） Test methods for hydride orientation fraction of nuclear grade zirconium and zirconium alloy tubes |
|
|
|
|
GB/T 14563-2020 高岭土及其试验方法（中英文版） Specification and test method of kaolin clay |
|
|
|
|
GB/T 38775.4-2020 电动汽车无线充电系统 第4部分：电磁环境限值与测试方法（中英文版） Electric vehicle wireless power transfer—Part 4：Limits and test methods of electromagnetic environment |
|
|
|
|
GB/T 38797-2020 基于公用电信网的宽带客户网络设备安全测试方法 宽带客户网关（中英文版） Test method for security of broadband customer network equipment based on public telecommunication network—Broadband customer gateway |
|
|
|
|
GB/T 4334-2020 金属和合金的腐蚀 奥氏体及铁素体-奥氏体（双相）不锈钢晶间腐蚀试验方法（中英文版） Corrosion of metals and alloys－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels |
|
|
|
|
GB/T 38611-2020 办公家具 办公工作椅 稳定性、强度和耐久性测试方法（中英文版） Office furniture—Office work chairs—Test methods for the determination of stability, strength and durability |
|
|
|
|
GB/T 8243.14-2020 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验（中英文版） Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings |
|
|
|
|
GB/T 17475-2020 重烃类混合物蒸馏试验 真空釜式蒸馏法（中英文版） Standard test method for distillation of heavy hydrocarbon mixtures—Vacuum potstill method |
|
|
|
|
GB/T 38607-2020 办公家具 桌台类 稳定性、强度和耐久性测试方法（中英文版） Office furniture—Tables and desks—Test methods for the determination of stability, strength and durability |
|
|
|
|
GB/T 38612-2020 人造革合成革试验方法 拉伸负荷及断裂伸长率的测定（中英文版） Test method of artificial leather and synthetic leather—Determination of tensile load and elongation at break |
|
|
|
|
GB/T 38694-2020 车辆右转弯提示音要求及试验方法（中英文版） Requirements and test methods of alert for vehicle turnning right |
|
|
|
|
GB/T 26548.4-2020 手持便携式动力工具 振动试验方法 第4部分：直柄式砂轮机（中英文版） Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 4:Straight grinders |
|
|
|
|
GB/T 5137.3-2020 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验（中英文版） Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests |
|
|
|
|
GB/T 9966.3-2020 天然石材试验方法 第3部分：吸水率、体积密度、真密度、真气孔率试验（中英文版） Test methods for natural stone--Part 3: Determination of water absorption, bulk density, true density and true porosity |
|
|
|
|
GB/T 9966.2-2020 天然石材试验方法 第2部分：干燥、水饱和、冻融循环后弯曲强度试验（中英文版） Test methods for natural stone--Part 2: Determination of dry, wet and after freezing flexural strength |
|
|
|
|
GB/T 9966.1-2020 天然石材试验方法 第1部分：干燥、水饱和、冻融循环后压缩强度试验（中英文版） Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength |
|
|
|
|
GB/T 6885-2020 硬质合金 混合粉取样和试验方法（中英文版） Hardmetals--Sampling and testing method of mixed powders |
|
|
|
|
GB/T 38464-2020 人造革合成革试验方法 耐揉搓性的测定（中英文版） Test method of artificial leather and synthetic leather—Determination of cold resistance |
|
|
|
|
GB/T 38465-2020 人造革合成革试验方法 耐寒性的测定（中英文版） Test method of artificial leather and synthetic leather—Determination of cold resistance |
|
|
|
|
GB/T 39706-2020 石膏中SO42-溶出速率、溶出量的测定方法（中英文版） Test method for dissolution rate and quantity of SO42- released from gypsum |
|
|
|
|
GB/T 39524-2020 建筑门窗耐候性能试验方法（中英文版） Test method of weatherability for building windows and doors |
|
|
|
|
GB/T 39702-2020 汽车轮胎力和力矩试验方法（中英文版） Test method for force and moment of motor vehicle tyres |
|
|
|
|
GB/T 39701-2020 粉煤灰中铵离子含量的限量及检验方法（中英文版） Limit and test method of ammonium ion content in fly ash |
|
|
|
|
GB/T 23663-2020 汽车轮胎纵向和横向刚性试验方法（中英文版） Test method for longitudinal and lateral stiffness of motor vehicle tyres |
|
|
|
|
GB/T 23899-2020 林业企业能耗测试与计算方法（中英文版） Test and calculation methods of energy consumption for forestry enterprises |
|
|
|
|
GB/T 39585-2020 光电测量 配光测试系统的性能要求和检测方法（中英文版） Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system |
|
|
|
|
GB/T 39686-2020 陶瓷厚涂层的弹性模量与强度试验方法（中英文版） Test method for determining elastic modulus and strength of thick ceramic coatings |
|
|
|
|
GB/T 39716-2020 光催化材料及制品空气净化性能测试方法 氮氧化物的去除（中英文版） Test method for air-purification performance of photocatalytic materials and products—Removal of nitric oxide |
|
|
|
|
GB/T 39526-2020 建筑幕墙空气声隔声性能分级及检测方法（中英文版） Classification and test method for airborne sound insulation performance of curtain wall |
|
|
|
|
GB/T 39709-2020 动车组玻璃、车窗耐静压及车窗密封性能试验方法（中英文版） Test methods of multiple units glass, windiows static pressure and windiows sealing performance |
|
|
|
|
GB/T 25217.14-2020 冲击地压测定、监测与防治方法 第14部分：顶板水压致裂防治方法（中英文版） Methods for test, monitoring and prevention of rock burst—Part 14: Prevention method of roof hydraulic fracturing |
|
|
|
|
GB/T 25217.9-2020 冲击地压测定、监测与防治方法 第9部分：煤层注水防治方法（中英文版） Methods for test, monitoring and prevention of rock burst—Part 9: Prevention method of water infusion on coal seam |
|
|
|
|
GB/T 5211.3-2020 颜料和体质颜料通用试验方法 第3部分：105℃挥发物的测定（中英文版） General methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃ |
|
|
|
|
GB/T 5211.6-2020 颜料和体质颜料通用试验方法 第6部分：水悬浮液pH值的测定（中英文版） General methods of test for pigments and extenders—Part 6: Determination of pH value of an aqueous suspension |
|
|
|
|
GB/T 24981.1-2020 稀土长余辉荧光粉试验方法 第1部分：发射主峰和色品坐标的测定（中英文版） Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates |
|
|
|
|
GB/T 26548.7-2020 手持便携式动力工具 振动试验方法 第7部分：冲剪机和剪刀（中英文版） Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears |
|
|
|
|
GB/T 35465.4-2020 聚合物基复合材料疲劳性能测试方法 第4部分：拉-压和压-压疲劳（中英文版） Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue |
|
|
|
|
GB/T 39382-2020 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法（中英文版） Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints |
|
|
|
|
GB/T 13217.1-2020 油墨颜色和着色力检验方法（中英文版） Test method for colour and tinctorial strength of ink |
|
|
|
|
GB/T 39243-2020 船用生物可溶性矿物棉制品技术要求及试验方法（中英文版） Technical requirements and test methods of marine biosoluble mineral wool product |
|
|
|
|
GB/T 39323-2020 乘用车车道保持辅助（LKA）系统性能要求及试验方法（中英文版） Performance requirement and testing method for lane keeping assist (LKA) system of passenger cars |
|
|
|
|
GB/T 39329-2020 增材制造 测试方法 标准测试件精度检验（中英文版） Additive manufacturing—Test methods—Precision inspection of standard test artifacts |
|
|
|
|
GB/T 39368-2020 皮革 物理和机械试验 耐折牢度的测定：鞋面弯曲法（中英文版） Leather—Physical and mechanical tests—Determination of flex resistance：Vamp flex method |
|
|
|
|
GB/T 5169.30-2020 电工电子产品着火危险试验 第30部分：热释放 试验方法概要和相关性（中英文版） Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods |
|
|
|
|
GB/T 50081-2019 混凝土物理力学性能试验方法标准（中英文版） Standard for test method of physical and mechanical properties on concrete |
|
|
|
|
GB/T 25217.11-2019 冲击地压测定、监测与防治方法 第11部分：煤层卸压爆破防治方法（中英文版） Methods for test, monitoring and prevention of rock burst—Part 11: Prevention method of destress blasting in coal seam |
|
|
|
|
GB/T 25217.12-2019 冲击地压测定、监测与防治方法 第12部分：开采保护层防治方法（中英文版） Methods for test, monitoring and prevention of rock burst—Part 12: Prevention method of protective seam mining |
|
|
|
|
GB/T 25217.7-2019 冲击地压测定、监测与防治方法 第7部分：采动应力监测方法（中英文版） Methods for test, monitoring and prevention of rock burst—Part 7: Monitoring method of mining-induced stress |
|
|
|
|
GB/T 37780-2019 玻璃材料弹性模量、剪切模量和泊松比试验方法（中英文版） Test method for elastic modulus，shear modulus and Poisson’s ratio of glass |
|
|
|
|
GB/T 37841-2019 塑料薄膜和薄片耐穿刺性测试方法（中英文版） Test method for puncture resistance of plastic film and sheeting |
|
|
|
|
GB/T 25217.10-2019 冲击地压测定、监测与防治方法 第10部分：煤层钻孔卸压防治方法（中英文版） Methods for test, monitoring and prevention of rock burst—Part 10: Prevention method of drillhole destressing on coal-seam |
|
|
|
|
GB/T 37852-2019 玻璃容器 以容器底部作基准的高度和口部不平行度 试验方法（中英文版） Class containers—Height and non-parallelism of finish with reference to container base—Test methods |
|
|
|
|
GB/T 37477-2019 救援装备水面搭载与吊放仿真试验方法（中英文版） Simulation test methods of surface support,launch and recovery for rescue system |
|
|
|
|
GB/T 37900-2019 超薄玻璃硬度和断裂韧性试验方法 小负荷维氏硬度压痕法（中英文版） Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method |
|
|
|
|
GB/T 37849-2019 液相色谱飞行时间质谱联用仪性能测定方法（中英文版） Method of performance testing for liquid chromatography tandem time of flight mass spectrometry |
|
|
|
|
GB/T 37619-2019 金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法（中英文版） Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes |
|
|
|
|
GB/T 37656-2019 海上导航和无线电通信设备及系统 D级数字选择性呼叫（DSC）甚高频（VHF）无线电话 测试方法及要求的测试结果（中英文版） Maritime navigation and radiocommunication equipment and systems—VHF radiotelephone equipment incorporating Class“D”Digital Selective Calling（DSC）—Methods of testing and required test results |
|
|
|
|
GB/T 24113.2-2019 机械电气设备 塑料机械计算机控制系统 第2部分：试验与评价方法（中英文版） Electrical equipment of machines—Computer control systems for plastics machinery—Part 2：Test and evaluation method |
|
|
|
|
GB/T 3142-2019 润滑剂承载能力的测定 四球法（中英文版） Standard test method for determination of load-carrying capacity of lubricants—Four-ball method |
|
|
|
|
GB 15742-2019 机动车用喇叭的性能要求及试验方法（中英文版） Performance requirements and test methods of horn for motor vehicles |
|
|
|
|
GB/T 37474-2019 汽车安全气囊系统误作用试验的方法和要求（中英文版） Methods and requirements of airbag system abuse test for automobile |
|
|
|
|
GB/T 37417-2019 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果（中英文版） Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements，methods of testing and required test results |
|
| 找到:1013條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 |
