中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
 |
GB/T 26918-2011 选煤厂 煤的转筒泥化试验方法（中英文版） Coal preparation plant - Test methods for degradation in water of raw coal feed in drum |
 |
|
|
|
GB/T 26812-2011 离子选择电极校准溶液制备方法（中英文版） Preparation method of reference solutions for the measurement of ion selective electrodes |
|
|
|
|
GB/T 25777-2010 焊接材料熔敷金属化学分析试样制备方法（中英文版） Preparation methods for deposited metal specimens of chemical analysis |
|
|
|
|
GB/T 25774.1-2010 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验（中英文版） Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys |
|
|
|
|
GB/T 25774.3-2010 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验（中英文版） Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint |
|
|
|
|
GB/T 14262-2010 散装浮选铅精矿取样、制样方法（中英文版） Methods for sampling and sample preparation of flotation lead concentrates in bulk |
|
|
|
|
GB/T 14263-2010 散装浮选铜精矿取样、制样方法（中英文版） Methods for sampling and sample preparation of flotation copper concentrates in bulk |
|
|
|
|
GB/T 14261-2010 散装浮选锌精矿取样、制样方法（中英文版） Methods for sampling and sample preparation of flotation zinc concentrates in bulk |
|
|
|
|
GB/T 25151.4-2010 尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取（中英文版） Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
|
|
|
|
GB/T 24326-2009 纸浆 物理试验用实验室纸页的制备 快速凯塞法（中英文版） Pulps - Preparation of laboratory sheets for physical testing - Rapid-Kothen method |
|
|
|
|
GB/T 24324-2009 纸浆 物理试验用实验室纸页的制备 常规纸页成型器法（中英文版） Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method |
|
|
|
|
GB/T 24232-2009 锰矿石和铬矿石 校核取样和制样偏差的试验方法（中英文版） Manganese and chromium ores - Experimental methods for checking the bias of sampling and sample preparation |
|
|
|
|
GB/T 5275.10-2009 气体分析 动态体积法制备校准用混合气体 第10部分：渗透法（中英文版） Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method |
|
|
|
|
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分：水溶性硫酸盐的现场浊度测定法（中英文版） Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|
|
|
|
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
|
|
|
|
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|
|
|
|
GB/T 22661.1-2008 氟硼酸钾化学分析方法 第1部分：试样的制备和贮存（中英文版） Chemical analysis methods of potassium fluoborade - Part 1: preparation and storage of test samples |
|
|
|
|
GB/T 22660.1-2008 氟化锂化学分析方法 第1部分：试样的制备和贮存（中英文版） Chemical analysis methods of lithium fluoride - Part 1: Preparation and storage of test samples |
|
|
|
|
GB/T 22662.1-2008 氟钛酸钾化学分析方法 第1部分：试样的制备和贮存（中英文版） Chemical analysis methods of potassium fluotitanate - Part 1: Preparation and storage of test samples |
|
|
|
|
GB 474-2008 煤样的制备方法（中英文版） Method for preparation of coal sample |
|
|
|
|
GB/T 2007.4-2008 散装矿产品取样、制样通则 偏差、精密度校核试验方法（中英文版） General rules for the sampling and sample preparation of minerals in bulk - Experimental methods for checking the precision and bias |
|
|
|
|
GB/T 5274-2008 气体分析 校准用混合气体的制备 称量法（中英文版） Gas analysis - Preparation of calibration gas mixture - Gravimetric method |
|
|
|
|
GB/T 21991-2008 塑料 试验用聚氯乙烯（PVC）糊的制备 行星混合器法（中英文版） Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method |
|
|
|
|
GB/T 16613-2008 塑料 试验用聚氯乙烯（PVC）糊的制备 分散器法（中英文版） Plastics - Preparation of PVC pastes for test purposes - Dissolver method |
|
|
|
|
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
|
|
|
|
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|
|
|
|
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|
|
|
|
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|
|
|
|
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
|
|
|
|
GB/T 18570.8-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture |
|
|
|
|
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法)（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
|
|
|
|
GB/T 18570.3-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法)（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) |
|
|
|
|
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
|
|
|
|
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|
|
|
|
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|
|
|
|
GB/T 19816.1-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling |
|
|
|
|
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|
|
|
|
GB/T 6058-2005 纤维缠绕压力容器制备和内压试验方法（中英文版） Test method for preparation and internal pressure testing of filament-wound pressure vessels |
|
|
|
|
GB/T 10248-2005 气体分析 校准用混合气体的制备 静态体积法（中英文版） Gas analysis-Preparation of calibration gas mixtures-Static volumetric methods |
|
|
|
|
GB/T 19494.2-2004 煤炭机械化采样 第2部分:煤样的制备（中英文版） Mechanical sampling of coal--Part 2:Method for sample preparation |
|
|
|
|
GB/T 19495.7-2004 转基因产品检测 抽样和制样方法（中英文版） Detection of genetically modified organisms and derived products--Methods for sampling and sample preparation |
|
|
|
|
GB/T 6609.23-2004 氧化铝化学分析方法和物理性能测定方法 试样的制备和贮存（中英文版） Chemical analysis methods and determination of physical performance of alumina--Preparation andstorage of test samples |
|
|
|
|
GB/T 603-2002 化学试剂 试验方法中所用制剂及制品的制备（中英文版） Chemical reagent--Preparations of reagent solutions for use in test methods |
|
|
|
|
GB/T 18839.3-2002 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning |
|
|
|
|
GB/T 18839.2-2002 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning |
|
|
|
|
GB/T 18839.1-2002 涂覆涂料前钢材表面处理 表面处理方法 总则（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles |
|
|
|
|
GB/T 18249-2000 检查铁合金取样和制样偏差的试验方法（中英文版） Ferroalloys--Experimental methods for checking the bias of sampling and sample preparation |
|
|
|
|
GB/T 17849-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法（中英文版） Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives |
|
|
|
|
GB/T 17365-1998 金属与合金电子探针定量分析样品的制备方法（中英文版） Method of preparation for samples of metal and alloy in electron probe microanalysis |
|
|
|
|
GB/T 17366-1998 矿物岩石的电子探针分析试样的制备方法（中英文版） Methods of mineral and rock specimen preparation for EPMA |
|
| 找到:115條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |
