中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 31967.2-2015 稀土永磁材料物理性能测试方法 第2部分:抗弯强度和断裂韧度的测定(中英文版) Test method for physical property of rare earth permanent magnetic materials—Part 2:Determination of bending strength and fracture toughness |
|||
GB/T 4372.4-2015 直接法氧化锌化学分析方法 第4部分:氧化镉量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of zincoxide produced by direct process—Part 4:Determination of cadmium oxide content—Flame atomic absorption spectrometry method |
|||
GB/T 4372.3-2015 直接法氧化锌化学分析方法 第3部分:氧化铜量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of zincoxide produced by direct process—Part 3:Determination of copper oxide content—Flame atomic absorption spectrometry method |
|||
GB/T 31479-2015 与食品接触染色纸和纸板色牢度的测定(中英文版) Determination of colour fastness of dyed paper and board intended to come into contact with foodstuffs |
|||
GB/T 7759.1-2015 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分:在常温及高温条件下(中英文版) Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1: At ambient or elevated temperatures |
|||
GB/T 31562-2015 铸造机械 清洁度测定方法(中英文版) Foundry machinery—Determination of cleanliness |
|||
GB/T 15256-2014 硫化橡胶或热塑性橡胶 低温脆性的测定(多试样法)(中英文版) Rubber, vulcanized or thermoplastic―Determination of low-temperature brittleness(multiple test piece method) |
|||
GB/T 1682-2014 硫化橡胶 低温脆性的测定 单试样法(中英文版) Rubber,vulcanized―Determination of low-temperature brittleness―Single test piece method |
|||
GB/T 7759.2-2014 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第2部分:在低温条件下(中英文版) Rubber,vulcanized or thermoplastic―Determination of compression set―Part 2:At low temperatures |
|||
GB/T 4372.5-2014 直接法氧化锌化学分析方法 第5部分:锰量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of zinc oxide produced by direct process―Part 5:Determination of manganese content―Flame atomic absorption spectrometry method |
|||
GB/T 4372.1-2014 直接法氧化锌化学分析方法 第1部分:氧化锌量的测定 Na2EDTA滴定法(中英文版) Methods for chemical analysis of zincoxide produced by direct process―Part 1:Determination of zinc oxide content―Na2EDTA titration method |
|||
GB/T 7991.5-2014 搪玻璃层试验方法 第5部分:用电磁法测量厚度(中英文版) Test method of viterous and porcelain enamels—Part 5:Determination of thickness by electromagnetic mothod |
|||
GB/T 4372.2-2014 直接法氧化锌化学分析方法 第2部分:氧化铅量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of zinc oxide produced by direct process―Part 2:Determination of lead oxide content―Flame atomic absorption spectrometry method |
|||
GB/T 12967.4-2014 铝及铝合金阳极氧化膜检测方法 第4部分:着色阳极氧化膜耐紫外光性能的测定(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
|||
GB/T 31295-2014 风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定(中英文版) The core to wind turbine blade―Determination of dimensional stability at elevated temperatures with flexural load and with compressive load |
|||
GB/T 31310-2014 金属材料 残余应力测定 钻孔应变法(中英文版) Metallic material—Determination of residual stress—Hole drilling strain-gauge method |
|||
GB/T 21143-2014 金属材料 准静态断裂韧度的统一试验方法(中英文版) Metallic materials―Unified method of test for determination of quasistatic fracture toughness |
|||
GB/T 31218-2014 金属材料 残余应力测定 全释放应变法(中英文版) Metallic materials—Determination of residual stress—Sectioning relaxation strain-gage method |
|||
GB/T 31226-2014 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法(中英文版) Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components |
|||
GB/T 31202-2014 农业和林业机械及园林机械 手扶控制和手持控制机械 灼热表面可触及性的测定(中英文版) Agricultural and forestry machinery and garden machinery—Pedestrian controlled and hand-held machines—Determination of accessibility of hot surfaces |
|||
GB/T 30965-2014 土方机械 履带式机器平均接地比压的确定(中英文版) Earth-moving machinery―Determination of average ground contact pressure for crawler machines |
|||
GB/T 30908-2014 摄影 加工废液 硼的测定(中英文版) Photography―Processing wastes―Determination of boron |
|||
GB/T 2383-2014 粉状染料 筛分细度的测定(中英文版) Powder dyes―Determination of fineness by sieve analysis |
|||
GB/T 10663-2014 分散染料 移染性的测定 高温染色法(中英文版) Disperse dyes―Determination of migration property―High temperature dyeing process |
|||
GB/T 30833-2014 气压传动 设备消耗的可压缩流体 压缩空气功率的表示及测量(中英文版) Pneumatic fluid power―Compressible fluids consumed by equipment―Power determination and measurement of compressible air |
|||
GB/T 13480-2014 建筑用绝热制品 压缩性能的测定(中英文版) Thermal insulating products for building applications―Determination of compression behaviour |
|||
GB/T 2396-2013 分散染料 固色率的测定 热熔染色法(中英文版) Disperse dyes—Determination of degree of fixation—Thermosol dyeing process |
|||
GB/T 30158-2013 纺织制品附件镍释放量的测定(中英文版) Determination of nickel released from accessories on textile products |
|||
GB/T 5753-2013 钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法(中英文版) Steel cord conveyor belts―Methods for the determination of total thickness and cover thickness |
|||
GB/T 7689.1-2013 增强材料 机织物试验方法 第1部分:厚度的测定(中英文版) Reinforcements - Test method for woven fabrics - Part 1:Determination of thickness |
|||
GB/T 7689.4-2013 增强材料 机织物试验方法 第4部分:弯曲硬挺度的测定(中英文版) Reinforcements - Test method for woven fabrics - Part 4: Determination of flexural stiffness |
|||
GB/T 29775-2013 纸浆 纤维粗度的测定 图像分析法(中英文版) Pulps - Determination of fiber coarseness by automated optical analysis - Image analysis method |
|||
GB/T 4893.5-2013 家具表面漆膜理化性能试验 第5部分:厚度测定法(中英文版) Test of surface coatings of furniture - Part 5: Determination of thickness |
|||
GB/T 7690.4-2013 增强材料 纱线试验方法 第4部分:硬挺度的测定(中英文版) Reinforcements - Test method for yarns - Part 4: Determination of stiffness |
|||
GB/T 6006.3-2013 玻璃纤维毡试验方法 第3部分:厚度的测定(中英文版) Test method for glass mats - Part 3:Determination of thickness |
|||
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p |
|||
GB/T 29367-2012 轧花企业粉尘检测方法(中英文版) Determination of dust in cotton processing enterprises |
|||
GB/T 22159.2-2012 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分:弹性支撑件平动动刚度的直接测量方法(中英文版) Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
|||
GB/T 1481-2012 金属粉末(不包括硬质合金粉末)在单轴压制中压缩性的测定(中英文版) Metallic powders (excluding powders for hardmetals) - Determination of compressibility in uniaxial compression |
|||
GB/T 4324.26-2012 钨化学分析方法 第26部分:氮量的测定 脉冲加热惰气熔融-热导法和奈氏试剂分光光度法(中英文版) Methods for chemical analysis of tungsten - Part 26: Determination of nitrogen content - Pulse heating inert gas fusion-thermal conductive method and the Nessler reagent spectrophotometry |
|||
GB/T 8107-2012 液压阀 压差-流量特性的测定(中英文版) Hydraulic fluid power-Valves - Determination of pressure differential/flow characteristics |
|||
GB/T 28896-2012 金属材料 焊接接头准静态断裂韧度测定的试验方法(中英文版) Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds |
|||
GB/T 27894.5-2012 天然气 在一定不确定度下用气相色谱法测定组成 第5部分:实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类(中英文版) Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns |
|||
GB/T 28891-2012 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定(中英文版) Fibre-reinforced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials |
|||
GB/T 7048-2012 色素炭黑 黑度的测定(中英文版) Colour carbon black - Determination of blackness |
|||
GB/T 28125.1-2011 空分工艺中危险物质的测定 第1部分:碳氢化合物的测定(中英文版) Determination of hazardous materials in air separation process - Part 1: Determination of hydrocarbons |
|||
GB/T 28122-2011 液晶显示器(LCD)用聚乙烯醇(PVA)膜 厚度测定方法(中英文版) Polyvinyl alcohol (PVA) films for liquid crystal display(LCD)-Determination of thickness |
|||
GB/T 27894.2-2011 天然气 在一定不确定度下用气相色谱法测定组成 第2部分:测量系统的特性和数理统计(中英文版) Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data |
|||
GB/T 27582-2011 光学功能薄膜 等离子电视用电磁波屏蔽膜 屏蔽效能测定方法(中英文版) Optical functional films - Electromagnetic interference shielding film for plasma TV - Determination of shielding effectiveness |
|||
GB/T 27580-2011 精油和芳香萃取物 残留苯含量的测定(中英文版) Essential oils and aromatic extracts - Determination of residual benzene content |
|||
GB/T 27596-2011 染料 颗粒细度的测定 显微镜法(中英文版) Dyestuffs - Determination of particle fineness - Microscope method |
|||
GB/T 27594-2011 分散染料 原染料相对强度的测定 分光光度法(中英文版) Disperse dyestuffs - Determination of relative strength of presscakes - Spectrophotometer method |
|||
GB/T 11059-2011 原油蒸气压的测定 膨胀法(中英文版) Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method) |
|||
GB/T 5504-2011 粮油检验 小麦粉加工精度检验(中英文版) Inspection of grain and oils - Determination of processing degree of wheat flour |
|||
GB/T 26464-2011 造纸无机颜料亮度(白度)的测定(中英文版) Determination of brightness(whiteness) for paper inorganic pigments |
|||
GB/T 26168.4-2010 电气绝缘材料 确定电离辐射的影响 第4部分:运行中老化的评定程序(中英文版) Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Procedures for assessment of ageing in service |
|||
GB/T 25836-2010 微量硬度快速测定方法(中英文版) Rapid determination method of micro-hardness |
|||
GB/T 25615-2010 土方机械 司机位置发射声压级的测定 动态试验条件(中英文版) Earth-moving machinery - Determination of emission sound pressure level at operator’s position - Dynamic test conditions |
|||
GB/T 25613-2010 土方机械 司机位置发射声压级的测定 定置试验条件(中英文版) Earth-moving machinery - Determination of emission sound pressure level at operator’s position - Stationary test conditions |
|||
GB/T 25276-2010 液晶显示器(LCD)用三醋酸纤维素酯(TAC)膜 厚度测定方法(中英文版) Triacetyl cellulose (TAC) films for liquid crystal display(LCD)- Determination of thickness |
|||
GB/T 24981.2-2010 稀土长余辉荧光粉试验方法 第2部分:相对亮度的测定(中英文版) Test methods of long afterglow phosphors activated by rare earths - Part 2: Determination of relative brightness |
|||
GB/T 14634.1-2010 灯用稀土三基色荧光粉试验方法 第1部分:相对亮度的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 1: Determination of relative brightness |
|||
GB 22031-2010 食品安全国家标准 干酪及加工干酪制品中添加的柠檬酸盐的测定(中英文版) National Food Safety Standard-Determination of citrate added to cheese and processed cheese products |
|||
GB/T 24793-2009 摄影 加工废液 银含量的测定(中英文版) Photography - Processing wastes - Determination of silver content |
|||
GB/T 24792-2009 摄影 加工废液 氰化物分析 用光谱法测定六氰合亚铁酸盐(Ⅱ)和六氰合铁酸盐(Ⅲ)(中英文版) Processing photographic wastes - Analysis of cyanides - Determination of hexacyanoferrate(Ⅱ) and hexacyanoferrate(Ⅲ) by spectrometry |
|||
GB/T 24447-2009 纸浆 纤维粗度的测定 偏振光法(中英文版) Pulp - Determination of fiber coarseness - Polarized light method |
|||
GB/T 24442.2-2009 纺织品 压缩性能的测定 第2部分:等速法(中英文版) Textiles - Determination of compression property - Part 2: Constant rate method |
|||
GB/T 24442.1-2009 纺织品 压缩性能的测定 第1部分:恒定法(中英文版) Textiles - Determination of compression property - Part 1: Constant method |
|||
GB/T 24328.2-2009 卫生纸及其制品 第2部分:厚度、层积厚度和表观密度的测定(中英文版) Tissue paper and tissue products - Part 2: Determination of thickness,bulking thickness and apparent bulk density |
|||
GB/T 3222.2-2009 声学 环境噪声的描述、测量与评价 第2部分:环境噪声级测定(中英文版) Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of environmental noise levels |
|||
GB/T 1431-2009 炭素材料耐压强度测定方法(中英文版) Carbon materials-determination of the compressive strength |
|||
GB/T 24171.1-2009 金属材料 薄板和薄带 成形极限曲线的测定 第1部分:冲压车间成形极限图的测量及应用(中英文版) Metallic materials - Sheet and strip - Determination of forming limit curves - Part 1: Measurement and application of forming limit diagrams in press shop |
|||
GB/T 24254-2009 纺织品和服装 冷环境下需求热阻的确定(中英文版) Textile and clothing - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects |
|||
GB/T 24218.2-2009 纺织品 非织造布试验方法 第2部分:厚度的测定(中英文版) Textiles - Test methods for nonwovens - Part 2: Determination of thickness |
|||
GB/T 13761.1-2009 土工合成材料 规定压力下厚度的测定 第1部分:单层产品厚度的测定方法(中英文版) Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers |
|||
GB/T 23979.1-2009 荧光增白剂 增白强度和色光的测定 棉织物染色法(中英文版) Fluorescent whitening agents - Determination of relative whiteness and shade - Dyeing method for cotton fabric |
|||
GB/T 23979.2-2009 荧光增白剂 增白强度和色光的测定 纸张染色法(中英文版) Fluorescent whitening agents - Determination of relative whiteness and shade - Dyeing method for paper |
|||
GB/T 23886-2009 珍珠珠层厚度测定方法 光学相干层析法(中英文版) Determination of nacre thickness - Optical coherence tomography |
|||
GB/T 23901.5-2009 无损检测 射线照相底片像质 第5部分:双线型像质计 图像不清晰度的测定(中英文版) Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type) - Determination of image unsharpness value |
|||
GB/T 23774-2009 无机化工产品白度测定的通用方法(中英文版) Inorganic chemicas for industrial use - General method for the determination of whiteness |
|||
GB/T 23773-2009 无机化工产品中铵含量测定的通用方法 纳氏试剂比色法(中英文版) Inorganic chemicals for industrial use - General method for determination of ammonium content - Nessler’s reagent colorimetric method |
|||
GB/T 23772-2009 无机化工产品中总氮含量测定的通用方法 蒸馏-纳氏试剂比色法(中英文版) Inorganic chemicals for industrial use - General method for the determination of total nitrogen content - Nessler’s reagent colorimetric method |
|||
GB/T 7757-2009 硫化橡胶或热塑性橡胶 压缩应力应变性能的测定(中英文版) Rubber,vulcanized or thermoplastic - Determination of compression stress-strain properties |
|||
GB/T 531.2-2009 硫化橡胶或热塑性橡胶 压入硬度试验方法 第2部分:便携式橡胶国际硬度计法(中英文版) Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method |
|||
GB/T 528-2009 硫化橡胶或热塑性橡胶 拉伸应力应变性能的测定(中英文版) Rubber,vulcanized or thermoplastic - Determination of tensile stress-strain properties |
|||
GB/T 23595.2-2009 白光LED灯用稀土黄色荧光粉试验方法 第2部分:相对亮度的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 2: Determination of relative brightness |
|||
GB/T 6609.37-2009 氧化铝化学分析方法和物理性能测定方法 第37部分:粒度小于20μm颗粒含量的测定(中英文版) Chemical analysis methods and determination of physical performance of alumina - Part 37: Determination of the particles size content less then 20μm |
|||
GB/T 22838.13-2009 卷烟和滤棒物理性能的测定 第13部分:滤棒圆度(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 13: Filter rods roundness |
|||
GB/T 17527-2009 胡椒精油含量的测定(中英文版) Determination of pepper essential oils content |
|||
GB/T 22838.6-2009 卷烟和滤棒物理性能的测定 第6部分:硬度(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 6: Hardness |
|||
GB/T 22838.5-2009 卷烟和滤棒物理性能的测定 第5部分:卷烟吸阻和滤棒压降(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 5: Cigarettes draw resistance and filter rods pressure drop |
|||
GB/T 14208.3-2009 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分:压缩强度的测定(中英文版) Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength |
|||
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|||
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
|||
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|||
GB/T 18570.2-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分:清理过的表面上氯化物的实验室测定(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
|||
GB/T 1943-2009 木材横纹抗压弹性模量测定方法(中英文版) Method for determination of the modulus of elasticity in compression perpendicular to grain of wood |
|||
GB/T 18029.3-2008 轮椅车 第3部分:制动器的测定(中英文版) Wheelchairs - Part 3: Determination of effectiveness of brakes |
|||
GB/T 13025.2-2008 制盐工业通用试验方法 白度的测定(中英文版) General test method in salt industry - Determination of whiteness |
|||
GB/T 22785-2008 烟花爆竹用铝粉关键指标的测定(中英文版) Determination of essential parameters of aluminum powder for use in fireworks and firecrackers |
|||
GB/T 22781-2008 烟花爆竹用钛粉关键指标的测定(中英文版) Determination of essential parameters of titanium powder for use in fireworks and firecrackers |
|||
GB/T 22782-2008 烟花爆竹用氧化铜关键指标的测定(中英文版) Determination of essential parameters of cuprum oxide powder for use in fireworks and firecrackers |
|||
GB/T 22889-2008 皮革 物理和机械试验 表面涂层厚度的测定(中英文版) Leather - Physical and mechanical tests - Determination of surface coating thickness |
|||
GB/T 22783-2008 烟花爆竹用硝酸钾关键指标的测定(中英文版) Determination of essential parameters of potassium nitrate for use in fireworks and firecrackers |
|||
GB/T 22784-2008 烟花爆竹用铝镁合金粉关键指标的测定(中英文版) Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers |
|||
GB/T 22787-2008 烟花爆竹用冰晶石关键指标的测定(中英文版) Determination of essential parameters of cryolite for use in fireworks and firecrackers |
|||
GB/T 22866-2008 皮革五金配件 镍释放量的测定(中英文版) Leather hardware accessory - Determination of release of nickel |
|||
GB/T 22879-2008 纸和纸板 CIE白度的测定,C/2°(室内照明条件)(中英文版) Paper and board - Determination of CIE whiteness, C/2°( indoor illumination conditions) |
|||
GB/T 22881-2008 纸和纸板 粗糙度(平滑度)的测定(空气泄漏法) 通用方法(中英文版) Paper and board - Determination of roughness/smoothness(air leak methods) - General method |
|||
GB/T 22880-2008 纸和纸板 CIE白度的测定,D65/10°(室外日光)(中英文版) Paper and board - Determination of CIE whiteness, D65/10°(outdoor daylight) |
|||
GB/T 23144-2008 纸和纸板 静态弯曲挺度的测定 通用原理(中英文版) Paper and board - Determination of bending stiffness by static methods - General principle |
|||
GB/T 22786-2008 烟花爆竹用高氯酸钾关键指标的测定(中英文版) Determination of essential parameters of potassium perchlorate for use in fireworks and firecrackers |
|||
GB/T 22638.3-2008 铝箔试验方法 第3部分:粘附性的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 3: Determination of stickiness |
|||
GB/T 22638.1-2008 铝箔试验方法 第1部分:厚度的测定 重量法(中英文版) Test methods for aluminium and aluminium alloy foils - Part 1: Determination of thickness by gravimetric method |
|||
GB/T 22635-2008 门扇 湿度影响稳定性检测方法(中英文版) Door leaves - Determination of the behaviour under humidity variations in successive uniform climates |
|||
GB/T 7702.3-2008 煤质颗粒活性炭试验方法 强度的测定(中英文版) Test method for granular activated carbon from coal - Determination of hardness |
|||
GB/T 5507-2008 粮油检验 粉类粗细度测定(中英文版) Inspection of grain and oils - Determination for fineness degree of flours |
|||
GB/T 5502-2008 粮油检验 米类加工精度检验(中英文版) Inspection of grain and oils - Determination of processing degree of rice and other grain kernels |
|||
GB/T 22500-2008 动植物油脂 紫外吸光度的测定(中英文版) Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction |
|||
GB/T 22427.6-2008 淀粉白度测定(中英文版) Starch - Determination of whiteness |
|||
GB/T 22427.5-2008 淀粉细度测定(中英文版) Starch - Determination of fineness |
|||
GB/T 9338-2008 荧光增白剂 相对白度的测定 仪器法(中英文版) Fluorescent whitening agents - Determination of relative whiteness - Instrumental measurement |
|||
GB/T 11170-2008 不锈钢 多元素含量的测定 火花放电原子发射光谱法(常规法)(中英文版) Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) |
|||
GB/T 14271-2008 毛绒净毛率试验方法 油压法(中英文版) Test method for the determination of scoured yield raw wool - Oil pressure method |
|||
GB/T 12660-2008 纸浆 滤水性能的测定 “加拿大标准”游离度法(中英文版) Pulps - Determination of drainability -“Canadian Standard”freeness method |
|||
GB/T 6669-2008 软质泡沫聚合材料 压缩永久变形的测定(中英文版) Flexible cellular polymeric materials - Determination of compression set |
|||
GB/T 22363-2008 纸和纸板粗糙度的测定(空气泄漏法) 本特生法和印刷表面法(中英文版) Paper and board - Determination of roughness (air leak methods) - Bendtsen method and print-surf method |
|||
GB/T 5470-2008 塑料 冲击法脆化温度的测定(中英文版) Plastics - Determination of the brittleness temperature by impact |
|||
GB/T 10417-2008 碳化钨钢结硬质合金技术条件及其力学性能的测试方法(中英文版) Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness |
|||
GB/T 3398.2-2008 塑料 硬度测定 第2部分:洛氏硬度(中英文版) Plastics - Determination of hardness - Part 2:Rockwell hardness |
|||
GB/T 3398.1-2008 塑料 硬度测定 第1部分:球压痕法(中英文版) Plastics - Determination of hardness - Part 1: Ball indentation method |
|||
GB/T 2411-2008 塑料和硬橡胶 使用硬度计测定压痕硬度(邵氏硬度)(中英文版) Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness) |
|||
GB/T 12729.4-2008 香辛料和调味品 磨碎细度的测定(手筛法)(中英文版) Spices and condiments - Determination of degree of fineness of grinding - Hand sieving method |
|||
GB/T 6882-2008 声学 声压法测定噪声源声功率级 消声室和半消声室精密法(中英文版) Acoustics - Determination of sound power levels of noise sources using pressure - Precision methods for anechoic and hemi-anechoic rooms |
|||
GB/T 22159.3-2008 声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分:弹性支撑件平动动刚度的间接测量方法(中英文版) Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
|||
GB/T 16538-2008 声学 声压法测定噪声源声功率级 现场比较法(中英文版) Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ |
|||
GB/T 5258-2008 纤维增强塑料面内压缩性能试验方法(中英文版) Fiber-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
|||
GB/T 5072-2008 耐火材料 常温耐压强度试验方法(中英文版) Refractories - Determination of cold compressive strength |
|||
GB/T 17260-2008 亚麻纤维细度的测定 气流法(中英文版) Determination of fineness of flax - Permeametric method |
|||
GB/T 21990-2008 聚氯乙烯(PVC)糊 刮板细度的测定(中英文版) Polyvinyl chloride (PVC) pastes - Determination of fineness of grind |
|||
GB/T 531.1-2008 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度)(中英文版) Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) |
|||
GB/T 5989-2008 耐火材料 荷重软化温度试验方法 示差升温法(中英文版) Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature |
|||
GB/T 9996.2-2008 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第2部分:分别评定法(中英文版) Determination of appearance quality of yarns made of cotton or man-made fibers,or their blends by winding on the black board - Part 2: individual assessment |
|||
GB/T 9996.1-2008 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第1部分:综合评定法(中英文版) Determination of appearance quality of yarns made of cotton or man-made fibres,or their blends by winding on the black board - Part 1:comprehensive assessment |
|||
GB/T 1685-2008 硫化橡胶或热塑性橡胶 在常温和高温下压缩应力松弛的测定(中英文版) Rubber,vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures |
|||
GB/T 3780.4-2008 炭黑 第4部分:压缩试样吸油值的测定(中英文版) Carbon black - Part 4:Determination of oil absorption number for compressed sample |
|||
GB/T 13452.2-2008 色漆和清漆 漆膜厚度的测定(中英文版) Paints and varnishes - Determination of film thickness |
|||
GB/T 21862.4-2008 色漆和清漆 密度的测定 第4部分:压杯法(中英文版) Paints and varnishes - Determination of density - Part 4: Pressure cup method |
|||
GB/T 12832-2008 橡胶结晶效应的测定 硬度测量法(中英文版) Rubber-Determination of crystallization effects by hardness measurements |
|||
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
找到:396條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |