中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB 18279-2023 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求(中英文版) Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes |
|||
GB/Z 42217-2022 医疗器械 用于医疗器械质量体系软件的确认(中英文版) Medical devices for the validation of medical device quality system software |
|||
GB/T 39468-2020 陆地定量遥感产品真实性检验通用方法(中英文版) General methods for the validation of terrestrial quantitative remote sensing products |
|||
GB/T 19974-2018 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌过程的开发、确认和常规控制的通用要求(中英文版) Sterilization of health care products—General requirement for characterization of a sterilization agent and the development,validation and routine control of a sterilization process for medical devices |
|||
GB/T 19973.2-2018 医疗器械的灭菌 微生物学方法 第2部分:用于灭菌过程的定义、确认和维护的无菌试验(中英文版) Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition,validation and maintenance of a sterilization process |
|||
GB/T 32592-2016 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证(中英文版) Railway applications—Current collection systems—Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
|||
GB/T 32591-2016 轨道交通 受流系统 受电弓与接触网动态相互作用仿真的验证(中英文版) Railway applications—Current collection systems—Validation of simulation of the dynamic interaction between pantograph and overhead contact line |
|||
GB 18278.1-2015 医疗保健产品灭菌 湿热 第1部分:医疗器械灭菌过程的开发、确认和常规控制要求(中英文版) Sterilization of health care products—Moist heat—Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
|||
GB/T 21223.2-2015 老化试验数据统计分析导则 第2部分:截尾正态分布数据统计分析的验证程序(中英文版) Guide for the statistical analysis of ageing test data—Part 2: Validation of procedures for statistical analysis of censored normally distributed data |
|||
GB/T 27761-2011 热重分析仪失重和剩余量的试验方法(中英文版) Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers |
|||
GB/T 27752-2011 铀、钚和重铬酸钾标准溶液浓度的确认(中英文版) Validation of the strength of uranium reference solution, plutonium reference solution and potassium dichromate reference solution |
|||
GB/T 19974-2005 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌工艺的设定、确认和常规控制的通用要求(中英文版) Sterilization of health care products -- General requirement for characterization of a sterilizing agent and the development ,validation and routine control of a sterilization process for medical devices |
|||
GB/T 19973.2-2005 医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版) Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process |
找到:13條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |